Scribd
Upload
10 views

Build

Uploaded by

catur skak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
10 views

Build

Uploaded by

catur skak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

# Transistors

Q8 = PNP 2SB688 BJT power transistor


Q7, Q10 = NPN 2SD718 BJT power transistor

# Mosfets

Q1, Q2, Q3, Q4, Q5, Q6 = IRFP260N Mosfet ( mounted on the bottom side with the
blank drain metal to the heatsink )

# Optocoupler

U1 = DIP8 Socket with 6n137 ( I recommend to not solder the optocoupler directly
to the PCB and use a DIP8 socket instead )

# LEDs ( optional )

D16 = Low current LED green


D15 = LED blue

# Ceramic disc capacitors

C1, C10, C23 = 100nf 50V ceramic capacitors


C9, C11, C14 = 100pF >100v ceramic capacitors

# Capacitors

C4 = 100uF >100V photo flash or low ESR capacitor


C19 = 220uf 100v capacitor
C2, c12 = 680uf 25v capacitor

# Bridges ( I clipped of two legs from a 5W resistor and bend them into a U shape.
See the images for details )

R30, R31

# Diodes

D1, D3, D6, D7, D10, D12 = SB 140 DIO Schottkydiode, 40 V, 1 A, DO-15 ( fast
turn off diodes for Mosfets )

# Resistors

R8, R9, R14, R15, R19, R22 = 100kOhm 1W ( pulldown resistor for the mosfet gate )
R6, R7, R12, R13, R18, R21 = R4.7 2W ( Mosfet gate resistors. Value could change
to 6.8Ohm later if it works better. )

R3 = R560 5W axial
R4 = R560 2W

R1 = R220 1W
R29 = R200 1W
R2 = 4.7kOhm 2W
R33 = 4.7kOhm 2W
R28 = R560 1W
R5 = 1kOhm 1W

# Trim Pot

RV1 = 10kOhm 3296 Trim Pot

You might also like