PDS_M-2129

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product Information

Product M-2129

Description Scale and Corrosion Inhibitor for High Stress Cooling Water Systems

Benefits
 Controls scale, corrosion and sedimentation.
 Easily controlled liquid treatment.
 Halogen resistant.
 Maintains clean system.
 Does not promote bacterial growth.

Specification
Appearance : Yellow to Yellowish green Liquid
Specific Gravity : 1.23 – 1.33
pH of 1% solution : ≤2
Metito Hazard Category : D – Acidic
IMDG Class : 8 ; Corrosive
U.N. No. : 1760 ; Corrosive Liquid, N.O.S.

Application M-2129 has been designed to provide continuous scale and corrosion inhibition for open
recirculating cooling systems using make up water moderate to high levels of hardness
and moderate to high levels of suspended solids. M-2129 contains organic inhibitors and
new, high performance dispersants for the maintenance of clean heat transfer surfaces
for improved system efficiency.

M-2129 contains components that will remain active in the presence of chlorine and
other halogens therefore maintaining performance during routine chlorination for the
control of corrosion and deposit formation from within the system, thereby maximising
performance and eliminating un-scheduled downtime and reducing the risk of legionella.

Dosage rate will be dependent on the makeup water quality and system design. It is
recommended that addition is made in proportion to the makeup water usage. The exact
dosage rate and most efficient method of addition for a specific application will be
determined and monitored by your Metito Consultant as part of our expert consultancy
service.

It is recommended that this product is used as part of a complete cooling water


treatment program to control corrosion, scale fouling and biological contamination.

METITO Chemicals
Find your nearest office at www.metito.com
Rev. 1.2 Last updated 23rd March.2018 Page 1 of 2 PDS M-2129
Packaging M-2129 is available in 30 kg and 225 kg plastic containers.

Safety Products in this category are acidic and corrosive to body tissue and must be handled
with great care. Skin and eye contact must be avoided and gloves and goggles should be
worn, along with protective overalls and apron when handling the products or solutions
containing the products.
Do not store with Alkalis such as Category B (Alkali) and C (Highly Alkaline) products or
oxidising agents such as Category I (Oxidising) or J (Halogen Donor / Oxidising) materials.
GENERAL SAFETY INSTRUCTIONS
Ensure that the operator is fully informed and familiar with the use of the product.
Avoid ingestion of the product by mouth and nose. To eliminate the possibility of
accidental ingestion, operator should never eat, drink or smoke when using chemicals. In
addition, protective clothing should be removed, and the hands washed prior to eating,
drinking or smoking.
Store in the original containers and ensure that the cap is always secure.
Do not store in temperatures above 40ºC or below 0ºC for extended periods.
Do not stack more than two high for prolonged periods.
Avoid storing near direct heat and in direct sunlight.
Store out of the reach of children and away from thoroughfares.
Please refer to the Material Safety Data Sheet for more detailed information.

METITO Chemicals
Find your nearest office at www.metito.com
Rev. 1.2 Last updated 23rd March.2018 Page 2 of 2 PDS M-2129

You might also like