Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    LA 6010 SMAW_E_2

    Uploaded by

    kurtbrianbowser
    Air Liquide E6010 Welding Electrode data sheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LA 6010 SMAW_E_2

    Uploaded by

    kurtbrianbowser
    3 views1 page
    Air Liquide E6010 Welding Electrode data sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Air Liquide E6010 Welding Electrode data sheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views1 page

    LA 6010 SMAW_E_2

    Uploaded by

    kurtbrianbowser
    Air Liquide E6010 Welding Electrode data sheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    BLUESHIELD™ LA 6010

    Mild Steel Electrode


    SMAW

    CSA W48, Class E4310


    Standards
    AWS A5.1/ASME SFA 5.1, Class E6010

    Description & Applications


    This all position electrode is used for producing very high quality welds. It has a cellulosic covering which produces
    a forceful, deep penetrating arc and a thin friable easily removed slag. BLUESHIELD LA 6010 yields welds that
    possess excellent mechanical properties. As it can be used in all positions, it finds wide usage in structural work,
    pressure vessels, ship-building and pipeline welding and is sometimes used on galvanized steel.
    • It is ideally suited for root/hot pass welding pipe.
    • Also suitable for maintenance work on dirty or rusty material.

    The BLUESHIELD Advantage


    • Maintains a forceful deep penetrating arc throughout the entire length of electrode.
    • Weld puddle easily controlled. - Excellent strike and re-strike.
    • Stable arc characteristics combined with good wetting action and fast freezing weld puddle.

    Typical Welding Parameters


    • Use only direct current electrode positive. DIAMETER AMPERAGE OPTIMUM
    • Maintain a short to medium arc length. mm in RANGE CURRENT
    • Use a slight whipping motion to control 2.5 3/32 50 – 85 75
    bead sag on out-of-position welds. 3.2 1/8 80 – 140 115
    • Stringer, bead, or weave technique 4.0 5/32 110 – 170 140
    can also be used.
    5.0 3/16 130 – 215 180
    • To maximize the penetration, use a short
    arc length with the electrode inclined 20° in the direction of travel.

    Typical Chemistry
    C Cr Ni Mo P S Mn Si Nb Ta V Cu Ti
    0.16 0.06 0.08 0.01 – – 0.45 0.18 – – 0.01 – –

    Typical Mechanical Properties*


    AS WELDED
    TENSILE STRENGTH 574 MPa 74.5 ksi
    YIELD STRENGTH 424 MPa 61.5 ksi
    ELONGATION 25.2 % 25.2 %
    IMPACT (Charpy V-notch)
    TEST TEMPERATURE -30°C -20°F
    ENERGY 49 J 37 ft-lb
    * Actual welding positions and procedures can impact results.

    Packaging
    DIAMETER LENGTH PACKAGING ITEM
    mm in mm in kg lb NUMBER
    2.5 3/32 300 12 4 x 2.5 4 x 5.5 BLU-30971106
    3.2 1/8 350 14 4x5 4 x 11 BLU-30971108
    4.0 5/32 350 14 4x5 4 x 11 BLU-30971110
    5.0 3/16 350 14 4x5 4 x 11 BLU-30971112

    1-8 blueshield.ca

    You might also like