SD350 | 12.

9L | 350 kW
INDUSTRIAL DIESEL GENERATOR SET
EPA Certified Stationary Emergency

Standby Power Rating

350 kW, 438 kVA, 60 Hz

Prime Power Rating*

315 kW, 394 kVA, 60 Hz

*EPA Certified Prime ratings are not available in the US or its Territories Image used for illustration purposes only

Codes and Standards Powering Ahead

Not all codes and standards apply to all configurations. Contact
factory for details. For over 60 years, Generac has provided innovative design and
superior manufacturing.
UL2200, UL6200, UL1236, UL489,
UL142 Generac ensures superior quality by designing and manufacturing
most of its generator components, including alternators, enclosures
CSA C22.2, ULC S601 and base tanks, control systems and communications software.

Generac gensets utilize a wide variety of options, configurations and

BS5514 and DIN 6271
TM

arrangements, allowing us to meet the standby power needs of

practically every application.
SAE J1349
®
Generac searched globally to ensure the most reliable engines power
our generators. We choose only engines that have already been
NFPA 37, 70, 99, 110 proven in heavy-duty industrial applications under adverse
conditions.
®
NEC700, 701, 702, 708 Generac is committed to ensuring our customers’ service support
continues after their generator purchase.

ISO 3046, 7637, 8528, 9001

NEMA ICS10, MG1, 250, ICS6, AB1

SPEC SHEET

ANSI C62.41

IBC 2009, CBC 2010, IBC 2012,

ASCE 7-05, ASCE 7-10, ICC-ES AC-
156 (2012) 1 of 6
SD350 | 12.9L | 350 kW
INDUSTRIAL DIESEL GENERATOR SET
EPA Certified Stationary Emergency

STANDARD FEATURES

ENGINE SYSTEM ALTERNATOR SYSTEM ENCLOSURE (If Selected)

• Oil Drain Extension • UL2200 GENprotect™ • Rust-Proof Fasteners with Nylon Washers
• Air Cleaner • Class H Insulation Material to Protect Finish
• Level 1 Fan and Belt Guards (Open Set Only) • Vented Rotor • High Performance Sound-Absorbing Material
(Sound Attenuated Enclosures)
• Stainless Steel Flexible Exhaust Connection • 2/3 Pitch
• Gasketed Doors
• Critical Silencer (Enclosed Units Only) • Skewed Stator
• Upward Facing Discharge Hoods (Radiator
• Factory Filled Oil and Coolant • Amortisseur Winding and Exhaust)
• Radiator Duct Adapter (Open Set Only) • Permanent Magnet Excitation • Stainless Steel Lift Off Door Hinges
• Engine Coolant Heater • Sealed Bearing • Stainless Steel Lockable Handles
• Full Load Capacity Alternator • RhinoCoat™ - Textured Polyester Powder Coat Paint
Fuel System • Protective Thermal Switch
• Secondary Fuel Filter FUEL TANKS (If Selected)
• Fuel Lockoff Solenoid GENERATOR SET
• UL 142/ULC S601
• Internal Genset Vibration Isolation • Double Wall
Cooling System • Separation of Circuits - High/Low Voltage • Vents
• Closed Coolant Recovery System • Separation of Circuits - Multiple Breakers • Sloped Top
• UV/Ozone Resistant Hoses • Wrapped Exhaust Piping • Sloped Bottom
• Factory-Installed Radiator • Standard Factory Testing • Factory Pressure Tested (2 psi)
• 50/50 Ethylene Glycol Antifreeze • 2 Year Limited Warranty (Standby Rated Units) • Rupture Basin Alarm
• Radiator Drain Extension • Silencer Mounted in the Discharge Hood • Fuel Level
(Enclosed Units Only)
• Check Valve in Supply and Return Lines
Electrical System • RhinoCoat™ - Textured Polyester Powder Coat Paint
• Battery Charging Alternator • Stainless Steel Hardware
• Battery Cables
• Battery Tray
• Rubber-Booted Engine Electrical Connections
• Solenoid Activated Starter Motor

CONTROL SYSTEM • Auto/Off/Manual Switch Alarms and Warnings

• E-Stop (Red Mushroom-Type) • Oil Pressure
• NFPA110 Level I and II (Programmable) • Coolant Temperature
EMERGENCY
STOP • Customizable Alarms, Warnings, and Events • Coolant Level
• Modbus® Protocol • Engine Overspeed
•
Phase A–B B–C C–A SD EMERGENCY STOP Hi

Predictive Maintenance Algorithm •

Volts 0 0 0 SD COOLANT LEVEL Lo

Battery Voltage
Amps 0 0 0 Wr*BATTERY VOLTS Hi
Hz = 0.0 kW = 0 ACK More (1–3) COMMON ALARM

• Sealed Boards • Alarms and Warnings Time and Date Stamped

• •
NOT IN

Password Parameter Adjustment Protection

AUTO

Snap Shots of Key Operation Parameters During

MENU

®
AUTO OFF MAN.

•
HOME

ENTER Single Point Ground Alarms and Warnings

• •
ALARM

16 Channel Remote Trending Alarms and Warnings Spelled Out (No Alarm Codes)
• 0.2 msec High Speed Remote Trending
• Alarm Information Automatically Annunciated
Digital H Control Panel- Dual 4x20 Display on the Display

Full System Status Display

Program Functions
• Programmable Crank Limiter
• Power Output (kW)
• 7-Day Programmable Exerciser
• Power Factor
• Special Applications Programmable Logic Controller
• kW Hours, Total, and Last Run
• • Real/Reactive/Apparent Power
SPEC SHEET

RS-232/485 Communications
• All Phase Sensing Digital Voltage Regulator
• All Phase AC Voltage
• 2-Wire Start Capability
• All Phase Currents
• Date/Time Fault History (Event Log)
• Oil Pressure
• Isochronous Governor Control
• Coolant Temperature
• Waterproof/Sealed Connectors
• Coolant Level
• Audible Alarms and Shutdowns
• Engine Speed
• Not in Auto (Flashing Light)
• Battery Voltage 2 of 6
• Frequency
SD350 | 12.9L | 350 kW
INDUSTRIAL DIESEL GENERATOR SET
EPA Certified Stationary Emergency

CONFIGURABLE OPTIONS

ENGINE SYSTEM GENERATOR SET CONTROL SYSTEM

○ Level 1 Fan and Belt Guards (Enclosed Units Only) ○ 12 Position Load Center ○ NFPA 110 Compliant 21-Light Remote Annunciator
○ Radiator Stone Guard (Open Set Only) ○ Extended Factory Testing ○ Remote Relay Assembly (8 or 16)
○ Shipped Loose Critical Silencer Flange (Open ○ Ground Fault Annunciator
Set Only) ENCLOSURE ○ 10A Engine Run Relay
○ Heavy Duty Air Cleaner ○ Remote E-Stop (Break Glass-Type, Surface Mount)
○ ○ Weather Protected Enclosure
Oil Heater
○ ○ Remote E-Stop (Red Mushroom-Type,
○ Air Filter Restriction Indicator Level 1 Sound Attenuated Surface Mount)
○ Critical Silencer Flange - Shipped Loose (Open ○ Level 2 Sound Attenuated ○ Remote E-Stop (Red Mushroom-Type, Flush Mount)
Set Only) ○ Level 2 Sound Attenuated with Motorized Dampers ○ Remote Communication - Modem
○ Radiator Stone Guard (Open Set Only) ○ Steel Enclosure ○ 100 dB Alarm Horn
○ Aluminum Enclosure ○ 120V GFCI and 240V Outlets
ELECTRICAL SYSTEM ○ IBC Seismic Certification ○ Damper Alarm Contacts (with Motorized
○ 10A UL Listed Battery Charger
○ Up to 200 MPH Wind Load Rating (Contact Factory Dampers Only)
for Availability)
○ Battery Warmer ○ AC/DC Enclosure Lighting Kit WARRANTY
○ Enclosure Heater (with Motorized Dampers)
ALTERNATOR SYSTEM ○ 2 Year Extended Limited Warranty
○ Alternator Upsizing FUEL TANKS (Size on Last Page) ○ 5 Year Limited Warranty

○ ○ 5 Year Extended Limited Warranty

Anti-Condensation Heater ○ Emergency Venting ○ 7 Year Extended Limited Warranty
○ Tropical Coating ○ 8 in (203.2 mm) Fill Extension ○ 10 Year Extended Limited Warranty
○ 13 in (330.2 mm) Fill Extension
CIRCUIT BREAKER OPTIONS ○ 19 in (482.6 mm) Fill Extension
○ Main Line Circuit Breaker
○ 2nd Main Line Circuit Breaker
○ Shunt Trip and Auxiliary Contact
○ Electronic Trip Breakers

ENGINEERED OPTIONS

ENGINE SYSTEM GENERATOR SET FUEL TANKS

○ Fluid Containment Pan ○ Special Testing ○ Overfill Protection Valve
○ Coolant Heater Ball Valves ○ Battery Box ○ UL 2085 Tank
○ Stainless Steel Tank
ALTERNATOR SYSTEM ENCLOSURE ○ Special Fuel Tanks

○ 3rd Breaker Systems ○ Door Open Alarm Switch

○ Vent Extensions
○ 5 Gallon Spill Containment Box

CONTROL SYSTEM
○ Dealer Supplied AHJ Requirements

○ Spare Inputs (x4) / Outputs (x4)

SPEC SHEET

3 of 6
SD350 | 12.9L | 350 kW
INDUSTRIAL DIESEL GENERATOR SET
EPA Certified Stationary Emergency

APPLICATION AND ENGINEERING DATA

ENGINE SPECIFICATIONS

General Cooling System

Make Iveco/FPT Cooling System Type Closed Recovery

EPA Emissions Compliance Stationary Emergency Fan Type Pusher
EPA Emissions Reference See Emissions Data Sheet Fan Speed - RPM 2,466
Cylinder # 6 Fan Diameter - in (mm) 30 (762)
Type In-Line
Displacement - in3 (L) 787.2 (12.9) Fuel System
Bore - in (mm) 5.3 (134.6)
Fuel Type Ultra Low Sulfur Diesel #2
Stroke - in (mm) 5.9 (149.9)
Carburetor ASTM
Compression Ratio 16.5:1
Fuel Filtering (Microns) 5
Intake Air Method Turbocharged/Aftercooled
Fuel Inject Pump Electronic
Cylinder Head Type 4-Valve
Fuel Pump Type Engine Driven Gear
Piston Type Aluminum
Injector Type Electronic
Crankshaft Type Dropped Forged Steel
Engine Type Pre-Combustion
Fuel Supply Line - in (mm) 0.5 (12.7) NPT
Engine Governing
Fuel Return Line - in (mm) 0.5 (12.7) NPT
Governor Electronic Isochronous
Frequency Regulation (Steady State) ±0.25%
Engine Electrical System
Lubrication System System Voltage 24 VDC
Battery Charger Alternator Standard
Oil Pump Type Gear
Battery Size See Battery Index 0161970SBY
Oil Filter Type Full Flow
Battery Voltage (2) - 12 VDC
Crankcase Capacity - qt (L) 36.9 (35)
Ground Polarity Negative

ALTERNATOR SPECIFICATIONS

Standard Model K0400124Y21 Standard Excitation Permanent Magnet

Poles 4 Bearings Single - Pre-Lubed and Sealed
Field Type Revolving Coupling Direct via Flexible Disc
Insulation Class - Rotor H Load Capacity- Standby 100%
Insulation Class - Stator H Prototype Short Circuit Test Yes
Total Harmonic Distortion <5% Voltage Regulator Type Full Digital
SPEC SHEET

Telephone Interference Factor (TIF) <50 Number of Sensed Phases All

Regulation Accuracy (Steady State) ±0.25%

4 of 6
SD350 | 12.9L | 350 kW
INDUSTRIAL DIESEL GENERATOR SET
EPA Certified Stationary Emergency

OPERATING DATA

POWER RATINGS

Standby
Three-Phase 120/208 VAC @0.8pf 350 kW Amps: 1,214
Three-Phase 120/240 VAC @0.8pf 350 kW Amps: 1,053
Three-Phase 277/480 VAC @0.8pf 350 kW Amps: 526
Three-Phase 346/600 VAC @0.8pf 350 kW Amps: 421

MOTOR STARTING CAPABILITIES (skVA)

skVA vs. Voltage Dip

277/480 VAC 30% 208/240 VAC 30%
K0400124Y21 953 K0400124Y23 810
K0400124Y23 1,060 K0500124Y23 730
K0500124Y23 1,020 K0600124Y23 1,120

FUEL CONSUMPTION RATES*

Diesel - gph (Lph)

Fuel Pump Lift - ft (m) Percent Load Standby
3 (1) 25% 8.4 (31.8)
50% 14.5 (54.9)
Total Fuel Pump Flow (Combustion + Return) gph (Lph) 75% 20.1 (76.1)
31 (117) 100% 25.3 (95.8)
* Fuel supply installation must accommodate fuel consumption
rates at 100% load.

COOLING

Standby
Coolant Flow gpm (Lpm) 145 (552)
Heat Rejection to Coolant BTU/hr (kW) 792,960 (232)
Inlet Air cfm (m3/min) 19,070 (539.7)
Maximum Operating Radiator Air Temperature °F (°C) 122 (50)
Maximum Ambient Temperature (Before Derate) See Bulletin No. 0199280SSD
Coolant System Capacity gal (L) 13 (49.2)
Maximum Additional Radiator Backpressure in H2O (kPa) 0.5 (0.12)

COMBUSTION AIR REQUIREMENTS

Standby
Flow at Rated Power - cfm (m3/min) 1,195 (33.8)

ENGINE EXHAUST
Standby Standby
Rated Engine Speed RPM 1,800 Exhaust Flow (Rated Output) cfm (m3/min) 2,988 (84.6)
SPEC SHEET

Maximum Allowable Exhaust Backpressure

Horsepower at Rated kW** hp 530 inHg (kPa) 1.5 (5.1)
(Post Silencer)
Piston Speed ft/min (m/min) 1,770 (540) Exhaust Temperature (Rated Output - Post Turbo) °F (°C) 1,076 (580)
BMEP psi (kPa) 313 (2,158)
** Refer to “Emissions Data Sheet” for maximum bHP for EPA and SCAQMD permitting purposes.

Deration – Operational characteristics consider maximum ambient conditions. Derate factors may apply under atypical site conditions.
Please contact a Generac Power Systems Industrial Dealer for additional details. All performance ratings in accordance with ISO3046, BS5514, ISO8528, and DIN6271 standards. 5 of 6
Standby - See Bulletin 10000018933
Prime - See Bulletin 10000018926
SD350 | 12.9L | 350 kW
INDUSTRIAL DIESEL GENERATOR SET
EPA Certified Stationary Emergency

DIMENSIONS AND WEIGHTS*

OPEN SET
Usable
Run Time
Capacity L x W x H - in (mm) Weight - lbs (kg)
H Hours
- Gal (L)
No Tank - 137.5 (3,493) x 57.6 (1,463) x 67.8 (1,722) 5,377 - 7,330 (2,439 - 3,325)
7 183 (693) 137.5 (3,493) x 57.6 (1,463) x 80.8 (2,052) 6,325 - 8,278 (2,869 - 3,755)

L W 17 438 (1,658) 137.5 (3,493) x 57.6 (1,463) x 92.8 (2,357) 6,637 - 8,590 (3,011 - 3,897)
27 693 (2,623) 137.5 (3,493) x 57.6 (1,463) x 104.8 (2,662) 6,973 - 8,926 (3,163 - 4,049)
37 946 (3,581) 208.3 (5,292) x 57.6 (1,463) x 108.8 (2,762) 8,402 - 10,335 (3,811 - 4,697)
52 1,325 (5,016) 277.8 (7,055) x 57.6 (1,463) x 107.2 (2,722) 9,417 - 11,370 (4,272 - 5,158)

WEATHER PROTECTED ENCLOSURE

Usable
Run Time
Capacity L x W x H - in (mm) Weight (Enclosure Only)
- Hours
- Gal (L) - lbs (kg)
H
No Tank - 174.7 (4,437) x 57.7 (1,460) x 77.8 (1,977)
7 183 (693) 174.7 (4,437) x 57.7 (1,460) x 90.8 (2,307)
17 438 (1,658) 174.7 (4,437) x 57.7 (1,460) x 102.8 (2,612) Steel: 1,532 (695)
27 693 (2,623) 174.7 (4,437) x 57.7 (1,460) x 114.8 (2,917) Aluminum: 732 (334)
L W
37 946 (3,581) 208.0 (5,283) x 57.7 (1,460) x 132.0 (3,355)
52 1,325 (5,016) 278.0 (7,061) x 57.7 (1,460) x 131.0 (3,327)

LEVEL 1 SOUND ATTENUATED ENCLOSURE

Usable
Run Time
Capacity L x W x H - in (mm) Weight (Enclosure Only)
- Hours
- Gal (L) - lbs (kg)
H
No Tank - 200.2 (5,084) x 57.5 (1,460) x 90.8 (2,306)
7 183 (693) 200.2 (5,084) x 57.5 (1,460) x 90.8 (2,306)
17 438 (1,658) 200.2 (5,084) x 57.5 (1,460) x 102.8 (2,611) Steel: 1,995 (905)
27 693 (2,623) 200.2 (5,084) x 57.5 (1,460) x 114.8 (2,916) Aluminum: 935 (425)
L W
37 946 (3,581) 208.3 (5,292) x 57.5 (1,460) x 118.8 (3,016)
52 1,325 (5,016) 277.8 (7,055) x 57.5 (1,460) x 117.2 (2,976)

LEVEL 2 SOUND ATTENUATED ENCLOSURE

Usable
Run Time
Capacity L x W x H - in (mm) Weight (Enclosure Only)
- Hours
- Gal (L) - lbs (kg)
H
No Tank - 180.6 (4,588) x 57.5 (1,460) x 107.3 (2,725)
7 183 (693) 180.6 (4,588) x 57.5 (1,460) x 120.3 (3,055)
17 438 (1,658) 180.6 (4,588) x 57.5 (1,460) x 132.3 (3,360) Steel: 2,568 (1,165)
27 693 (2,623) 180.6 (4,588) x 57.5 (1,460) x 144.3 (3,665) Aluminum: 1,184 (537)

37 946 (3,581) 208.3 (5,292) x 57.5 (1,460) x 148.3 (3,765)

L W
52 1,325 (5,016) 277.8 (7,055) x 57.5 (1,460) x 146.7 (3,725)

SPEC SHEET

* All measurements are approximate and for estimation purposes only. Specification characteristics may change without notice. Please contact a Generac Power Systems Industrial Dealer for detailed
installation drawings.
6 of 6

Generac Power Systems, Inc. | P.O.Box 8 | Waukesha, WI 53189 Part No. 0184860SBY
P: (262) 544-4811 ©2020 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Rev. M 09/22/2020