Scribd
Upload
105 views4 pages

Main Board - Reset Procedure

Uploaded by

Byron Francis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
105 views4 pages

Main Board - Reset Procedure

Uploaded by

Byron Francis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

KONICA MINOLTA

Confidential

October 18, 2019


Support Operation Div.
KONICA MINOLTA, Inc.

bizhub 4000i/5000i/4020i/5020i
Main PCB ASSY Reset Procedure
1. Outline
This procedure describes how to reset Main PCB ASSY.

2. Prepare
Use the following driver and application to reset Main PCB ASSY.
- Maintenance driver
- MemoryAccessTool.exe
- MainPCBReset.exe

Install the “Maintenance driver”, “MemoryAccessTool.exe” and “MainPCBReset.exe” to PC.


* The install procedure of Maintenance driver, please see the "APPENDIX 2 INSTALLING THE
MAINTENACE DRIVER" in the service manual.

3. Reset Procedure
3-1. bizhub 4000i/5000i
3-1-1. Method of entering maintenance mode for service personnel.
Press the [OK] key and then the [Go] key while the machine is in the ready state.
Then, press the [▲], [▲], [▼], [▼], [▲], [▲] key to enter the maintenance mode.

3-1-2. Set the Maintenance driver as a default printer.

3-1-3. Connect the machine to PC using the USB cable.

3-1-4. Start the “MemoryAccessTool.exe”.

3-1-5. Click the [Execute], and then wait more than 5 sec.

3-1-6. Close the “MemoryAccessTool” screen.

3-1-7. Start the “MainPCBReset.exe”, and then wait more than 5 sec.
Check the counter as following procedure.
1) Press the [▲] or [▼] key on the Maintenance mode and select the [MAINTENANCE77]
and press the [OK] key.
2) Check the clear of error history and another counter. (See the following image)
3) Click the [X].

1 / 4
KONICA MINOLTA
Confidential

October 18, 2019


Support Operation Div.
KONICA MINOLTA, Inc.

Page Count
Error History

Page Count

Jam Count

3-1-8. Turn OFF the printer.

2 / 4
KONICA MINOLTA
Confidential

October 18, 2019


Support Operation Div.
KONICA MINOLTA, Inc.
3-2. bizhub 4020i/5020i
3-2-1. Method of entering maintenance mode for service personnel.
Press and hold the [Home] key for approximately 5 sec
while the machine is in the ready state. The display
shown on the right appears on the LCD.

3-2-2. Press the blank field at the bottom. The display shown
on the right appears on the LCD.

3-2-3. Press the [*], [0], [0], [0], [0], [0], [0] keys in this order.
The display shown on the right appears on the LCD,
and the machine enters into maintenance mode.

3-2-4. Set the Maintenance driver as a default printer.

3-2-5. Connect the machine to PC using the USB cable.

3-2-6. Start the “MemoryAccessTool.exe”.

3-2-7. Click the [Execute], and then wait more than 5 sec.

3-2-8. Close the “MemoryAccessTool”.

3-2-9. Start the “MainPCBReset.exe”, and then wait more than 5 sec.
Check the counter as following procedure.
1) Press the [7], [7] key on the Maintenance mode.
2) Check the clear of error history and another counter. (See the following image).

3 / 4
KONICA MINOLTA
Confidential

October 18, 2019


Support Operation Div.
KONICA MINOLTA, Inc.

Page Count
Error History

Page Count

Jam Count

3-2-10. Turn OFF the printer.

End

4 / 4

You might also like