Scribd
Upload
11 views5 pages

Rapport de Test

data sheet

Uploaded by

Rachid Abdelouassae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views5 pages

Rapport de Test

data sheet

Uploaded by

Rachid Abdelouassae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Test Report

Test Report 2.2


in accordance with We certify that the listed
items comply with the stated

EN 10204 requirements:

Item 1 Pipes

D20-D158 Raw material: Aluminium EN 755-2 AW-6060 T6

Material properties Test (AC name) Test standard Conditions Unit Results

Density: 2,7 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Linear expansion coefficient Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48
at 20°C: 23,4 µm/m°C

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

Item 2 Plastic bodies, nuts and inner parts

PF Series D20 - D50 Raw material: PA6-GF30

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 1,35 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48
(ISO1183-A dry conditions)

Melting temperature: 220 Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48
°C (ISO11357-1/-3 dry
conditions)

Thermo test 1 hr at 150°C to Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64
determine material quality
(ISO580)

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

www.airnet-system.com

AIRnet - C.Aria.C - Via Soastene 34 - IT-36040 Brendola - Italy


Item 3 Aluminium nipple sockets die casting

PF Series D20 - D50 Raw material: Aluminium EN 1706 AC-46100

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,65 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Yield strength: 140 Mpa Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

Item 4 Aluminium adapter unions

PF Series D20 - D50 Raw material: Aluminium EN755-2 AW-6082

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,7 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles N/A
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles

Item 5 Aluminium bodies and nuts die casting

PM Series D63 - 80 Raw material: Aluminium EN 1706 AC-43400

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,65 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Yield strength: 140 Mpa Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) 114 - 200

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) 72 - 80

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

www.airnet-system.com

AIRnet - C.Aria.C - Via Soastene 34 - IT-36040 Brendola - Italy


Item 6 Plastic inner parts

PM Series D63 - 80 Raw material: PA6-GF30

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 1,35 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48
(ISO1183-A dry conditions)

Melting temperature: 220 Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48
°C (ISO11357-1/-3 dry
conditions)

Thermo test 1 hr at 150°C to Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64
determine material quality
(ISO580)

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) 72-80

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

Item 7 Aluminium adapter unions

PM Series D63 - 80 Raw material: Aluminium EN755-2 AW-6082

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,7 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) 89-194

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles N/A


16 bar(g) (1 x MAWP) cycles

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) N/A

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles N/A
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles

Item 8 Aluminium pipe end adaptors

PM Series D63 - 80 Raw material: Aluminium EN755-2 AW-6026

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,7 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles N/A
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles

www.airnet-system.com

AIRnet - C.Aria.C - Via Soastene 34 - IT-36040 Brendola - Italy


Item 9 Aluminium bodies permanent mould casting

Bigger diameters D100-D158 Raw material: Aluminium EN 1706 AC-43100

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,68 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Yield strength: > 80 MPa Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles N/A
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles

Item 10 Equal Socket D100 – D158

Bigger diameters D100-D158 Raw material: Stainless Steel EN 10088 1.4301

Material Test (AC name) Test standard Conditions Unit Results


properties
Yield strength: > 200 MPa Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test EN ISO1167 48 bar(g) (3 x MAWP) bar(g) > 48

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

Item 11 Aluminium bodies die casting

Quickdrops D100-D158 Raw material: Aluminium EN 1706 AC-44500

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,65 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Yield strength: 140 Mpa Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) 123 - 153

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) 64 - 68

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

www.airnet-system.com

AIRnet - C.Aria.C - Via Soastene 34 - IT-36040 Brendola - Italy


Item 12 Plastic nuts and inner parts

Quickdrops D100-D158 Raw material: PA6-GF30

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 1,35 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48
(ISO1183-A dry conditions)

Melting temperature: 220 Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48
°C (ISO11357-1/-3 dry
conditions)

Thermo test 1 hr at 150°C to Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64
determine material quality
(ISO580)

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles > 3x10^6
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles > 3x10^6
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles > 3x10^6

Item 13 Aluminium adapter unions

Quickdrops D100-D158 Raw material: Aluminium EN755-2 AW-6082

Material Test (AC name) Test standard Conditions Unit Results


properties
Density: 2,7 g/cm³ Vacuum test logging IACS Req 2021 13 mbar(a) (mAWP) hr 48

Leak tightness test logging ASME B31.3 17,6 bar(g) (1,1 x MAWP) hr 48

Burst test IACS Req 2021 64 bar(g) (4 x MAWP - max 200 bar(g)) bar(g) > 64

Pulsation test NF T-54-094 24 bar(g) (1,5 x MAWP) cycles > 5000


16 bar(g) (1 x MAWP) cycles > 500 000

Disconnection test IACS Req 2021 64 bar(g) (4 x MAWP) bar(g) > 64

Vibration test IACS Req 2021 frequency 100 Hz - amplitude +/- 0,06 mm (MAWP) cycles N/A
frequency 45 Hz - amplitude +/- 0,5 mm (MAWP) cycles
frequency 10 Hz - amplitude +/- 1,5 mm (MAWP) cycles

www.airnet-system.com

AIRnet - C.Aria.C - Via Soastene 34 - IT-36040 Brendola - Italy

You might also like