CATALOGUE_DILLING

A GoldStar Group Company
PRODUCT CATALOG 2023
GoldStar
Group
ABOUT US OUR LOCATION
SYSVENCOL is a subsidiary of GoldStar SYSVENCOL is located in

Group. We are highly dedicated to the Venezuela with partners in
needs of our clients, taking into account Miami/Usa, Calgary/Canada and
that they and our employees are the most Georgetown/Guyana
precious treasure for us.
Our location provides us with a
SYSVENCOL is a company focused on the geographical competitive
energy sector providing services and advantage in the Caribbean
products for oil well completion to countries and Latinoamerica
customers with an immediate and efficient
solution to their needs.
SYSVENCOL provides a wide range of

products as Liner Hangers, Packers, Seals
Assy, Sleeves, Down Hole Gauges, Fiber
Optic, VIT, Steam Injection Tools and
accesories
“Providing solutions”
TABLE OF CONTENTS
HANGERS & PACKERS WELLBORE CLEANING TOOLS

GS Storm Brush………………………..........................36
Sysvencol Liner Top Packer “Spark”....................4 GS Scraper………………...............................................37
Sysvencol Liner Top Hanger Packer……………..6 GS Magnet..................................................................38
Sysvencol Patch Tool .................................................8 GS Basket …………………………….…….....................39
Feed-thru Thermal Cup Packer...........................10 10K Cast Iron Bridge Plug…………………...……..40
Sysvencol Open Hole Packer...............................11
Hydrospark…..............................................................13
Hydrospark with feed-thru.……………..………..14
COMPLETION ACCESORIES
Hydrosolace with Feed-Thru...…........................15 Circulation Shoes……………...................................41
Sysvencol Casing Packer.......................................16 Sysvencol Toe Port …….......................................42
Sysvencol Tie-back..................................................18 Sysvencol Ball Drop Sleeve............................43
Thermal Expansion Joint & Coupling..............44
Pump Intake Filter Shoe…..................................45
SERVICE TOOLS Self Aligning Guide Shoe......................................47
Stinger and Stinger receptacles........................48
GS HD retrievable packer left-hand auto......19
Sysvencol Running/Setting Tool......................20 Thermal Seal Assembly........................................49
GS AS Retrievable plug.........................................21 Tuff Torque Shear Sub…………………... ...............50
GS Spring Loaded Retrieving Tool..................22 Tuff Torque Swivel Joint………………..................51
GS-WLAK Wireline Adapter Kit……….............22 Sysvencol Flow Lock Activation Sub………….52
Sysvencol Tubulars Isothermal VIT……………53
RESERVOIR MONITORING DRILLING TOOLS

Downhole Monitoring Systems…………….…23 Sysvencol Tricone Drill Bits………….……..……..56
Permanent Monitoring - PT150 SRO……….25 Sysvencol PDC Drill Bits..…………………….……..57
Artificial Lift Optimization– PCP12-SRO….27
Permanent Monitoring – PT300 SRO………29 ADDITIONAL SERVICES
Retrievable Monitoring – Bubble Tube
System…………………………………………………..31 Stainless Steel Tubing ……………………………….58
Downhole DTS Fiber Optic……………………..33 Chemical injection Services…………..…..……….59
4
LINER PACKER “SPARK”

P
A
C
K
E
R
S
The Sysvencol Liner Packer "Spark" or Thermal application “Spark HT” is a dynamic, durable, and field proven
packer that is simply reliable. The Spark HT is used in applications where both the liner does not need to be
anchored and where thermal expansion is expected. It is a robust seal designed to accommodate thermal expansion
liner movement up to as much as 20 ft. The packer incorporates an extremely short setting sleeve
that considerably shortens the tools profile improving its mobility, and provides the shortest available PBR which
can be adapted with our Tie-back Nipple. The smallest OD and the elimination of a long and rigid tie-back results in
significantly less friction when circulating to clean out the hole, and leads to more success when trying to convey to
depth into tight radius horizontal wells. The Tie-Back Nipple can be released and re-engaged to simplify the
spacing out of completions. All of our hangers are conveyed and retrieved via tubing or drill pipe with our
Running/Setting Tools. The running/setting tools are designed for extreme high torque operations, including
rotating and drilling the liner into position
DYNAMIC SKID RINGS :

The “Spark HT” Thermal Liner Top Seal utilizes top and bottom skid rings that allow the tool and liner to travel
while relieving stress on the seal. The skid rings also act as scrapers that condition the casing upon travel by
removing any irregularities, build-up, and any unwanted materials that may impregnate or damage the seal during
travel. The seal is securely maintained in a set position by an integral ratchet, and volume compensation
mechanisms that sustain the seals effectiveness throughout the life of the installation by maintaining element
energy in all conditions. The seal integrity improves with solid impregnation which is typical given the dynamic
nature of unsecured liner top movement in a thermal well.
FE ATURES AND BENEFITS :

▮ Rated at 675°F and 3000psi
▮ Accommodates up to 20ft of liner travel
▮ Backup seal skid rings accommodate travel and reduce stress on seal
▮ THERMOnator™ thermal element developed over 20 years of thermal experience and testing
▮ Tie-back nipple kit eliminates need for long tie-back receptacle
5
LINER HANGER SIZE CASING Liner

P
Liner x Casing size (in) Casing Size (In) Weight (lb/ft) Size (in) Weight (lb/ft)
A
5" x 7" 7" 23# -38# 5" 11,5# - 18#
C
5- 1/2 " x 7" 7" 17# - 26# 5 - 1/2" 13# - 23#
K
6-5/8" x 8-5/8" 8-5/8" 24# - 32# 6-5/8" 17# - 32#
E
7" x 9-5/8" 9-5/8" 29# - 53,5# 7" 17# - 35#
R
8 - 5/8" x 11-3/4" 11-3/4" 42# - 54# 8-5/8" 24# - 49#
S
9-5/8" x 13-3/8" 13-3/8" 48# - 85# 9-5/8" 29,30# - 53,5#
10-3/4" x 13-3/8" 13-3/8" 48# - 68# 10-3/4" 32# - 55,5#
Smallest available
PBR
with the Sysvencol
Tie-Back
Volume Compensation
Mechanisms
Proven THERMOnator™
Sealing Technology
6
SYSVENCOL LINER TOP HANGER PACKER

P
A
C
K
E
R
S
The Sysvencol retrievable liner top hanger packer is suitable for a wide variety of through tubing applications.
Designed for operation in conventional, extreme, high pressure and thermal environments up to 6000 F, the packer
has been engineered for the most extreme deviated and undulated vertical and horizontal well applications.
The proprietary design offers full 3600 tubing contact with ‘state of the art’ durability, pressure maintenance and
hanging/compression capacity. Our unique dual collet slip design offers bi-directional pressure and force main-
tenance while a one piece inner mandrel provides upper and inner bore sealing, eliminating the need for PBR or
setting sleeve integral seals when used with our Sysvencol Tie Back Nipple.
Designed with simple operation in mind, zero set down weight is required for setting, while a single downward
movement engages the soft release allowing slips and seal mechanisms to release for easy extraction out of the
well.
An available conversion kit allows the Sysvencol Running/Setting tool shear stud to release from the setting tool
and adapter kit, converting it to a conventional electric line setting tool.
COIL TUBING & JOINTED PIPE

The hydraulic setting tool is used to set the Sysvencol Liner Top Hanger Packer. On retrieval, a soft release extension
is supplied which is threaded to our running tool. Stabbing into the liner top hanger packer shears the soft release
mechanism for easy pull and release with a secondary shear release.
7
FEATURES AND BENEFITS
▮ Completely retrievable
▮ Adaptable to Primary or Thermal Seals
▮ Primary Seal rated to 10,000 Psi. P
▮ Thermal Seal rated to 600 F at 2,500 Psi.
▮ Simple, short design makes hole deviation not a concern. A
▮ Ratchet rings maintain seal stress as well as positive slip setting force C
▮ Bi-Directional Slip set with 3600 coverage
▮ Full ID through bore eliminates flow restrictions K
▮ Field adjustable shear setting
▮ Unique and very strong Collet type slips w/ retainers for secure run in
E
▮ Optional Internal PBR and One-Piece Mandrel R
▮ Drill in ready, capable of rotating liners into place when required
▮ Can be installed bellow restriction (nipples) S
- Most special clearances and ID combinations available on request
▮ One piece mandrel increases strength and pressure integrity
▮ Engineered for conventional, hazardous or thermal applications
▮ Soft set option with secondary shear release
▮ Can be installed and retrieved by wireline, coiled tubing or jointed pipe
APPLICATIONS
▮ Straddling or hanging sand control liners ▮ Gravel packing configured for:
across productive intervals - one trip circulating gravel packs
▮ Tubing patch - one trip squeeze gravel packs
▮ Pump seating nipple for slim hole (usually high dense)
completions ▮ Multistage fracturing
▮ Check valve ▮ Cementing wellbore
▮ Blanking plug ▮ Sand Control liners
▮ Down hole choke for injection or ▮ SAGD and CSS Liners
production independent of nipples
LINER HANGER SIZE CASING Liner

5" x 7" 7" 23# -38# 5" 11,5# - 18#
5- 1/2 " x 7" 7" 17# - 26# 5 - 1/2" 13# - 23#
6-5/8" x 8-5/8" 8-5/8" 24# - 32# 6-5/8" 17# - 32#
7" x 9-5/8" 9-5/8" 29# - 53,5# 7" 17# - 35#
8 - 5/8" x 11-3/4" 11-3/4" 42# - 54# 8-5/8" 24# - 49#
9-5/8" x 13-3/8" 13-3/8" 48# - 85# 9-5/8" 29,30# - 53,5#
10-3/4" x 13-3/8" 13-3/8" 48# - 68# 10-3/4" 32# - 55,5#
8
SYSVENCOL PATCH TOOL

P
A
C
K
E
R
S
The Sysvencol Patch provides a durable and dependable SINGLE TRIP SYSTEM
high grade steel tube sealing across casing corrosion, Deployed in a single trip, the Sysvencol Patch is as efficient
perforations, splits or leaks. Deployed in a single trip, as it is simple to install. The patch is set hydraulically by
the Sysvencol Patch is engineered to be fully retrievable. a ball drop. An exceptionally large bore ID allows passage of
It provides an economical solution for casing damage service and logging tools. The large ID allows increased flow
and erosion caused by connate water zones, thermal rates ensuring maximum production efficiency of the well.
cycling, static annular fluid during production and Before disconnecting from the patch, the top and bottom
shearing or collapse caused by formation degradation, sealing element can be fully tested simultaneously. This
swelling or movement. The system incorporates our field eliminates the need to run in hole with expensive and
proven liner hangar packer and seal technology. Both unreliable through patch tools to verify sealing integrity.
tools offer unpar- alleled reliability with a proven track
record of performing in the harshest of environments.
FULLY RETRIEVABLE
Once installed across shear or collapsed mother bore
The Sysvencol Patch is retrieved with straight pull of the
sections, the Sysvencol Patch restores well bore
inner patch tube with the same mechanisms as its com-
integrity for thermal injection, production and well bore
ponents. Deploying the Running tool complete with the
access to productive intervals.
setting tool, the Sysvencol Patch features the industries
INTEGRATED EXPANSION only hydro-mechanical release system. By latching back
The integrated expansion system removes internal ID into the top of the patch and applying both pressure and
changes resulting in an exceptionally smooth internal tension on the work string the patch can be retrieved with
bore, mitigating the risk of erosion which is a typical minimal hook load requirements.
failure mode of traditional patches. The sealing
elements remain static to the casing they are set in,
allowing only the precision ground tungsten carbide
coated mandrel to move in and out of the element,
eliminating the risk of element deterioration and
compromising the seal
9
THERMOnator™
The ThermonatorTM element is comprised of a blend of stainless steel, inconel
SAFESLIP™ SLIPS
Energized with the SureSet™ mechanism, the self-centralizing
P
A
and graphite. The element maintains sealing integrity through a stainless steel slips have been field proven in the harshest of environments. The backup
system as well as a volume compensation mechanism that maintain SureSet™ mechanism ensures there is a constant force setting the
set force in the element at all
tim collet slips into the casing ID and at the same time ensuring slips are
es.
never over stressed during and post setting.
C
K
INTEGRATED EXPANSION
Proprietary Integrated Expansion System ensures the Patch remains secured to the casing at all times while
RETRIEVEASE™
Retrieval is facilitated by RetrievEASETM technology, allowing the energy within the slips and sealing
E
R
temperature fluctuations are accommodated by allowing the mandrel itself to travel up and down while element to be dissipated during the retrieval process. The result is the industry’s only opposing slip
maintaining the sealing element static with respect to the outer casing and energized. hanger that is retrievable with straight pull from the inner mandrel.
S
SYSVENCOL PATCH LINER STRING
This proprietary set of tools sets the Patch with a single ball. Once the Sysvencol Patch has been set, subsequent
retrieval of the inner string allows full acces to the well bore.
SETTING
BEAST TOOL RUNNING
EX-TRACK TOOL DYNASET
DYNASETTOOL
DYNAST NG CUP TYPE TOOL

STINGER TOOL CUP PACKER TOOL
LINER HANGER SIZE CASING LINER

5" x 7" 7" 23# -38# 5" 11# - 18#
5- 1/2 " x 7 -1/2" 7" 17# - 26# 5 - 1/2" 13# - 23#
6-5/8" x 8-5/8" 8-5/8" 24# - 32# 6-5/8" 17# - 32#
7" x 9-5/8" 9-5/8" 29# - 53,5# 7" 17# - 35#
8 - 5/8" x 11-3/4" 11-3/4" 42# - 54# 8-5/8" 24# - 49#
9-5/8" x 13-3/8" 13-3/8" 48# - 85# 9-5/8" 29,30# - 53,5#
10-3/4" x 13-3/8" 13-3/8" 48# - 68# 10-3/4" 32# - 55,5#
10
FEED-THRU THERMAL CUP PACKER

P
A
C
K
E
R
S
The Feed-Thru Thermal Cup Packer is a premium packer designed to effectively seal off a particular area by
providing insulation during stimulation and steam injection activities suitable for Enhance Oil Recovery (EOR)
projects allowing permanente monitoring through its feed thru line. Its thermanite steam cup packers and
metallurgy withstand up to 600 °F. The configuration of the Feed-Thru Thermal Cup Packer allows free
positioning of the cup seals.
FEATURES/BENEFITS PERFOMANCE SPECIFICATIONS

▮ No Setting tool required
Casing Size 7”
▮ Easy installation
Pull Strength 122,500 lbs
▮ Adjustable Cup packer positioning.
▮ Suitable for insulation and stimulation activities. Collapse Pressure 7,000 psi
▮ Thermaite steam cup packers
Burst Pressure 7,000 psi
▮ Permanent monitoring during EOR activities
▮ Available for standards and thermal applications up to
Temperature Rate 600 °F
600 °F
Connections 3-1/2” Hydril CS Pin x Box
Seal Elements Thermanite high perfomance
11
SYSVENCOL OPEN HOLE PACKER

P
A
C
K
E
R
S
Sysvencol Open Hole Packer is a cost effective full bore open hole packer deployed as part of multi-stage stimulation.
Positioned between two stages and creates isolation during stimulation. The number of intervals being stimulated in
a well is equal to the number of open hole packers required.
OPERATION
The packer is set when the on board piston is subject to a differential exceeding its pre-set activation pressure.
The element creates a reliable seal inside the open hole, creating effective isolation between intervals. The design
features an anti-preset function allowing the liner to be conveyed safely and also features anti-extrusion barriers on
the element.
The Sysvencol packer is elegantly simple, yet robust, rugged and effective. The entire tool can be picked up and
threaded on location with no requirement of pup joints or lifting subs. The torque rating of the tool allows for
torque through rig operations when making up connections. Employing a simple, differentially activated piston,
the element sets and maintains the set force with a fine tooth ratchet mechanism. The piston is long enough to
ensure no risk of over-setting the element which traditionally has lead to leaky liner from piston over-extension.
A metal split ring maintains the position of the bottom gauge ring ensuring any forces on the gauge ring running
in hole are easily accommodated.
Engineered with two anti-swabbing mechanisms, it features Equalization Ports and Vulcanized Bonding.
Equalization ports ensure there can never be differential from the OD to the ID of the element, which until now
has been the main cause of element swabbing in longer elements. Vulcanized bonding bonds the rubber to the
metallic gauge ring on each side providing the element with exceptional durability. The adhesion of the bonding
exceeds the mechanical properties of the rubber itself, eliminating the risk of tearing the element from the
gauge ring and subsequently swabbing the element off the packer.
12
P
A
C APPLICATIONS & BENEFITS :
Long piston eliminates over-
▮ Multi-stage stimulation setting
K ▮ Isolation for acid stimulation
E
FEATURES :
R ▮ Anti-Swab Design
Vulcanized bonding to gauge ring
S ▮ Anti-Extrusion barriers on element

ensure efficient pack-off
▮ Unlimited number of packers can be set
simultaneously
Field dressable activation

pressure
PERFOMANCE SPECIFICATIONS
Max Burst Collapse 10,000 psi
Temperature rating 250 °F
Connections As Requested
Open / cased Hole max 5,9”- 9”
Setting Pressure 2453 psi
Tensile 625,000 lbs
Torsional 10,000 ft-lbs
13
HYDROSPARK
P
A
C
K
E
R
S
RELIEABLE THERMAL INSOLATION

The Hydro-SparkTM Thermal Seal is a fully retrievable, hydraulic set packer designed for use in cyclic
steam systems, SAGD, geothermal and compartmentalization applications.
The Hydro-Spark can be successfully set in pipe that has become oblong due to steam cycling and is able to float
with expanding and contracting liners due to temperature cycling. Any number of seals can be run in a well
simultaneously and the seal is ideal for compartmentalization of tubing conveyed ICD and Steam Injection subs /
tools.
APPLICATIONS
▮ Compartmentalization Caing Size 7” 7” 8-5/8” 9-5/8”
▮ CSS
▮ SAGD Tubig Size 4,5” 5” 5,5” 7”
▮ Geothermal
OD 5,95” 5,95” 7,75” 8,50”
FEATURES ID 3,88” 4,151” 4,77” 6,19”

▮ Slim OD and Short overall length,
facilitates Element
3,000 psi 3,000 psi 3,000 psi 3,000 psi
Rating
conveyance
▮ Easy to convey Req. Set
2,000 psi 2,000 psi 2,000 psi 2,000 psi
Pressure
▮ Rated to 650 °F and 3000 PSI
▮ Retrievable with slight over-pull 450,000
Tensile 237,000 psi 237,000 psi 350,000 psi
psi
with Little interference upon
recovery. Burst
2,500 psi 2,500 psi 2,500 psi 2,500 psi
▮ Control line feed through allows Strength
for multi string completions Temperature
650 °F 650 °F 650 °F 650 °F
Rating
14
HYDROSPARK WITH FEED-THRU

P
A
C
K
E
R
S
The Hydro-Spark can also be provided with control line feed through suitable for multi string completion and
cyclic steam systems, SAGD, geothermal and compartmentalization applications. It is able to float with
expanding and contracting liners when temperature cycling exists. Any number of HydroSpark™ assemblies
with control line may be run in a well simultaneously.
FEATURES
▮ Slim OD and Short overall length, facilitates
Casing Size 7” conveyance
▮ Easy to convey
Tubing Size 3,5”
▮ Rated to 600 °F and 2000 PSI
OD 5,95” ▮ Retrievable with slight over-pull with little
ID 2,9”
interference upon recovery.
▮ Control line feed through allows for multi
Working Pressure 5,000 PSI string completions
Element Rating 2.000 PSI
APPLICATIONS
Req Set Pressure 3.500 PSI
▮ Compartmentalization
Tensile Strength 200,000 LBS ▮ CSS
Compression Strength 165.000 LBS ▮ SAGD
▮ Geothermal
Temp Rating 600 °F
15
HYDROSOLACE WITH FEED-THRU

P
A
C
K
E
R
S
DESIGNED FOR MODERN COMPLETION SYSTEMS
Reliable and economic the Hydro-Sole features a unique feed through line which provides the operator the option
of static pressure sensing or fiber optic, thermo-couple or pressure sensors.
With field proven SureSet™ technology it is our most economic, low profile, full bore, and smallest OD hanger
solution. Used as a production or isolation seal bore packer, it was built for a wide range of completion operations
in vertical, deviated, and horizontal wells; for the purposes of gravel packing, fracturing, and hanging liners and sand
control. A one piece mandrel provides maximum torque capabilities, and allows retrieval or fishing from the
mandrel with maximum force.
The short stature features the smallest available OD including the PBR which can be adapted with our Shorty
Thermal and Primary Tie-back Nipple. The elimination of a long and rigid tie-back results in significantly less
friction when circulating to clean out the hole, and leads to more success when trying to convey hangers to depth into
tight radius horizontals.

▮ Feed Through line provides static pressure sensing or optional fiber optic, thermocouple or pressure sensors.
▮ Smallest OD and Length of any Retrievable Liner
▮ Hanger Rating of 675°F and 3,000 PSI thermal and up to 10,000 PSI and 400°F primary.
▮ THERMOnator™ thermal sealing element developed over 20 years of thermal experience and testing
▮ Volume Compensation seal energizing mechanisms maintain full set force in the seal over life of the hanger
▮ Maximum torque rating for turning or drilling into place
▮ Proven reliable ExTrack/Beast Running, Setting and Retrieval Tools, compatible with all our hangers/packers
▮ 360 degree Collet slips, maximum contact and highest available hanging and compression load capacity
▮ Slip shear pins retain slips tightly in position, mitigating potential premature setting during conveyance
▮ SureSet™ mechanism ensures proper transfer of set force from top to bottom slip during life of the hanger.
▮ Shortest available PBR with our Shorty retrievable Tie-Back Nipple designed for thermal (675°F, 3000 Psi) and
primary (up to 10,000 Psi)
▮ Soft and hard release options available for retrieval, a hard release is recommended for thermal environments.
16
SYSVENCOL CASING PACKER

P
A
C
K
E
R
S
Our Casing Packer offers maximum adhesion for complete isolation

control
Sysvencol Packers are a cost effective retrievable family of casing packers deployed as part of multi-stage
stimulation geared towards re-completions. Positioned between two stages in the re-completion, the Sysvencol
Casing Packer creates isolation during stimulation. The number of intervals being stimulated in a well is equal to
the number of packers required. It’s ultra slim running profile means it is ideal to be ran in through milled out
ball seats for re-completions.
OPERATION
Sysvencol Casing Packers are set when the on board piston is subject to a differential exceeding its pre-set
activation pressure. The element creates a reliable seal inside casing, creating effective isolation between
intervals. The design features an anti-preset function allowing the liner to be conveyed safely.
It is elegantly simple, yet robust, rugged and effective. With an overall length of less than 3ft, the entire tool
can be picked up and threaded on location with no requirement of pup joints or lifting subs. Employing a simple,
differentially activated piston, the element sets and maintains the set force with a fine tooth ratchet
mechanism. The piston is long enough to ensure no risk of over-setting the element which traditionally has
lead to leaky liner from piston over-extension. A metal split ring maintains the position of the bottom gauge
ring ensuring any forces on the gauge ring running in hole are easily accommodated.
Engineered with Equalization Ports for anti-swabbling during run-in, the ports ensure there can never be
differentia from the OD to the ID of the element, which until now has been the main cause of element
swabbing in longer elements. Each Sysvencol Casing Packer features an easy unset mechanism which allows
the element to fully collapse and be pulled out of hole.
17
GRIP CONFIGURATION Hydraulic Controlled Grips with easy unset
P
A
Simple pull to release
APPLICATIONS & BENEFITS:

C
▮ Fully Retrievable K
PULL CONFIGURATION ▮ Less than 3’ long
▮ Ultra-slim running profile
E
R
FEATURES: S
Simple pull to release ▮ Anti-Swabbing Design
▮ Anti-Extrusion barriers on
element ensure efficient
packoff
▮ Packers can be set simultaneously
GRIP PULL
Casing Size 4,5” (11,6 – 15,1#)
Max Burst Collapse 10,000 psi
Temperature rating 285 °F
Connections As Requested
Setting Pressure 4,000 psi
Tensile 90,000 lbs
Rotational Shear Max 1,600 ft-lbs
18
SYSVENCOL TIE-BACK
P
A
C
K
E
R
S
Our Liner Top Packers and Liner Top Seals are engineered with one piece mandrels complete with integral PBR, allowing
the operator to tie-back the liner by utilizing the Sysvencol Tieback Nipple Line. Eliminating the need to tie-back to
a setting sleeve of a Liner Top mechanism dramatically decreases potential leak paths. The Sysvencol Tie-Back Nipples
guarantee a high quality seal, are ultra short and snap, lock or locate directly into the mandrel of the Liner Top
Packer and Liner Top Seal.
There are three basic configurations of the Sysvencol Tie-Back Nipple:
▮ Locator Type: Set down to enter PBR with seal and over pull to exit seal from PBR. (No rotation required)
▮ Snap Locator Type: Set down to enter PBR with seal and over pull by predetermined amount to ‘snap’ seal from
PBR. (No rotation required) . Note: release force has to be predetermined and pre ordered.
▮ Latch Locator Type: Set down to enter and latch Seal into PBR and over pull with ¼ turn of right hand rotation at
the tool releases Latch Locator from PBR. Note: only used when being run with jointed work string as rotation. Torque
is required.
FEATURES
▮ Eliminates need for extra-long PBR’s for sealing in and locating on setting sleeves
▮ Eliminates the need for setting sleeve seal
▮ Rated to 7,500 psi Primary
▮ Rated to 2,500 psi Thermal at 600 °F
▮ Rated to strength of Liner
▮ Does not restrict ID or integral strength of our Liner Top Packers and Liner Top Seals
▮ Threads are machined and compatible with most blank, perforated or sand control liners.
19
GS HD RETRIEVABLE PACKER LEFT-HAND AUTO S

E
R
The GS HD Retrievable Packer is a heavy duty service packer ideally suited for all types of squeeze
cementing, formation fracturing, high pressure acidizing, etc. It is a large opening compression set V
packer with hydraulic button-type hold down. This packer withstands high pressure from above or
below and uses a 3-element packing system, J-slot, and a drag block mechanism for easy setting. The I
packer has a built-in unloader which circulates across the hold down buttons to improve
retrievability and run in performance. C
PERFOMANCE SPECIFICATIONS E
Thread
Recommended
Casing Size Casing Weight Connections Box
Hole Size
Up / Pin Down T
17-26 lbs-ft 6,276-6,538 “ 2-7/8” EUE
O
7”
26,0-32,0 lbs-ft 6,094-6,276 “ 2-7/8” EUE
O
32,3-43,5 lbs-ft 8,755 – 9,001“ 4-1/2” EUE L
9-5/8”
43,5-53,5 lbs-ft 8,535 – 8,755” 4-1/2” EUE S
32,75 –45,5 lbs-ft 9,950-10,192” 4-1/2” EUE
10-3/4” 51,0-65,7 lbs-ft 9,560-9,850” 4-1/2” EUE
65,7-91,2 lbs-ft 9,032-9,560” 4-1/2” EUE
Differential Tensile Load Thru

Casing Size Hanging Weight
Pressure Tool
7” 10,000 psi 135,000 lbs 135,000 lbs
9-5/8” 8,000 psi 214,000 lbs 214,000 lbs
10-3/4” 8,000 psi 214,000 lbs 214,000 lbs
Temperature
Rubber Type
Range
Other sizes available upon request.
Nitrile 70 – 250 °F
Contac GoldStar Group Sales For 250 ° F + specifications
HSN (HNBR) 70 - 300 °F
Viton 100 – 350 °F
20
S SYSVENCOL SETTING TOOL BEAST

E RUNNING AND RETRIEVING TOOL
R
V
I
C
E The Sysvencol Running / Setting tool is a Dual-Cylinder, hydraulically actuated. This Setting tool designed for
vigorous push, pull, drill-down, and drill-in operations in tension or compression when working liners to
bottom. The Running Tool will run and retrieve any of our Liner Hanger or Liner top Seals. With only the
T weight of the Running Tool, the snap latch collet thread engages into the running thread receptacle on the
one piece mandrel of any of our liner top equipment. The high torque clutch, capable of up to 30,000 ft-lbs
O of torque (in some sizes) , automatically engages the matching clutch of the one piece mandrel.
O
PRIMARY HYDRAULIC RELEASE:
L The tool is operated by two separate stages of hydraulic pressure differential. The first pressure stage acti-
S vates the dual piston setting tool, which initiates and completes the hanger set. Once set, a second higher
pressure stage shears the tools release sleeve providing circulation indicating positive release. Setting down
collapses the unique collet running thread, disengaging from the liner top and held in the unset position
eliminating the possibility of re-latching the hanger.
SECONDARY LEFT HAND RELEASE:

A secondary safety release can be activated in the unlikely event that the tool string cannot be
pressurized. The tool can be set to shear with left hand rotation at the tool, at a pre-specified value, and
then weight can be set down to release the tool from the liner.
TERTIARY THREAD OUT RELEASE:

In the unlikely event that the secondary left hand release has been completed but the running tool will
still not release from the liner, it can be released from the liner with right-hand rotation.
FEATURES:
▮ Most simple and robust Running/Setting Tool available, stab-in and hydraulic release
▮ One tool sets and retrieves all Sysvencol Liner top Equipment
▮ Simple operation, redress and field adjustable shear setting
▮ High Torque through capacity
▮ Circulation Tell-Tale indicates release from liner
▮ Once unset, circulation is to the bottom of the running tool
▮ Compression capabilities during run in hole without release
21
GS AS RETRIEVABLE PLUG S
E
R
The GS AS Retrievable Bridge Plug is a high pressure plug for multiple zone and selective single zone V
operations such as acidizing, fracturing, cementing and testing. It features a large internal by-pass to
reduce swabbing when running and retrieving. The by-pass closes during the setting of the plug and I
opens prior to releasing the upper slips to equalize pressure when unsetting. The by-pass is located
C
directly below the upper slips to help wash debris when the by-pass is open. This tool can be set in
tension or compression. It can be set shallow in unsupported casing to contain pressure while E
working on wellhead equipment. It can be set in tension making it ideal for setting shallow to test
wellhead equipment and also deep, high-pressure wells.
T
O
PERFOMANCE SPECIFICATIONS O
Casing Size Casing Weight
Recommended
Thread
Connections Box L
Hole Size
Up / Pin Down
S
17-26 lbs-ft 6,276-6,538 “ 2-7/8” EUE
7”
26,0-32,0 lbs-ft 6,094-6,276 “ 2-7/8” EUE
32,3-43,5 lbs-ft 8,755 – 9,001“ 3-1/2” EUE

9-5/8”
43,5-53,5 lbs-ft 8,535 – 8,755” 3-1/2” EUE
Differential Tensile Load Thru

Casing Size Hanging Weight
Pressure Tool
7” 10,000 psi 80,000 lbs 80,000 lbs
9-5/8” 8,000 psi 106,200 lbs 106,200 lbs
Temperature
Rubber Type
Range
Nitrile 70 – 250 °F
Other sizes available upon request.
70 - 300 °F Contac GoldStar Group Sales For 250 ° F + specifications

HSN (HNBR)
Viton 100 – 350 °F
22
S GS SPRING LOADED RETRIEVING TOOL

E
R
V
I
C
E
The GS Spring Loaded Retrieving Tool is used to set and retrieve the GS AS Retrievable Bridge Plug
T Casing size Tool OD Tool ID Thread connection

(in) (in) (in) box up
O 7 5.875 2.50 2-7/8 EUE
O
L
S
GS-WLAK WIRELINE ADAPTER KIT FOR ASW

RETRIEVABLE BRIDGE PLUG
The GS Wireline Adapter Kit (WLAK) for ASW Retrievable Bridge Plugs is used to set ASW Retrievable Bridge
Plugs on electric wireline or with a hydraulic setting assembly on tubing. The WLAK automatically disconnects
from the bridge plug during packer setting to be easily retrieved and prepared to run again.
Casing size Tool OD

(in) (in)
8-5/8” – 14” 6.000
23
R
DOWNHOLE MONITORING SYSTEMS
E
S
COMPLETE PRODUCT LINE E
SYSVENCOL has products and solutions that cover most of the market segments for
R
downhole instrumentation and monitoring products. V
Accountability means being responsible.
O
Responsibility is being in charge of delivering a satisfactory outcome.
For a company to be truly responsible for successful downhole instrumentation I
installations, it must offer a complete solution. This is where SYSVENCOL from any R
other downhole instrumentation company.
DEPLOYMENT OPTIONS
Tubing Conveyed Systems Cemented In Systems
M
Suspended Systems Artificial Lift Systems O
Multi Gauge Systems Permanent P&T Systems
Deep Horizontal Systems Systems (500°C) High Pressure Systems N
Intrinsically Safe Deployments (Mining) Environmental
I
OTHER ACCESORIES T
Quartz Memory Tools Cable Protectors
Wireless EM Tools Installation Tools & Spoolers O
Wireless Inclination Tool Centralizers
R
SENSOR TECHNOLOGIES I
Piezo-Resistive Sensors Analog 4-20 mA Sensors
Quartz Sensors Downhole Thermocouples N
High Temp Piezometers
High Temp Strain
Bubble Tube G
SURFACE SOLUTIONS
Solar Panel Operated SCADA / DCS
Systems Connectivity
Wireless Data Transmission VFD Integration
Flow Meters Surface Pressure Gauges
PUMP CONTROL LAND BASE SYSTEM OFFSHORE
Progressive Cavity Pump (PCP)

Completion Illustration
24
R
DOWNHOLE-GAUGE APPLICATIONS
E
S
E
R P105 PT105 PT150 S150 VW250 Q125 Q177 PTV150 AL150 PCP12 IM10 PT300 Bubble
Tube
V Artificial Lift Optimization
O Rod Pump • • • • • • • •
I Progressive Cavity • • • • • • • • • •
Electrical Submersible • • • • • • • • •
R Artificial Lift
Measurements
Pump Intake Pressure • • • • • • • • • • •
M Pump Intake Temperature • • • • • • • • • •
Discharge Pressure & Temp. • • •
O Vibration • • •
N Downhole Rotor Speed •

Downhole Pump Slip & Stick •
I Downhole Rotor Positioning •
T Distributed Temperature • •
Observation Wells
O Multi Zone Observation • • • • • •
R Tubing Conveyed • • • • • • • • • • • • •
Horizontal Completion • • • • • • • • • • •
I Cemented Behind Casing • • • • • • • • • •
N Injection Disposal Wells • • • • • • • • •

Suspended Wellbore • • • • • • • •
G Monitoring (Wireline SRO)
Cap Rock Monitoring • • • • • • •
Water Well Level Monitoring • • • • • • •
Surface Water Monitoring • • • • •
SAGD Geothermal Observation • •
High End Reservoir Analysis
and Interference Testing • •
25
R
PERMANENT MONITORING – PT150 SRO
DIGITAL DOWNHOLE PRESSURE AND TEMPERATURE E
S
E
HIGH QUALITY DATA WITH RELIABLE PERFORMANCE R
Patented integrated Easy Connect pressure testable cablehead design allows direct V
connection to downhole instrumentation cable using metal-to-metal sealing
technology.
O
Easy
I
Gauge body constructed out of 316L stainless steel or Inconel 825 with Hastelloy
diaphragm for corrosive applications.
connect
Cablehead R
Fully welded construction ensures maximum protection against gas and fluid
invasion.
Pressure M
Testable
Multi-gauge. Up to 10 gauges, any combination of Piezoresistive or Quartz, can be Design O
connected to a single downhole tubing encapsulated cable (TEC).
N
Smart Technology. In addition to just recording and transmitting downhole
pressure and temperature data, SYSVENCOL gauges communicate other important
MTM Primary
and Secondary I
Sealing Section
data that is critical for diagnosis and prompt troubleshooting including: device T
configuration, device health, downhole head voltage, current, calibration files and
downhole serial number identity. O
Field Programmable. SYSVENCOL gauges can be configured for single or multi R
gauge applications and work on long lengths of TEC, up to 15,000 meters (50,000
feet).
I
N
PRODUCT SUMMARY
Provides a reliable means of collecting high-quality, real-time downhole pressure G
and temperature data.
Direct and simple hookup to pump controllers, loggers, supervisory control and
data acquisition (SCADA) systems, programmable logic controllers (PLCs) and
variable speed drives (VSDs).
Includes RTU Modbus and 4-20 mA communication outputs.
QUALITY ASSURANCE
Each gauge and G6 gauge controller is IEC 61326 certified by LabTest Certification
Inc.. Important protective benefits that make SYSVENCOL systems more reliable
include Electrical fast transients / burst surge immunity tested to 4kV, Immunity
testing, Electrostatic discharge protection to 15,000 Volts, RF Radiated Immunity,
Magnetic field immunity, Voltage dips & Interruptions protection on supply line,
and Conducted RF immunity. This process prevents system failure due to incorrect
field wiring, poor quality source power, improper grounding, and lightening strikes.
ISO certified manufacturing.
26
R
E DIGITAL DOWNHOLE PRESSURE AND TEMPERATURE
S
E
R
V
O
I
R
M
O
N
I
T
O
R
I
N
G
DOWNHOLE APPLICATIONS
• Reservoir analysis (Transient-pressure analysis)
• Observation wells
• VSD control
• Multi-zone: Production , Injection wells
• Monitoring frac / Acid jobs
27
R
DOWNHOLE ARTIFICIAL LIFT OPTIMIZATION
PCP12 SRO E
S
E
The PCP12 SRO exemplifies SYSVENCOL’s relentless commitment to downhole R
reliability and development of downhole instrumentation features that help our
customers increase production and reduce workovers. V
SYSVENCOL gauges have a mechanical engineering advantage that improves long-
O
term performance and data quality while simplifying the installation process. I
GAUGE SYSTEM
12-IN-1 R
MEASUREMENTS
MEASUREMENTS DATA APPLICATION
Pump intake pressure Monitoring and controlling wellbore fluid

1. Pump intake M
pressure
and temperature level to prevent pumping off, reduce
sanding off and increase production. O
2. Pump intake
Also useful for preventing gas production
through the stator.
temperature N
Pump discharge 3. Pump discharge
pressure
I
pressure Real-time pump performance. Measure
pump efficiencies. Useful for emergency
4. Pump discharge
T
shut off measurement.
temperature O
Pump discharge Monitoring elastomer wear.
5. X vibration
R
temperature 6. Z vibration
I
X and Z vibration Early observation of abnormal pump
7. Downhole
rod speed N
performance caused by mechanical
failure, gas, phase changes or solids 8. Surface rod speed G
produced through the stator.
Downhole Rod Speed Measure Downhole and surface speeds. Twist is
9. Rotor Stick
Surface Speed calculated value that expresses sticking and slippage and Slip
Downhole Twist of rotor.
10. Rotor positioning
Rotor Positioning Measuring rotor position enables operators to 11. Optional surface
perfectly space out sucker rod string and initial rotor casing pressure
engagement. Continued measurement provides operators the
option of utilizing a rod rig and repositioning the rotor 12. Accumulated
thereby prolonging pump life. pump rotation
count
Accumulated surface and The accumulated pump rotation count
downhole pump rotation lets the operator benchmark lifetime
count operational statistics.
Optional Surface Casing The addition of a surface pressure gauge

Pressure Gauge enables GEO PSI to fine tune it’s wellbore
fluid level calculation.
28
R
DOWNHOLE ARTIFICIAL LIFT OPTIMIZATION
E PCP12 SRO
S
E
R MTM Intake
Primary
V Autoclave
Sealing
Pressure
Sensor MTM
Sealing
O
I
R
M Discharge
Pressure Sensor Vibration Sensor Electronic Section
O
TECHNICAL SPECIFICATIONS
N
Output Phase Shift-Key (PSK) telemetry with
I embedded frequency encoding
DOWNHOLE APLICATIONS
T Input voltage range 9-24 Volts DC
Available pressure ranges 300 1,000 1,500

O 3,000 5,000 6,000
R 10,000 psiA*
Temperature rating 150°C/302°F

I Pressure accuracy ± 0.05% Full Scale
N Pressure resolution 0.01 PSI

Temperature accuracy
G
±1°C
Vibration sensors and 36 g range
resolution data 0.034 g resolution
Dimensions Length 14 7/8” (200.02 mm) x Width 2 1/8” (53.975
mm) x Depth 7/8” (22.225 mm)
Transducer type Piezoresistive
Magnometer 24-bit resolution
Mechanical body Stainless steel 316
Process connections Female autoclave
Sample speed Two samples per second for pressure and
Temperature
Up to 1,200 rpm for downhole and surface rod
rotation speed
29
R
DIGITAL DOWNHOLE EXTREME PRESSURE AND TEMPERATURE E
S
E
R
V
FEATURES
▮ Patented integrated Easy Connect cablehead system. Dual
O
Metal-to-metal
metal to metal sealing design, factory pressure tested TEC seal

I
before deployment.
R
▮ Stainless Steel 316L construction ensures that gauge can
be deployed in hostile environments.
▮ Leak proof engineering. Gauge body and sensor body area
M
e-beam welded shut. O
▮ Designed to endure vibration and shock associated with N
various artificial lift systems including metal to metal PCP’s
I
Factory welded T
metal-to-metal
primary and O
secondary sealing
section R
SAGD REAL TIME DATA APPLICATIONS
I
• Pump Intake Pressure and Temperature
N
• Steam Chamber Evaluation
• Progressive Cavity Pump Optimization G
• Electric Submersible Pump Optimization
30
R
E DIGITAL DOWNHOLE EXTREME PRESSURE AND TEMPERATURE
S
E
R
V TECHNICAL SPECIFICATIONS
O FEATURE
Output Modbus RTU
I Input Voltage: 12 to 24 Volts DC at 50 mA
R Available Pressure Ranges: 1,000 1,500 2,000 5,000

10,000 15,000 20,000 psiA
Operating Range: -40°C to +300°C
Vibration and Shock Excellent
M Resiliency:
O Pressure Accuracy:
Pressure Resolution:
±1% Full Scale
±0.1 psi
N Pressure Drift: 1% per year
I
Temperature Accuracy: ±1°C
Compatible TEC Cable
DOWNHOLE APLICATIONS
GEO PSI 4mm (0.160”) Four
T Conductor 300°C Stainless Steel or

Inconel 825
O Outside Diameter 1.25 inches or 3.175 cm
R
Overall Length 9.20 inches or 23.368 cm including
pressure testable cablehead
I Process Connection: HF4 (0.25” Female Autoclave)
N
G
SYSEVNCOL 300º C Four Conductor downhole instrumentation cable
31
R
RETRIEVABLE MONITORING – BUBLE TUBE SYTEM
DOWNHOLE EXTREME PRESSURE AND TEMPERATURE E
S
BUBBLE TUBE PRESSURE COLLECTION E
The primary advantages of bubble tube pressure collection systems are system reliability and cost-effectiveness R
The concept is very simple. An automated system controls pressurized inert gas such as nitrogen or helium, which V
is injected down a capillary tube that into a pressure chamber or fluid into the wellbore causing a purge. The O
capillary is to clamp to the exterior of the producing tubing string from the desired depth to surface. The Buble
Tube will package a Ø1/8”, MgO mineral insulated, 316SS sheathed, type-K thermocouple cable inside Ø1/2” x I
0.049”wt Duplex Alloy 2205 capillary tubing. The MI thermocouple cable will provide points of temperature R
monitoring at the desired depths, while the capillary tubing annulus will act as a bubble tube conduit for single
point pressure monitoring at bottom hole. An automated solenoid valve is then closed. The reservoir pressure fights
back, compressing the inert gas column in the capillary tube. A high-end piezoresistive transducer measures the M
compressed pressure at surface and the SYSVENCOL logger makes an accurate downhole calculation of the
O
reservoir pressure.
Bubble tube systems are very low maintenance. SYSVENCOL engineers each solution so that the inert gas supply
N
only needs recharging every 1 to 3 months. I
In some cases, supplied natural gas can be substituted for nitrogen or helium. T
Although bubble tube technology has been used for bottomhole pressure calculations for over 75 years, its overall O
reliability and cost-effectiveness has kept it relevant to this day. Currently, bubble tube technology is commonly
R
deployed in SAGD, high-temperature offshore fields, geo-thermal energy completions and enhanced oil recovery
systems using steam floods across the world. I
SOLENOID VALVE
N
AND TRANSDUCER PRESSURE GAUGE
DOWNHOLE G
SURFACE PRESSURE
MONITORING EQUIPMENT
SURFACE WELLBORE
Chamber condition GAS PRESSURE
WELLBORE HYDROSTATIC
prior to purge FLUID PRESSURE
COMPRESSED GAS
PRESSURE IN SYSTEM TO
MONITOR BOTTOMHOLE
PRESSURE PERFORMANCE STATISTICS PRESSURE
▮ Accuracy ± 0.50% full scale (standard)

▮ Resolution 16-bit Analog to Digital (A–D) SOLENOID VALVE
AND TRANSDUCER PRESSURE GAUGE
processing
DOWNHOLE
▮ Temperature Rating 300°C
SURFACE PRESSURE
MONITORING EQUIPMENT
After the gas has SURFACE WELLBORE

GAS PRESSURE
equalized with the BHP, WELLBORE HYDROSTATIC
gas injection is stopped FLUID PRESSURE
COMPRESSED GAS
PRESSURE IN SYSTEM TO
MONITOR BOTTOMHOLE
PRESSURE
32
R
RETRIEVABLE MONITORING – BUBLE TUBE SYTEM
E DOWNHOLE EXTREME PRESSURE AND TEMPERATURE
S
E
R
TYPE-K MINERAL INSULATION (MI) THERMOCOUPLE CABLE FOR TEMPERATURE MONITORING
V
SYSVENCOL’s choice of thermocouple cable for these high temperature applications is a magnesium oxide (MgO)
O mineral insulation (MI) cable, as it is proven to be the most robust and long lasting cable designed for these
I thermal applications. MI cable is selected over PFA Insulated Thermocouple wires due to its proven reliability at
high temperatures. Type-K MI thermocouple cables are rated to 600°C. SYSVENCOL’s experience with MI cables
R
over the past eight years has been virtually 100% successful with several thousands of MI cable installations.
SYSVENCOL’s MI thermocouple cables have excellent mechanical strength, and are resistant to stresses such as
M bending, twisting, or flattening, as well as superior corrosion and scaling resistance. Type-K thermocouples are
accurate to ±2.2°C.
O
N
I
T
O
MINERAL INSULATION (MgO)
R
I ∅,125” (∅ 1/8”) 316SS SHEATH
SOLENOID VALVE
N ANDPAIR
TRANSDUCER PRESSURE GAUGE
25 AWG TYPE-K THERMOCOUPLE
G
Description Specification
OD 0,125”
Thermocouple per Cable As Requested
Sheath Material 316SS
Mineral insulation Magnesium Oxide (MgO)
Thermocuple Type Type – K Chromel/alumel rated to 600 °C (1112 °F)

Accuracy +/- 2,2 °C / Special limits cable available, accurate to +/- 1,1 °C
33
R
DOWNHOLE DTS FIBER OPTIC
DOWNHOLE EXTREME TEMPERATURE E
S
E
SYSVENCOL DTS R
SYSVENCOL’s fiber optic distributed-temperature-sensing (DTS) provides spatial temperature profile data across V
a horizontal or vertical wellbore. SYSVENCOL DTS systems can be deployed as a permanent downhole monitoring
system or a short term wellbore logging intervention with SYSVENCOL’s Fiber eSlickline or Coiled Tubing
O
deployment services. Both single and dual loop DTS fiber systems are available. Additionally, SYSVENCOL DTS I
systems can be deployed in conjunction with various types of downhole pressure sensors. Surface equipment can
R
be installed permanently or mobilized when needed.
APLICATIONS
▮ Characterization of production zones and cross flow identification
M
▮ Injection and stimulation performance monitoring O
▮ Detection of water or gas breakthrough N
▮ Determination of wellbore fluid rates
I
▮ Early identification of well problems including:
 Gas migration behind casing T
 Gas migration behind casing O
 Leaks and thief zones.
 Waxes and Asphaltenes R
I
FEATURES AND BENEFITS N
▮ SYSVENCOL 4mm Incoloy and Stainless Steel manufactured armoured fiber in metal tube (TUBES) have the
best crush protection in the market. Critical for permanent downhole applications, DTS Fiber eSlickline, and G
Coiled Tubing deployment services.
▮ Long lasting downhole fiber is provided by industry leading partners. Products available for downhole
temperature ratings from 85°C to 300°C
▮ Surface interrogators with high measurements repeatability, lower power laser for safe use and long
▮ Smart Calibration feature automatically corrects measurement of fibers with varying

refractive indexes and strain.
▮ Surface electronic operating temperature range of -40°C to +65°C
▮ Integrated switch and autonomous scheduling functionality for cost effective monitoring of multiple wells.
▮ State of the art viewing and modeling software is available.
34
R
E DOWNHOLE EXTREME TEMPERATURE
S
E
R DEPLOYMENT METHODS
V ▮ Permanent cemented in casing conveyed systems.
O ▮ Tubing conveyed systems. SYSVE
NCO
SERVIC
ES & TOO
LS
I ▮ SYSVENCOL DTS eSlickline

▮ Coiled Tubing Deployed
R SYSVENCOL DTS eSLICKLINE UNIT
M
SYSVENCOL ARMORED FIMT TUBES
O ▮ Best available crush protection.
N ▮ Versatile.
SYSVENCOL DTS Fiber Interrogator
▮ Perfect for DTS eSlickline.
I ▮ Perfect for coiled tubing deployment.
T
O
R
DISTRIBUTED TEMPERATURE SOFTWARE
I
N
G
35
R
DOWNHOLE EXTREME TEMPERATURE E
S
E
R
TECHNICAL SPECIFICATIONS
V
Housing Option -H02 (Outdoor)
Operating Temperature Range -10 °C to +65 °C O
(-40 °C to +50 °C with option –T01 Outdoor Extreme:
-25 °C to 65 °C with option –T02 Outdoor Extended) I
Storage Temperature Range
Operating Humidity Range
-40 °C to 80 °C
0 % to 95 % r.h.
R
Non condensing
Dimensions (H x W x D)
500 x 400 x 150 mm M

O
Weight 17 kg
N
SENSING FIBER
Fiber types MM 50/125 µm graded index
I
MM 62.5/125 µm graded index
T
Dynamic Range (two-way) For option -002: 10 dB
For option -004: 14 dB O
For option -008: 22 dB
For option -012: 30 dB R
Sensing Temperature range -273°C to +1200°C depending on sensor coating
I
INTERFACES N
Optical connector E2000 APC 8° angled
Number of channels 1 - 24 G
Computer interface USB, Ethernet (LAN)
Communication protocol SCPI; Modbus TCP/IP (option -060), OPC
Power Supply 10 V to 30 V DC
Power Consumption 17 W typically, at 20°C ambient temperature;

<40 W (entire operating conditions);
<50 W with –T01 Outdoor Extreme / -T02 Outdoor Extended
OTHER
Measurement Time 10 s to 24 h (adjustable) for sensor length ≤ 8 km
30 s to 24 h (adjustable)
Available Spatial Resolution settings 0.5 m, 1 m, 2 m, 4 m, 6 m, 8 m
Available measurement modes Single-ended; Dual-ended (incl. fiber break recovery)
Internal data storage capability 120 traces total
Power supply (option) operating conditions 0 °C to +50 °C; non condensing, indoor use only
Laser class (IEC 60825-1:2007) 1M (eye-safe)
36
W
E
GS BRUSH
L WELLBORE CLEANING BRUSH, HEAVY DUTY NON-ROTATING
L
B
O
R
E
C
L
E
A
N The GS Wellbore Cleaning Brush is run as an integral part of the string to brush the casing wall as the pipe is run
I in hole. It can be run as part of most cleaning/polishing assemblies, as a stand-alone device or with other down-
hole tools as part of the clean-up system.
N
G Six/Eight brush pads are mounted within the mandrel altogether offering 360° of casing wall coverage. Installed
in each brush pad are rows of bristles. The spring-activated pads are forced outwards against the casing wall. The
T pad pressure can be customized to well geometry according with customer requirement.
O
O
Thread
L Casing
Inside diameter
Tool OD
connection
S Size Weight (in) (in) pin down
(IN) (LBS/FT)
7 17.0 – 38.0 2 1/8 5.969 3 1/2 IF
7-5/8 39.0 - 44.0 2 1/8 6.062 3 1/2 IF
9 5/8 40.0 – 58.0 3.00 7.500 4 1/2 IF
Size Diff pressure Working

Tensile load Torque
temperature
(IN) (MAX) (max) (max)
(max)
7 10,000 psi 600 °F 200,000 lbs 20,000 ft-lbs
7 5/8 10,000 psi 600 °F 200,000 lbs 20,000 ft-lbs
9 5/8 10,000 psi 600 °F 200,000 lbs 20,000 ft-lbs
37
W
GS SCRAPER E
WELLBORE CLEANING SCRAPER, HEAVY DUTY NON-ROTATING L
L
B
O
R
E
C
L
E
A
The GS Casing Scraper is designed for different casing sizes and is considered as a fundamental tool in wellbore N
cleaning services usually placed as the first tool for the assembly. Its maintenance is easy as it is an assembly tool, I
so each part can be removed and replaced in case of damage.
N
G
Casing Tool OD
Thread T
connection
Size Weight
Inside diameter
(in) pin down
O
(in)
(in) (lbs/ft) O
7 17.0 – 38.0 2 1/8 5.969 3 1/2 IF L
7-5/8 39.0 - 44.0 2 1/8 6.062 3 1/2 IF
S
9 5/8 40.0 – 58.0 3.00 7.500 4 1/2 IF

Tensile load Torque
temperature
(max)
7 10,000 psi 600 °F 200,000 lbs 20,000 ft-lbs
7 5/8 10,000 psi 600 °F 200,000 lbs 20,000 ft-lbs
9 5/8 10,000 psi 600 °F 200,000 lbs 20,000 ft-lbs
38
W
E
GS MAGNET
L WELLBORE CLEANING MAGNET, HEAVY DUTY NON-ROTATING
L
B
O
R
E
C
L
E
A
N
The GS Casing Magnet can be run above cleaning tools such as the GS Casing Scraper and the GS Storm Brush.
I Suitable for collecting the ferrous flow debris using a fin profile made by the efficient distribution of its magnets.
N
G
T Casing Tool OD
Thread
Inside diameter connection
O Size Weight (in) (in) pin down
O (in) (lbs/ft)
L 7 17.0 – 38.0 2 1/8 5.969 3 1/2 IF
7-5/8 39.0 - 44.0 2 1/8 6.062 3 1/2 IF
S
9 5/8 40.0 – 58.0 3.00 7.500 4 1/2 IF

Tensile load Torque
temperature
(max)
7 10,000 psi 400 °F 200,000 lbs 20,000 ft-lbs
7 5/8 10,000 psi 400 °F 200,000 lbs 20,000 ft-lbs
9 5/8 10,000 psi 400 °F 200,000 lbs 20,000 ft-lbs
39
W
GSG BASKET E
WELLBORE JUNK BASKET, HEAVY DUTY NON-ROTATING L
L
B
O
The GSG Junk Basket is run as an integral part of the string to collect debris from the wellbore. It
can be run as part of most cleaning/milling assemblies, usually placed above milling or cleaning R
such as scrapers and brushes. E
The GSG Junk Basket is designed to capture debris in its large capacity basket by a sudden
C
change in flow area, creating a vortex effect that promotes debris to enter the basket, which
contains drain holes that allows for flow recirculation. L
E
A
N
Thread
Casing
Inside Diameter
Fishing neck connection I
Size Weight diameter pin down
(in)
(in) N
(in) (lbs/ft)
7 17.0 – 35.0 2 1/8 5.50 3 1/2 IF
G
9 5/8 43.0 – 53.5 2.11/16 6.50 4 1/2 IF
T
O
O
Collapse Burst Working
Size
pressure pressure
Tensile load Yield torque
temperature
L
(max) (max)
(in) (max) (max) (max) S
7 8,000 psi 13,000 psi 150,000 lbs 9,000 ft-lbs 600 °F
9 5/8 10,000 psi 15,000 psi 200,000 lbs 20,000 ft-lbs 600 °F
40
W
E
10K CAST IRON BRIDGE PLUG
L
L
B
The 10K Cast Iron Bridge Plug is an economical bridge plug designed for rapid
O drill-out while maintaining sufficient strength during the set to sustain high
R pressure and temperature. The plug can be set on different types of wireline
pressure setting tools and can also be run on pipe with a hydraulic mechanical
E (HM) setting tool
C FEATURES/BENEFITS
L ▮ Electric wireline set
E ▮Drillable
A ▮Cast iron construction
N ▮One piece slips-hardened to depth of wicker only
I ▮Set in any grade of casing including P-110
N ▮Form Fitting metal back-ups prevent rubber extrusion
G ▮For temporary of permanent service
▮Ratcheting lock ring holds setting force
T ▮Can be run on pipe
O
O
L Casing Size Casing Weight
(in) (lbs/ft)
S
4-1/2” 9,5 – 13,5
5
11,5 - 18
5-1/2 13 - 25
6 10,5-12
6-5/8 17 – 34
7 17 - 38
41
CIRCULATION SHOES A
C
C
E
S
O
R
I
E
S
Our circulation shoes provide a versatile circulating, drill-down or drill in assembly to accommodate any
type of fill or obstruction. Traditional float shoes, when subjected to excessive set-down can bind up and
leave operators in unfortunate situations. Our Circulation Shoes were developed over 1000’s of liner
installations and has a track record of excellent performance in floating, rotating, and liners into place.
BENEFITS AND FEATURES SPECIFICATIONS

▮ Opens at predetermined, field set differential Nominal Size OD Length
▮ Will not open upon surging preventing any potential (in) (in) (in)
plugging or internal contamination
4-1/2” 5” 10”
▮ Made from 4140 corrosion resistant alloys, meeting
MR0175
5” 5,563” 11”
▮ Abrasive Drill-down bullnoses condition the open-hole
during liner operations
5-1/2” 6,05” 11,5”
▮ Proven valve design that has never failed over 1000’s of
installations
6-5/8” 7,39” 12,5”
▮ Adjustable opening Pressure
▮ Thermal ready
7” 7,66” 14”
▮ Dual or Single Valve Configuration
9-5/8” 10,63” 15”
42
A SYSVENCOL TOE PORT

C
C
E
S
O
R
I
The Sysvencol hydraulically actuated frac valve is designed as
E integral part of a multistage stimulation system, providing a means to
S initiate communication with the reservoir. Run with liner, the Toe Port is used
for selective stage stimulation. Closing the flow-through circulation valve allows
communication to be established with the first fracture zone at the toe of the well.
Positioned above the flow-through circulating valve, the frac valve is activated by applying pressure after
circulation valve has been closed. Once activation pressure is reached, the sleeve shifts hydraulically, exposing the
ports to the formation and establishing communication with the zone.
APPLICATIONS & BENEFITS : PERFOMANCE SPECIFICATIONS

▮ Multistage fracturing zonal isolation
▮ Stimulation for casing integrity issues Size 4,5”
▮ Horizontal, deviated, and vertical wells OD 5,5”
ID 2”
Flow area 10,7 square in
FEATURES : Burst Rating 8,000 psi
▮ Valve ratings to 8,000 psi and 285 degF
Temperature 285 °F
▮ Opening pressure of 5,000 psi [34.47 MPa]
Opening 5,000 psi
▮ Large ports increase flow area allows for high flow rates
pressure
▮ Minimal fracturing pump pressure required
Body Tensile 215,000 lbs
▮ Simple increase of internal pressure initiates fracturing
operations
* Additional sizes available upon request
▮ No need for mechanical intervention
▮ Only one valve per system required, placed above flow-
through circulating valve
43
SYSVENCOL BALL DROP SLEEVE A

C
C
E
The Sysvencol Ball Drop Sleeve is a vital part of your completion. Cost effective and S
durable, the valve allows the operator to sequentially fracture a wellbore. After
isolation, each valve is actuated with progressively larger balls. When all zones O
have been stimulated, ball seats can be easily milled out allowing service access to
R
each valve.
I
FEATURES & APPLICATIONS
▮ Un-cemented horizontal, deviated or vertical wells for:
E
◊ Zonal Isolation during multistage hydraulic fracturing S
◊ Zonal Isolations during acidizing treatments
◊ Stimulation in formations where water shut-off may be
required
▮ Rated to 10,000 PSI and 250 degF
▮ One valve per stage
▮ Large exit ports maximize potential stimulation rates
▮ Progressively larger ball sizes
▮ Seats and balls made from proprietary material facilitating mill out
operations
Size 4,5”
OD 5,5”
ID 3,8”
Burst Rating 10,000 psi
Temperature 285 °F
Connection To Match Liner
Opening pressure 1,800 – 2,200 psi
Body Tensile 300,000 lbs
Body Torsional 10,000 ft-lbs
* Additional sizes available upon request
44
A GS THERMAL EXPANTION JOINT

C
C
The GS Thermal Expansion Joint allows the tubing string to expand and
E contract during high temperature injection and cyclical steam operations.
High alloy steel with a double chromed traveling mandrel ensures the
S tool is tough enough to get the job done in the most extreme conditions.
O Using exclusive technology, the sealing element is designed for absolute seal
R integrity during high temperatures and during travel in both directions,
along its polished extension. The Thermal Expansion Joint allows safe
I installation and retrieval of the tubing string and completion components
while maintaining reliable expantion and contraction during production
E and injection.
S
FEATURES & BENEFITS
▮ Reliable operation over temperature extremes
▮ Safe installation and retrieval
▮ Manufactured to customer requirements
Max. OD
Min. ID
Length (Extended) 20 ft
Length (Retracted) 12 ft
Thread Configuration 7” Buttres 23# Pin x Box

Tensile Strength
Compression Strength
Burst Pressure
Temperature 600 °F
45
PUMP INTAKE FILTER SHOE A

C
C
E
Pump Intake control with proven and patented sand control technology providing maximum pump S
protection and life expectancy.
O
The Pump Intake Controller has been designed to be an integral component to our premium sand control media R
providing maximum sand and fine retention when producing pumping oil and gas wells.
I
In a continuous pumping environment liquid and gas flows along the OD and through the Sand control into E
the pump or production tubing intake. Any sands are effectively filtered and sorted by the Sand control, a
continuous build-up of these sands can eventually lead to a sand bridge that can start in the annulus between S
the Sand control and Casing ID. The deposition of sand would normally continue from the bridging point
towards the bottom of each Sand control joint, decreasing productivity and the Sand control’s ability to extend
pump life.
Run in conjunction with one joint, or within multiple joints of Sand control providing many levels of
redundancy, the Pump Intake Controller is designed to divert flow around sand bridging to different
sections of the Sand control media to maximize production, pump life, and sand control.
Once a sand bridge has formed in the annulus, a flowing differential will slowly build opening the adjacent
Extreme Circulation Valve diverting the majority of the well flow through the ID of the slick joint section through
the next Cross over by-pass coupling to the annular area between the OD of the Sand control and ID of
production casing.
The resulting diversion of flow will extend the pump life by the time it takes to fill the annulus between Sand
control section and production casing with formation sand and/or fines. The entire length of the inner slick joint
is produced only once the entire length of Sand control has been covered with formation sand and/or fines.
46
A FEATURES & BENEFITS:

C ▮ Economic
▮ Ran on one or many joints of sand control media provid-
C ing multiple levels of pump protection to extend pump
E life considerably
▮ Pump life is extended by time it takes to fill the entire
S annulus between sand control media and production
casing
O ▮ Reduction of inventory (one gauge fits all sands) OIL AND GAS FLOW WITH
SUSPENDED SAND AND FINES TRAVELS
R ▮ High flow capacity and plugging resistance THE PATH OF LEAST RESISTANCE THROUGH THE
SAND CONTROL MEDIA WITH THE SAND BEING DEPOSITED IN
▮ Reduced completion costs THE ANNULUS.
I ▮ Fewer work overs and longer well life
E ▮ Large open area (40%) and permeability (400D)

▮ Unique 3-D filtration to create negative skin
S ▮ High mechanical strength
▮ Rugged and flexible design
▮ High erosion and corrosion resistance
THE FLOW
APPLICATIONS : CONTINUES WITHIN THE
ID OF THE SAND CONTROL TO THE
▮ All oil and gas producers requiring sand control PUMP INTAKE. EACH SECTION OF SAND CONTROL
▮ All water producers/injectors requiring sand control USED IN THE PUMPING APPLICATION IS SEPARATED
BY A FLOW DIVERTER AND A PUMP INTAKE
▮ Alternative to gravel packing CONTROLLER.
A SINGLE JOINT OF SAND CONTROL REQUIRES ONLY THE END CONE
▮ Stand alone screen (SAS) in open-hole or cased-hole VALVE ASSEMBLY (HIGHLIGHTED ABOVE) WITH NO CROSSOVER’S
OR INNER STRING.
▮ Re-completions inside failed completions
▮ High rate oil/water/gas wells or high viscosity oil wells
▮ Thermal and steam-assisted gravity drainage (SAGD)
wells
▮ Support screen for gravel packing or frac packing
▮ Pump protection, including high-rate ESP wells
▮ Reservoirs with poorly defined grain size
distributions (GSD)
▮ Reservoirs with poorly sorted or widely varying
grain sizes
47
SELF ALIGNING GUIDE SHOE A

C
C
E
S
O
R
I
E
S
The Self-Aligning Guide Shoe allows a seamless entry into Seal Bores when used with a Tie-Back Assembly.
With unlimited re-entry into the seal bore, the Self-Aligning Guide Shoe prevents any hang ups and
avoids harming crucial elements of the seal stack assembly. A double mule shoe design centralizes the BHA
when entering a shouldered entry point. The Self-Aligning Guide Shoe is short and simple that retains a
full bore when installed with a Tie-Back.

▮ Minimalistic design that utilizes very few parts
▮ Fully enclosed design that is not affected by corrosion or solids deposition
▮ A single moving component
▮ Easy to assemble, redress, and reuse
▮ Double mule shoe for entry in any orientation
▮ Compatible in vertical, deviated, and horizontal well configurations
▮ All materials comply with NACE MR0175 for sulfide stress cracking resistance
▮ Unlimited re-entry through restrictions and seal bores
▮ Axially activated, requiring no turn to function.
Seal Bore Size 3”

OD Max 2,98”
ID Min 2,38” * Additional sizes available upon request
Length 14”
Thready type Stub Acme Box

Force to retract 2,500 – 7,500 lbs
Tensile strength 50,000 lbs
48
A STINGER AND STINGER RECEPTACLES

C ORING SEAL SUB
C
E
S
Our polished Stingers
O provide selective isolation points
R during completion and gravel
packing operation. Once stabbed into
I their receptacle, the Stingers provide a
E temporary pressure and fluid seal at the bottom of
the liner string that isolates a pressure actuated bullnose,
S or at the top of a bottom tell tale-circulating screen to ensure fluid reaches the bottom of the sand control
screens to enable complete gravel coverage.
FEATURES/BENEFITS
▮ Ground and Polished stingers ensure a large positive sealing area
▮ Available in variety of lengths and receptacle IDs to accommodate most completion requirements
▮ Premium Metallurgy comply with NACE standards MR0175
ECO-X CIRCULATION STINGER RECEPTACLES

Polished Stinger Receptacles provide selective isolation points during completion and gravel packing operations.
Once stabbed into their receptacle, the Stingers provide a temporary pressure and fluid seal at the bottom of the
liner string that isolates a pressure actuated bullnose, or at the top of a bottom tell tale-circulating screen to
ensure fluid reaches the bottom of the sand control screens to enable complete gravel coverage.
TYPE SC
Type SC
▮ Complete with Chevron type, durable seal PERFOMANCE SPECIFICATIONS
configuration that eliminates the risk of Inner String
Liner Size Thread Type
Nominal Size
seal erosion and performs both in high
4-1/2” 4-1/2” LTC 2-3/8”
temperature and highly corrosive
environments 5” 5 LTC 2-3/8”
5-1/2” 5-1/2” LTC 2-7/8”
TYPE SP 6-5/8” 6-5/8” LTC 2-7/8”
▮ Complete with Loaded O-ring Scrap- 7” 7” LTC 2-7/8”
per Seals that remove debris as the 7-5/8” 7-5/8” LTC 3-1/2”
stinger is stabbed in, ensuring a Type SP 8-5/8” 8-5/8” LTC 3-1/2”
secure seal with no debris.
49
THERMAL SEAL ASSEMBLY A

C
C
The Thermal Seal Assembly is used to Tie-Back to Thermal Liner Hangers and Packers. Used for re-entry in SAGD
and CSS. Seal stem incorporates Seal Stacks made with High Temperature Thermal Seal to create a very robust E
seal capable of withstanding high temperatures, pressures and multiple stab ins.
S
FEATURES AND BENEFITS O
▮ Premium Metallurgy
▮ Thermal Seal material rated for 600 OF and 3,000 psi
R
▮ Thermal Seal stacks I
▮ For use in SAGD and CSS
▮ PBR Scraper to improve sealing surface E
PERFOMANCE SPECIFICATIONS S
ID Min 4,657”
OD Max 6,50”
Sealing length 12 ft 0 in
Total Length 16 ft 6 in
Thread 3-1/2” Tenaris Hydril-CS Box

Working pressure 3,000psi
Tensile strength 200,000 lbs
Temperature 600 °F / 315 °C
AT LARGEST OD
50
A TUFF TORQUE SHEAR SUB

C
C
E
S
O
R
I
E
S The Tuff Torque Shear Sub is designed to allow the transfer of up to 10,000 ft-lbs of torque through the sub,
while shearing at a specified value up to 120,000 lbs. It can be used in thermal environments and maintains
seal integrity up to 600°F.

▮ Supports up to 10,000 ft-lbs torque.
▮ May be set to shear at a tensile force from 0 to 120,000 lbs (in 5000 lbs increments) .
▮ Easy to adjust shear value by changing shear pins.
▮ Operates at temperatures up to 600°F.
Casing Size 4,5”

Casing Weight 12#
OD Max 5,5”
ID Min 3,92”
Thread Size and Type 4,5” 12,6# JFE Bear Box x Pin
Tensile Strength Up to 120,000 lbs
Compression Strength 250,000 lbs
Burst Pressure 3,000 psi
Temperature 675 °F
Torque 10,000 ft-lbs
51
TUFF TORQUE SWIVEL JOINT A

C
C
E
S
O
R
I
E
Tuff Torque Swivel Joint is a torquing swivel joint that connects casing joints used in short radius completion S
applica-tions.

▮ Full bore and no ID restrictions
▮ Available in all API casing sizes
▮ Can be manufactured with API or premium threads
▮ Allows for 7 degrees of swivel while maintaining full torque capabilities
▮ Exceeds strength of conventional API tubular in tension
Casing Size 3,878”

Casing Weight 11,6#
OD Max 5,5”
ID Min 3,88”
Thread Size and Type 4,5” EUE Box x Pin

Tensile Strength 226,000 lbs
Max Pressure 8,000 psi
Temperature 350 °F / 177 °C
52
A SYSVENCOL FLOW LOCK ACTIVATION SUB

C
C
E
S
O
R
I
E
S
The Sysvencol Flow Lock Activation Sub is used for selectively shutting off circulation and allowing pressurization of
the work string. A from surface to the ball seat. Pressure is applied, allowing the sleeve to slide, permanently closing
the csingle ball is dropped circulation valve. Hydraulically set packers can then be pressurized for setting.
BENEFITS
▮ Open-hole vertical, horizontal and deviated
wells for: Size (in) 2,875 3,5 4,5
▮ Carbonite, sandstone and shale play Max OD (in) 3,5 4,13 5,05
stimulation Flow area in2 3 2,25 1,75
▮ Matrix acidizing treatment isolation Max Burst
▮ Multistage fracturing zone isolation Pressure 10,000 10,000 10,000
rating, (psi)
FEATURES Temperature
325 - 350 350 350
Rating, (°F)
▮ Closing pressure of ~1,500 PSI once system
reached TD initiated by ball drop Closing
1,200 –
Pressure, 3,000 2,000
▮ Protection of internal components while 1,500
( psi)
run in-hole
Body Tensile
▮ Valves rated to 10,000 PSI and 3500F 100,000 200,000 300,000
Strength, (lbf)
▮ Positive sleeve closure -eliminates need for
positive ball seat after closure.
▮ Positive seal on closure allows for hydraulic
tool set and/or manipulation
53
SYSVENCOL TUBULARS A
ISOTHERMAL® VIT C
C
E
DESCRIPTION
S
The Sysvencol Isothermal® pipe consists of a set of concentric pipes which have a high vacuum
atmosphere in the annular space to suppress conduction / convection heat losses and to keep O
the heat losses of any fluid injected or produced in the well to a minimum . The high vacuum of
the Isothermal® is produced mechanically by vacuum pumps that reach a limit close to the
R
absolute vacuum (Absolute Zero Pressure: 0 lpca) reinforced by a chemical compound (located I
on the external surface of the internal pipe) called "collector" or getter that ensures the vacuum
in the useful life of the product and metallic treatment of the pipeline to mitigate the migration E
of hydrogen. S
The "collector" upon receiving heat (from the fluid that is injected or produced) and reaching
the temperature of 200º C is activated and initiates a process of absorption of the gases present
in the annular of the pipe, thereby guaranteeing the permanent "vacuum" . In the "vacuum"
there is no heat transfer by conduction or convection, there is only heat transfer by radiation;
which is minimized by the combination of the insulating material "aluminum foil-glass wool"
that covers the external surface of the internal pipe. The heat loss by radiation is minimized due
to the refractory property of the aluminum foil and low thermal conductivity of the glass wool.
FEATURES
▮ It allows the injection or production of hot fluids, minimizing the heat loss of them.
▮ Maintains the quality of the steam in a range of loss of up to 10% against a loss of quality of
44% compared to the standard pipe
▮ It prevents the cooling of the produced oil and therefore maintains its mobility.
▮ Low Thermal Conductivity (k) nominal @ 650º F: 0.0025 - 0.003 BTU / hr x ft x ºF.
▮ By preventing heat transfer, it protects the casing/liner against premature failure due to
thermal fatigue.
APPLICATIONS
▮ Production of extra heavy oil
▮ Steam injection applications
▮ Production of hot oil at deep wells.
54
SYSVENCOL TUBULARS
A ISOTHERMAL® VIT (CONTINUED)
C COMPOUNDS
C Getter-Collector of free gases: The collector is a reactive material made of zirconium /
E titanium and traces of other alloys that is placed inside the annular space created Collector of
between internal and external pipes, which upon reaching 200º C is free gases
S activated and starts to absorb the residual air molecules from the annular space Isolation
O being eliminated in the vacuum chamber. Providing a longer life to the pipeline Layers
R Isolation Layers: Due to the vacuum insulation present in the pipeline, it prevents the
exchange of heat by conduction and convection, alternating layers of aluminum
I Annulus
Vacuum
and glass wool are used to provide the pipe with a barrier capable of minimizing
E heat losses by radiation. Inner tube, secured in place and remaining in the vacuum
S chamber when the inner tube is inserted into the outer tube.
High Vacuum Annulus: After the two pipes are unit by welding, the air present in annular
space generated between the internal and external pipes is sucked by vacuum pumps through
a hole that is drilled in the outer tube, which extract the air, creating a inert and empty
chamber, which is secured by a welded "rivet" in the previously drilled hole, Isolated
leaving the interior at an approximate pressure of 10-5 -10-6 Torr.
Coupling
(1 Torr = 1/760 mmhg),

Isolated Coupling: The vulnerable part of heat transfer in the isothermal pipe is the
connections, since these are not isolated to the vacuum so to avoid the Welding/Joint
Pipe
Migration of energy through this point, an insulating coupling is placed which
depending on the Application of the pipe can be Teflon or grafoil molded high impact. For the
case of the connection buttress the coupling is placed internally and for the case of a CS hydrill
thread the coupling is placed externally. This achieves that the heat losses are lower in these
points. Pipe
external
Joint Welding: A fillet weld is used to join both pipes. Which is tested and
certified through non-destructive tests and through the baking that is given to the pipe
to later corroborate the heat transfer value of each of the joints.
Internal Pipe
Internal and External Pipe: The internal and external pipes are API pipes with
the same mechanical characteristics as any conventional tubular. The external pipe is
coated with an alumina paint to prevent the migration of free gases. Since the
internal pipe will be under heavy thermal stress, it is pre-stressed with 30,000 psi, creating a
compressive effort of 23,000 psi to the external pipe. This configuration of forces helps to
compensate thermal stresses due to the high temperatures to which it will be subjected.
55
SYSVENCOL TUBULARS A
ISOTHERMAL® VIT (CONTINUED) C
C
SIZES AND SPECIFICATIONS
E
SIZE
2-7/8" x 1,9" 3-1/2" x 2-3/8" 4-1/2" x 3-1/2" 4-1/2" x 2-7/8" 5 x 3-1/2" 5-1/2" x 4-1/2"
S
Weight (lbs/ft) 10 14 21 21 24 29 O
Length (ft) 28-32 28-32 28-32 28-32 28-32 28-32 R
Total weight
per pipe (lbs)
300 420 630 555 720 870 I
Outer Tubing
E
OD (in) 2,875 3,5 4,5 4,5 5 5,5
S
Thickness (in) 0,217 0,254 0,25 0,25 0,296 0,304
ID (in) 2,441 2,992 4 4 4,408 4,892

Weight (lbs/ft) 6,5 9,3 11,6 11,6 15 17
Inner Tubing
OD (in) 1,9 2,375 3,5 2,875 3,5 4,5
Thickness (in) 0,145 0,19 0,254 0,217 0,254 0,25
ID (in) 1,61 1,995 2,992 2,441 2,992 4
Weight (lbs/ft) 2,72 4,43 8,81 6,16 8,81 11,3
56
D SYSVENCOL DRILLING TOOLS

R TRICONE DRILL BITS
I
SYSVENCOL TRICONE DRILL BITS
L
The TriCone Bit is the most versatile drill bit on the market. It is the go to drill bit in most styles of drilling.
L
Whether you are drilling a water well or an oil well, SYSVENCOL Drilling Tools has the Tri Cone Drill Bit for you.
I
N THE ADVANTAGES OF USING A TRI CONE OVER OTHER DRILL BITS
▮ There is a Tri Cone suitable for any rock formation
G ▮ Tricone bit is versatile and can handle changing formations
▮ Tri Cones are reasonably priced, long lasting and have an efficient drilling rate
T Depending on your application, SYSVENCOL Drilling can provide you with new, re-run or premium oil field quality
O Tricone bits. The difference between a premium oil field Tricone bit and non-premium oil well quality Tricone is
that the roller cones have high end sealed bearings; extremely high quality tungsten carbide and diamond gauge
O
protection throughout the drill bit as well as skirt tail hard facing and optimized hydraulics. These roller cone drill
L bits are designed to go to extreme depths in extreme conditions and in situations where they cannot fail.
S When ordering a bit the IADC bit classification system is a very useful tool and allows SYSVENCOL Drilling to
specify a bit that out performs your expectations.
The TCI Tricone Bit ranges in size from 3.875” (88.9mm) to 28” (711.2mm)
The Mill Tooth TriCone Bit ranges in size from 5” (127mm to 32” (812.8mm)
IADC TRICONE ROLLERCONE CLASSIFICATION SYSTEM

▮ 4 character code, first 3 characters are numbers, the last is a letter
▮ 1st number is the series. 1 to 3 represent a milled tooth tri cones, 4 – 8 represent TCI tri cones. The higher the
series number the harder more abrasive the rock formation is.
▮ 2nd number is the relative degree of hardness within a series. The number ranges from 1 – 4, the higher the
number the harder the formation
▮ 3rd number represents bearing design and gauge protection
 Open bearing
 Roller bearing air cooled
 Open bearing gauge protected
 Sealed roller bearing
 Sealed roller bearing gauge protected
 Sealed friction bearing
 Sealed friction bearing gauge protected
▮ 4th character is a letter and describes optional features. There are 16 alphabetic character’s, each representing
the Tricones most significant feature.
57
SYSVENCOL DRILLING TOOLS D

PDC DRILL BITS R
I
L
SYSVENCOL PDC DRILL BITS L
PDC stands for Polycrystalline Diamond Compact which refers to the cutters on these drill bits. PDC bits have I
exceptional rates of penetration when drilling and can out preform other bits in the right conditions. The diamond
cutters are 10 times stronger than steel but they are Brittle and can get damaged in discontinuous formations.
N
G
PDC bits love to drill through shale’s, salty clay stone, concrete and sands. Avoid gravel and sand stone.
PDC Bits can be constructed from steel bodies or matrix bodies. You will get deeper hole out of a Matrix Body but T
they cannot be repaired or re-tipped they may crack if the driller dynamically impacts the bit. A steel body PDC bit
O
is much tougher than a matrix body and will not crack. It will not drill quite as deep but it can be repaired and
retipped. O
L
When drilling with PDC bits it is important to know and follow instructions for the recommended weight on the
drill bit and to control the rotational speed.
S
Western drilling tools can supply PDC bits in sizes from 3.5” (88.9mm) to 12-1/4” (311.2 mm). Our PDC bits have
3 to 6 wings, Jet Nozzles and gauge protection.
Western Drilling tools also Builds PDC bits for RC drilling (reverse circulation drilling) applications.
58
A SYSVENCOL STAINLESS STEEL TUBING

D
D
I
T
I Our tubings can be manufactured seamless or
O welded, they are tested and inspected to meet
maximum strength and performance. All parts
N
are designed in accordance with the industry
A standards, based in ASME guidelines for low and
L High Pressure Piping.
Commonly our tubings are used in a wide variety

S of industries, including oil and gas, petrochemical,
power generation, semiconductor, food and beverage, marine
E and automotive due to its excellent general corrosion resistance,
R high strength-to-weight ratio, and remarkable ductility, stainless steel has become the predominant material choice
V in hydraulic and instrumentation applications within countless industries as the primary component of high-pressure
fluid systems.
I
C
E
FEATURES :
S ▮ Welded or seamless manufacturing
▮ Maximum performance for low and high pressure
▮ Versatility
▮ Variety of applications
▮ Corrosion resistance
▮ Alloys and sizes available upon request
59
SYSVENCOL CHEMICAL INJECTION SERVICES A

D
D
I
T
We offer the encapsulation of control lines to provide increased I
durability along with chemical and corrosion resistance. O
N
A
REFERENCE: L
▮ 5 = Excellent
▮ 1 = Poor
S
E
R
V
I
C
E
S
NOTE: Other Polymers and grades available upon request
CABLE PROTECTOR
The Cable Protector

provides a safe, quick and efficient way of conveying
and securing downhole cables into well-bores. Ideal for the
protection of any size ESP cables, control lines, umbilicals and encapsulated
bundles in well-bores. Eliminating compression-induced damage to downhole cables,
its slip and rotation resistant design is streamlined to help prevent hang-ups downhole.
.
CONTACTS
+1 786 571 9846

+58 291 3175912
[email protected]
[email protected]
SYSVENCOL C.A
GoldStar Group LLC
All rights reserved®, 2023

CATALOGUE_DILLING

Uploaded by

Copyright:

Available Formats

CATALOGUE_DILLING

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CATALOGUE_DILLING

Uploaded by

Copyright:

Available Formats

A GoldStar Group Company

PRODUCT CATALOG 2023

SYSVENCOL is a subsidiary of GoldStar SYSVENCOL is located in

SYSVENCOL provides a wide range of

HANGERS & PACKERS WELLBORE CLEANING TOOLS

RESERVOIR MONITORING DRILLING TOOLS

LINER PACKER “SPARK”

DYNAMIC SKID RINGS :

FE ATURES AND BENEFITS :

LINER HANGER SIZE CASING Liner

10-3/4" x 13-3/8" 13-3/8" 48# - 68# 10-3/4" 32# - 55,5#

SYSVENCOL LINER TOP HANGER PACKER

COIL TUBING & JOINTED PIPE

LINER HANGER SIZE CASING Liner

5" x 7" 7" 23# -38# 5" 11,5# - 18#

5- 1/2 " x 7" 7" 17# - 26# 5 - 1/2" 13# - 23#

6-5/8" x 8-5/8" 8-5/8" 24# - 32# 6-5/8" 17# - 32#

7" x 9-5/8" 9-5/8" 29# - 53,5# 7" 17# - 35#

8 - 5/8" x 11-3/4" 11-3/4" 42# - 54# 8-5/8" 24# - 49#

9-5/8" x 13-3/8" 13-3/8" 48# - 85# 9-5/8" 29,30# - 53,5#

10-3/4" x 13-3/8" 13-3/8" 48# - 68# 10-3/4" 32# - 55,5#

SYSVENCOL PATCH TOOL

DYNAST NG CUP TYPE TOOL

LINER HANGER SIZE CASING LINER

5" x 7" 7" 23# -38# 5" 11# - 18#

5- 1/2 " x 7 -1/2" 7" 17# - 26# 5 - 1/2" 13# - 23#

6-5/8" x 8-5/8" 8-5/8" 24# - 32# 6-5/8" 17# - 32#

7" x 9-5/8" 9-5/8" 29# - 53,5# 7" 17# - 35#

8 - 5/8" x 11-3/4" 11-3/4" 42# - 54# 8-5/8" 24# - 49#

9-5/8" x 13-3/8" 13-3/8" 48# - 85# 9-5/8" 29,30# - 53,5#

10-3/4" x 13-3/8" 13-3/8" 48# - 68# 10-3/4" 32# - 55,5#

FEED-THRU THERMAL CUP PACKER

FEATURES/BENEFITS PERFOMANCE SPECIFICATIONS

Connections 3-1/2” Hydril CS Pin x Box

Seal Elements Thermanite high perfomance

SYSVENCOL OPEN HOLE PACKER

S ▮ Anti-Extrusion barriers on element

Field dressable activation

Max Burst Collapse 10,000 psi

Temperature rating 250 °F

Open / cased Hole max 5,9”- 9”

Setting Pressure 2453 psi

Tensile 625,000 lbs

Torsional 10,000 ft-lbs

RELIEABLE THERMAL INSOLATION

FEATURES ID 3,88” 4,151” 4,77” 6,19”

HYDROSPARK WITH FEED-THRU

HYDROSOLACE WITH FEED-THRU

FEATURES AND BENEFITS

SYSVENCOL CASING PACKER

Our Casing Packer offers maximum adhesion for complete isolation

APPLICATIONS & BENEFITS:

Casing Size 4,5” (11,6 – 15,1#)

Max Burst Collapse 10,000 psi

Temperature rating 285 °F

Setting Pressure 4,000 psi

Tensile 90,000 lbs

Rotational Shear Max 1,600 ft-lbs

There are three basic configurations of the Sysvencol Tie-Back Nipple:

GS HD RETRIEVABLE PACKER LEFT-HAND AUTO S