Mediclinics Hand Dryer M02A C CS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HAND DRYERS

SENSOR OPERATED Mediflow Logic Dry M02A

M02A M02AB M02AC M02ACS


General description Technical Specifications

 Mediflow® Logic Dry hand dryers automatically Voltage 220- 240 V


operated are characterized by their power and
ruggedness. They incorporate the technology to Frequency 50/60 Hz
automatically regulate the temperature of the outlet air Electrical Isolation Class II
to 4 possible levels depending on the room
temperature. Thanks to this device, which is
Total power 250 – 2,750 W
assembled into the LED Electronic Circuit, these Consumption 1.2 - 12A
dryers enjoy a longer life cycle, while increasing the
Motor power 250 W
effectiveness of the hand drying process. Also relevant
is the savings in electrical energy consumption of Rpm 4,500
these dryers, which incorporate this very important
Heating element power 2,500 W
ecologic feature.
 Mediflow® Logic Dry dryers are made according to the
Dimensions 325x275x164 mm.
highest quality and safety standards: it includes safety Weight 4.25 Kg
thermal limiters (in the heating element and in the
Cover thickness 1.5 mm
motor) and automatic disconnect system.
 Mediflow® solutions are proven long lasting and
Drying time 29 sec.
completely reliable models. Versatile hand dryers with 3
Effective airflow 450 m /h (7,500 L/min)
anti-vandalism features and designed to be installed in
areas with a large traffic of people such as: airports, Air velocity 95 Km/h
large hotels, sports centers, large recreational areas O
Air temperature (10 cm 50 C
and official organizations among others. distance/21ºC)
Components & materials: (*)
Sound pressure (at 2m) 65 dBA
 M02A: Steel one-piece cover, white Epoxy painted, Protection rating IP23
1.5 mm. thick. (*) According to UNE EN ISO 11201:2010 V2 standard.
 M02AB: Steel one-piece cover, black mate Epoxy
painted, 1.5 mm. thick. Dimensions

 M02AC: Stainless steel one-piece cover, bright finish,


1.5 mm. thick.
 M02ACS: Stainless steel one-piece cover, satin finish,
1.5 mm. thick.
 Fire resistant plastic PA 6 -V0 base and fan scroll, with
4 Ø 8 mm holes for wall mounting. It includes silent-
blocks to damp mechanical vibrations.
 Universal brush motor, 4,500 rpm, F class, which
includes a safety thermal cut-off.
 Aluminium centrifugal double asymmetrical inlet fan
wheel.
 Waved wire NiCr heating element on a mica frame that
incorporates a thermal cut-off.
 Automatic regulation of air temperature on ambient
temperature.
 Fully adjustable (5-25 cm) IR electronic detection
sensor by means of a potentiometer.
Dim. ± 4%
 Selective detection of fixed targets and automatic
disconnection system after 120 seconds of continuous
use.
Operation

Place the hands under the air outlet. The dryer will start automatically, and go on with no interruption as long as the
hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the
airflow or after 120 seconds of continuous use.

Mounting Recommended heights distance from the floor

Certificates & Qualifications

Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without prior notice.
Revision 10-16 © mediclinics S.A.

You might also like