Scribd
Upload
31 views4 pages

Remote LED Control and Status Monitoring Experiment: CUCI2553 IOT Analytics

Uploaded by

aashrithsai7.dkm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views4 pages

Remote LED Control and Status Monitoring Experiment: CUCI2553 IOT Analytics

Uploaded by

aashrithsai7.dkm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

IOT Analytics CUCI2553

Remote LED Control and Status Monitoring Experiment


1 LED 1
2 Microcontroller (Arduino or ESP8266/ESP32) 1
For setting up
3 Breadboard and Jumper Wires the circuit 1 set
4 Internet Connection connections
5 Node MCU
6 Blynk App
7 Resistor
220Ω
1

1) Set Up the LED Circuit


 Connect the LED to a digital output pin (e.g., GPIO2) of the ESP8266/ESP32, with a 220Ω resistor in
series to limit the current.
2) Install the Blynk Library
 In the Arduino IDE, install the Blynk library from the Library Manager for easy integration with the Blynk
IoT platform.
3) Configure the Blynk App
 Open the Blynk app on your smartphone and create a new project.
 Select the appropriate microcontroller (ESP8266 or ESP32) as the hardware model.
 Add a button widget to control the LED and link it to the virtual pin configured in your code.
 Note down the authentication token generated by Blynk for this project.
4) Program the Microcontroller
 Write a program in the Arduino IDE to control the LED based on Blynk commands.
 Include the Blynk authentication token, Wi-Fi credentials, and define the digital output pin for the LED.
5) Run and Test
 Open the Blynk app, connect the project, and press the button widget to turn the LED on and off.
Safety Precaution

 Ensure the circuit is properly connected before powering on to avoid short circuits.

 Handle the microcontroller and relay module with care to avoid damaging components

or causing accidental electrical shorts.

 Disconnect power before making any adjustments to the circuit.

Application & Inference

 Application: This experiment demonstrates practical IoT applications, such as remotely

controlling devices (like lights or appliances) and monitoring their status. This can be

appliedto smart home systems, energy management, and automated building control.

 Inference: IoT platforms provide efficient remote control and monitoring capabilities,

enabling real-time management of connected devices, which is crucial for automation

and analytics in IoT-based applications.

You might also like