Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Shanmon Loader Product Specifications 11292024 (1)

    Uploaded by

    TherealBagsbunny
    MACHINERY SPECIFICATIONS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Shanmon Loader Product Specifications 11292024 (1)

    Uploaded by

    TherealBagsbunny
    3 views1 page
    MACHINERY SPECIFICATIONS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MACHINERY SPECIFICATIONS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views1 page

    Shanmon Loader Product Specifications 11292024 (1)

    Uploaded by

    TherealBagsbunny
    MACHINERY SPECIFICATIONS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ＳＨＡＮＭＯＮ388技术参数

    The Main Performance Parameter of Payloader ＳＨＡＮＭＯＮ388 - Php 2,660,000

    整机操作重量Overall Operating Weight 8200KG 轮边减速型式Final Reducer 一级轮边减速Single Stage Final Reducer

    运输尺寸Transport Dimension 额定桥载荷Rated Loader of Axle 8/18.5t

    长×宽×高mm L*W*H 6100×2365×3752 传动系统Transmission System


    轴距 Wheel base 2200mm 变矩器Torque Converter
    最小离地间隙 Min. Ground Clearance 300mm 型号Model YJ280
    装载斗容 Bucket Capacity 1.0m3 型式Type 单级、单相三元件Single-stage Three Elements
    掘起力Breakout Force 38KN 最高效率Max. Efficiency 84.40%
    装载举升能力Loading Lifting Capacity 2500KG 进口压力Inlet Pressure 1.3－1.5Mpa
    铲斗卸载高度Bucket Dumping Height 2742mm 出口压力Outlet Pressure 0.25－0.3Mpa
    铲斗卸载距离Bucket Dumping Distance 925mm 冷却方式Cooling Method 油冷压力循环Oil-cooling Pressure Circulation
    铲挖深度 Digging Depth 52mm 变速箱Gearbox
    反铲斗容Backhoe Capacity 0.3 m3 型式Type 定轴式动力换档Fixed Shaft Power Transmission
    最大挖掘深度Max. Digging Depth 4082/4500mm 离合器操纵油压Oil Pressure of Clutch 1373Kpa—1569 Kpa

    挖斗回转角Swing Angle of Excavator Grab 190o 档位数Gears 前进2档，后退2档Two forward, Two reverse gears

    最大牵引力Max. Pulling Force 39KN 最高车速Max.Speed 28Km/h


    发动机Engine 轮胎Tyre
    型号Model YC4A105Z-T20 规格Model 14-17.5/19.5L-24

    直列、直喷、四冲程、直喷燃
    烧室In Line Direct injection
    型式Type 前轮气压Pressure of Front wheel 0.55Mpa
    Four-Stroke and Injection
    Combustion Chamber

    气缸数-内径*行程Cylinder-Inside
    4-108×132 后轮气压Pressure of Back Wheel 0.223Mpa
    Diameter*Stroke
    额定功率Rated Power 75KW 制动系统Brake System
    额定转速Rated Speed 2200r/min 气顶油钳盘制动Air Over Oil Caliper Brake
    最低燃油率Min. Fuel Consumption ≤230g/km.h 外置式External Type
    行车制动Service Brake
    最大扭矩Max.Torque ≥400N.M 自调节Self-regulation
    排量Displacement 4.837L 自平衡Self-balance

    转向系统Steering System 操纵力实施制动Operation Power Implementing brake


    驻车/紧急制动Emergency Brake
    手操纵力解除制动Manual Operation Power
    转向器型号Model of Steering Device BZZ5-250
    Terminating Brake
    转向角Steering Angle ±36 o 液压系统Hydraulic System
    最小转弯半径Min. turning radius 6581mm 挖斗挖掘力Digging Power of Excavator Grab 46.5KN

    系统压力Pressure of the system 12Mpa 斗杆挖掘力Digging Power of Dipper 44KN


    驱动桥Axle 铲斗提升时间Bucket Lifting Time 6.8S
    前桥：肥城车桥厂Feicheng
    Axle Factory
    生产厂家Manufacturer 铲斗下降时间Bucket Lowering Time 3.1S
    后桥：肥城车桥厂Feicheng
    Axle Factory

    主传动型式Main Transmission Type 双级减速式Double Reduction 铲斗卸载时间Bucket Discharge Time 2.0S


    四合一斗
    注：以上参数如有变更，怒不另行通知。The parameters are subject to change without notice

    伸缩臂+1.5

    挖掘松土器+0.3万元

    You might also like