Scribd
Upload
12 views

LABORATORY WORK 6

SDFASDF

Uploaded by

David Gutiérrez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
12 views

LABORATORY WORK 6

SDFASDF

Uploaded by

David Gutiérrez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Professional Semester

TECMILENIO UNIVERSITY

Laboratorio de Sistemas
Integrados de Manufactura
Laboratory Work 6 – Milling

Name: David Andres Gutierrez Orozco

Matricula: T02984977

Professor: Christian Ulises Estrada Cepeda

September 19th, 2024


Professional Semester
Workpiece machined on the CNC milling machine.
Professional Semester

G CODE
 %
 O22211
 (Using high feed G1 F5000. instead of G0.)
 (T1 D=0.1875 CR=0. - ZMIN=-0.08 - fresa con punta plana)
 N10 G90 G17
 N15 G20
 (When using Fusion for Personal Use, the feedrate of rapid)
 (moves is reduced to match the feedrate of cutting moves,)
 (which can increase machining time. Unrestricted rapid moves)
 (are available with a Fusion Subscription.)
 (2D Cajeras1)
 N20 T1 M6
 N25 S2500 M3
 N30 G54
 N35 G17 G90
 N40 G1 X2.5779 Y1.7241 F5000.
 N45 G0 G43 Z0.6 H1
 N50 G1 Z0.2 F40.
 N70 X2.5887 Y1.7267 Z0.1016
 N75 X2.5953 Y1.7291 Z0.1
 N80 G3 X2.5879 Y1.7265 Z0.0807 I-0.0329 J0.0828
 N85 X2.5804 Y1.7246 Z0.0615 I-0.0255 J0.0853
 N90 X2.5727 Y1.7234 Z0.0422 I-0.018 J0.0872
 N95 X2.565 Y1.7228 Z0.0229 I-0.0103 J0.0885
 N100 X2.5572 Y1.7229 Z0.0036 I-0.0026 J0.089
 N105 X2.5495 Y1.7237 Z-0.0156 I0.0052 J0.0889
 N110 X2.5419 Y1.7252 Z-0.0349 I0.0129 J0.0881
 N115 X2.6503 Y1.7976 Z-0.04 I0.0206 J0.0867
 N120 G2 X2.7216 Y1.9897 I0.5247 J-0.0853 F40.
 N125 G3 X2.7222 Y2.0117 I-0.0189 J0.0115
 N130 G2 X2.7004 Y2.058 I0.4043 J0.2182
 N135 G1 X2.6996 Y2.0594
 N140 X2.6984 Y2.0604
 N145 X2.6969 Y2.061
 N150 X2.6953 Y2.0612
 N155 X2.6937 Y2.0608
 N160 X2.6923 Y2.0599
 N165 X2.6913 Y2.0586
 N4840 X1.8131 Z-0.0256
 N4845 X1.8108 Z-0.0233
 N4850 X1.8089 Z-0.0206
 N4855 X1.8075 Y1.4095 Z-0.0177
 N4860 X1.8067 Z-0.0145
 N4865 X1.8064 Z-0.0113
 N4870 Z0.6
 N4875 M5
 N4880 G0 X2.
 N4885 M30
 %
Professional Semester
Conclusion:

This activity helped me learn how to generate G-code based on a model created in
CAD software, in this case, NX. Once the model was created, we followed a series
of instructions to generate the G-code. After the G-code was generated, we loaded
it into the CNC mill, and I learned very well that I need to secure the tool holder, not
just the bit.

You might also like