3850-Ionstorm-DS-Iss.6-EN

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

S TAT IC EL IMIN AT IO N 1

3850 IONSTORM STATIC ELIMINATORS

The 3850 Ionstorm system uses advanced pulsed DC


ionisation technology for static neutralisation at long
distances without air assistance.

Powered by the 3700-SC Ionstorm Controller, Ionstorm


Static Eliminator bars are available in two versions:

• 3850-SC (Standard) with emitters at 125 mm pitch.


• 3850 HP-SC (High Power) with emitters at 75 mm pitch.
PERFORMANCE

• 15 kV of ionising power.
• Effective range from 200 mm to over 1000 mm.
ESSENTIAL QUALITIES

• Adjustable settings on the Controller allow optimisation


of performance for range, polarity and power.

• Replaceable tungsten emitters guarantee an


unlimited life.
SPECIFICATION

Construction:

• Shockless operation.
Rigid easy-clean PVC body. Replaceable long-life tungsten emitters in
FR-ABS housing.

• Unique double wall separation of negative and positive


emitters to prevent surface conduction.
Output Voltage:
Adjustable 0 - 15 kV from the 3700-SC Ionstorm Controller.

Balance:
A balanced output can be set if the static charge varies. If the static charge
CONNECTIVITY AND CONTROL is constant, the balance can be adjusted 80:20 in each polarity for even
better performance.

• LEDs on Controller give indication of operational status. Cable:

• Controller settings are adjustable and lockable. In a protective nylon conduit, 2 m standard. Up to 10 m can be specified provided
that it is within maximum load. Screw connectors for fast connection to the

• Duplicate remote signals for PLC or to power external


lamps, relays.
3700-SC Ionstorm Controller.

Remote Operation:
On/Off and Alarm via the 6-pin mini-DIN connector on the 3700-SC
Ionstorm Controller.

APPLICATIONS Electrical Input:


115/230 V AC, 50/60 Hz. 24 V DC.

• Long-range applications where the customer can


manually adjust the output to suit the requirements.
Environmental:
60 ºC max. 70 % rH non-condensing max.

• The extra power of the 3850 HP-SC makes it suitable


for most industrial applications. The 3850-SC is used in
Options:
Bars joined in series.
3850-SC Connector Box (2:1 and 4:1 options) allows multiple bars to be powered
wide area neutralisation where the static charges from one 3700-SC Ionstorm Controller. See separate Datasheet.
are lower.

Fraser Anti-Static Techniques Ltd | Scotts Business Park, Bampton, Devon, EX16 9DN, UK
T +44 (0) 1398 331 114 E [email protected] W www.fraser-antistatic.com
© Fraser Anti-Static Techniques Ltd 2020 | 3850-Ionstorm DS - Iss.6 - EN
S TAT IC EL IMIN AT IO N 2

HOW IT WORKS

Powered by a 3700-SC Ionstorm Controller, the 3850 Ionstorm


Static Eliminator emits positive and negative ions from dedicated
emitters. The pulsing action propels the ions towards the object to
be neutralised.
A slow frequency can be set for distances up to 1000 mm, and a
faster frequency for closer distances, e.g. 300 mm.
The ionised air supplies ions to neutralise the charge in the
object. The higher the static charge, the more ions are attracted 59 mm

by the object.

M6 x 40 mm
3850-SC

54 mm
Standard bar with emitters at 125 mm pitch. Lengths in multiples of
250 mm up to 5000 mm: 250 mm, 500 mm, 750 mm, etc.

3850 HP-SC
Higher performance version with emitters at 75 mm pitch. Better
than the standard 3850-SC at all ranges up to 750 mm. Available in
lengths of 175 mm, 300 mm, 400 mm, 500 mm and then in multiples M6 x 40 mm
of 150 mm up to 5000 mm: 650 mm, 800 mm, 950 mm, etc.

DIMENSIONS AND CONSTRUCTION

Dimensions: 59 mm x 54 mm (WxH). Maximum length of 5000 mm in one rigid bar. Can be joined together to make bars up to 10000 mm.
Mounting: Adjustable M6 x 40 mm ‘T’ fixings in slot.
Maximum Load per 3700-SC Controller: 3850-SC - 15 m of bar and cable. 3850 HP-SC - 12 m of bar and cable.

3850-Ionstorm DS - Iss.6 - EN

You might also like