Standard Features:

All f<U Kn UNIBODY (Reduced Port)ballvalvesaredesigned,

constructed
andtestedstrictlyin
accordancewiththe latestinternational
standardsof APl.ASME.BSandDlN.
Figure1
1. Body (1) & Retainer(2) are castedand manufactured"in-house";suppliedin carbonsteel and austeniticstainlesssteel.
These materialsare in compliancewith NACEstandardMR 0175 sDecifications.
SDecialmaterialsare availableuDonreouest.
3. Precisionmachinedballs to 4RMS finish providesuperiorqualitywith low torque and zero leakage
4. Blow-outProofStem - Parallelflat stem drive.
5. Anti-StaticDesign(855351).
6. MountingPad - Integral"lSO" mountingpad with stop positionsthat can be padlocked.
7. PackingGland - Heavycast gland/ mountingpad provideslactory pre-loadof packing.
8. StuffingBox Cavity- Extradeep, machined-finishedstuflingbox.
9. Cavity RelievingSeat - The seat designallowsexcessivecavity pressureto be relievedwith no seat deflection.
10. Pad Bearing
11. Stem Seal Retainer- Double(internal/external)
Viton O-Ringsealed.
12.ConicalDiscSpring(s)- Optional"live-load" packingdesign.
13. Packing- Die{ormed,flexible,graphiteringsassureintegrityof seal at elevatedtemperatures.
14.ThrustWasher
'15.ThrustBearing
'I6. Gland/StopperBolt
'17.Lever

@ xun KANG vALvE MFG.co.,LTD

 ANDSTEM
MOUNTING 2)
SEAIDESIGN(Figure
Actuotor Mounting(lSO-5211)
AIIKUKA flangedend productsshallhavean integrally
cast (lSO)actuatormountingpad.This featureprovides
for directmountof gear operatorsor actuators.The
additionalcost for a separatemountingbracketis
ellminated

Live-Lood Slem Seql

T h i s o p t i o n p r o v i d e sp r e m i e rv a l v e s t e m s e a l i n g
characteristicsfor adverseconditionsof extreme
pressure/Temperature variations.Designedto meet
the moststringentfugitiveemissionsregulations, the
KUKA"live-load"designis comprisedof an extradeep
stuffingbox / packing7 stem seal retainerand coniEi
disc spring(s).Thedisc spring(s)providecontlnuous
compression of the packingassemblyand compensate
for wear,the staticsealedretainer,with two(2) tertiaryO
-Ringseals,eliminates stemgalling.Thisuniquedesign
lowersrequiredvalvestemtorqueand increasesproduct
performance underall operatingconditions.
(u.s. PATENTPENDINGSERIALNO. 081967,620)

MetaltoMetal
KUKA'S DOUBLE
UNIQUE DESIGN
SEALING
ANDMETALTO METAL
CONTACT(Figwe3)
The PTFE Gasketacts as the primaryseal for KUKA
Unibodyball valves.The secondaryseal is made of
f l e x i b l eg r a p h i t e ;a m a t e r i a lw i t h e x t r e m e l yg o o d
resistanceto fire conditions. Graphite
Gasket
(Secondary
Seal)

Figure3

KUrf, KANG vALvE rtFG.co.,LTo @

 ReducedPort Construction:
Unibody,reducedport,free floatingball,"fire-safe"designed
to API-607*, blow-outproof stem, cavity relievingseats,
anti-staticdesign,pressurebalancehole in balland locking
device.Designedaccording to API-6D,ASME B 16.34and
855351specifications.
Note:Manufacturedand conformsto NACEstandardMR 0175
- API-607"fire-safe"
testedand certified.1 12"lhru 10"size.

Dimensions
Face to Face ASMEB 16.10& API 6D ShortPattern
End Flange A S M E8 1 6 . 5
Min.Port API6D
M i n .W a l l T h i c k . ASMEB 16.34& BS 5351

Size8-10 inch Size4-10 inch

Closs150/300
1l2' 3/4" 1" 1 1/2" 2" 3" 4" 6" 8u 10"
Valve Size
1Smm 20mm 25mm 40mm 50mm 80mm 100mm 150mm 200mm 250mm
inch 0.39/ 0.59 0.55/ 0.79 0.79/ 0.98 1 . 1 8 1
/ . 5 0 1 . 5 0| 2 . 0 1 2 . 3 6t 2 . 9 9 2 . 9 9t 3 . 9 4 3.94/ 5.98 5.71I 7.99 7.36/10.00
adladl mm 1 0 t 1 5 1 4 t 2 0 2 0 t 2 5 30/38 38/51 60/76 76 I 100 100 | 152 145 I 203 187 I 254
inch 4.25 4.6'1 5.00 6.50 7 . 0 1 7.99 9.02 10.51 1 1. 5 0 12.99
150
L mm 108 117 127 165 178 203 229 267 292 330
(RF) inch 5.51 5.98 6.50 7.52 8.50 11.14 12.01 15.87 16.50
300 17.99
mm 140 152 165 191 216 283 305 403 419 457
inch 0.79 0.87 1.22 1.89 2.01 4.49 5.75 6.46 8.90 10.08
h mm 20 22 31 48 51 114 146 164 226 256
inc h 3.07 3.15 3.86 4.65 5.24 6.14 7.64 8.23 11.22 11.73
H mm 78 80 98 118 133 156 194 209 285 298
inch 6.02 6.02 8.66 9.84 9.84 9.84 1378 18.11 31.50 39.37
W1 mm 153 153 220 250 250 250 350 460 800 1000
inch N/A N/A N/A N/A N/A N/A 11.81 11.81 15.75 19.69
w2 mm N/A N/A N/A N/A N/A N/A 300 300 400 500
Lb 4 6 7 13 20 35 61 110 183 353
150
Approx. kg 1.6 2.5 3 6 I 16 27.5 50 83 160
Weight
Lb 6 10 11 9 26 52 86 143 309 463
300
kg 2.5 4.2 4.8 8.6 11.5 23.5 39 65 140 210
Gearoperatorsare availablefor mostsizes.

@ xum KANG vALvE MFG.co.,LTD

 MATERIAL
STANDARD FORMODEL#CAAI5/#CAA3O
SPECIFICATIONS (ACC.TO ASTM)

CARBONSTEEL LOW-TEMP.CARBONSTEEL
PARTNAME STAINLESSSTEEL
NORMAL SOUR NORMAL I SOUR
BODY
A216Gr.WCB A352Gr. LCC A351Gr. CFBM
RETAINER
BALL 4351 Gr. CFBM
STEM A276TYPE316
SEAT RTFE
PACKING GRAPHITE
GASKET PTFEI GRAPHITE/ SW(316+GRAPHITE)
ISO PAD A 2 1 6G r .W C B 4352 Gr. LCC A351Gr. CF8
STEMSEALRETAINER A276TYPE316
O - RING VITON
STOPPER 4283 Gr. D A24OTYPE304
BEARING PTFE
BOLT 4193 Gr. 87 I A193Gr. B7M 4320 Gr. L7 | 4320 Gr. L7M A 1 9 3G r .8 8
LEVER DUCTILECASTIRON
GEAROPERATOR CASTIRONCASE.DUCTILEIRONGEAR,HIGHCARBONSTEELWORM

ISO52ll MOUMINGPADFORACTUATOR (UNrr:mm,

SELECTION N-m)
r s o5 2 1 1 +O.2 0 0
MOUNTING +0.1 -0.1 -0.1 APPROX. CA

@l D 1 @ l D 2 a l D 3 N-oh h1 T alD4 S1 H
PAD
NO TORAUE
Mu. 150 300

F05 125 o3 50 35 4-7 3.5 7 19.8 12 13 z z

/---r--'\---r
I F07 250 an 70 55 4-9 3.5 12 20 14 23 3 J

f_
f -Ji 6 l i l t l i l t r

F10 500 125 102 70 4-11 3.5 15 30 20 30 4 , 6 4 , 6

n i l

aD1 F12 1,000 150 125 85 4- 14 3.5 18 40 30 50 8,10 I

See attached sheet on this disc for the
F 1 4 2,000 175 1 updated
40 1 0 0mounting
4-18 4pad
. 5 information.
20 50 36 b3 10"

N.oh (Cv) FORMODEL#CAA|S #CAA30

FLOWCOEFFICIENT
VALVESIZE 112" 314' 1 1 112" 2" 3" 4u 6' 8" 10"

Cv 8.5 15 32 B3 120 311 535 1125 1908 3277

Cv = FLow rNu.s. cALLoNS/MINUTE

oF 60'FwATER
AT 1 PSIPRESSURE DROP

API 6D TEST
CLASS 150# Hydrostatic 300# Hydrostatic SEAT TEST Duration(minutes)
(Air)
SHELL SEAT S H E L L SEAT Type ll SHELL SEAT SEAT
w.P W.P
pstg psig kS/o,f pstg ks/0n psig pslg ks/dt' pstg kS/o'i pstg kS/o'f SIZE
MATERIAL\ ( Hydrostatic) (Air)

A1OsMCB 285 450 3 1. 7 325 2 2 . 9 7 4 0 1 124 7 9 825 5 8 . 1

ILF2
1t2"-4" 2 2 2
LCC 290 4 5 0 3 1 . 7 325 2 2 . 9 7 5 0 1 1 2 ! 7 9 . 2 825 5 8 . 1
80.8 5 . 6 9
I I

LCB zo3 4 0 0 28.1 3 0 0 2 1 . 1 6 9 5 10 5 ( 7 3 . 9 7 7 5 RA R

1 0 . 3 0.72
6"-10" 5
F3't6/CF3M
2 7 5 4 2 5 2 5 . 9 325 2 2 . 9 720 1 1 0 ( 7 7 . 4 8 0 0 5 6 . 3
/cF8/CF8M

KUM KANG vALvE MFG.co.,LTo @

PRESSURE/TEMPERATURE
RATTNGS
FORMODEL#CAAI5/#CAA30
ReducedPort 112"-1" ReducedPort1 112"-3"
800 800
700 700
oe 600 A 600
(L
' 500 CLASS , 500
uJ tIJ
300
5 4oo BODY $ +oo
3 soo a
(/)
LIJ
300
I.JJ

ff zoo CLASS ff zoo

100 150 100
0 BODY 0
-51 -20 392 500 -51 -20 392 500

100 200 300 400 32 100 200 300 400 500 600
T E M P E R A T U R- E
"F T E M P E R A T U R- 'EF

ReducedPortB"-10"
800
700
cD 600
' 500
IJJ

$ +oo
a
(/) 300
Ut
ff zoo
100
0
-51 -20 392 500 -51 -20 392 500

32 100 200 300 400 500 600 32 100 200 300 400 500 600
- "F
TEMPERATURE - "F
TEMPERATURE

THE DOTTEDLINESINDICATE
WORKINGPRESSURES FORCASTSTATNLESS STEELBOD|ES.(ASTM4351-CF8M)
THE OPERATINGTEMPERATUREOF THE VALVESIS LIMITEDBY THE MATERIAL
OF SEATAND SEAL.

TORQUE
DATAFORMODEL#CAAI5/#CAA30
8850 1000
7965 900
7080 800
6 19 5 7nn

5 3 10 600
442s 500
3540 400
t.lJ

a 265s
(r
300 8"

o 1770 200

f, rsze
I.JJ
150 o
885 100 4'
S
443 50
354 40 z'
266 30 1 112"
177 20
88.5 10 1'
314"
112'
5 10 15 20
BARS
73 145 218 290 435 580 7
PSlc
D I F F E R E N T I APLR E S S U R E
SEATMATERIAL; REINFORCED
P.T.F.E
TO SELECTTHE ACTUATOR,
ADDING25% SAFETYFACTORTO THE REQUIRED
TORQUESHOULDBE CONSIDERED.
 Figure1

Stondold Feolures:
All I(UKA SPLITBODYFull& ReducedPortballvalvesaredesigned,constructed andtestedstrictly
ina@ordance standardsof APl,ASME BS and DlN.
withthe labst international
FigureI 'in-house';suppliedin ca6on steelandaustenitic
1. Body(1)& Cap(2)arecastedand manufactured stainlesssteel.
Thes€materialsarein compliance withNACEstandardMR0175.
areavailableuponrequest.
Specialmat€rials
3. Bodyconstructionwithpositivealignment andbolteddesign.
4. SpiraFwound Gasket- metal/Graphits filled.
5. Precisionmachined ballsto 4 RMSlinishprovidesuperiorqualitywithlowtorqueandno leakags.
6. Blow-outProofStem- Parallelllat stemdrive.
Design(BSs351).
7. Anti-Static
8. MountingPad- 'lSO' mountingpadwithpadlockabls stoppositions.
9. SiutfingBoxCavity- Extradeep,machine-finished stutfingbox.
10.CavityRelieving Seat- Th€s€atdesignallowsexcessive cavitypressureto be relievedwithno seatdeflection.
11. StemSealRetainer- Double(internal/extemal) VitonO-Ringsealed.
12.ConicalDiscSpring(s)- Optional'live-load'packingdesign.
13.Packing- Die-formed, flexible,graphiteringsassureintegrityof sealat elevatedtemperatures.
14.ThrustBearing- Lowtorquedesign.

11t.l6([NG vALvE MFG.co.,LTo @

 MOUNTINGAND STEMSEAI DESIGN( Figure 2 )
Acfuolor Mounling(lSO-5211)
AllKUKAflanged end productsshall havean integrally
cast (lSO)actuatormountingpad.This featureprovides
for directmountof gear operatorsor actuators.The
additionalcost for a separatemountingbracketis
eliminated.

Live-LoodSlem Seol
This optionprovidespremiervalve stem sealingcharacteristics
for adversecondltionsof extremepressure/Temperature
variations.Designedto meet the most stringentfugitive Figure2
emissionregulations, the KUKA"live-load"designis comprised
of an extra deep stutfingbox/packing/stem seal retainerand
conicaldisc spring(s).Thedisc spring(s)providecontinuous
compressionof the packingassemblyand compensatefor
wear, the static sealed retainer,with two(2) tertlaryO-Rrng
seals,eliminatesstem galling.This uniquedesignlowers
requiredvalve stem torqueand increasesproductperformance
underall operatingconditions.
(u.s. PATENTpENDtNeSERTALNO. 081967,620)

ANT|-STAT|C (BS535t)
DESTGN
Figure3
Ballvalvespresenta particularproblemwith the build up of
staticelectricityaroundthe ball. AIIKUKA ball valves have
anti-staticdesignwhich providescontact betweenstem and
ball,and stem and bodyto eliminatestaticelectricity.

(APt607)
SAFE_DES|GN
E|RE
Flgwe4 & 5
In tho €ventof a fir€, the valveis requiredto makea downst€amEeal.Evenafterthe disintegrationof the TEFLONseat
KUKAballvalv€sprovidean exc€llentmetalto metalseal.Specialatt€ntionhasbeenpaidto the mechanicalstrength
andsealingeffciencyof the centralllangedjointot thevalvebody& cap.Hsavycastings& graphitefilledspiralwound
gasketassurezerc leakagebetweenbodyand cap.

Metalto metal
(ballto body)
Firesafeseal
after RTFE
meltdown

Spiralwound
Gasket Figure5

@ ruu KAilc vALvE rFG.co.,LTD

 FullPort Construction:
"fire-safe"
Splitbody,full port,free floatingball, designedto
API-607.,blow-outproofstem,cavityrelievingseats,anti-static
d e s i g n ,p r e s s u r eb a l a n c eh o l e i n b a l l a n d l o c k i n gd e v i c e .
D e s i g n e da c c o r d i n gt o A P I - 6 D ,A S M E B 1 6 . 3 4 ,A P I6 0 8
and BS 5351specifications.

NOTE:Manufactured andconformsto NACEstandardMR0175

* API-607"fire-safe"tested and certified,1/2'thru 8" size.

Dimensions
Face to Face A S M EB 1 6 . 1 0& A P I 6 D L o n g P a t t e r n

End Flange A S M E8 1 6 . 5
Min.Port API6D
M i n .W a l l T h i c k . ASMEB 16.34& BS 5351

Size 1/2-4 inch Size 6-8 inch Size3-10inch

Closs150/300
1/2" 314" 1" 1 1/2' 2" 21/2" 3u 4u 6" 8u
Valve Size
15mm 20mm 25mm 40mm 50mm 65mm 80mm 100mm 150mm 200mm

inch 0.59 0.79 0.98 1.50 1.97 2.56 2.99 3.94 5.98 7.99
ad mm 15 20 25 38 50 65 76 100 152 203
inch 4.25 4.81 5.00 6.50 7.01 7.52 7.99 9.02 1 55 1 17.99
150
L mm 108 117 127 165 178 191 203 229 394 457
(RF) inch 5.51 5.98 6.50 7.52 8.50 9.49 11.14 1:z^01 15.87 19.76
300
mm 140 152 165 191 216 241 283 305 403 502
inch 2.05 2.19 2.64 3.35 3.86 4.61 5.71 6.34 9.13 10.75
h mm 161 232 273
52 55.5 67 85 98 117 145
inch 3.46 3.62 398 4.88 5.59 6.26 7.64 8.27 11.50 12.52
H mm 88 92 101 124 142 159 194 210 292 318
inch 5.51 5.51 6.69 9.84 9.84 13.76 13.78 18.11 31.50 39.37
W1 mm 140 140 170 250 250 350 350 460 800 1000
inch N/A N/A N/A N/A N/A N/A 11.81 11.81 15.75 19.69
w2 mm N/A N/A N/A N/A N/A N/A 300 300 400 500
Lb 5 6 9 17 23 39 53 82 185 331
150 150
Approx. kg 2 2.8 4 7.5 10.5 17.5 24 37 84
Weight
Lb 6 9 12 23 31 62 73 110 238 406
300
kg 2.8 3.8 5.6 10.5 14 28 33 50 108 184
Gear operatorsare availablefor most sizes.

KUM KANG VALVE UrC.CO.,lrO @

 FullPort Construction:
Splitbody,full port,free floatingball,"fire-safe"designed to
API-607., blow-outproofstem,extendedstuffingbox,cavity
relievingseats,anti-staticdesign,pressurebalancehole in
b a l la n d l o c k i n gd e v i c e .D e s i g n e dt o A p l - 6 D ,A S M E 8 1 6 .
34 and 8S5351specifications.

Note:Manufactured andconforms to NACEstandardMR0175

. API-607"fire-safe"
testedand certified,112"thru6" size.

Dimensions
Face to Face ASMEB 16.10& API 6D LongPattern
End Flange A S M EB 1 6 . 5
Min. Port API6D
M i n .W a l l T h i c k . ASMEB 16.34& BS 5351

ftl
eV
dLry,p____]
6
F+f +illl-+ H
r!'-11$-
l l
Size 1/2-3 inch Size 4-6 inch Size 3-6 inch

Closs600
Valve Size
112' 3/4' 1u 1 1/2' 2" 3" 4u 6"
1Smm 20mm 25mm 40mm 50mm 80mm 100mm 150mm
inch 0.59 0.79 0.98 1.50 1.97 2.99 3.94 5.98
ad mm 15 20 25 38 50 7.6 100 152
inch 6.50 7.52 8.50 9.49 11 . 5 0 14.02 17.01 22.01
RF
mm 165 191 216 241 292 356 432 559
L
RTJ
inch 6.50 7.52 8.50 9.49 11.61 14.13 17.13 22.13
mm 165 191 216 241 295 359 435 562
h
inch 20.5 2.19 2.44 3.27 3.86 5.75 7.36 9.17
mm 52 55.5 62 83 98 146 187 233
inch 3 .4 6 3.62 4.17 5.00 5.59 7.68 9.76 11.61
H
mm 88 92 106 127 142 195 248 295
inch 5.51 6.69 6.69 9.84 9.84 13.78 31.50 3 1. 5 0
W1
mm 140 170 170 250 250 350 800 800
inch N/A N/A N/A N/A N/A 11 . 8 1 15.75 19.69
w2 mm N/A N/A N/A N/A N/A 300 400 500
Approx.Weight 600
Lb 8 1 1 15 29 59 117 205 389
ko 3.7 5 7 13 27 53 93 178
Gearoperatorsare availablefor mostsizes.

@ xum KANG vALvE MFG.co.,LTD

 ReducedPort Construction:
Splitbody,reducedport,freefloatingball,"fire-safe"
designed
to API-607*,blow-outproofstem,extendedstuffingbox,cavity
design,pressurebalanceholein ball
relievingseats,anti-static
and lockingdevice.Designed to API-6D,ASME B 16.34,API
608 and BS 5351specifications.

Note:Manufactured andconforms to NACEstandardMR 0175

" API-607"fire-safe" thru 10" size.
testedand certified,3/4"

Dimensions
Face to Face ASME816.10& API 6D LongPattern

End Flange A S M EB 1 6 . 5
Min.Port API6D
M i n .W a l l T h i c k . ASMEB 16.34& BS 5351

Size 2-4 inch Size 6-8 inch S i z e4 - 1 0 i n c h

Clqss 150/300

3/4' 1" 1 1/2' 2" 2112' 3" 4' 6" 8" 10"
Valve Size
20mm 25mm 40mm 50mm 65mm 80mm 100mm 150mm 200mm 250mm

inch 0.59/ 0.79 0.79/ 0.98 0.98/1.50 1 . 5 0I 1 . 9 7 1 . 9 7 t 2 . 5 6 2.5612.992 . 9 9t 3 . 9 4 3.94/ 5.98 5.98/ 7.99 / . 9 9/ 1 0 . 0 0
adladl mm 15 t20 20 125 25 t38 38/50 50/65 65/ 76 76 I 100 100 I 152 152 I 203 203 | 254
inch 4.61 5.00 6.50 7.01 7.52 7.99 9.02 15.51 17.99 20.98
150
L mm 117 127 165 178 191 203 229 394 457 533
(RF) inc h 5.98 8.50 7.52 8.50 9.49 1 1 . 1 4 1 2 . 0 1 15.87 1 9 . 7 6 22.36
300
mm 152 165 191 216 241 283 305 403 502 568
inch 2.05 2.19 2.64 3.35 3.86 4.61 5 . 7 1 6.34 9 . 1 3 10.75
h mm 273
52 55.5 67 85 98 117 145 161 232
inch 3.46 3.62 3.98 4.88 5.59 6.26 7.64 8.27 11.50 12.52
H mm 88 92 101 124 142 159 194 210 292 318
inc h 5.51 5.51 6.69 9.84 9.84 13.78 13.78 18.11 31.50 39.37
W1 mm 140 140 't70 250 250 350 350 480 800 1000
inc h N/A N/A N/A N/A N/A N/A 11.81 11.81 15.75 19.69
w2 mm N/A N/A N/A N/A N/A N/A 300 300 400 500
Lb 4.4 7.7 11.0 19.E 26.7 46.3 66.2 110.3 220.5 396.9
150
Approx kg 2 3.5 5 9 13 21 30 50 100 180
Weight
Lb 6.6 10.1 15.4 27.6 37.5 72.8 88.2 154.4 286.7 485.1
300
kg 3 4.6 7 12.5 17 33 40 70 130 220
Gearoperatorsare availablefor mostsizes.

KUM KANG vALvE MFG.co.,LTo @

 ReducedPort Construction:
Splitbody,reducedpod,freefloatingball,"fire-safe"
designed
to API-607*,blow-outproofstem,extendedstuffingbox,cavity
design,pressurebalanceholein ball
relievingseats,anti-static
and lockingdevice.Designedto API-6D,ASME B 16.34and
BS 5351specifications.

Note:Manufactured andconformsto NACEstandardMR 0175

. API-607"fire-safe"
testedand certified,2"thru8" size.
Dimensions
Face to Face ASMEB 16.10& API 6D LongPattern
End Flange A S M E8 1 6 . 5
Min.Port API6D
M i n .W a l l T h i c k . ASMEB 16.34& BS 5351

ffi

d[--:-6___-1
6
lf+f+il1.+-
+ il
1_l---115-l
Size 2-4 inch Size 6-8 inch Size 4-8 inch

Closs600
2u 3" 4" 6u 8"
Valve Size
50mm 80mm 100mm 150mm 200mm
inch 1 . 5 0| 2 . O O 2.00/ 3.oo 3 . O O/ 4 . O O 4 . O O/ 6 . 0 0 6.00 / 8. O O
ad I ad1 mm 38/50 50t76 76 | 100 100 I 152 152 | 203
RF inch 11.50 14.O2 17.O1 22.O1 25.98
L mm 292 356 432 559 660
RTJ inch 11.61 14.13 17.13 22.13 26. 10
mm 295 359 435 562 663
h inch 3.27 3.86 5.75 7.36 9.17
mm 83 98 146 187 233
inch 5 .0 0 5.59 7.68 9.76 11.61
H mm 127 142 195 2.48 295
inch 9.84 9.84 13.78 31.50 31.50
W1 mm 250 250 350 800 800
inch N/A N/A 11.81 15.75 19.69
w2 mm N/A N/A 300 400 500
Approx. Lb 40 66 147 262 400
600
Weight kg 18 30 67 120 182
Gear operatorsare availablefor most sizes.

@ xuru KANG vALvE MFG.co.,LTD

 FullPort Construction:
Splitbody,full& Reducedport freefloatingball,"fire-safe"
designed
to API-607*, proofstem,cavrtyrehbvrhg
blow-out seats,antFstatbdestln
pressurebalancehole in balland lockingdevice.Designed
accordingto API-6D,ASMEB 16.34andBS5351 specifications.

NOTE:Manufactured andconformsto NACEstandardMR 0175

. APf-607"fire-safe"testedand certified,S/4"thru 2" size.

Dimensions
Face to Face ASME816.10 LongPattern

End Flange A S M E8 1 6 . 5
Min.Port API6D
Min.WallThick. ASMEB 16.34& BS 5351

Closs900/1500(#CB) Closs900/1500(#CC)
3/4" 1" 1 1/2" 1" 1 1/2" 2"
SIZE 20mm 25mm 40mm 25mm 40mm 50mm

1.50 sd I ad1 ad I adl ad I adl

inc h 0 .7 5 1.00
sd 0.75/1.00 1.00/1.50 1.50/2.00
mm 19.1 25.4 38.1 20/25 25/38 38/50

inch 9 .0 0 10.00 12.00 10.00 12.00 14.50

L 254 304.8 368. 3
mm 228.5 254 304.8

inch 2 .4 2 2.59 3.48 2.42 2.59 3. 48

h 65.8 88.4 6 1. 5 65.8 88. 4
mm 61.5

inc h 3 .7 8 3.95 4.83 3.78 3.95 4. 83

H 100.3 122.7 96.0 100.3 122.7
mm 9 6 .0

inch 1 0 .2 4 1 0 .2 4 10.83 10.24 10.24 10.83

W1 260 260 275
mm 260 260 275

Approx. Lb 24 31 58 21 40 80
Weight Kg 11 14 26 14 18 38

KUM KAIG vALvE MFG.co.,LTo @

 FullPort Construction:
Splitbody,full&Reducedport freefloating ball,"fire-safe"
designedto
API-607.,
blow-outproofstem,cavityrelieving
seats,
anti-static
design,
pressurebalancehole in balland lockingdevice.Designed
accordingto API-6D,ASMEB 16.34andBS5351specifications.

NOTE:Manufactured andconformsto NACEstandard MR0175

. API-607"fire-safe"
/2" lhru 11/2"size.
testedand certified,l

Dimensions
Face to Face ASME816.10 LongPattern
End Flange A S M E8 1 6 . 5
Min.Port API6D
M i n .W a l l T h i c k . ASMEB 16.34& BS 5351

Clqss 25oo(#cB) Clqss2500(#CC)

1/2" 3/4" 1" 3/4" 1" 1 1/2"
SIZE
15mm 20mm 25mm 20mm 25mm 40mm
-
inc h 0.50 0.75 1.00
ad I adl sd I adl anl ad1
ad 't5 0 . 5 0/ 0 . 7 5 0 . 7 5/ 1 . 0 0 1 . 0 0/ 1 . 5 0
mm 20 25 1 5/ 2 0 20/2s 25/38
inc h 10.38 10.75 12.12 10.75 12.12 15.12
L
mm 264 273.5 308 273.5 308 387
inc h 2.30 2.42 2.75 2.3 2.42 2.75
h
mm 58.4 6 1. 5 69.9 58.4 6 1. 5 69.9

inc h 3.66 3.78 4 . 10 3.66 3.78 4.10

H
mm 93.0 96.0 104.1 93.0 96.0 104.1
inc h 10.24 10.24 10.24 10.24 10.24 10.24
w'l
mm 260 260 260 260 260 260

A ppr ox . Lb 33 43 62 29 55 85
W eight Kg 15 19 28 13 25 38

xuu KANG vALvE MFG.co.,LTD

@
 MATERTAL
STANDARD FORMODEL#CBA/#CCA
SPEC|F|CATTONS (ACC.TO ASTM)

CARBONSTEEL LOW-TEMP.CARBONSTEEL
PARTNAME STAINLESSSTEEL
NORMAL I SOUR NORMAL I SOUR
BODY
A216Gr.WCB A352Gr. LCC 4351 Gr.CFSM
CAP
BALL A351Gr. CFBM
STEM A276TYPE316
oLASS150.300 RTFE
SEAT
CLASS600 S - NYLON S-PE/PCTFE S - NYLON

PACKING GRAPHITE
GASKET / SW(316+GRAPHITE)
PTFE/ GRAPHITE
ISO PAD A216Gr.WCB A352Gr. LCC A351Gr. CF8
STEMSEAL RETAINER A276TYPE316
O - RING VITON
STOPPER 4283 Gr. D A24OTYPE 304
CLASS150.300 PTFE
BEARING
CLASS600 NYLON S-PE NYLON

BOLT A 1 9 3G r .8 7 I A 1 9 3G r .B 7 M A320Gr. L7 | 4320 Gr. L7M A 1 9 3G r .8 8

LEVER DUCTILECASTIRON
GEAROPERATOR CASTIRONCASE.DUCTILEIRONGEAR,HIGHCARBONSTEELWORM

t
rso52ll MOUNTINGPADFORACTUATORSELECT|ONtur.rrr:mm
,N-m)
/ l \ - T t s o5 2 11 +O.2 0 0 CB cc
- l J 6l
t-L MOUNIING +0.1 - 0 . 1- 0 . 1APPROX.
D 1 D2 D3 N-oh h 1 T D4 S 1 H
TOROUE 150 300 600 150 300 600
Max,
PADN(
F04 63 56 42 30 4-5.5 3 7 1 1 . 58 1 4 112',314' 112"314314'l' 3/4'J' 314'l'
112',314
F05 125 65 50 35 4-7 3 7 1 5 1 0 17
1 1 1 1 1/2" 1 1t2 1 1/2
1 112' 1 112'
F07 250 90 70 55 4-9 3 1 2 20 1 4 23 1,112"2
2 " r 3 " 2",3" 2",3"
) ' 2 1 1 2 '2' ,2112'

F 1 0 500 25 02 70 4-11 3 . 5 1 5 '30 "

20 30 3",4" 3",4" 3" 4 " , 6 " " 4 " , 6 t ' 4u
{ See attached sheet on this t6"disc for the
F12 1 , 0 0 0 5C 25 B5 4-14 3 . 5 1 8 40 30 50 g"
It F 1 42,0001 7 5 40
updated mounting pad information.
1 0 0 4 - 1 8 4 . 5 20 50 36 65 8"
6"
8u
4u
6"
8"
10" 10"
6"
I'

(Cv ) FORMODEL#CBA/#CCA
FLOWCOEFFICIENT
VALVESIZE 112' 314" 1 1 112" 2" 2 1 1 2 " 3" 4u 6" 8" 10"
CBA 25 50 95 260 480 760 1300 2300 5550 100801 6 3 0
ccA 120 311 535 1't12 1908 0
Cv = FLOWlN U'S' GALLONS/MINUTE
OF 60"FWATER
A P I 6 D TEST
CLASS 150# Hydrostatic 300# Hydrostatic 600# Hydrostatic 900# Hydrostatic I 500# Hydrostatic SEAT TESTDuration(minutes)
(Air)
SHELL SEAT SHELL SEAT SHELL SEAT SHELL SEAT SHELL SEAT Type ll SHELL SEATSEAT
W.P W.P W.P W.P W.P SIZE
xsuRE
MATERIAN
pstg pstg kS/.nl p s t g kS/o'i pstg pstg ks/0n' pstg Kg/orf pstg pstg kg/qn' pstg kg/*i psig pstg kg/* psig kS/oti
pstg psig ks/o,i pstg <g/o't )sig tgla (Air)
{Hydroslatic)

AlOs^^/CB285 4 5 0 3 1. 7 325 2 2 . 9 7 4 0 1 125 7 9 . 2 825 5 8 . 1 14 8 ( 157 16 5 0 1 1 6 22C335C zJo 245t 1 7 2 1 7 0 5557 392 4 10 ( 289 t2" z z
ILF2

290 4 5 0 3 1. 7 325 2 2 . 9 7 5 0 1 125 7 9 . 2 825 5 8 . 1 15 0 ( 2225 1 5 8 | 6 5 0 t 1 6 3 3 7 5238 2 4 7 ! 1 7 4 l 7 s ( 562! 3 9 6 412! 290 o

- rd'
80.8

10.3 ).72
12" 5 q
LUE' 265 4 0 0 28.1 3 0 0 2 1. 1 6 9 5 0 5 0 7 3 . 9 7 7 5 5 4 . 5 13 9 ( 2100 1 4 8 15 5 0 1 0 9 3 15 ( 2 2 2 I J U T toz )47( 5224 368 269 - ts" 1 5

F316/CF3/ 2 7 5 425 29.9 325 2 2 . 9 7 2 0 I 1 0 0 7 7 . 4 8 0 0 5 6 . 3 t44C 1 7 5 1 5 3 1600 1 1 3 2 16 ( 325( 229 169 5 4 0 ( 3 8 0 l 9 7 l 280 >20" 30
cF8/CF8M

KuM KANG vALvE MFG.co.,LTo @

PRESSURE/TEMPERATURE
RATINGSFORMODEL#CBA/#CCA
FullPort 112"-2",
ReducedPort2"-3" FullPort2112'-4',ReducedPort4"
Icuu' t5oo: -

1200i
11 0 0 :
_1000;
P900f
'800i
Ll,J'^^
t tvv BODY
a 600
@500i
400 H +ooi
300 (L.^^
300 !
200 200
100 150 100 150
0 BODY BODY

32 100 200 300 400 500 600 700 800 850 300 400 500 600 700 800850
-"F
TEMPERATURE TEMPERATURE.'F

Full Port6", ReducedPort6"- B"

15oo - - -i

1000i
vJ onn I
CLASS ULAJJ
' 800 600 600
BODY
S zoo BODY
a 600
(/) 500 CLASS
H +oo
L 3oo
300
;J:4---:;.:-
BODY BODY
200 CLASS CLASS
100 150 150
It
392
BODY BODY
32 100 200 300 400 500 600 700 800850 32 100 200 300
-"F 400 500 600 700 800850
TEMPERATURE TEMPERATURE-"F
THE DOTTEDLINESINDICATEWORKINGPRESSURESFOR CAST STATNLESS STEELBODIES.(ASTM4351-CF8M)
THE OPERATINGTEMPERATUREOF THE VALVESIS LIMITEDBY THE MATERIALOF SEATAND SEAL.

TORSUE
DATAFORMODEL#CBA/#CCA
26550 10"
17700 8'
8850
o
7965
7080
6 19 5
5 3 10
4425

5 ss+o
F
\J
zoss 300 4" 6'
F
Y 1770 200
.t 4'
,.ut sza 150
o 2112'
885 100
z'
443 50 1 1t2' z

354 40
266 1'

177
88.s

o eRns 5 10 15 20 30 40 51 75 102 CBA CCA

LBS.in N.t pstc 73 145 218 2gO 435 580 740 1088 1480VALVESIZE
D I F F E R E N T I APLR E S S U R E
S E A TM A T E R I A L R
; EINFORCED
P.T.F.E
TO SELECTTHE ACTUATOR,ADDING25% SAFETYFACTORTO THE REQUIREDTORQUESHOULDBE CONSIDERED.

@ xun KANG vALvE MFG.co.,LTD

 Material
No. Parts Q'tv (ASTMSpecification)

414 C o n i c a lS P r i n g 2 3O4SS
413 Cap Bolt Nut 4 A194-2H(M) A194-7(M) A 19 4 - 8
412 Cap Bolt 4 A193-87(M) A320-17(M) A 19 3 - B 8
411 Stopper 1 A 16 7 - 3 0 4
409 Tab washer 1 A 16 7 - 3 0 4
408 Stem Nut 1 A 19 4 - 8
406 Thrust Bearing 1 RTFE
403 Seat 2 RTFE/PTFE
402 Ball 1 A276-304(316) A276-304(316) A 2 7 6 - 3 0 4 ( L ) A276-316(L)
401 cap 2 A105 A352-LF2 A 1 8 2 - F 3 0 4 ( L ) A 18 2 - F 3 16 ( L )
39 HandleNut 1 A 19 4 - 8
37 Nameplate 1 STAINLESSSTEEL
36 Handle 1 A 10 8 - 1O 2 O + V I N YC LO A T I N G
'l
20 Gland Packing PTFE
19 Gland 1 PTFE/RTFE
17 Gasket 2 PTFE/RTFE
4 Stem 1 A276-304(316) A276-304(316) A 2 7 6 - 3 0 4 ( L ) A276-316(L)
1 Body 1 A105 A352-LF2 A182-F304(L) A182-F316(L)
Gear operatorsare availablefor most sizes.

Kut KANG vALvE tFG.co.,LTo @

 CONSTRUCTION:
SplitBody,ReducedBoreFullBoreFloatingBall,
A n t i - B l o wo u t S t e m

Option:
Fire safe Design,CavityRelievingSeats,Anti-StaticDevice
PressureBalanceHole in ball,LockingDevice

D e s i g n: B S5 3 5 2 a n dA S M EB 1 0 . 3 4A
, pt 599
End to End : KUKAstandard
End Type : Socket-welded(ANStrutS)
E n dC o n n e c t i o: nA S M EB 1 6 . 11

r
i
E.
n_
o_

Clqss600/800 U n i t: m m
Port Size(lnch) H(APPROX.) L W ad AB c
1/2 60 66.5 130 11.2 21.70 10
3/4 62 72.5 130 14.2 27.05 13
Redued
I 74 95.0 160 20.5 33.08 13
1 1/2 88 11 6 . 0 230 3 1. 6 48.65 13
2 93 128.0 230 38.1 61.10 16
1/2 62 72.5 130 14.2 21.70 10
3/4 74 95.0 160 20.5 27.05 13
Full 1 88 11 6 . 0 230 31.6 33.80 13
1 1/2 93 t28.0 230 38.1 48.65 13
2 107 155.0 230 5 1. 0 61.10 16

Clqss1500 U n r t: m m
Port Size(lnch) H(APPROX.) L W ad OB c
t/2 65 76.0 130 11.2 2 1. 3 0 10
3/4 67 101.6 r60 14.2 26.70 13
Redued 1 72 120.0 230 20.5 33.08 13
1 1/2 93 134.0 230 31.6 48.70 13
2 105 155.0 230 38.1 60.30 16
1/2 67 1 0t . 6 160 14.2 21.30 10
Full
3/4 72 r 20.0 230 20.5 26.70 13
1 93 134.0 230 3 1. 6 33.80 13
1 1/2 105 155.0 230 38.1 48.70 13

@ xurrr KAilc vALvE MFG.co.,LTD

 CONSTRUCTION:
S p l i tB o d y ,R e d u c e d& F u l lP o r t ,F l o a t i n gB a l l ,
A n t i - B l o wo u t S t e m

Option:
Fire safe Design,CavityRelievingSeats,Anti-StaticDevice
PressureBalanceHolein ball,LockingDevice

D e s i g n: B S 5 3 5 2 a n d A S M E8 1 6 . 3 4 A
, P I6 0 8
End to End : KUKAstandard
End Type : Screwed(NPT/PT)

E n dC o n n e c t i o :nA S M EB 1 . 2 0 . 1 ( F N P T )

x
E.
o_
o_

Clqss600/800 U n i t: m m
Port Size(lnch) H(APPROX.) L W od S
1/2 60 66.5 130 1 1. 2 3.5
3/4 62 72.5 130 14.2 4.0
Redued '| 74 95.0 160 20.5 7.5
1 1/2 88 | 16.0 230 3 1. 6 8.5
2 93 128.0 230 38.1 9.0
1/2 62 72.5 r30 \4.2 3.5
3/4 74 95.0 r60 20.5 4.0
Full 1 88 11 6 . 0 230 31.6 7.5
1 1/2 93 128.0 230 38.1 8.6
2 107 155.0 230 5 1. 0 9.0

Clqssl500 Unit:mm
Port Size(lnch) H(APPROX.) L W ad S
1/2 65 76.0 130 11.2 13.5
3/4 67 101.6 160 14.2 14.0
Redued 1 72 r 20.0 230 20.5 17.5
1 1/2 93 134.0 230 3 1. 6 18.5
2 105 155.0 230 38.1 r9.0
1/2 67 r0 1 . 6 r60 14.2 13.5
3/4 72 120.0 230 20.5 14.0
Full 17.5
93 134.0 230 31.6
t 1/2 105 155.0 230 38.1 18.6

KuM KANG vALvE MFG.co.,LTo @

 OConstruction
: The valvefor low temperatureserviceprovidesan ExtendedBonnetwith
a vapourspacebetweenvalvebodynearthe ambienttemperatureto permita normal
operation.The extendedbonnetis a castedone piecebody.The std. length,from -20"C
to -80'C,is 150mm.The std.length,from-280"Cto -196"C,is 300mm.
Differentlengthshavean intermediateweldedtube.

I Rating,Connectionand Face-to-face
Dimensions: Theseare the sameas the std. types.

Moleriols
No.PartName CSVersion SSVersion

1 Body LCB,LCC,LCl CFSM

2 Stem 3 16 5 5 31655
3 Guide
Ring 31655 31655
4 StemBearing PTFE PTFE
5 BonnetGasket PTFE PTFE
6 Thrust
Washer PTFE PTFE

@ xun KANG vALvE MFG.co.,LTD

 all previouspoliciesfor returngoods.
Thispolicysupersedes

| . Goods returned at customers request :

A. Materialmustbe :
1. Of our manufacture.
2. ln clean,newand saleablecondition. All materialmusthavebeenstoredindoors.
3. Shippedfrom one of our servicecenterswithin12 calendarmonthsprecedingthe request
for return.The returnwill not causeinventoryto exceedour maximumallowablelevels.
4. Personallyinspectedby a KUKrt representative priorto its return.
5. Special or non-standard items are non'returnable.

B. Returnshipmentsmustbe prepaid.

C. Creditwill be allowedat invoiceprice,less25%handlingcostand lessany freightpaidby KUI(rt.

D. ReturnGoodsAuthorization after
(RGA)form mustbe furnishedby a KUKn representative
inspectionof the materialand mustaccompanythe shipment.

E. Shipmentsreceivedwithouta RelumGoodsAuthorization (RGA)formwill be refused.

for any storageand /or returnfreight.
Customerwill be responsible

F. Materialreturnedwhichis not of rurn manufacture,notin cleanand salableconditionor not

authorizedfor be
return,will returned to the collect.
customer-freight

ll . Goods returned because of an error by ruxn

salablecondition.
A. Materialmustbe in a clean,new,

collect.
B. Returnshipmentshouldbe made-freight

C. FullCreditwill be allowed.

form priorto the returnof the material.

D. Customermust receiveReturnGoodsAuthorization

E. ReturnGoodsAuthorization (RGA)form mustaccompanythe shipment.

(RGA)formwill be refused.
Shipmentsreceivedwithoutthe ReturnGoodsAuthorization
All requeststo returnmaterialto rurn mustbe submittedto our officein writingfor authorization.
This policywill be strictlyenforced.

KUIUIKANG vALvE MFG.co.,LTD @

 . Scope I Thesetermsand conditionsapplyto all xurnvalve productsandsupersedeall oreviouslv
publishedlerms and conditions.. Hereafter,all referencesto KumKang Vaive Mfg.C6.,Ltd.o?
xux^ ValveCompany,Inc.shall be referredto as,' KUK^'
'fPProval.: All.quotations, contracts,orders,or agreements are subjectto approvaland/oracceptance
by the.mainofficeol r(ut(rt. We.reservethe rightto correctclericaloi stenographiceriors in
quotations,orders,invoicesandothercontracts, agreements, or documents.
. Prices : Possessionof pricelistswill not be construedby KuKl as an obliqationor offerto sellthe
goodslistedthereinto anyone.All pricescontainedther6inare subiectto ch-anoe withoutnoticeand
willsupersede all previouslists.All orderswillbe invoicedat pricedin effectat thetimeof shioment
unlessquotedin writing.
. ChangeOrdersi Orderscannotbecancelled or specifications
changedwithoutthe consentof l(ut(A,
andthen,onlyin termsindemnifying Kur^ againstloss.
. Ouotations : GoodsquotedF_.O.B. our servicecente(s) are subjectto priorsale.Pricesquotedare
validonlyfor the durationindicated. in the quotation.Ouotedpricessdpersedeall previcius prices,
quotationsor contracts,and are subjectto changewithoutnotiie.
o Cancellations: Ordersplacedwith Kur<rr cannotbe cancelled withoutour priorwrittenconsent.
A cancellationchargemaybe applicable as outlinedin ourquotation.
. Shipments: All materials shippedwillbe carefullyexamined,counted and packed.Thecostol anv
specialpackingor specialhandlingas requiredby the buyershallbe addedtd the amountof the orddr.
o Claims :All claimsfor shortages,corrections,or deductionsmustbe madewithinlO daysafterreceipt
of goods. Responsibility for gbodslostor damagedin transitrestswithcarrier;claimsShouldbe filid
withthe carrierby the.consignee. Delivery. oJmaterialto a commoncarriershallbe considered delivery
to the buyerand shallbe at the buyersriskthereafter.
. DeliveryDelays..:We-assumeno responsibility for delaysin deliveryor defaultsresultingfromstrikes,
workstoppages,fires,floods,accidents,war,inability to obiainmaterial-sor anyothercausdunavoidable'
andbeyondour control.
oTaxes : KUKA quotationsand/orcontractsdo notincludeany municipal,state,or tederalsales,excise,
useoccupational or othertaxes;and anysuchtax,ifpaidby Lis,will beichargedto the purchaser.
' Cataloglllustrations: illustrations are actualrepresentations of our products,butdo not
.Catalog
necessarily representall sizesand/orall details.In keepinqwithour policvof'continuino oroduct
improvement,wb reservethe rightto institutechangesin materials,desighs aridspecificatioi's'without
notice.
o CatalogWeights : Catalogweightsrepresentaverageweightof our products.
. Returns: See ReturnGoodsPolicystatement.
. SpecialOrders: Ordersfor specialgoodsmustbe in writingandaccompanied withdetailedDrints
and/orsetsof.specifications.Orders will not be enteredwithth-efactoryotherwise.Specialorderdmay
notbe cancelled.
.Special Terms& Conditions : Specialterms.andconditionsprintedon a buyer'sorderwillonlyapply
insofaras theyconformto the termsand conditionsdetailedherein.Termsahdconditionsot ah oidei
thatchangeor modifythoseon thisdocumentshallnotbe bindingon KUKI.
oTerms :Standardtermsare net 30 days.lnthe eventa cashdiscountis offeredbevondour standard
terms,theallowedpercentdiscountshallbe basedupondaystromdateof invoic'e. Allowable cash
discounts do not includesalestax,transportaion or laborch-arges.
. Time Price Difference:Afterthe expirationof standardterms,atimepricedifferenceof 2% oermonth
on the unpaidbalancewillbe chargeduntilpaidin full.
' Attorney Fees & Costs : In the eventour invoiceis referredto our attornevfor the purooseof
enforcingits termsand collectionol money,reasonable attorneyfees and costswill be aijdehto the
unpaidbalance.
. FreightTerms:All shipments are F.O.B.ourservicecente(s)unlessotherwise statedin writing.
. Warranty: See Warrantystatement.
 GUIDE
HOW TO ORDERT SELECTION

FigureNumberingSystem
tr t r E trtr T tr
(6) (7)
(1) (2\ (3) (4) (5)

-
(l) MODEL #C : DiamonOSeriesBallValve,superior quality,optimumperformance, NACE
fire safedesigned,
standardMR0175compliant, -
cavityrelievingSeats,anti staticdevices,pressure
balancedhole
box,
in ball,extradeepstuffing lSO52l1 mountingpad, padlockableposition flanged
stops, ends.

(2) CONFIGURAIION:
A Floatingball,one piecebody,reducedport
B Floatingball,splitbody,full Port
c Floatingball,splitbody,reducedport
G TrunnionMounted,splitbody,reducedport
F TrunnionMounted,splitbody,full port

(3) PRESSURE
CLASS
JISl OK

ANSIClass1500

(4) MATERIALS : BODY/TRIM

OF CONSTRUCTION
A WCB+ 304 G CNTM + ALLOY2O
B W C B+ 3 1 6 H DUPLEX+ F51
c CF8 + 304 J LCB + 304
D C F S M+ 3 1 6 K L C B+ 3 1 6
E CF3 + 3041 L L C C+ 3 1 6
F C F 3 M+ 3 1 6 L S SPECIALMATERIALS

(5) MATERIALS : SEAT

OF CONSTRUCTION
SEAT REMARKER
E RTFE
G PTFE
N S-NYLON
'V" API Grade
V DEVLON
U S-PE UHMW-PE
K PEEK
S SPECIALAPPLICATIONS

(6) OPERATORS
L MANUALLEVEROR SOCKETHANDLE
G ENCLOSEDWORMGEARWITHHANDWHEEL
B BARESTEMFORACTUATOR
P ENCLOSEDPNEUMATICACTUATOR
M ENCLOSEDMOTORACTUATOR

(7) OPTIONS
N NOTAPPLICABLE
B EXTENDEDBONNET(CryogenicService)
E EXTENDED STEM
F FLANGEDENDOF SPECIALFACINGS
L LIVE-LOADPACKINGASSEMBLY
s SEALANTINJECTIONSYSTEM(Models#CB,CC,CF,CG)
R RINGTYPEJOINT

KuM KANG vALvE MFG.co.,LTo @

 P

5320 RoperRoad Ph# 790,450'9444

Edmonton,AB T68 3E9 Fax# 78O-,450-3848
E-mail: sales@prismfl
ow.com Toll Free# 1€8&988€009

KT'K,r K U I II ( A I t I G
UATUE
MTG.C|l.,LTD.

Headquarters,Manufacturing& InternationalSales.
#209-'lO Jang-Dong, Dalseo-Gu,
Daegu,Korea
Tel:82-53-581-4500 -4505
Fax:82-53-581
http://www.kuka.co.
kr
e-mail:[email protected]
Seoul Office.
Rm 1601,PoongLimVip-Tel, 404
GongDukDong,MapoGu,SeoulKorea
Tel:82-702-46O0Fax:82-2-702-4660
KUKA VALVE CO. INC.
4324EASTPARK DRIVEHouston,
TX77O2B
Tel:1-713-690-9661
Fax:1-713-690-9240
PRISM FLOW PRODUCTSINC.
5320RoperRoad,Edmonton, AlbertaTOB3E9
Tel:1-780-94444 Fax:1-780-450-3848
KUKA PTE. LTD.
8 PandanCrescent, #01-03,UETechPark,
Singapore 128466
Tel:65-6227-2024 Fas<:65-6227
-2544

BULLETTN,
Aprir.2003

KlrKrt Warranty- All l(lrl(rl Valvesareguaranteed againstdelectsin materialandworkmanship fora periodof oneyearfromshipping date.
All metalsandresilientsynlhetics areguaranteed to be of the materialspecified.
Thiswanantyis limitedto the furnishing of replacements lound
delectiveby KlrKrtand doesnotextendlo claimsfor anylabor,consequential damages, downtime or anyothgrloss,damageor gxpenseot
anykindarisingoutof thedefect.We do notallowclaimstor unauthorizgd repairs,laboror material.Purchasersare expected lo maketheirown
judgementto determinethe suitabilityof theseproductsfor theirpurposes.Thiswarrantydoesnotapplyto productsmanufactured by others.
Theforegoing is the onlywarrantyandno otheris €xpressed or implied.CHANGEof DESIcN: We resarvethe rightto discontinue the
manufactureof,or changeor modify, thedesignandconstruction ot any!(lrl(rt product,in duecourseot ourmanufacturing procedure,without
incuringanyobligationto acceptfor credit,to repla@or tumishor installsuchchangesor modifcationson productspreviouslyor subsequerly sold.