Scribd
Upload
7 views4 pages

Commuting Aided Design

Thanks for your help

Uploaded by

Muhammad Muneeb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views4 pages

Commuting Aided Design

Thanks for your help

Uploaded by

Muhammad Muneeb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Commuting Aided Design

Complex Engineering Problem

Submitted To:
Dr Izzat Iqbal Cheema

Submitted By:
2021-CH-255
2021-CH-277

Department of Chemical, Polymer and Composite Material Engineering New Campus


KSK
Assignment
Loop:D

Task

1)Which storage capacity you have selected? and product rate?


Storage Capacity: Atmospheric storage at- 33 oC in insulated cylindrical tanks for
amounts to about 50,000 t per vessel
Production Rate:1250 ton\day
2) Which thermodynamic model(s) you have considered?
Model: Peng Robin Son
3) Draw basic level process simulation diagram?
4) Minimum number of heat exchangers (inclusive of coolers, heaters) required in the
loop?
No.of Heater:1
5) Which block in Aspen Plus you have considered for converter(s)?

Block: Reactor
Reactor type used: RStoic
6) Show process simulation diagram?

7) Show material balance and energy balance sheets for your assigned loop.
Material and Energy Balance :

7) What concentration of ammonia you have achieved in single-stage separation?


99%
8) What concentration of ammonia you have achieved in single-stage separation?
Concentration of Ammonia in single stage separation:
Basically we used another separator for the 99.9% separation.

9) Report energy efficiency and yield percentage you have achieved.


Energy Saving Analysis:

And for Yield Balance:

You might also like