Ismail Cv (2) (1)

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 6

ISMAIL BABATUNDE RASHEED

Place of Birth: Lagos Nigeria


Marital Status: Married
Street no: 504, Zone 53, Building no: 5 Al Rayyan Qatar
Mobile: (+974) 66108180
E: - mail address: [email protected]
Position: HSE Officer/ Supervisor
Visa Status: Work visa/NOC

PROFILE

An experienced HSE practitioner having (10) years of experience in MEP, Oil &
Gas, High rise building, Bridge erection, road construction. With over 10 years
remarkable work experience in the field of HSE operations with Qatar experience.
Providing a high level of HSE control to create and maintain an injury-free
working environment. Capable of preventing workplace hazards by following
routine inspections and providing training and investigating unsafe acts and
conditions. Multi-talented in safety management and excellent leadership
command control, inter-personal and communication skills, Knowledge in
monitoring confined space/shaft, Excavation, Basic firefighting, and basic life
support (First Aid) and PTW system.

SKILLS

● Over 10 years remarkable work experience in Qatar.


● Excellent Computer skills (Microsoft office, Word, Excel, project etc.)
● Have excellent positive working attitude and always eager to learn.
● Have ability to make right decisions in a critical situation.
● Strong leadership and supervisory skills
● Ability to work under pressure with a high level of accuracy.
● Ability to determine problems and proffer solution.
● Project management skill.
● Hot work assessor.
● Confined space assessor.
WORK EXPERIENCE

Position: HSE Lead Officer


Project: Qatar Armed Force (DUKHAN AIR BASE C-108-01)
Company: Vector Electro-Mechanical (MEP) (2021– TILL
DATE) Main Contractor: Advanced Construction Technologies
(ACT) Consultant: BAHADIR
Client: QATARI EMIRI CORPS OF ENGINEERSWING-5
● Had a strong campaign about a topic which is related to safety as per
client requirement and follow the HSE procedures of the client.
● Making sure all equipment on site has been checked for compliance for
any physical damage detected.
● Organize behavioral safety programs to reduce injuries and to
contribute to the general improvement of health, safety, quality,
morale, and productivity.
● Reporting of Accident or Near Miss and investigating to prevent re-
Occurrence.
● Ensuring implementation of pressure testing.
● Ensure compliance to permit to work system for various work activities
on site like hot work, lifting, confine space and general work permit and
observing of those activities to ensure that they use safe system of work.
● Promotion of occupational health and safety awareness within the company.
● Carrying periodic HSE training, reviewing, and auditing using
company approved HSE management system.
● Ensure implementation of LOTO SYSTEM.
● Provide/develops technical safety training; conducts safety
management training for supervisory and management
personnel.
● Coordinating and assigning HSE officers to their respective locations
based on their knowledge and experience.
● Assisting area HSE manager doing an audit
● Develop, evaluates, and recommends process and equipment changes
and improvements to maximize safety and improve environmental
impacts of operation.
● Provides recommendations and input for revising safety procedures, work
process, and other quality improvement measures.
● Monitoring, reporting, and communicating with, Engineers, Supervisors,
and foreman of obvious unsafe condition and/or unsafe acts detected
and advising control measure.
● Ensure safe work procedure in confined space, hot work, power tool,
work at height and MEWP.
● Reviewing and updating MS and RA as per client’s requirement
● Deliver HSE awareness and induction training and evaluate feedback.
● Provide advice and guidance to manager for workplace hazard identification,
● Conduct risk assessments and implement.
● Assist in investigation of accidents and prepare reports with recommendations,
Monitor HSE legislation and comply with company procedures.
● Deliver HSE awareness and induction training and evaluate feedback.
● Strictly implemented better housekeeping for the job site and to follow
the waste segregation scheme.

Position: HSE officer/Lead


Project: Qatar Technical Institute
Company: Vector Electro-Mechanical (MEP) (OCT 2020 -DEC 2021)
Main Contractor: DOMOPAN QATAR Consultant: ATKINS QATAR

Client: BAE SYSTEM

● Conducting Safety meeting and Toolbox Talk to the workers.


● Regular monitoring of work activities to ensure unsafe acts and
unsafe conditions are immediately identified, corrected, and reported
where necessary.
● Holding progressive meetings with Engineers, Supervisors, and foremen
so as not to deviation from work method statement and risk assessment,
ensuring proper safety measures/procedures are carefully followed at
every stage of operation.
● Making sure all equipment on site has been checked for compliance for
any physical damage detected.
● Carrying periodic HSE training, reviewing, and auditing using
company approved HSE management system.
● Daily and monthly inspection of color coding, first aid box,
fire extinguisher, hand, and power tools, etc.
● Daily and monthly site inspection report to the main contractor

● Ensure safe work procedure in confined space, hot work, power tool, work
at height and MEWP.
● Reviewing and updating MS and RA as per client’s requirement
● Deliver HSE awareness and induction training and evaluate feedback.
● Provide advice and guidance to manager for workplace hazard identification,
● Conduct risk assessments and implement.
● Assist in investigation of accidents and prepare reports
with recommendations.
● Ensured implementation of LOTO system.
● Monitor HSE legislation and comply with company procedures.
● carrying out examinations of machinery, working environments and
structures, taking measurements of noise, heat, and vibrations, and
taking photographs and samples where necessary.
● Deliver HSE awareness and induction training and evaluate feedback.
● Provide advice and guidance to managers for workplace hazard identification.

Position: HSE Officer


Project: ReplacementofShelf BasePlateofSulphurTanksat QG 3& 4–RasLaffan Company: New Evidence Supp

Job Description:
● Implement safety procedures and work practices in line with QP
policy, regulation and procedures are strictly adhere to and stops
any unsafe act or condition.
● Conducting safety meetings and Toolbox Talk.
● Overseeing the permit-to work system and follows up on validity
and conditions of issued PTW.
● Site Visits and General Site Safety Inspection.
● Monitors that safe work practices are always implemented and enforced in
all operations and in compliance to the High Impact Risk Activities
(HIRA) and stops work where conditions or practices are unsafe.
● Accident / Incident Investigation.
● Ensure that all materials, equipment, and power tools used on
yard and site are pat tested /inspected and takes store inventory
on a daily and monthly basis.
● Conduct routine safety inspection, safety audits and safety walk through.
● Ensure hygienic and healthy environment for workforce at the worksite.
● Ensuring safety of the company’s personnel and equipment at worksite.
● Provide and maintain systems of work following JSA.
● Monthly Equipment inspection, Color Coding and Fire Extinguisher in
line with QP fire safety regulations.
● Hazard identification and communication.
● Maintenance of safety reports and records.
● Hazardous zone identification.
● Conduct heat stress awareness and procedure are strictly followed

Position: HSE OFFICER


Project: Qatar National Library Education City (Al -Rayyan)
Company: Alu-Nasa Aluminum Company (Dec 2015- Dec 2016)
Main Contractor: Brookfield Multiplex Med gulf (BMMG)
Consultant: Louis Berger (LB)
Client: Qatar foundation (QF)

Job Description:
● Conducting Safety meeting and Toolbox Talk to the workers.
● Daily and monthly inspection of color coding, first aid box, fire
extinguisher, hand, and power tools, etc.
● Daily and monthly site inspection report to the main contractor
● Ensure safe work procedure in confined space, hot work, power tool, work
at height and MEWP.
● Reviewing and 0updating MS and RA as per client’s requirement
● Partaking in safety meetings and walkdown.
● Inspects and supervises all workers on site to ensure effective
safety services.
● Accident/ incident investigation
● Ensure proper barricading and signage in lifting operation.
Position: FIRE WARDEN
Project: Construction of Hamad International Airport (CP113) Doha Qatar
Company: Permasteelisa Group of company (OCT 2013 –NOV 2015)
Consultant: PARSON
CLIENT: NDIA
Job Description:
● Delivered comprehensive fire warden training programs to educate
and empower staff members.
● Developed and implemented fire safety policies and procedures resulting
in reduced fire hazards.
● Assisted in the development and implementation of emergency
response protocols and procedures.
● Site Visits and General Site Safety Inspection.
● Accident / Incident Investigation.
EDUCATIONAL BACKGROUND
KURAMO COLLEGE V/I LAGOS NIGERIA (SSCE)
2002 - 2008
AMBROSE ALLI UNIVERSITY (EDO STATE
NIGERIA)
(ENVIRONMENTAL MANAGEMENT AND TECHNOLOGY) 2008 – 2012

INSPIRE LONDON COLLEGE


(DIPLOMA IN HEALTH AND SOCIAL CARE) (Level 5) (UK) 2024

PROFFESIONAL TRAINING /CERTIFICATION

● NEBOSH [National Examination Board in Occupational Safety and Health] UK (IGC)


● OSHA 30 HOURS CI
● LIFTING SUPERVISOR
● CONFINED SPACE
● AUTHORIZED GAS TESTER
● COSHH Certification (Control of Substances Hazardous to Health) (Social Cares UK)
● ASSESSING NEEDS (Social Cares UK)
● WOUND CARES CERTIFICATE (UK)
● OSHA 132 [Occupational Safety and Health Administration] OSHACADEMY U.S.A
● FIRST AID/BLS AT HAMMAD INTERNATIONAL TRAINING CENTER
● Computer Operations: MS Word, Excel, Internet (Research and Navigation)
● VALID QATAR DRIVING LICENSE.

PROJECTS ACCOMPLISHMENT

 C-108-01 (DUKHAN AIR BASE) (VECTOR)


 Qatar Technical Institute (AL UDEID) (VECTOR)
 Abraj Al Tahwiliya (QIMC TOWER WEST BAY) (VECTOR)
 LEMIRAGE CITY WALK (BIN MAHMOUD) (VECTOR)
 Qatar National Library Education City (Al -Rayyan) (ALU NASA)

You might also like