NOVEMBER-DECEMBER 2002 VOL. 99 N°.

521 Corrosion Behavior of Reinforcement in Slag Concrete/ S. C. Pal, A. Mukherjee, and S. R. Pathak

528 Influence of Aggregate Type on Mechanical Behavior of Normal- and High-Strength Concretes/ O. Sengul,
C. Tasdemir; and M. A. Tasdemir

534 Concrete Hydration and Mechanical Properties under Nonisothermal Conditions/ I. Pane and W. Hansen

543 Impact Response of Ultra-High-Strength Fiber-Reinforced Cement Composite/ V Bindiganavile, N. Banthia,

and B. Aarup

549 Rheological Model for Self -Consolidating Concrete/ V K. Bui, Y. Akkaya, and S. P. Shah

560 Mechanical Properties and Durability of Concrete Made with High- Volume Fly Ash Blended Cement
Produced in Cement Plant /N. Bouzoubaa, B. Foumier; V. M. Malhotra, and D. M. Golden

568 Three-Dimensional Aggregate Density in Concrete with Wall Effect/ J. J. Zheng and C. Q. Li

576 New Technique Based on Stress Waves for Measuring Cover Thickness of Closely Spaced Reinforcing
Bars/ J. Liou, Y. Lin, and C. Hsiao

584 Laboratory Evaluation and Field Application of Concrete Reinforcement with Aramid Fiber-Reinforced
Polymer Bars/ P. Soroushian, S. Ravanbakhsh, and M. A. Nagi

591 Prediction of Setting Time of Fly Ash Concrete/ J. J. Brooks

SEPTEMBER – OCTOBER 2002 – VOL. 99 N° 5

425 Flexural Behavior of Fiber Mesh-Reinforced Concrete with Glass Aggregate/B. Mu and C. Meyer

435 Mixed Mode I-III Fracture Testing of Cement Mortar / K.W. Lo, K. Zhong, T. Tamilselvan, K.C.G. Ong,
and T. H. Wee.

441 Estimation of Diffusion Coefficients for Chloride Ion Penetration into Structural Concrete/ A.K.
Suryavanshi, R. N. Swamy, and G. E. Cardew

450 Nonlinear Creep, Poisson’s Ratio, and Creep-Damage Intereaction of Concrete in Compression/C. Mazzotti
and M.Savoia

458 Ultrasonic Technique for Monitoring Concrete Strength Gain at Early Age/ K.V. Subramaniam, J.P.
Mohsen, C. K.Shaw, and S.P. Shah.

463 Interface Tailoring for Strain- Hardening Polyvinyl Alcohol- Engineered Cementitious Composite (PVA-
ECC)/V.C. Li, C. Wu, S. Wang, A. Ogawa, and T. Saito.

473 Shear Strengh of Steel Fiber-Reinforced Concrete/ A.A. Mirsayah and N. Banthia.
480 Alkali-Silica Reaction Mitigation: State of the Art and Recommendations/ L. J. Malvar, G. D. Cline, D. F.
Burke, R. Rollings, T.W. Sherman, and J. L. Greene.

490 Development of Deformable Protective System for Underground Infrastructure Using Cellular Grouts / M.
Nehdi, A. Khan, and K. Y. Lo

499 Durability of Ternary Blend Concrete with Silica Fume and Blast-Furnace Slag: Laboratory and Outdoor
Exposure Site Studies / R. Bleszynski, R. D. Hooton, M. D. A. Thomas, and C. A. Rogers

JULY-AUGUST 2002 VOL. 99 N°. 4

337 Application of Fibrillated Polypropylene Fibers for Restraint of Plastic Shrinkage Cracking in Silica Fume
Concrete/ Z. Bayasi and M. McIntyre

345 Effect of Large-Diameter Polymeric Fibers on Shrinkage Cracking of Cement Composites /

H. Najm and P. Balaguru

352 Microstructures and Interfaces in Concrete after 15 Years of Exposure in Tidal Environment/
T. U. Mohammed, T: Yamaji, and H. Hamada

361 Shock Vibration Test of Concrete/A. K. H. Kwan, W Zheng, and P. K. K. Lee

371 Solution Tests of Corrosion-Inhibiting Admixtures for Reinforced Concrete/M. C. Brown, R. E. Weyers, and
M. M. Sprinkel

379 Permeability of Cracked Hybrid Fiber-Reinforced Mortar under Load/ J. S. Lawlet; D. Zampini, and S. P.
Shah

386 Lap Splice Length and Fatigue Perfomance of Fiber-Reinforced Polymer Laminates /X. Yang and A. Nanni

393 Effects of Metakaolin and Silica Fume on Properties of Concrete/ J.-T. Ding and Z. Li

399 Effect of High Temperature on Residual Mechanical Properties of Confined and Unconfined High-Strength
Concrete/ B. Wu, X.-p. Su, H. Li, and J. Yuan

408 Air- Void Stability in Self-Consolidating Concrete/K. H. Khayat and J. Assaad

MAY-JUNE 2002 VOL. 99 N° 3

217 Residual Fracture Toughness of Normal- and High –Strength Gravel Concrete after Heating to 600 °C,
B Zhang and N. Bicanic

227 Effect of Cement Alkalinity on Pore Solution Chemistry and Chloride-Induced Reinforcement Corrosion/H.
A. F. Dehwah, M. Maslehuddin, and S. A. Austin

234 Influence of Thixotropy on Stability Characteristics of Cement Grout and Concrete / K. H. Khayat, M. Saric-
Coric, and F. Liotta

242 Noninvasive Surface Measurement of Corrosion Impedance of Reinforcing Bar in Concrete – Part 2:
Forward Modeling/ J. Zhang, P. J. M. Monteiro, and H. F. Morrison

250 Stress- Strain Relationship for Concrete Confined by Lateral Steel Reinforcement / H. K. Cheong and H.
Zeng

256 Chloride Diffusion, Microstructure, and Mineralogy of Concrete after 15 Years of Exposure in Tidal
Environment/ T. U. Mohammed, T. Yamaji, and H. Hamada
264 Optimizing Self-Consolidating Concrete with Limestone Filler by using Statistical Factorial Design
Methods/ A. Ghezal and K. H. Khayat

273 Damage Assessment of Concrete Bridge Decks using Impact-Echo Method / W. F. Tawhed and S. L.
Gassman

282 Ground- Penetrating Radar Signal Modeling to Assess Concrete Structures/A. Loulizi, I. L. Al-Qadi, and S.
Lahouar

292 A New Nondestructive Inspection Technique for Reinforced Concrete Beams / Y. Jung, T. Kundu, and M. R.
Ehsani

300 Removal and Reuse of Hardened Concrete (555R-01) / ACI Committee 555

MARCH-APRIL 2002 VOL. 99 N°. 2

119 Standardization, to a Reference of 25 °C, of Electrical Resistivity for Mortars and Concretes in Saturated or
Isolated Conditions/ M. Castellote, G. Andrade, and M. G. Alonso

129 Carbon Fiber-Reinforced Polymer Wraps for Corrosion Control and Rehabilitation of Reinforced Concrete
Columns/ A. S. Debaiky, M. F. Green, and B. B. Rope

138 Effect of Ultrafine Particles on Heat of Hydration of Cement Mortars /

E. H. Kadri and R. Duval

143 Patch Repair and Macrocell Activity in Concrete Structures/

F. Pruckner and O. E. Gjorv

149 Chloride-Induced Corrosion of Steel Bars in Concrete with Presence of Gap at Steel-Concrete Interface/
T: U. Mohammed, N. Otsuki, H. Hamada, and T. Yamaji

157 Long- Term Strength Development of Controlled Low-Strength Material/

C. E. Pierce, S. L. Gassman, and T: M. Richards

165 Cracking in Precast, Prestressed Deck Planks in Two Bridges: Causes of Cracking, Concrete Characteristics,
and Rehabilitation Options/ A. Shayan and H. Morris

173 Hydration, Rheology, and Strength of Ordinary Portland Cement (OPC)- Cement Kiln Dust (CKD)-Slag
Binders/ K. Wang, M. S. Konsta-Gdoutos, and S. P. Shah

180 Behavior and Modeling of Concrete Subject to Variable Confining Pressure/

K. A. HamesandG. Kharel

190 Microscopic Characterization of Ice Morphology in Entrained Air Voids/

D. J. Corr, P. J. M. Monteiro, and J. Bastacky

196 Pore Structures, Permeabilities, and Compressive Strengths of Concrete at Temperatures up to 800 ºC /
I. Janotka and L. Bágel

201 Effects of Curing on Chloride Ingress and Implications on Service Life/

R. D. Hooton, M. R. Geiker, and E. C. Bentz

JANUARY-FEBRUARY 2002 VOL. 99 N°. 1

3 Early-Age Creep and Shrinkage of Blended Cement Concrete/ H. Li, T. H. ,Wee, and S. F. Wong
11 Flexural Behaviors of Glass Fiber-Reinforced Polymer (GFRP) Reinforced Engineered Cementitious
Composite Beams/ V. C. Li and S. Wang

22 Effect of Exposure to Elevated Temperature on Polypropylene Fiber-Reinforced Concrete/ Z. Bayasi and M.

Al Dhaheri

27 Estimation of Chloride Ingress in Uncracked and Cracked Concrete Using Measured Surface Concentrations/
J. Poulsson-Tralla and J. Silfwerbrand

37 Determination of Elastic Properties of High-Performance Concrete at Early Ages/ H. A. Mesbah, M.

Lochemi, and P.-C. Aïtcin

42 Residual Strength of Reinforced Concrete Beams Damaged by Alkali- Silica Reaction-Examination of

Damage Rating Index Method/ L. J. Monette, N. J. Gardner, and P. E. Grattan-Bellew

51 Decreased Corrosion Initiation Time of Steel in Concrete due to Reinforcing Bar Obstruction of Diffusional
Flow /S. C. Kranc, A. A. Sogiiés, and F. J. Presuel-Moreno

54 Effects of Test Conditions and Mixture Proportions on Behavior of High-Strength Concrete Exposed to High
Temperatures/ L. T. Phan and N. J. Carino

67 Public Discussion and Closure of Proposed Revisions to Specification for the Construction of Drilled Piers
(ACI 336.1-01)

68 Public Discussion and Closure of Guide to Formwork of Concrete (ACI 347-01)

70 Public Discussion and Closure of Tightness Testing of Environmental Engineering Concrete Structures and
Commentary (ACI 350.1/350.1 R-01)

73 Public Discussion and Closure of Seismic Design of Liquid-Containing Concrete Structures and
Commentary (ACI 3S0.3/3S0.3R-0l)

104 Public Discussion and Closure of Specification for Unbonded Single Strand Tendons and Commentary
(ACI 423.6/423.6R-0l)

NOVEMBER-DECEMBER 2001 VOL. 98 N°. 6

429 New Methodology for Designing Self-Compacting Concrete/ A. W: Saak, H. M. Jennings, and S. P. Shah

440 Creep, Shrinkage, and Modulus of Elasticity of High-Performance Concrete/ X. S. Huo, N. AI-Omaishi, and
M. K. Tadros

450 Ultrasonic Pulse Velocity in Concrete Using Direct and Indirect Transmission /I. O. Yaman, G. Inci, N.
Yesiller; and H. M. Aktan

458 Plastic Shrinkage Cracking in Concrete Materials-Influence of Fly Ash and Fibers/K. Wang, S. P. Shoh, and
P. Phuoksuk

465 Measuring Three-Dimensional Damage in Concrete under Compression/ J. S. Lawler, D. X Keane, and S. P.
Shah

476 Workability of Cement Pastes/ P. A. Claisse, P. Lorimer; and M. Al Omari

483 Tensile Strain-Hardening Behavior of Polyvinyl Alcohol Engineered Cementitious Composite (PVA-ECC)/
V. C. Li, S. Wang, and C. Wu

493 Optimizing Mixture Proportions for Flowable High-Performance Concrete via Rheology Tests/
C.- W. Tang, T Yen, C.-S. Chang, and K.-H. Chen
SEPTEMBER- OCTOBER 2001 VOL. 98 N° 5

365 Dynamic Property Determination for Early-Age Concrete/ X. Jin and Z. Li

371 Structural Performance and In-Place Properties of Self-Consolidating Concrete Used for Casting Highly
Reinforced Columns / K. H. Khayat, P. Paultre, and S. Tremblay

379 Hidration, Strength, and Microstructural Development of High Early-Strength C4 A3 S Activated Burnt Oil
Shale-Based Cement System/ C.S.B. Paglia, F. J. Wombacher, and H. K. Böhni

386 Tensile Basic Creep: Measurements and Behavior at Early Age/ S. A. Altoubat and D. A. Lange

394 Predicting Performance of Self-Compacting Concrete Mixtures Using Artificial Neural Networks / M.
Nehdi, H. El Chabib, and M. H. El Naggar

402 Neural Network Model for Preformed-Foam Cellular Concrete/ M. Nehdi, Y. Djebbar, and A. Khan.

410 Fracture Energy of High-Strength Concrete/ D. Darwin, S. Barham, R. Kozul, and S. Luan

JULY-AUGUST 2001 VOL. 98 N°. 4

289 Effect of Mixture Composition on Washout Resistance of Highly Flowable Underwater Concrete/
K. H. Khoyat and M. Sonebi

296 Grouts for Bonded Post- Tensioning in Corrosive Environments/

A. J. Schokker, J. E. Breen, and M. E. Kreger

306 Flexural Fatigue Analysis of Steel Fiber-Reinforced Concrete/

S. P. Singh and S. K. Kaushik

313 Electrical Impedance Spectra to Monitor Damage during Tensile Loading of Cement Composites/
A. Peled, J. M. Torrents, T. O. Mason, S. P. Shah, and E. J. Garboczi

323 Creep, Shrinkage, and Cracking of Restrained Concrete at Early Age/

S. A. Altoubat and D. A. Lange

332 Effects of Thermal Loads on Concrete Cover of Fiber-Reinforced Polymer Reinforced Elements: Theoretical
and Experimental Analysis/ M. A. Aiello, F. Focacci, and A. Nanni

340 Kinetics of Reaction of Calcium Hydroxide and Fly Ash/

J. J. Biernocki, P. J. Williams, and P. E. Stutzman

350 Ettringite in Hydration of Portland Cement Concrete and its Occurrence in Mature Concretes/
C. Famy and H. F. W. Taylor

MAY-JUNE 2001 VOL. 98 N° 3

213 Postpeak Strain-Stress Relationship for Concrete in Compression/ S. M Palmquist and D. C. Jansen

220 Influence of Aggregate Size on Strain- Rate Tensile Behavior of Concrete / E. Cadoni, K. Labibes, M. Berra,
M. Giangrasso, and C. Albertini

224 Corrosion Test with Concrete Containing Salts of Alkenyl-Substituted Succinic Acid / M. Allyn, Jr. and G.
C. Frantz
233 Effect of Mixture Composition on Relative Strength of Higly Flowable Underwater Concrete / M. Sonebi
and K.H. Khayat

240 Effect of Corrosion- Inhibiting Admixtures on Material Properties of Concrete / M. C. Brown, R. E. Weyers,
and M. M. Sprinkel

251 Effects of High Alkalinity on Cement Pastes / M. C. Carci Juenger and H. M.Jennings

256 Bond of Fiber-Reinforced Polymer Laminates to Concrete / L. De Lorenzis, B. Miller, and A. Nanni

265 Ultrasonic Testing of Damage in Concrete under Uniaxial Compression / C. L. Nogueira and K. J. Willam

MARCH-APRIL 2001 VOL. 98 NO. 2

99 Sulfate Attack of Concrete: Reliability Analysis/

D. J. Corr, P. J. M. Monteiro, K. E. Kurtis, and A. Der Kiureghian

105 Reinforced Concrete Jacketing for Masonry Columns with Axial Loads/
Y. C. Kog, K. C. G. Ong, C. H. Yu, and A. P. V. Sreekanth

116 Noninvasive Surface Measurement of Corrosion Impedance of Reinforcing Bar in Concrete-Part 1:

Experimental Results/ J. Zhang, P. J. M. Monteiro, and H. F. Morrison

126 Leachability of Trace Metal Elements from Fly Ash Concrete: Results from Column-Leaching and Batch-
Leaching Tests/ M.-H. Zhang, M. C. Blanchette, and V. M. Malhotra

137 Concrete Repair Material Performance-Laboratory Study/

R. W. Poston, K. Kesner, J. E. McDonald, A. M. Vaysburd, and P. H. Emmons

148 Effect of Controlled Permeability Formwork (CPF) on White Concrete/ J. S. Coutinho

159 Design Provisions for Drying Shrinkage and Creep of Normal-Strength Concrete/N. J. Gardner and M. J.
Lockman

168 Enhancing Fracture Toughness of High-Performance Carbon Fiber Cement Composites/M. M. Reda Taha
and N. G. Shrive

179 Effect of Aggregate Deformation on Alkali-Silica Reaction/

P. J. M. Monteiro, K. Shomglin, H. R. Wenk, and N. P. Hasparyk

184 Resistance of Blended Cement Pastes to Leaching in Distilled Water at Ambient and Higher Temperatures/
T. H. Wee, J. Zhu, H. T. Chua, and S. F. Wong

194 Effects of Prolonged Mixing and Retempering on Properties of Controlled Low-Strength Material (CLSM)/
S. L. Gossmon, C. E. Pierce, and A. J. Scllroeder

NOVEMBRE-DECEMBER 2000 VOL. 97 N°. 6

629 Acoustic Emission Monitoring of Fracture of Fiber-Reinforced Concrete in Tension/F. Li and Z. Li

637 Interaction between Loading, Corrosion, and Serviceability of Reinforced Concrete/

S. Yoon, K. Wang, W. J. Weiss, and S. P. Shah

645 Time Frequency Analysis of Impact-Echo Signals: Numerical Modeling and Experimental Validation/
O. Abraham, C. Léonard, P. ClJte, and B. Piwakowski

658 Flexural Fatigue Life Distributions and Failure Probability of Steel Fibrous Concrete/
S. P. Singh and S. K. Koushik
668 Monitoring Water and Ionic Penetration into Cover-Zone Concrete/ W. J. McCarter and M. Chrisp

675 Using Ultrasound to Monitor Stiffening Process of Concrete with Admixtures/

J. R. Ropoport, J. S. Popovics, S. V. Kolluru, and S. P. SlIoll

684 High-Strength Concrete in Triaxial Compression by Different Sizes of Specimens/ Q. Li and F. Ansan

690 Corrosion Initiation of Reinforcing Steel in Concrete under Natural Salt Spray and Service Loading-Results
and Analysis/ C. Q. Li

698 Properties of Controlled Low-Strength Material Containing Foundry Sand/

P. Tikalsky, M. Gaffney, and R. Regan

703 Environmental Aging of Fiber-Reinforced Polymer-Wrapped Concrete Cylinders/

S. Kshirsogor, R. A. LQpez-Anido, and R. K. Gupto

SEPTEMBER-OCTOBER 2000 VOL. 97 N°. 5

509 High Content of Fly Ash (Class F) in Extruded Cementitious Composites/ A. Peled, M. R Cyr; and S. P.
Shah

518 Long- Term Mechanical Properties and Durability Characteristics of High-Strength/High-Performance

Concrete Incorporating Supplementary Cementing Materials under Outdoor Exposure Conditions/ V. M.
Malhotra, M.-H. Zhang, P. H. Read, and J. Ryell

526 Optimization and Performance of Air-Entrained, Self- Consolidating Concrete/ K. H. Khayat

536 Sulfate Resistance of Concrete Containing Mineral Admixtures/

T. H. Wee, A. K. Suryavanshi, S. R Wong, and A. K. M. A. Rahman

550 Assessment of Toughness of Concrete Subject to Elevated Temperatures from Complete Load-Displacement
Curve- Part I: General Introduction/ B. Zhang, N. Bicanic, C. J. Pearce, and G. Balabanic

556 Assessment of Toughness of Concrete Subject to Elevated Temperatures from Complete Load-Displacement
Curve- Part II: Experimental Investigations/B. Zhang, N. Bicanic, C. J. Pearce, and G. Balabanic

567 Estimation of Water Flow through Cracked Concrete under Load/ C.-M. Aldea, M. Ghandehari, S. P. Shah,
and A. Karr

576 Determination of Free Silicon Content in Silica Fume and Its Effect on Volume of Gas Released from
Mortars Incorporating Silica Fume/ M.-H. Zhang, V. M. Malhotra, and J. Wolsiefet; Sr.

587 Autogenous Shrinkage of Ground-Granulated Blast-Furnace Slag Concrete/ S. N. Lim and T. H. Wee

594 Numerical Modeling of Alkali-Activated Slag Concrete Beams Subjected to Restrained Shrinkage/R Collins
and J. G. Sanjayan

603 Strength of Slag-Cement Concrete Cured in Place and in Other Conditions/ J. G. Sanjayan and B. Sioulas

612 Evaluation of Internal Restrained Strain in Concrete Members at Early Age/ H. R. Lu, S. Swaddiwudhipong,
and T. H. Wee

JULY-AUGUST 2000 VOL. 97 NO. 4

409 Long- Term Performance of Steel Reinforcing Bars in Portland Cement Concrete and Concrete
Incorporating Moderate and High Volumes of ASTM Class F Fly Ash/V. M. Malotra, M. H. Zhang, and G.
H. Leaman

418 Effect of Polycarboxylate Superplasticizer on Contribution of Interfacial Transition Zone to Electrical

Conductivity of Portland Cement Mortars/ G. Xu and J. J. Beaudoin
425 Studies on Galvanized Carbon Steel in Ca(OH)2 Solutions/ B. S. Haran, B. N. Popov, M. F. Petrou, and R.
E. White

432 Shinkage Cracking in Polyolefin Fiber-Reinforced Concrete/ N. Banthia and C. Yan

438 Early-Age Cracking in Reconstructed Concrete Bridge Barrier Walls/ D. Cusson and W. L. Repette

447 Factors Influencing Fracture Behavior of Old-New Concrete Bonds/

E. K. Tschegg, M. Ingruber, C. H. Surberg, and F. Munger

454 Influences of Bending Crack and Water-Cement Ratio on Chloride-Induced Corrosion of Main Reinforcing
Bars and Stirrups/ N. Otsuki, S.-i. Miyazato, N. B. Dila, and H. Suzuki

465 Effects of Nitrite-Based Corrosion Inhibitor on Concrete's Rapid Chloride Permeability Values and its
Dielectric Properties/ A. Loulizi, I. L. Al-Qadi, and B. K. Diefenderfer

472 Rheological Behavior and Setting Time of Microfine Cement- Based Grouts/ S. Perret, D. Palardy, and G.
Ballivy

479 Influence of Mortar Rheology on Aggregate Settlement/ M. F. Petrou, B. Wan, F. Gadala-Maria, V. G.

Kolli, and K. A. Horries

486 Effect of Silica Fume and Rice Husk Ash on Alkali-Silica Reaction/ N. P. Hasparyk, P. J. M. Monteiro, and
H. Carasek

493 Effect of Moisture Content on Water Transport in Silica Fume Concrete/ J. M. Aldred, S. Swaddiwudhipong,
S. L. Lee, and T: H. Wee

MAY-JUNE 2000 VOL. 97 N°. 3

245 Application of Continuum Damage Mechanics to Carbon Fiber-Reinforced Cement Composites/ M.

Boulfiza, N. Bantia, and K. Sakai

254 Performance of Reinforcing Steel in Concrete Containing Silica Fume and Blast-Furnace Slag Ponded with
Sodium Chloride Solution/ P. Gu, J. J. Beaudoin, M.-H. Zhang, and V. M. Malhotra

263 Time-Dependent Properties of High-Strengh Concrete with Consideration for Precast Applications/
A. Mokhtarzadeh and C. French

272 Laboratory and Field Testing of Concrete Bond Development for Expedited Bonded Concrete Overlays/
N. J. Delatte, Jr., D. M. Wade and D. W. Fowler

281 Mixture Proportioning Methodology for Structural Sand- Lightweight Concrete/ C. Videla and M. López

290 Dynamic Properties of Mass Concrete Obtained from Dam Cores/ D. W. Harris, C. E. Mohorovic, and T. P.
Dolen

297 Active Confinement of Concrete Members with Self-Stressing Composites/ N. Krstulovic-Opara and P. D.
Thiedeman

309 Characteristics of Microhydrates Formed under Steam Condition/ W.-M. Lin, C. L. Hwang, and Y: N. Peng

325 Impact of Coarse Aggregates on Transverse Crack Performance in Jointed Concrete Pavements/
N. Buch, M. A. Frabizzio, and J. E. Hiller

333 Cement-Based Materials Improved by Surface- Treated Admixtures/ Y. Xu, and D. D. L. Chung

343 Nondestructive Evaluation Using Numerical Simulation of Impact Response/ C. M. Newtson and M. O.
Eberhard
351 Fibers, Percolation, and Spalling of High-Performance Concrete/D. P. Benlz

360 Physical Properties of Concrete with Vitrified Coarse Aggregate/

D. C. Jansen, S. M. Palmquist, C. Swan, D. Al-Mufarrej, B. Arya, and C. O. D'Annunzio

367 Prediction Relations for Compressive Strength of Aerated Concrete/ N. Narayanan and K. Ramamurthy

374 Performance of Self-Consolidating Concrete for Casting Basement and Foundation Walls/
K. H. Khayat, J. Bickley, and M. Lessard

381 Energetic-Statistical Size Effect in Quasibrittle Failure at Crack Inflation/ Z. P. Bazant and D. Novák

393 Effect of Sand Addition on Properties of Fiber-Reinforced Cement Composites/

Y. Akkaya, A. Peled, J. D. Picka, and S. P. Shah

MARCH-APRIL 2000 VOL. 97 N° 2

99 Manufacture of Concrete Test Panels and their Performance after Seven Years of Exposure in Arctic Marine
Environment/ V. M. Malhotra, M. H. Zhang, and S. L. Sarkar

108 Mechanical Properties of High-Strength Concrete Incorporating Carrier Fluidifying Agents/

S. Y. N. Ghan, N.-Q. Feng, and M. K. C. Tsang

115 Rebound in Dry-Mix Shotcrete: Influence of Type of Mineral Admixture/ V. Bindiganavile and N. Banthia

120 Influence of Curing Conditions on Concrete Specimens at Construction Site/M. Plante, G. Cameron, and A.
Tagnit-Hamou .

127 Application of Surface Wave Transmission Measurements for Crack Depth Determination in Concrete/
J. S. Popovics, W.-J. Song, M. Ghandehari, K. V. Subramaniam, J. D. Achinbach, and S. P. Shah

136 Mechanical Properties of High-Strength Concrete with Consideration for Precast Applications/
A. Mokhtarzadeh and C. French

148 Experimental Research on Corrosion of Reinforcement in Concrete through Cathode-to-Anode Area Ratio/
X. Song and X. Liu

156 Empirical Models to Predict Concrete Expansion Caused by Sulfate Attack/ K. E. Kurtis, P. J. M. Monteiro,
and S. M. Madanat

162 Microhardness Testing of Fiber-Reinforced Concrete Paste/ W. M. Cross, K. H. Sabnis, L. Kjerengtroen, and
J. J. Kellar

168 Measurement Techniques for Rapid Assessment of Carbonation in Concrete/ L. Krajci and l. Janotka

172 Conductive Concrete Overlay for Bridge Deck Deicing: Mixture Proportioning, Optimization, and
Properties/ S. Yehia, C. y: Tuan, D. Ferdon, and B. Chen

182 Post-Peak Behavior of Fiber-Reinforced Concrete under Cyclic Tensile Loads/ G. A. Plizzari, S. Cangiano,
and N. Cere

193 Prediction of Modulus of Rupture of Concrete/F. Légeron and P. Paultre

201 Bond Strength Development with Maturity of High-Early-Strength Bonded Concrete Overlays/ N. J. Delatte,
M. S. Williamson, and D. V. Fowler

208 "Glascrete" -Concrete with Glass Aggregate/W. Jin, C. Meyer, and S. Baxter

214 Bond Behavior of Corroded Reinforcement Bars/ Y. B. Auyeung, P. Balaguru, and L Chung
221 Evaluation of Rapid Chloride Permeability Test (RCPT) Results for Concrete Containing Mineral
Admixtures/ T. H. Wee, A. K. Suryavanshi, and S. S. Tin

JANUARY-FEBRUARY 2000 VOL. 97 NO. 1

3 Measurement of Flexural Toughness of Fiber- Reinforced Concrete Using a Novel Technique-Part 2:

Performance of Various Composites/ N. Banthia and A. Dubey

12 Effect of Mortar Fineness and Adhesive Agents on Pullout Response of Steel Fibers/ P. Guerrero and A. E.
Nooman

21 Influence of Mixture Proportions and Curing Conditions on Compressive Strength of High- Performance
Concrete/ K. Kovler, L. Schamban, S Igarashi, and A. Bentur

27 Behavior of High-Strength Concrete under Biaxial Stresses/A. Hussein and H. Morzouk

37 Thermal Acceleration of Portland Cement Concretes Using Direct Electronic Curing/

I. Heritage, F. M. Khalaf , and J. G. Wilson

41 High-Volume Fly Ash System: Concrete Solution for Sustainable Development/ A. Bilodeau and V.: M.
Malhotra

49 High-Strength Concrete in Uniaxial Tension /Q. Li and F. Ansari

58 High-Frequency Ultrasound Technique for Testing Concrete/ S. Popovics, N. M. Bilgutay, M. Karaoguz, and
T: Akgul

66 Strength Development of Concrete Incorporating High Levels of Ground Granulated Blast-Furnace Slag at
Low Temperatures/ T. Miura and I. Iwaki

71 Cracking Tendency and Drying Shrinkage of Silica Fume Concrete for Bridge Deck Applications/ D. A.
Whiting, R. J. Detwiler, and E. S. Lagergren

78 Microstructural Design of Concrete Reinforcing Bars for Improved Corrosion Performance/ D. Trejo, P. J.
M. Monteiro, B. C. Gerwick, Jr., and G. Thomas

84 New Water Permeability Test Scheme for Concrete /Z. Li and C.-K. Chau

NOVEMBER-DECEMBER 1999 VOL. 96 NO. 6

627 Theoretical Evaluationof Diffusion Coefficient of Chloride Ion in Mortar from Mobility/N. Otsuki,
M. Hisada, T. Otani, and T. Maruyama

634 Applications of Statistical Models for Proportioning Underwater Concrete / K. H. Khayat, A. Yahia, and
M. Sonebi.

641 Blended Fly Ash Cements-A Review/N. Bouzoubaâ, M.-H. Zhang, V. M. Malhotra, and D. M. Golden

651 Measurement of Flexural Toughness of Fiber- Reinforced Concrete Using a Novel Technique-Part 1:
Assessment and Calibration/N. Banthia and A. Dubey

657 Influence of Aggregate Surface Area on Mechanical Properties of Mortar/C. R Cable and M. D. Cohen

663 Fatigue Response of Concrete Subjected to Biaxial Stresses in the Compression- Tension Region
/K. V. Subramaniam, J. S. Popovics, and S. P. Shah

670 Statistical Approach to Ingress of Chloride Ions in Silica Fume Concrete for Bridge Decks/R. J. Detwiler;
D. A. Whiting, and E. S. Lagergren
676 Harmonized Test Procedures for Steel Fiber- Reinforced Concrete/P. Marti, T. Pfyl, V. Sigrist, and T. Ulaga

686 Application of Maturity Approach to Setting Times /R. C. A. Pinto and K. C. Hover

692 Bond Performance of Rapid-Setting Repair Materials Subjected to Deicing Salt and Freezing- Thawing
Cycles/S. Li, C. C. Frantz, and J. E. Stephens

698 Predicting Chloride Diffusion Coefficients from Concrete Mixture Proportions/J. Luciano and M.
Miltenberger

703 Studies on Hydration in High- Volume Fly Ash Concrete Binders/L. Jiang, B. Lin, and Y. Cai

SEPTEMBER-OCTOBER 1999 VOL. 96 NO. 5

519 Effect of Water Velocity on Performance of Underwater Self-Consolidating Concrete/M. Sonebi and K. H.
Khayat

529 Properties of Concrete Containing Ultimax Rapid-Setting Hydraulic Cement/A. A. Al-Manaseer, E. B.

Aquino, and H. Kumbargi

536 Measurement of Concrete Resistivity for Assessment of Corros ion Severity of Steel Using Wenner
Technique/ K. R. Gowers and S. G. Millard

542 Modeling of Shrinkage and Creep Stresses in Concrete Repair/ M. K. Rahman, M. H. Baluch, and A. H. Al-
Gadhib

551 Performance of Steel Reinforcement in Portland Cement and High-Volume Fly Ash Concretes Exposed to
Chloride Solution/P. Gu, J. J. Beaudoin, M.-H. Zhang, and V. M. Malhotra

559 Abrasion Resistance of Fine Aggregate-Replaced Silica Fume Concrete/N. Ghafoori and H. Diawara

568 Development of Statistical Quality Assurance Criterion for Concrete Using Ultrasonic Pulse Velocity
Method/ K. K. Phoon, T. H. Wee, and C. S. Loi

574 Systematic Study of Properties of Extrudates with Incorporated Metakaolin or Silica Fume/Z. Li, B. Mu, and
S. N.C. Chui

580 Finite Strain Tube-Squash Test of Concrete at High Pressures and Shear Angles up to 70 degrees/ Z. P.
Bazant, J. J. H. Kim, and M. Brocca

593 High-Early-Strength Concrete: Mixture Proportioning with Processed Cellulose Fibers for Durability/
P. Soroushian and S. Ravanbakhsh

600 Superplasticizer and Silica Fume Addition Effects on Heat of Hydration of Mortar Mixtures with Low
Water- Cementitious Materials Ratio/R. C. A. Pinto and K. C. Hover

605 Effects of Freeze- Thaw Exposure on Performance of Concrete Columns Strengthened with Advanced
Composites/H. A. Toutanji and P. Balaguru

JULY-AUGUST 1999 VOL. 96 NO. 4

419 Effect of Alkali-Silica Reaction on Tensile Bond Strength of Reinforcement in Concrete Tested under Static
and Fatigue Loading/T. Ahmed, E. Burle, and S. Rigden

429 Influence of Chloride Solution Concentration on Deicer Salt Scaling Deterioration of Concrete/J. Marchand,
M. Pigeon, D. Bager, and C. Talbot

436 Stress Relaxation Phenomena at Early Technological Phases of Gas-Concrete/V. A. Lapsa

440 Windsor Probe Test for Nondestructive Evaluation of Normal and High-Strength Concrete/A. A. Al-
Monaseer and E. B. Aquino

448 Water Permeability and Autogenous Healing of Cracks in Concrete/C. Edvardsen

455 Effect of Admixtures on Thermal and Thermomechanical Behavior of Cement Paste/X. Fu and D. D. L.
Chung

462 Specification of Concrete for Marine Environments: A Fresh Approach/D. Boweja, H: Roper, And V.
Sirvivatnanon

471 High-Performance Cement Grout for Post- Tensioning Applications/K. H. Khayat, A. Yahina, and P. Duffy

478 Crushed Bricks as Coarse Aggregate for Concrete/M. A. Mansur, T. H. Wee, and L. S. Cheran

485 Effect of Curing Condition on Strength and Elastic Modulus of Lightweight High-Strength Concrete/ A. R.
Khaloo and N.Kim

491 Study of High-Strength Concretes Reinforced with High. Strength Reinforcement: Study of Bonding Laws
and Cracking in Static System/S. Bernordí, B. Mesureur, and P. Rivillon

500 Behavior of Concrete Columns Confined with Fiber Reinforced Concrete Tubes/M. Saafi. H. Toutanji, and
Z. Li

MARCH-APRIL 1999 VOL. 96 NO. 2

143 Relaxation, Creep, and Fatigue Behavior of Carbon Fiber Reinforced Plastic Tendons/H. Saadatmanesh and
F. E. Tannous

154 Corrosion of Steel Bars with Respect to Orientation in Concrete/T. U. Mohammed, N. Otsuki, and M. Hisada

160 Evaluation of Repair and Maintenance Strategies for Concrete Coastal Bridges on Probabilistic Basis/S.
Engelund, J. Dalsgaard Sorensen, and B. Sorensen

167 Prediction of Cement Degree of Hydration Using Artificial Neural Networks/ A. A. Basma, S. A. Barakak,
and S. Al- Oraimi

173 Numerical Simulation of Reinforced Concrete Deterioration-Part I: Chloride Diffusion/E. J. Hansen and V.
E. Saouma

181 Concrete Incorporating Supplementary Cementing Materials: Effect on Compressive Strength and
Resistance to Chloride-Ion Penetration/ M.-H. Zhang, A. Bilodeau, V. M. Malhotra, K. -S. Kim, and J.-C.
Kim

190 Determining Crack Depth and Measurement Errors Using Time-of-Flight Diffraction Techniques/Y. Lin, T:
Liou, and W-H. Tsai

196 Micromechanical Modeling of Concrete Response under Static Loading- Part I: Model Development and
Validation/A. R. Mohamed and W Hansen

204 Influence of Dimension of Test Specimen on Alkali -Aggregate Reactive Expansion/C. Zhang, A. Wang, M.
Tang, and N. Zhang

208 Comparison between Diffusion Test and Electromechanical Acceleration Test for Leaching Degradation of
Cement Hydration Products/H. Saito and S. Nakane

213 True Fracture Energy of Concrete/R. K. Navalurkal; C.-T. T. Hsu, S. K. Kim, and M. Wecharatana

226 Fatigue Cracking of Polypropylene Fiber Reinforced Concrete/K. Tawfiq, J. Armaghani, and R. Ruiz

234 Effect of Shrinkage and Load-Induced Cracking on Water Permeability of Concrete/N. Hearn
242 Freeze- Thaw Bond Durability of Rapid-Setting Concrete Repair Materials/S. (E.) Li, D. G. Geissert, G. C.
Frantz, and J. E. Stephens

250 Lightweight Concrete with Bottom Ash-Radiological Aspects/M. Nisnevich, T: Schlesinger; Y: Eshel, and Y.
Grof

255 Propagation of Microcracks in Concrete Studied with Subregion Scanning Computer Vision (SSCV)/S. Choi
and S. P. Shah

261 Variation of In-Place Concrete Strength in Structures/ F. M. Bartlett and J. G. MacGregor

JANUARY-FEBRUARY 1999 VOL. 96 NO. 1

3 Determination of Fracture Energy and Process Zone Length Using Variable-Notch One-Size Specimens/
T. Tang, S. Yong, and D. G. Zollinger

11 Durability Assessment of Bridges with Full-Span Prestressed Concrete Form Panels / R. J. Peterman, J. A.
Romirez, and R. W. Poston

20 Development of Flexural Composite Properties and Dry Shrinkage Behavior of High-Performance Fiber
Reinforced Cementitious Composites at Early Ages / Y. M. Lim, H. -C. Wu, and V. C. Li

27 Compressive Stress-Strain Behavior of Normal and High- Strength Carbon-Fiber Concrete Reinforced with
Steel Spirals / G. Campione, S. Mindess, and G. Zingone

35 Modeling Concrete Shrinkage under Variable Ambient Conditions / J. M. Torrenti, L. Granger, M. Diruy,
and P. Genin

40 Characterization of Admixture as Plasticizer or Super- plasticizer by Deflocculation Test / A. Macias and S.

Goñi

47 Behavior of High-Performance Concrete under Ammonium Nitrate Solution and Sustained Load / U.
Schneider and S. -W. Chen

52 Mechanisms of Rupture in Splitting Tests / C. Rocco, G. V. Guinea, J. Planas, and M. Elices

61 Application of Neural Networks for Proportioning of Concrete Mixes / J. -W. Oh, I. -W. Lee, J. –T. Kim, and
G. -W. Lee

68 Effect of Ground Copper Slag on Strength and Toughness of Cementitious Mixes / A. M. Ariño and B.
Mobasher

74 Combined Effects of Silica Fume, Aggregate Type, and Size on Postpeak Response of Concrete in Bending /
C. Tasdemir, M. A. Tasdemir, N. Mills, B. -I. G. Barr, and F. D. Lydon

84 Modification of Pore Chemicals in Evaluation of High- Performance Concrete Permeability / T. -J. Zhao, J. -
Q. Zhu, and P. -Y. Chi

90 Underwater Adhesion of Polymethyl Methacrylate Concretes to Reinforcing Steel (Reinforcing Bars) / M. A.

R. Bhutta,Y. Ohama, and K. Demura

95 Extension towards Early Age Concrete of CEB-FIP Model Code 1990 Stress-Strain Relation for Short- Term
Compressive Loading / G. De Schutter

101 Laboratory Evaluation of Nuclear Gage for Measurement of Water and Cement Content of Fresh Concrete /
D. Whiting and M. Nagi

109 Effects of Pollution from Kuwait Oil Well Fires on Concrete Properties / H. Al-Khaiat
116 Behavior of Reinforced Concrete Walls with Internal Plaster Coating under Exterior Hard Projectile Impact /
A. N. Doncygier, D. Z. Yankelevsky, and H. Baum

NOVEMBER-DECEMBER 1998 VOL. 95 NO. 6

655 Ductile Hybrid Fiber Reinforced Plastic Reinforcing Bar for Concrete Structures: Design Methodology / W.
Somboonsong, F. K. Ko, and H. G. Harris

667 Tensile Behavior of Fiber-Cement Hybrid Composites Containing Polyvinyl Alcohol Fiber Yarns / G. Xu,S.
Magnani, and D. J. Hannant

675 Modeling the Time-to-Corrosion Cracking in Chloride Contaminated Reinforced Concrete Structures / y: Liu
and R. E. Weyers

682 Damage Model for Reinforced Concrete Elements under Cyclic Loading / P. S. Rao, B. S. Sarma, N.
Lakshmanan, and F. Stangenberg

691 Measurement of Permeability under Uniaxial Compression-A Test Method / N. Hearn and G. Lok
Pumpability of Non-Sand Concrete with Anti- Segregative Additives / F. E. Amparano and Y. Xi

704 Nondestructive Measurement of Corrosion State of Reinforcing Steel in Concrete / P. J. M. Monteiro, F.

Morrison, and W. Frangos

710 Effect of Bentonite and Zeolite on Durability of Cement Suspension under Sulfate Attack / I. Janotka and L.
Stevula

716 Effect of Slag on Expansion Due to Alkali-Aggregate Reaction in Concrete / M. D. A. Thomas and F. A.
Innis

725 Effects of Water-Cement Ratio, Curing Age, Silica Fume, Polymer Admixtures, Steel Surface Treatments,
and Corrosion on Bond between Concrete and Steel Reinforcing Bars / X. Fu and D. D. L. Chung

735 Review of Strain Rate Effects for Concrete in Tension /L. J. Malvar and C. A. Ross

740 Proportioning Spent Casting Sand in Controlled Low- Strength Materials / P. J. Tikalsky, E. Smith, and R.
W. Regan

747 High-Strength Concrete Subjected to Triaxial Compression/ F. Ansari and Q. Li

SEPTEMBER-OCTOBER 1998 VOL. 95 NO. 5

499 Bond Stength of Reinforcement in High-Performance Concrete: The Role of Silica Fume, Casting Position,
and Superplasticizer Dosage / B. S. Hamad and M. S. Itani

512 Effect of Strain Rate on the Compressive Strength Surface Cracking and Failure Mode of Mortar / L.
Zhaoxia and H. Yaoping

519 Stress Effect on the Ultrasonic Velocity Variations of Concrete under Repeated Loading / T. T. Wu and T. F.
Lin

525 Measurement and Prediction of Pore Pressures in Saturated Cement Mortar Subjected to Radiant Heating /
G. R. Consolazio, M. C. McVay, and J. W. Rish III

537 Pozzolanic Reaction and Microstructure of Chemical Activated Lime-Fly Ash Pastes / C. Shi

546 Estimating Service Life of Epoxy-Coated Reinforcing Steel /R. E. Weyers, W. Pyc, and M. M. Sprinkel
558 Role of Chemical and Mineral Admixtures on Physical Properties and Frost-Resistance of Recycled
Aggregate Concrete /R. M. Salem and E. C. Burdette

564 Uniaxial Tensile Behavior of Concrete Reinforced with Randomly Distributed Short Fibers / Z. Li. F. Li, T.-
Y: P. Chang, and Y.- W. Mai
575 Fatigue of Concrete under Uniaxial Compression Cyclic Loading / L. Gao and C.-T. T. Hsu

582 Compacted Non-Cement Concrete Utilizing Fluidized Bed and Pulverized Goal Combustion By-Products /
N. Ghafoori and C. A. G. Mora
593 History of Mathematical Model for Strength Development of Portland Cement Concrete / S. Popovics

601 Improving the Bond Strength of Concrete to Reinforcement by Adding Methylcellulose to Concrete / X. Fu
and D. D. L. Chung

609 Review of Static and Dynamic Properties of Steel Reinforcing Bars / L. J. Malvar
617 Analysis ofCompressive Stress-Induced Cracks in Concrete /K. M. Nemati, P. J. M. Monteiro, and K. L.
Scrivener
631 Engineering Material Properties of a Fiber-Reinforced Cellular Concrete / R. F. Zollo and C. D. Hays

636 Sustained Load Strength and Short- Term Strain Behavior of High-Strength Concrete / S. Iravani and J. G.
MacGregor

JULY-AUGUST 1998 VOL. 95 NO. 4

331 Size Effect and Influence of Aggregate Roughness in Interface Fracture of Concrete Composites/
Uwe Trende and Oral Büyükozürk

339 A Method to Predict Shrinkage Cracking of Concrete/ Surendra P. Shah, Chengsheng Ouyang, Shashidhara
Marikunte, Wei Yong, and Emilie Becq-Giraudon

347 Sulfate Resistance of Roller Compacted Concrete/Nader Ghafoori and Zhiwang Zhang

356 Development of Tire Added Latex Concrete/Hee Suk Lee, Hosin Lee, Jang Soo Moon, and Hwan Wook Jung

365 Plastic Shrinkage Cracking and Evaporation Formulas/Paul J. Uno

376 The State and Fatigue Strength of Reinforced Concrete Beams Affected by Alkali-Silica Reaction /
Tarig Ahmed, Eldon Burley, and Stephen Rigden

389 Effect of Supplementary Cementing Materials on the Specific Conductivity of Pore Solution and its
Implications on the Rapid Chloride Permeability Test (AASHTO T277 and ASTM C1202) Results/Caijun
Shi, Julia A. Stegemann, and Robert J. Caldwell

395 Effects of High Temperature on the Residual Compressive Strength of High-Strength Siliceous
Concretes/Roberto Felicetti and Pietro G. Gambarova

407 Influences of Reinforcing Bars on Crack Depth Measurement by Stress Waves/Yiching Lin, Tzonghow Liou,
and Chiamen Hsia

419 Stress-Strain Characteristics of Confined Concrete in Column "Hinges" /Andrew Griezic, William D. Cook,
and Denis Mitchell

429 Control Of Plastic Shrinkage Cracking with Specialty Cellulose Fibers/Parviz Soroushian and Siavosh
Ravanbakhsh

436 Laboratory Test Procedures for Evaluating Concrete Treated with Sealers/Thomas D. Bush, Jr.

445 Service Life Model for Concrete Structures in Chloride Laden Environments/Richard E. Weyers

454 Mechanical Properties and Durability of Concrete Made with Blended Fly Ash/Tarun R. Naik, Shiw S. Singh,
and Bruce W. Ramme

463 Experimental Research on Polymer Modified Concrete/ Radomir J. Folic and Vlastimir S. Radanjanin
470 Concrete Masonry Unit Mix Designs Using Municipal Solid Waste Bottom Ash/Eric R. Berg and John A.
Neal

480 Length Expansion and Cracking of Plain and Reinforced Concrete Prisms Due to Alkali-Silica Reaction/
Shenfu Fan and John M. Hansan

MAY-JUNE 1998 VOL. 95 NO. 3

207 Cloride-Induced Steel Corrosion in Concrete: Part I-Corrosion Rates, Corrosion Activity, and Attack
Areas/Daksh Baweja, Harold Roper; and Vute Sirivivatnanon

218 A Reliability Approach to Landing Pier Optimum Repair Level/Manabu Matsushima, Hiroshi Seki, and
Kunihito Matsui

226 Investigation of Corrosion Damage in a Reinforced Concrete Structure in Kuwait/Suad AI-Bahat; Emmanuel
K. Attiogbe, and Hasan Kamal

232 The Effect of Material Degradation on Bond Properties of Fiber Reinforced Plastic Reinforcing Bars in
Concrete/Lawrence C. Bank, Moshe Puterman, and Amnon Katz

244 Laboratory-Made Roller Compacted Concretes Containing Dry Bottom Ash: Part II-Long- Term Durability/
Nader Ghafoori and Yuzheng Cai

252 High Performance Concrete: Influence of Coarse Aggregates on Mechanical Properties/Aykut Cetin and
Ramon L. Carrasquillo

262 Electromagnetic Properties of Concrete at Microwave Frequency Range/Hong C. Rhim and Oral
Büyüköztürk

272 Punching Shear Strength of Continuous Post- Tensioned Concrete Flat Plates/N. J. Gardner and Mahmoud
Rezai Kallage

284 Influence of High-Reactivity Metakaolin and Silica Fume on the Flexural Toughness of High- Performance
Steel Fiber-Reinforced Concrete/ Ashish Dubey and Nemkumar Banthia

293 Thermal Properties and Transient Thermal Analysis of Structural Members during Hydration/Arshad A.
Khan, William D. Cook, and Denis Mitchell

304 Mode I Fracture Strength Based on Pullout Force and Equivalent Age/Ronald L. Dilly and Dan G. Zollinger

MARCH-APRIL 1998 VOL. 95 NO. 2

87 Environmental Effects on the Mechanical Properties of E-Glass FRP Rebars/FaresE. Tannous and Hamid
Saadatmanesh

101 Protective Ability of an Acrylic-Based Surface Coating System against Chloride and Carbonation
Penetration into Concrete/R. Narayan Swamy, Arvind K. Suryavanshi, and Shin Tanikawa

113 Modeling of Chloride Diffusion in Concrete and Determination of Diffusion Coefficients/ Nagesh M. and
Bishwajit Bhattacharjee

121 Laboratory-Made Roller Compacted Concretes Containing Dry Bottom Ash: Part I-Mechanical Properties/
Nader Ghafoori and Yuzheng Cai

131 Development of Strength and Fracture Properties of Styrene-Butadiene Copolymer Latex-Modified

Concrete/ Suvimol Sujjavanich and James R. Lundy

144 Triaxial Behavior of High-Strength Concrete and Mortar/Claus Vestergaard Nielsen

152 The Effects of Polysaccharide Gum Additives on the Shotcrete Process/ Virgilio A. Ghio and Paulo J. M.
Monteiro

158 Use of Viscosity-Modifying Admixture to Reduce Top- Bar Effect of Anchored Bars Cast with Fluid
Concrete/ K. H. Khayat

168 Determining the Depth of Surfact-Opening Cracks Using Impact-Generated Stress Waves and Time-of-
Flight Techniques/Mary Sansalone, Jiunn-Ming Lin, and William B. Streett

178 Stress-Strain Behavior of Concrete under Cyclic Loading/Byong Youl Bahn and Cheng-Tzu Thomas Hsu

JANUARY-FEBRUARY 1998 VOL. 95 NO. 1

3 Alkali-Silica Reaction-Part 2: The Effect of Chemical Admixtures/Monica Prezzi, Paulo J. M. Monteiro, and
Garrison Sposito

11 Impact Resistance of Concrete Plates Reinforced with a Fiber Reinforced Plastic Grid/ N. Banthia, C. Yan,
and K. Sakai

19 Drying Shrinkage of Roller-Compacted Concrete for Pavement/David W: Pittman and Steven A. Ragan

27 Ultrasonic Investigation of Concrete with Distributed Damage/Scott R Selleck, Eric N. Landis, Michael L.
Peterson, Surendra P. Shah, and Jan D. Achenbach

37 Fundamental Study on Hydration of Cement and Cement Minerals with Steam/Wei-Ming Lin, T. D. Lin, C.
L. Hwang, and K N. Peng

50 Nondestructive Determination of the Dynamic Modulus of Concrete Disks/Michael L. Leming, James M.

Nau, and Jason Fukuda

58 Fatigue Performance in Flexure of Fiber Reinforced Concrete/Zhang Jun and Henrik Stang

68 Application of Acoustic Emission Technique to Detection of Reinforcing Steel Corrosion in Concrete/

Zongjin Li, Faming Li, Allan Zdunek, Eric Landis, and Surendra P. Shah

NOVEMBER-DECEMBER 1997 VOL. 94 NO. 6

457 Mechanical Properties of Concrete in Uniaxial Compression/ Y.-H. Lee and K. Willam

472 Sensitivity of Compressive Strength of HSC to Hot-Dry Climate, Curing Regimes, and Additives/Saleh H.
Alsayed

478 High Performance Multimodal Fiber Reinforced Cement Composites (HPMFRCC): The LCPC Experience/
P. Rossi

484 Bifurcation in Compressive Behavior of Concrete/Kiyohiro Ikeda, Kyuichi Maruyama, Hitoshi Ishida, and
Shigemi Kagawa

491 In Situ Mechanical Properties of Wall Elements Cast Using Self-Consolidating Concrete/ K. H. Khayat, K.
Manai, and A. Trudel

501 Concreting Workmanship and Its Influence on Serviceability Reliability/ Mark G. Stewart

510 Acoustic Emission Monitoring as a Nondestructive Testing Technique in Reinforced Concrete/ Stephen W.
Hearn and Carol K. Shield

520 Concrete Strength Estimation at Early Ages: Modification of the Method of Equivalent Age/ Gilles
Chanvillard and Laetitia D'Aloia
531 A Procedure for Determining P-Wave Speed in Concrete for Use in Impact-Echo Testing Using a P-Wave
Speed Measurement Technique/ Mary Sansalone, Jiunn-Ming Lin, and William B. Streett

540 Temperature Dependence of Compressive Strength of Conversion-Inhibited High Alumina Cement

Concrete/ Yan Fu, Jian Ding, and James J. Beaudoin

546 Concrete Attack by Feed Acids: Accelerated Tests to Compare Different Concrete Compositions and
Technologies/ Nele De Belie, Marcel Debruyckere, Dirk Van Nieuwenburg, and Benny De Blaere

555 Mechanical Properties of PVA Fiber Reinforced Cement Composites Fabricated by Extrusion Processing/
Yixin Shoo and Surendra P. Shah

565 A Prediction Method for Long- Term Chloride Concentration Profiles in Hardened Cement Matrix
Materials/ T. H. Wee, S. F. Wong, S. Swoddiwudhipong, and S. L. Lee

577 Modeling the Thermal Stresses at Early Ages in a Concrete Monolith/Eric Ayotte, Bruno Mossicotte, Jules
Houde, and Vladimir Gocevski

588 Volume Fraction of Protected Paste and Mean Spacing of Air Voids/ Emmanuel K. Attiogbe

592 Influence of Concrete and Fiber Characteristics on Behavior of Steel Fiber Reinforced Concrete under Direct
Shear/ Ali R. Khaloo and Nakseok Kim

602 Carbonation of Some Coastal Concrete Structures in Kuwait/ H. Al-Khaiat and M. N. Haque

SEPTEMBER-OCTOBER 1997 VOL. 94 NO. 5

341 Can Steel Fibers Replace Transverse Reinforcements in Reinforced Concrete Beams?/Pascal Casanova,
Pierre Rossi, and Isabelle Schaller

355 Influence of Fly Ash on Setting and Hardening Characteristics of Concrete Systems/Tarun R. Naik and Shiw
S. Singh

361 Statistics of High-Strength Concrete Cylinders/ Sami W. Tabsh and Alex Aswad

365 Effect of Welan Gum-High-Range Water Reducer Combinations on Rheology of Cement Grout/K. H.
Khayatand A. Yahia

373 Micromechanical Tensile Behavior of Slurry Infiltrated Continuous-Fiber-Mat Reinforced Concrete

(SIMCON)/Neven Krstulovic-Opara and Sary Malak

385 A Study of Corrosion Inhibitor Performance in Chloride Contaminated Concrete by Electrochemical

Impedance Spectroscopy/Ping Gu, S. Elliott, R. Hristova, J. J. Beaudoin, R. Brousseau, and B. Baldock

396 Detection of Sub-Surface Anomalies in Concrete Bridge Decks using Ground Penetrating Radar/ Udaya B.
Halabe, Hung-Liang( Roger) Chen, Vasudev Bhandarkat; and Zahid Sami

409 Concrete and Sustainable Development/ Vesa Penttala

417 The Influence of Aggregate on the Compressive Strength of Normal and High-Strength Concrete/ Francois
de Larrard and Albert Belloc

427 Experimental Investigation of Multiaxial Compressive Strength of Concrete under Different Stress Paths/
Shengrui Lan and Zhenhai Guo

435 Packing of Aggregates: An Alternative Tool to Determine the Optimal Aggregate Mix/ Per Goltermann,
Vagn Johansen, and Lars Palbol
JULY-AUGUST 1997 VOL. 94 NO. 4

267 Study on Allowable Coating Damage of Epoxy-Coated Reinforcing Bars/Takashi Miura, Hirofusa Itabashi,
and Ichiro Iwaki

273 Low-Cycle Fatigue of Plain and Fiber-Reinforced Concrete/ Todorkà Paskova and Christian Meyer

286 Mechanical Properties and Durability of Two Industrial Reactive Powder Concretes/ Oliver Bonneau,
Mohamed Lachemi, Éric Dallaire Jérome Dugat, and Pierri-Claude Aïtcin

291 Cement Grout Containing Precipitated Silica and Superplasticizers for Post-Tensioning/ Josée Bastien,
Jérome Dugat, and Evelyn Prat

296 Assessing Quality of Concrete with Wave Propagation Techniques/Soheil Nazarian, Mark Baket; and Kevin
Crain

306 Proprietary and Carbon Fiber Modified Overlays in the Cathodic Protection of Reinforced Concrete/ Rejean
J. Brousseau and Glendon B. Pye

311 Experimental Service Life Prediction of Rebar- Corroded Reinforced Concrete Structure/ Shamsad Ahmad,
Bishwajit Bhattacha1jee, and Rajeev Wason

317 Effect of Fibers on Development/Splice Strength of Reinforcing Bars in Tension/ M. H. Harajli and K. A.
Sallaukh

325 A Comparison of Freezing and Thawing Durability of Non-Air Entrained Concrete Pavers under ASTM C
67 and ASTM C 666/ Nader Ghafoori and Richard Mathis

332 Use of Viscosity-Modifying Admixture to Enhance Stability of Fluid Concrete/ Kamal Henri Khayat and
Zubeir Guizani

MAY-JUNE 1997 VOL. 94 NO. 3

183 Use of Blended Silica Fume Cement in Commercial Concrete Mixtures/by Kamal H. Khayat, M. Vachon,
M.-C. Lanctôt

193 Influence of Field Variables on Laboratory Performance of Silane-Treated Concrete/ by Thomas D. Bush,
Jr., Amr A. Kamel, Phani A. Kalluri

203 Bond Strength and Contact Electrical Resistivity between Cement and Stainless Steel Fiber: Their
Correlation and Dependence on Fiber Surface Treatment and Curing Age/by Xuli Fu, D. D. L. Chung

209 Effects of Shape, Size, and Casting Direction of Specimens on Stress-Strain Curves of High-Strength
Concrete/by M.S. Chin, M.A. Mansur; T: H. Wee

220 Effect of Different Zeolites on Conversion-Prevention in High-Alumina Cement Products/by Jian Ding, Yan
Fu, J. J. Beaudoin

227 Determination of the Effect Chloride Diffusion Coefficient in Concrete via a Gas Diffusion Technique/by
Alfarabi Sharif, K. F. Loughlin, A. K. Azad, C. M. Navaz

234 A New Rheometer for Soft-to-Fluid Fresh Concrete/ by F. de Larrard, C. Hu, T: Sedran, J. C. Szitkar; M.
Joly, F. Claux, F. Derkx

244 Use of Composite Testing for Evaluation of Keyway Grout for Precast Prestressed Bridge Beams/ by Robert
J. Gulyas, Jeffery T: Champa

251 Use of Reclaimed Asphalt Pavement as an Aggregate in Portland Cement Concrete/by Murshed Delwar;
Mostafa Fahmy, Ramzi Taha

257 Methods for the Determination of Water Permeability of Concrete/ by R. P. Khatri, V Sirivivatnanon
MARCH-APRIL 1997 VOL. 94 NO. 2

83 Effect of Confinement on Siliceous Aggregate Concrete Subjected to Elevated Temperature and Cyclic
Heating/ Mohamad J. Terro and Samir A. Hamoush

90 Properties of High-Calcium Dry Bottom Ash Concrete/ Nader Ghafoori and Jeffrey Bucholc

102 Influence of Ambient and Fresh Concrete Temperatures on the Maximum Temperature and Thermal
Gradient in a High-Performance Concrete Structure/ Mohamed Lachemi and Pierre-Claude Aitcin

111 Bond Strength of Reinforcing Bars in Reinforced Shotcrete/ Virgilio A. Ghio and Paulo J. M. Monteiro

119 Thermal Effects During the Curing of Concrete Pavements/D. Kapila, J. F alkowsky, and J. L. Plawsky

129 Heat Cycling of Epoxy Mortar Repaired Beams/A. I. Abu- Tait; E. Bur/cy, and S. R. Rigden

134 Effect of Crack Control in Mortars Containing Polypropylene Fibers on the Corrosion of Steel in a
Cementitious Matrix/ M. A. Sanjuan, C. Andrade, and A. Bentur

142 Effect of Gypsum-Hemihydrate Ratio in Cement on Rheological Properties of Fresh Concrete/Jon Havard
and Odd E. Gjoerv

147 Microstructural and Mechanical Effects of Latex, Methylcellulose, and Silica Fume on Carbon Fiber
Reinforced Cement/ Pu- Woei Chen, Xu/i Fu, and D. D. L. Chung

156 Creep, Shrinkage, and Thermal Strains in Normal, Medium, and High-Strength Concretes during
Hydration/Arshad A. Khan, William D. Cook, and Denis Mitchell

164 Deicer Salt Scaling Resistance of Roller-Compacted Concrete Pavements/ A. Delagrave, J. Marchand, M.
Pigeon, and J. Boisve11

JANUARY-FEBRUARY 1997 VOL. 94 NO. 1

3 Truck and Central Mixing Mechanisms in Saudi Arabia/A Arafah, M. Abu-Zaid, and G. H. Siddiqi

10 Alkali-Silica Reaction, Part I/ M. Prezzi, P. J. M. Monteiro, and G. Sposito

18 Predicting the Flexural Postcracking . Performance of Steel Fiber Reinforced Concrete from the Pullout of
Single Fibers/H. S. Armelin and N. Banthia

32 Scaling Resistance of Concrete Paving Block Surface Exposed to Deicing Chemicals/ N. Ghafoori and R. P.
Mathis

39 Tensile Behavior of Slurry Infiltrated Mat Concrete (SIMCON)/N. Krstu/ovic-Opara and S. Ma/ak

47 Freeze-Thaw and Freeze-Deicing Salt Resistance of Concretes Containing Cement Rich in .Granulated Blast
Furnace Slag/J. Stark and H.-M. Ludwig

56 Laboratory Studies and Calculations on the Influence of Crack Width on Chloride- Induced Corrosion of
Steel in Concrete/ P. Schiessl and M. Raupach

63 Soil Physics Principles Validated for Use in Predicting Unsaturated Moisture Movement in Portland Cement
Concrete/ B. M. Savage and D. J. Janssen

71 Aggregate Bond and Modulus of Elasticity of Concrete/A. M. Neville

NOVEMBER-DECEMBER 1996 VOL. 93 NO. 6

519 Damage in High-Strength Concrete Due to Monotonic and Cyclic Compression: A Study Based on the
Splitting- Tensile Strength/R. Gettu, A. Aguado, and M. O. Oliveira

524 Acceptable Shock and Vibration Limits for Freshly Placed and Maturing Concrete/A. H. Hulshizer

534 Chloride Threshold for Corrosion of Reinforcement in Concrete/ S. E. Hussain, A. S. Al-Gahtani, and
Rasheeduzzafar

539 Autogenous Deformation and Change of the Relative Humidity in Silica Fume Modified Cement Paste/
O. M. Jensen and P. F. Hansen

544 Reliability Approach to Service Life Prediction of Concrete Exposed to Marine Environments/
M. Prezzi, P. Geyskens, and P. 1. M. Monteiro

553 Testing the Bond between Repair Materials and Concrete Substrate/ A. L. Abu- Tair; S. R. Rigden, and
E. Burley

559 Comparison between Slag and Silica Fume Modified Grouts/M. L. Allan and L. E. Kukacka

569 Aggregates and the Deformation Properties of Concrete/M. G. Alexander

578 Characteristics of Deformed Reinforcing Steel Bars Embeddedin SIFCON/ A. M. Hamza and A. E.Naaman

589 Experimental Study of Plain Concrete under Triaxial Stress/I. Imran and S. J. Pantazopoulou

602 Service Life Prediction of Existing Concrete Structures Exposed to Marine Environment/ M. Maage, S.
Helland, E. Poulsen, O. Vennesland, and J. E. Carlsen

609 Corrosion Protection of Reinforcement in Modified High Alumina Cement Concrete/ Y Fu, J. Ding, and J. J.
Beaudoin

613 Hydraulic Activity of Slags Obtained by Vitrification of Waste/ J. Pera, A. Wolde, and M. Chabannet

619 Interaction between Accelerating Admixtures and Portland Cement for Shotcrete/ L. R. Prudencio, Jr:, H. S.
Armelin, and P. Helene

629 High-Performance Concrete Incorporating Rice Husk Ash as a Supplementary Cementing Material/ M.-H.
Zhang and V.M. Malhotra

SEPTEMBER-OCTOBER 1996 VOL. 93 NO. 5

403 Estimation of Early-Age Thermal Cracking Tendency of Massive Concrete Elements By Means of
Equivalent Thickness / G. De Schutter and L. Taerwe

409 Shrinkage Cracking of High-Strength Concrete/ K. Wiegrink, S. Morikunte, and S. P. Shah

416 Mechanical Properties of High-Performance Concrete/S. Iravani

427 Workability Loss of High-Strength Concrete/J. Punkki, J. Golaszewski, and O. E. Gjorv.

432 Stress-Strain Relationship of Confined and Unconfined Concrete/M. M. Attard and S. Setunge

443 Effect of Stress on Gas Permeability in Concrete, by Takafumi Sugiyama/ T. W. Bremner; and T. A. Holm

451 Effect of Prolonged Mixing on Compressive Strength of Concrete with and without Fly Ash and/
or Chemical Admixtures /D. Ravina

457 Predicting Freeze- Thaw Durability of Concrete-A New Approach/ E. K. Attiogbe

465 Influence of Microstructure on the Physical Properties of Self-Curing Concrete/ R. K. Dhir; P. C. Hewlett,
and T D. Dyer

472 Impact Resistance of Steel Fiber Reinforced Concrete/N. Bonthio, S. Mindess, and J.-F. Trorrier

480 Interfacial (Fiber-Matrix) Properties of High- Strength Mortar (150 MPa) from Fiber Pullout/ M. J.
Shannag, R. Brincker; and W. Hansen

487 Tensile Strength of Low, Medium, and High- Strength Concretes at Early Ages/ A. A. Khan, W. D. Cook,
and D. Mitchell

494 Use of Stress Waves for Determining the Depth of Surface-Opening Cracks in Concrete Structures/Y. Lin
and W. C. Su

JULY-AUGUST 1996 VOL. 93 NO. 4

307 Impact of Environmental and Operating Conditions in Oil Refineries on Concrete Properties/O. E. K. Daoud
and I. A. lbrahim

318 Impact-Echo Studies of Interfacial Bond Quality in Concrete: Part II-Effects of Bond Tensile Strength/ J.-M.
Lin, M. Sansalone, and R. Poston

327 Mechanisms of Delayed Ettringite Formation in Portland Cement Systems/ Y. Fu and J. J. Beoudoin

334 Why Sealed Concrete Swells/ K. Kovler

341 Carbon Fiber Reinforced Concrete as an Intrinsically Smart Concrete for Damage Assessment during Static
and Dynamic Loading/ P.-W. Chen and D. D. L. Chung

351 Dispersing Action of a Superplasticizer with Different Grades of Cements and Fly Ash/ R. N. Krishna

356 Physico-Mechanical Properties and Load Transfer Efficiency of RCC Pavement/ A. Nanni, D. A. Ludwig,
and J. E. Shoenberger

362 Bond Strength of Black and Epoxy-Coated Reinforcement-A Theoretical Approach/ J. Cairns and R. B.
Abdullah

370 Microscopic Study of Ice Propagation in Concrete/ K. Wang, P. J. M. Monteiro, B. Rubinsky, and A. Arav

378 Damage Process in Hardened Cement Pastel C. Xuanhui and L. Yongqi

386 Freeze- Thaw Durability of High-Performance Concrete Masonry Units/J. D. Bowser; G. L. Krause, and M.
K. Tadros

MAY-JUNE 1996 VOL. 93 NO. 3

199 Microstructures of Fire-Damaged Concrete/ W. M. Lin, T. D. Lin, and L. J. Powers-Couche

206 Study of the Fatigue Performance and Damage Mechanism of Steel Fiber Reinforced Concrete/ S. Wei, G.
Jianming, and Y. Yun

213 Prediction of Shear Strength of Reinforced Concrete Beams Without Web Reinforcement/ J. K. Kim and Y.
D. Park

223 Impact-Echo Studies of Interfacial Bond Quality in Concrete: Part I-Effects of Unbonded Fraction of Area/
J. M. Lin and M. Sansalone

233 High-Performance Concrete: Requirements for Constituent Materials and Mix Proportioning/
P. A. Gutiérrez and M. F. Cánovas
242 Freeze- Thaw Durability of Activated Blast Furnace Slag Cement Concrete/ P. M. Gifford and J. E. Gillot

246 Bond Strength and Load Distribution of Composite GFRP Reinforcing Bars in Concrete/ B. Benmokrane, B.
Tighiouart, and O. Chaallal/

254 Stresses in Early-Age Concrete: Comparison of Different Creep Models/ I. Guénot, J. M. Torrenti, and P.
Laplante

260 Nondestructive Evaluation of Early-Age Concrete Strength in Plate Structures by the Impact-Echo Method/
S. Pessiki and M.R. Johnson

272 Fracture of Concrete under Variable Amplitude Fatigue Loading/V. Slowik, G. A. Plizzari; and V. E. Saouma

284 Mechanical Properties of Hybrid Cement-Based Composites/B. Mobasher and C. Y. Li

293 Moisture and Strain Rate Effects on Concrete Strength/ C. A. Ross, D. M. Jerome, J. W. Tedesco, and M. L.
Hughes

MARCH-APRIL 1996 VOL. 93 NO. 2

111 Effect of Superplasticizer Dosage on Mechanical Properties, Permeability, and Freeze- Thaw Durability of
High Strength Concrete With and Without Silica Fume/ R. Gagné, A. Boisvert, and M. Pigeon

121 Effect of Epoxy-Coated Reinforcement and Concrete Quality on Cracking of Flat Plate Slab- Column
Connections/ H. H. Abrishami, W. D. Cook, and D. Mitchell

129 Comparative Study of Concretes Reinforced with Carbon, Polyethylene, and Steel Fiber and Their
Improvement by Latex Addition/ P.-W. Chen and D. D. L. Chung

134 Effects of Anti-Washout Admixtures on Properties of Hardened Concrete/K. H. Khayat

147 Simple Method for Determining Material Fracture-Parameters-from Peak Loads/ T. Tang, C. Ouyang, and S.
P. Shah

158 Statistical Analysis of the Compressive Strength of Concrete in Structures/ F. M. Bartlett and J. G.
MacGregor

169 Concrete Creep and Shrinkage Prediction from Short- Term Tests/ R. P. Odrovic and M. S. Zarghomee

178 Effect of Latex on the Mechanical Properties/ K. Zayat and Z. Bayasi

182 Strength of Recycled Aggregate Concrete Made Using Field-Demolished Concrete as Aggregate/ M.
Tavakoli and P. Soroushian

JANUARY-FEBRUARY 1996 VOL. 93 NO. 1

3 Estimation of Coarse Aggregate Strength in High-Strength Concrete/ T.-P. Chang and N.-K. Su

10 Evaluation of the Bond-Splitting Action of Ribbed Bars/ J. Cairns and K. Jones

20 Experimental Study on the Fluidity of Anti- washout Concrete/ N. Otsuki, M. Hisada, S. Nagatoki, and T.
Kamada

26 Engineering Properties of Epoxy Resins Used as Concrete Adhesives/ L. Tu and D. Kruger

36 Plastic Shrinkage Cracking of Normal and High- Strength Concrete: A Comparative Study/
T. A. Samman, W. H. Mirza, and R R Wafa

41 Application of Foundry By-Product Materials in Manufacture of Concrete and Masonry Products/ T. R. Naik,
S. W. Singh, M. P. Tharaniyil, and R. B. Wendorf
51 Effects of High- Temperature and Pressure on Strength and Elasticity of Lignite Fly Ash and Silica Fume
Concrete/ S. Ghosh and K. W. Nasser

61 Effect of Steel Fibers and Epoxy-Coated Reinforcement on Tension Stiffening and Cracking of Reinforced
Concrete/ D. Mitchell, H. H. Abrishami, and S. Mindess

69 Use of Air-Entraining Admixtures in Dry-Mix Shotcrete/ A. Lomontagne, M. Pigeon, R. Pleau, and D.

Beaupre

75 Nondestructive Testing of Concrete Structures Using the Rayleigh Wave Dispersion Method/
N. Krstulovic-Opara, R. D. Woods, and N. Al-Shayea

87 Effects of Curing Conditions and Age on Chloride Permeability of Fly Ash Mortar/ A. Alzohaimy, P.
Soroushian, and F Mirza

96 Investigations on Determining Thermal Stress in Massive Concrete Structures/ T. Kawaguchi and S. Nakane

NOVEMBER-DECEMBER 1995 VOL. 92 NO. 6

579 Bond of Coated and Uncoated Bars/ Hamad

591 Silica Fume and Steel Corrosion/Gjorv

599 Measurement of Air- Void Structure/ Aarre

605 Mechanical Response of Plain Concrete/ Pantazopoulou and Mills

617 Early Age Compressive Stress-Strain Properties/ Khan, Cook, and Mitchell

625 Frost Durability of Concrete with Viscosity- Modifying Admixtures/ Khayat

634 Fracture Toughness of Mortar- Aggregate Interface in High-Strength Concrete/ Lee and Büyüköztürk

643 Neoprene Capping for Modulus of Elasticity Tests/Crouch and Pearson

649 Abrasion Resistance of Fly Ash Concrete/Naik, Singh, and Hussain

660 Nondestructive Evaluation of Polymer Concrete/Mantrala and Vipulonandan

669 Steel-Fiber Concretes for Bridge Deck Overlays/ Krstulovic-Opara, Hoghoyeghi, Haidar; Krauss

678 Cracking in Pavement Reinforced with Epoxy-Coated Steel/ Zwerneman, Donahey, Syed, and Gunna

669 Crack Evaluation with Ultrasonic Spectroscopy/ Sakata and Ohtsu

SEPTEMBER-OCTOBER 1995 VOL. 92 NO. 5

483 Size Effect on Fracture Energy and Stability Issues in 3-Point Bending Fracture Toughness Testing/
Perdikaris and Romeo

497 Effects of Withholding Mixing Water and Retempering on Concrete Properties/ Anderson and Carrasquillo

507 Vacuum Concrete with Improved Imperviousness Against Organic Fluids/ Reinhardt and Frey

511 Condition Assessment of RC Structures Using Electromagnetic Waves/ Halabe, Maser; and Kausel

524 Effect of Filler Materials on Rheological Properties of Fresh Concrete/ Wallevik, Saasen, and Gjorv
529 Damage Induced by Calcium Nitrite/ Hope and Thompson

532 Chloride Ion Determination/ Haque and Kayyali

542 Influence of Fly Ash, Silica Fume, and Slag on Sulfate Resistance of Concrete/ Mangat and Khatib

553 Plastic Shrinkage Cracking of Polypropylene Fiber Concrete/ Soroushian, Mirza, and Alhozaimy

561 Fracture Mechanics Approach to Evaluation of Flexural Strength/ Rokugo, Uchida, Katoh, and Koyanagi