QSK60-G6_merged

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Specification sheet

QSK60-G6

Description
CTT (Cummins Turbo Technologies) HX82/HX83
The QSK60 is a V 16 cylinder engine with a 60 litre
turbo-charging utilizes exhaust energy with greater
displacement. This Quantum series utilizes
efficiency for improved emissions and fuel consumption.
sophisticated electronics and premium engineering
to provide outstanding performance levels, Low Temperature After-cooling - Two-pump Two-loop
reliability and versatility for Standby, Prime and (2P2L).
Continuous Power applications. Ferrous Cast Ductile Iron (FCD) Pistons - High
strength design delivers superior durability.
Features G-Drive Integrated Design - Each component has
Cummins High Pressure Injection (HPI) PT full been specifically developed and rigorously tested for
authority electronic fuel system. The HPI PT G-Drive products, ensuring high performance, durability
fuel system is managed by a G-Drive Governor and reliability.
Control System (GCS) controller, which is provided Service and Support - G-Drive products are backed by
for off-engine mounting in the genset control panel. an uncompromising level of technical support and after
The Quantum Control has a specific fuel system sales service, delivered through a world class service
board to interface with the HPI-PT fuel system and network.
provides an Engine Protection package giving
greater customer flexibility and cost effective Coolpac Integrated Design - Products are supplied
alternatives in the control design and the benefits complete with cooling package and air cleaner kit for a
of Full Authority electronic control. complete power package. Each component has been
has been specifically developed and rigorously tested
for G-Drive products, ensuring high performance,
durability and reliability.

Codes and standards


This engine has been designed in
This engine has been built to facilities certified to ISO9001 and
comply with CE certification. manufactured in facilities certified to
ISO9001 or ISO9002.

1800 rpm (60 Hz Ratings)


Gross Engine Output Net Engine Output Typical Generator Set Output
Standby Prime Base
Standby Prime Base Standby Prime Base
(ESP) (PRP) (COP)
kWm/BHP kWm/BHP kWe kVA kWe kVA kWe kVA

2180/2923 1975/2648 1740/2333 2120/2843 1937/2598 1702/2282 2000 2500 1825 2281 1633 2042

Our energy working for you.™


www.cumminsgdrive.com
2015|Cummins G-Drive Engines|Specifications Subject to Change Without Notice|Cummins is a registered trademark of Cummins Inc.
EMERS-6132a-EN (8/15)
General Engine Data Ratings Definitions
4-cycle, Turbo Charged, Emergency Standby Power (ESP):
Type
After-cooled Applicable for supplying power to varying electrical load for the
Bore, mm 159 duration of power interruption of a reliable utility source.
Stroke, mm 190 Emergency Standby Power (ESP) is in accordance with ISO 8528.
Displacement, Litre 60.2 Fuel Stop power in accordance with ISO 3046, AS 2789,
Cylinder Block Cast iron, 16 cylinder DIN 6271 and BS 5514.
Battery Charging Alternator 55A
Starting Voltage 24V Limited-Time Running Power (LTP):
Fuel System Direct injection Cummins HPI Applicable for supplying power to a constant electrical load
Fuel Filter
Spin on fuel filters with water for limited hours. Limited-Time Running Power (LTP) is in
separator accordance with ISO 8528.
Lube Oil Filter Type(s) Spin on full flow filter
Lube Oil Capacity (l) 280 Prime Power (PRP):
Flywheel Dimensions SAE 0 Applicable for supplying power to varying electrical load for
unlimited hours. Prime Power (PRP) is in accordance with
Coolpac Performance Data ISO 8528. Ten percent overload capability is available in
accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514.
Cooling System Design 2 pump – 2 loop
Coolant Ratio 50% ethlene glycol; 50% water Base Load (Continuous) Power (COP):
Coolant Capacity (L) 490 Applicable for supplying power continuously to a constant
Limiting Ambient Temp.** 50 electrical load for unlimited hours. Continuous Power (COP)
Fan Power (kWm) 44 in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271
Cooling system air flow (m3/s)** 34 and BS 5514.
Dry replaceable element with
Air Cleaner Type
restriction indicator

Weight and Dimensions


Length Width Height Weight (dry)
mm mm mm kg
4979 2494 3201 9685

Fuel Consumption 1800 (60 Hz)


% kWm BHP L/ph US gal/ph
Standby Power
100 2180 2922 521 137.2
Prime Power
100 1975 2647 466 123.1
75 1481 1985 356 94.0
50 987 1324 247 65.3
25 494 662 144 38.1
Continuous Power
100 1740 2332 412 108.7

Cummins G-Drive Engines


Asia Pacific Europe, CIS, Middle Latin America Mexico North America
10 Toh Guan Road East and Africa Rua Jati, 310, Cumbica Cummins S. de R.L. de C.V. 1400 73rd Avenue N.E.
#07-01 Manston Park Columbus Ave Guarulhos, SP 07180-900 Eje 122 No. 200 Zona Industrial Minneapolis, MN 55432
TT International Tradepark Manston Ramsgate Brazil San Luis Potosí, S.L.P. 78090 USA
Singapore 608838 Kent CT12 5BF. UK Phone 55 11 2186 4552 Mexico Phone 1 763 574 5000
Phone 65 6417 2388 Phone 44 1843 255000 Fax 55 11 2186 4729 Phone 52 444 870 6700 Toll-free 1 877 769 7669
Fax 65 6417 2399 Fax 44 1843 255902 Fax 52 444 870 6811 Fax 1 763 574 5298

Our energy working for you.™


www.cumminsgdrive.com
2015|Cummins G-Drive Engines|Specifications Subject to Change Without Notice|Cummins is a registered trademark of Cummins Inc.
EMERS-6132a-EN (8/15)

You might also like