K3V-K3U.

book Page i Tuesday, February 17, 2004 9:48 AM

Notebook Computer
User’s guide
K3V-K3U.book Page ii Tuesday, February 17, 2004 9:48 AM

Copyright © 2004
All Rights Reserved

Notebook Computer User’s guide

Original Issue: February 2004

Changes may be made periodically to the information in this publication without obligation to notify any
person of such revision or changes. Such changes will be incorporated in new editions of this manual or
supplementary documents and publications. This company makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of
merchantability or fitness for a particular purpose.
Record the model number, serial number, purchase date, and place of purchase information in the space
provided below. The serial number and model number are recorded on the label affixed to your computer.
All correspondence concerning your unit should include the serial number, model number, and purchase
information.

Notebook Computer

Model Number : __________________________________

Serial Number:____________________________________
Purchase Date: ___________________________________

Place of Purchase: ________________________________

All trademarks and registered trademarks are the properties of their respective companies.
K3V-K3U.book Page iii Tuesday, February 17, 2004 9:48 AM

iii

Preface
This notebook computer incorporates such features as CardBus, internal pointing
device, IEEE 1394, and Universal Serial Bus 2.0 in a portable package.
This manual should answer most of the questions you have about the day-to-day
operation of your notebook computer.
You should also take advantage of the online help files that are available with
almost all of the programs shipped with your computer.
We hope you enjoy your notebook computer. With proper care, your computer will
provide you with years of productive service.

Connecting the computer

Connecting the computer is as easy as 1-2-3.
1. Insert the battery and align the arrows (1); slide the battery (2) until it clicks
into place.

Note: When using a battery pack for the first time, fully recharge the battery,
then disconnect the adapter to use up the battery before recharging again.
Perform this action twice to condition the battery pack.
K3V-K3U.book Page iv Tuesday, February 17, 2004 9:48 AM

iv

2. Connect one end of the AC adapter to the DC-in port on the computer’s rear
panel and the other end to a properly grounded power outlet.
K3V-K3U.book Page v Tuesday, February 17, 2004 9:48 AM

3. Slide the display cover latch to the right (1) and open the display to a
comfortable viewing angle (2).
K3V-K3U.book Page vi Tuesday, February 17, 2004 9:48 AM

vi

4. Press and release the power switch to turn on the power. The POST (power-
on self-test) routine executes and Windows begins loading.

Note: To turn off the power, use the Windows Turn Off command to shut
down the computer. If you are unable to shut down your computer normally,
press and hold the power switch for more than four seconds to turn off the
computer. If you turn off the computer and want to turn it on again, wait at
least two seconds before powering up.
K3V-K3U.book Page vii Tuesday, February 17, 2004 9:48 AM

vii

Care and maintenance

Taking care of your computer

Your computer will serve you well if you take care of it.
• Do not expose the computer to direct sunlight. Do not place it near sources of
heat, such as a radiator.
• Do not expose the computer to temperatures below 0ºC (32ºF) or above 50ºC
(122ºF).
• Do not subject the computer to magnetic fields.
• Do not expose the computer to rain or moisture.
• Do not spill water or any liquid on the computer.
• Do not subject the computer to heavy shock and vibration.
• Do not expose the computer to dust and dirt.
• Never place objects on top of the computer to avoid damaging the computer.
• Never place the computer on uneven surfaces.

Taking care of your AC adapter

Here are some ways to take care of your AC adapter:
• Do not connect the adapter to any other device.
• Do not step on the power cord or place heavy objects on top of it. Carefully
route the power cord and any cables away from all potential traffic.
• When unplugging the power cord, do not pull on the cord itself but pull on the
plug.
• The total ampere ratings of the equipment plugged in should not exceed the
ampere rating of the cord if you are using an extension cord. Also, the total
current rating of all equipment plugged into a single wall outlet should not
exceed the fuse rating.

Taking care of your battery pack

Here are some ways to take care of your battery pack:
• Use only batteries of the same kind as replacements. Turn the power off
before removing or replacing batteries.
• Do not tamper with batteries. Keep them away from children.
• Dispose of used batteries according to local regulations. Recycle if at all
possible.
K3V-K3U.book Page viii Tuesday, February 17, 2004 9:48 AM

viii

Cleaning and servicing

When cleaning the computer, follow these steps:
1. Power off the computer and remove the battery pack.
2. Disconnect the AC adapter.
3. Use a soft cloth moistened with water. Do not use liquid or aerosol cleaners.
Contact your dealer or see your service technician if any of the following occurs:
• The computer has been dropped or the body has been damaged.
• Liquid has been spilled into the product.
• The computer does not operate normally.
K3V-K3U.book Page ix Tuesday, February 17, 2004 9:48 AM

Preface iii
Connecting the computer iii
Care and maintenance vii

Contents ix

1 Getting familiar with your computer 1

A tour of your computer 3
Top view 3
Left view 6
Right view 7
Rear view 8
Bottom view 9
Features 10
Display 12
Indicators 13
Keyboard 15
Special keys 15
Keyboard ergonomics 20
Touchpad 21
Launch keys 24
Storage 26
Hard disk 26
Optical drive 26
3-in-1 slot 27
Connectivity options 30
Ethernet and LAN 30
Fax/data modem 30
Fast infrared 31
Optional wireless communication 32
Audio 33
Super DJ control panel 34
Securing your computer 42
Security notch 42
Passwords 42

2 Operating on battery power 45

Battery pack 47
Battery pack characteristics 47
Installing and removing the battery pack 48
Charging the battery 49
K3V-K3U.book Page x Tuesday, February 17, 2004 9:48 AM

x Contents

Checking the battery level 50

Optimizing battery life 50
Battery-low warning 50
Power management 52
Advanced Configuration and Power Interface 52

3 Peripherals and options 53

External monitor 55
Using simultaneous display 55
S-video 56
Printer 57
PC Card 58
PC Card slot 58
USB devices 60
IEEE 1394 devices 61
Miscellaneous options 62
Key component upgrades 63
Memory upgrade 63

4 Moving with your computer 65

Disconnecting from the desktop 67
Moving around 68
Preparing the computer 68
What to bring to short meetings 68
What to bring to long meetings 68
Taking the computer home 69
Preparing the computer 69
What to bring with you 69
Special considerations 69
Setting up a home office 70
Traveling with the computer 71
Preparing the computer 71
What to bring with you 71
Special considerations 71
Traveling internationally with the computer 72
Preparing the computer 72
What to bring with you 72
Special considerations 72

5 Software 73
Launch Manager 75
BIOS Utility 76
K3V-K3U.book Page xi Tuesday, February 17, 2004 9:48 AM

xi

Security 77
Exit 80

6 Troubleshooting 81
Frequently-asked questions 83
Error messages 86

A Specifications 91

B Notices 97

Index 105
K3V-K3U.book Page xii Tuesday, February 17, 2004 9:48 AM

xii Contents
K3V-K3U.book Page 1 Tuesday, February 17, 2004 9:48 AM

1 Getting familiar with

your computer
K3V-K3U.book Page 2 Tuesday, February 17, 2004 9:48 AM

This notebook computer combines high-performance,

versatility, power management features and multimedia
capabilities with a unique style and ergonomic design. Work
with unmatched productivity and reliability with your new
power computing partner.
This chapter gives an in-depth "tour" of the computer’s many
features.
K3V-K3U.book Page 3 Tuesday, February 17, 2004 9:48 AM

A tour of your computer

Let us show you around your new notebook computer.

Top view
K3V-K3U.book Page 4 Tuesday, February 17, 2004 9:48 AM

4 1 Getting familiar with your computer

# Item Description

1 Power button Turns on the computer power.

2 Super DJ control Super DJ control panel for playing CDs, VCDs, DVDs
panel and MP3s. See “Super DJ control panel” on page 34
for more details. (Intel chipset model only)
K3V-K3U.book Page 5 Tuesday, February 17, 2004 9:48 AM

# Item Description

3 Touchpad Touch-sensitive pointing device which functions like a

computer mouse.

4 4-way scroll key This button mimics your cursor pressing on the
vertical and horizontal scroll bars of Windows
application.

5 Click buttons (left The left and right buttons function like the left and
and right) right mouse buttons.

6 Palm rest Comfortable support area for your hands when you use
the computer.

7 Keyboard Inputs data into your computer.

8 Fan slots Help keep the computer cool. Do not cover these slots
which promote proper airflow to the computer.

9 Launch keys Buttons for launching frequently-used programs. See

“Launch keys” on page 24 for more details.

10 Status indicators LEDs (light-emitting diodes) that turn on and off to

show the status of the computer and its functions and
components.

11 Display screen Also called LCD (liquid-crystal display), displays

computer output.
K3V-K3U.book Page 6 Tuesday, February 17, 2004 9:48 AM

6 1 Getting familiar with your computer

Left view

# Item Description

1 PC Card slots Accepts two Type II/I CardBus PC Card.

2 PC Card eject Ejects the PC Card from its slot.

buttons

3 3-in-1 slot media slot Accepts any of the following flash memory cards;
Secure Digital (SD), Memory Stick, MultiMediaCard
(MMC).

4 IEEE 1394 port Connects to an IEEE 1394-compatible device (e.g.,

digital video camera).

5 Infrared port Interfaces with infrared devices (e.g., infrared printer,

IR-aware computer).

6 Optical drive activity Lights up when the optical drive is active.

indicator

7 Eject button Ejects the CD/DVD tray.

8 Emergency eject slot Ejects the optical drive tray when the computer is
turned off. See page 84 for more details.

9 Optical drive Internal optical drive (CD, DVD, or DVD/CD-RW

combo drive).

10 Speaker Outputs sound.

K3V-K3U.book Page 7 Tuesday, February 17, 2004 9:48 AM

Right view

# Item Description

1 Speaker Outputs sound.

2 Floppy drive Internal diskette drive, accepts 3.5-inch floppy

diskettes. Available only for SiS chipset model.

3 Security keylock Connects to a Kensington-compatible computer

security lock.
K3V-K3U.book Page 8 Tuesday, February 17, 2004 9:48 AM

8 1 Getting familiar with your computer

Rear view

# Item Description

1 DC-in jack Connects to the AC adapter.

2 Parallel port Connects to a parallel device (e.g., parallel printer).

3 S-video out port Connects to a television or display device with S-

video input.

4 External monitor port Connects to a display monitor (up to 2048x1536

resolution).

5 USB (2.0) ports Connect to USB devices (e.g., USB mouse).

(four)

6 Network jack Connects to an Ethernet-based network.

7 Modem jack Connects a phone line (only for models with an

internal fax/data modem).

8 S/PDIF line-out jack Connects to audio line-out devices (e.g., speakers,

headphones); supports S/PDIF connections.
K3V-K3U.book Page 9 Tuesday, February 17, 2004 9:48 AM

# Item Description

9 Line-in jack Accepts audio line-in devices (e.g., audio CD player,

stereo walkman).

Bottom view

# Item Description

1 Memory Houses the computer’s main memory.

compartment cover

2 Battery pack Supplies power to the computer.

3 Battery release latch Unlatches the battery to remove the battery pack.
K3V-K3U.book Page 10 Tuesday, February 17, 2004 9:48 AM

10 1 Getting familiar with your computer

Features
This computer was designed with the user in mind. Here are just a few of its many
features:

Performance
• Intel® Pentium® 4 (up to 3.2 GHz) or Intel® Celeron® processor (SiS
chipset)
• Intel® Pentium® 4 or Intel® Celeron® processor (Intel chipset)
• 512KB Flash BIOS with boot block; shadow RAM support
• 15” SXGA+ LCD (Intel chipset), 15” TFT XGA LCD (SiS chipset)
• nVidia® high-performance graphics chipset with 64MB DDR graphic
memory and 8X AGP support (Intel chipset), or SiS graphic chipset (SiS
chipset)
• Memory upgradable to 1 GB with two PC 2700/3200 (333/400MHz DDR)
soDIMM slots
• Power management system

Multimedia
• Audio codec supports stereo at 18-bit ADC/20-bit DAC
• AC’97 2.2-compliant stereo audio
• Line-out jack with S/PDIF support
• Enhanced audio system with two speakers
• CD-ROM, DVD or DVD/CD-RW combo drive
• S-video output port
• Dual display capability
• Simultaneous LCD and CRT display
• Super DJ (Intel chipset only)

Connectivity
• High-speed fax/data software modem
• Onboard PCI 10/100 Mbps LAN
• Optional 802.11b/802.11g wireless LAN
K3V-K3U.book Page 11 Tuesday, February 17, 2004 9:48 AM

11

Human-centric design and ergonomics

• Full-sized keyboard
• Ergonomically-centered touchpad pointing device
• Launch keys

Expansion
• Upgradeable memory
• Secure Digital (SD)/Memory Stick/MultiMediaCard (MMC) 3-in-1 slot
• PC Card slots
K3V-K3U.book Page 12 Tuesday, February 17, 2004 9:48 AM

12 1 Getting familiar with your computer

Display
The graphics display offers excellent viewing, display quality and desktop-
performance graphics. The computer supports Thin-Film Transistor (TFT) liquid
crystal display (LCD) displaying vibrant colors at high resolution.

Simultaneous display
The computer’s crisp display and multimedia capabilities are great for viewing
movies or giving presentations. If you prefer, you can also connect an external
monitor when giving presentations. This computer supports simultaneous LCD
and CRT display. Simultaneous display allows you to control the presentation
from your computer and at the same time face your audience. You can also
connect other output display devices such as LCD projection panels for large-
audience presentations.

Power management
The power management system incorporates an "automatic LCD dim" feature that
automatically dims the LCD when the computer is not in use. See “Power
management” on page 52 for more information on power management features.

Opening and closing the display

To open the display, slide the display cover latch to the right and lift up the cover,
then tilt it to a comfortable viewing position. See “Connecting the computer” on
page iii. The computer employs a microswitch that turns off the display (e.g.,
enters standby mode) to conserve power when you close the display cover, and
turns it back on when you open the display cover.

Note: If an external monitor is connected, the computer turns off the display
(but does not enter standby mode) when you close the display cover.

To close the display cover, fold it down gently until the display cover latch clicks
into place.

Caution: To avoid damaging the display, do not slam it when you close it.
Also, do not place any object on top of the computer when the display is
closed.
K3V-K3U.book Page 13 Tuesday, February 17, 2004 9:48 AM

13

Indicators
The computer has seven easy-to-read status indicators (LEDs) under the display
screen.

# Function Description

1 Wireless Lights when the wireless LAN (optional) capabilities

communication are enabled.

2 Power Lights when the computer is on.

K3V-K3U.book Page 14 Tuesday, February 17, 2004 9:48 AM

14 1 Getting familiar with your computer

# Function Description

3 Standby Blinks when computer enters Hibernation mode.

4 Media activity Lights when the hard disk, or CD or DVD drive is

active.

5 Battery charge Lights when the battery is being charged.

6 Caps lock Lights when Caps Lock is activated.

7 Num lock Lights when Numeric Lock is activated.

K3V-K3U.book Page 15 Tuesday, February 17, 2004 9:48 AM

15

Keyboard
The keyboard has full-sized keys with an embedded keypad, separate cursor keys,
two Windows keys and twelve function keys.

Special keys

Lock keys

The keyboard has three lock keys which you can toggle on and off.

Lock Key Description

Caps Lock When Caps Lock is on, all alphabetic characters typed are in uppercase.

Num Lock When Num Lock is on, the embedded keypad is in numeric mode. The
(Fn-F11) keys function as a calculator (complete with the arithmetic operators +, -
, *, and /). Use this mode when you need to do a lot of numeric data
entry. A better solution would be to connect an external keypad. See
“USB devices” on page 60 for more informations.

Scroll Lock When Scroll Lock is on, the screen moves one line up or down when
(Fn-F12) you press ↑ or ↓ respectively. Scroll Lock does not work with some
applications.
K3V-K3U.book Page 16 Tuesday, February 17, 2004 9:48 AM

16 1 Getting familiar with your computer

Embedded numeric keypad

The embedded numeric keypad functions like a desktop numeric keypad. It is

indicated by small characters located on the upper right corner of the keycaps. To
simplify the keyboard legend, cursor-control key symbols are not printed on the
keys.

Desired Access Num Lock On Num Lock Off

Number keys on Type numbers in a normal

embedded keypad manner.

Cursor-control keys on Hold Shift while using cursor- Hold Fn while using
embedded keypad control keys. cursor-control keys.

Main keyboard keys Hold Fn while typing letters on Type the letters in a
embedded keypad. normal manner.

Note: If an external keyboard or keypad is connected to the computer, the

numlock feature automatically shifts from the internal keyboard to the
external keyboard or keypad.
K3V-K3U.book Page 17 Tuesday, February 17, 2004 9:48 AM

17

Windows keys

The keyboard has two keys that perform Windows-specific functions.

Key Description

Windows logo key Start button. Combinations with this key perform special
functions. Below are a few examples:

+ Tab (Activates next Taskbar button)

+ E (Explores My Computer)
+ F (Finds Document)
+ M (Minimizes All)
Shift + + M (Undoes Minimize All)
+ R (Displays Run dialog box)

Application key Opens the application’s context menu (same as right-click).

K3V-K3U.book Page 18 Tuesday, February 17, 2004 9:48 AM

18 1 Getting familiar with your computer

Hotkeys

The computer employs hotkeys or key combinations to access most of the

computer’s controls like screen contrast and brightness, volume output and the
BIOS setup utility.

HotKey Function Description

Fn-F1 Hotkey help Displays a list of the hotkeys and their functions.

Fn-F2 Sleep Puts the computer in Sleep mode, which can be

defined via the advanced section of the Power
Management Properties in the Windows Control
Panel.

Fn-F3 Display toggle Switches display output between the display

screen, external monitor (if connected) and both
the display screen and external monitor.

Fn-F4 Screen blank Turns the display screen backlight off to save
power. Press any key to return.

Fn-F5 Speaker on/off Turns the speakers on and off; mutes the sound.

Fn-PgUp Home Functions as the “Home” key.

Fn-PgDn End Functions as the “End” key.

K3V-K3U.book Page 19 Tuesday, February 17, 2004 9:48 AM

19

HotKey Function Description

Fn- → Brightness up Increases the screen brightness.

Fn- ← Brightness down Decreases the screen brightness.

Fn- ↑ Volume up Increases the volume.

Fn- ↓ Volume down Decreases the volume.

Activating hotkeys
When activating hotkeys, press and hold the Fn key before pressing the other key
in the hotkey combination.
K3V-K3U.book Page 20 Tuesday, February 17, 2004 9:48 AM

20 1 Getting familiar with your computer

Keyboard ergonomics
Located below the keyboard, the wide and curved palm rest is ergonomically
designed to provide you with a very comfortable place to rest your hands while
you type.
K3V-K3U.book Page 21 Tuesday, February 17, 2004 9:48 AM

21

Touchpad
The built-in touchpad is a pointing device that senses movement on its surface.
This means the cursor responds as you move your finger on the surface of the
touchpad. The central location on the palm rest provides optimum comfort and
support.
K3V-K3U.book Page 22 Tuesday, February 17, 2004 9:48 AM

22 1 Getting familiar with your computer

Touchpad basics
The following teaches you how to use the touchpad:

• Move your finger across the touchpad to move the cursor.

• Press the left (1) and right (3) buttons located on the edge of the touchpad to
K3V-K3U.book Page 23 Tuesday, February 17, 2004 9:48 AM

23

do selection and execution functions. These two buttons are similar to the left
and right buttons on a mouse. Tapping on the touchpad produces similar
results.
• Use the 4-way scroll (2) key (top/bottom/left/right) to scroll a page up, down,
left or right. This button mimics your cursor pressing on the vertical and
horizontal scroll bars of Windows applications.

Right 4-way scroll

Function Left button Tap
button key

Execute Click twice Tap twice (at the same

quickly speed as double-
clicking a mouse
button)

Select Click once Tap once

Drag Click and hold, Tap twice (at the same

then use finger speed as double-
to drag the clicking a mouse
cursor on the button) then hold
touchpad finger to the touchpad
on the second tap and
drag the cursor

Access Click
context once
menu

Scroll Click and

hold the
button in the
desired
direction
(up/down/
left/right)

Note: Keep your fingers dry and clean when using the touchpad. Also keep
the touchpad dry and clean. The touchpad is sensitive to finger movements.
Hence, the lighter the touch, the better the response. Tapping too hard will
not increase the touchpad’s responsiveness.
K3V-K3U.book Page 24 Tuesday, February 17, 2004 9:48 AM

24 1 Getting familiar with your computer

Launch keys
Located at the top of the keyboard are launch keys used to launch frequently used
applications.
K3V-K3U.book Page 25 Tuesday, February 17, 2004 9:48 AM

25

# Item Description

1 Email The mail button is used to launch the email

application.

2 Internet browser By default, is used to launch your internet browser.

3 TV out Automatically switches the display to output on a

television that is connected to the s-video port.

4 Resolution Launches the resolution setting.

5 Wireless communication This button is used to enable or disable the wireless

LAN (optional) function.

For more informations, see “Launch Manager” on page 75.

K3V-K3U.book Page 26 Tuesday, February 17, 2004 9:48 AM

26 1 Getting familiar with your computer

Storage
This computer supplies you with the following media storage:
• One high-capacity 2.5-inch hard disk
• Optical drive
• Secure Digital (SD)/Memory Stick/MMC (MultiMediaCard) 3-in-1 slot
• One 3.5-inch floppy drive (Available only for SiS chipset)

Hard disk
The high-capacity hard disk is the answer to your storage needs. This is where
your programs and data are stored.

Optical drive
A high-speed optical drive, CD-ROM, DVD or DVD/CD-RW combo gives you
portable multimedia. A DVD drive allows you to watch movies; a CD-RW drive
lets you burn CDs.

Inserting a disc
Press the eject button to eject the drive tray, and pull out the drive tray. Place a
disc on the spindle securely and close the drive tray.
K3V-K3U.book Page 27 Tuesday, February 17, 2004 9:48 AM

27

Note: When power is off, you can eject the optical drive tray using the
emergency eject hole. See page 84 for details.

Playing DVD movies

To play DVD movies in your computer, just insert the DVD disc into the drive and
the DVD movie will automatically play after a few seconds.

Important! When you launch the DVD player for the first time, the program
asks you to input the region code. DVD discs are divided into 6 regions.
Once your DVD drive is set to a region code, it will play DVD discs of that
region only. You can set the region code a maximum of five times (including
the first time), after which the last region code set will remain permanent.
Recovering your hard disk does not reset the number of times the region code
has been set. Refer to the table below for DVD movie region code
information.

Region code Country or region

1 U.S.A., Canada

2 Europe, Middle East, South Africa, Japan

3 Southeast Asia, Taiwan, Korea (South)

4 Latin America, Australia, New Zealand

5 Former U.S.S.R., parts of Africa, India

6 People's Republic of China

Note: To change the region code, insert a DVD movie of a different region
into the DVD-ROM drive. Please refer to the online help for more
information.

3-in-1 slot
The 3-in-1 slot can accommodate SD (Secure Digital) card, Memory Stick and
MMC (MultiMediaCard). These media are used in a variety of digital products
(e.g., digital cameras, cellular phones, digital music players, hand held PCs, etc.)
for data exchange.
K3V-K3U.book Page 28 Tuesday, February 17, 2004 9:48 AM

28 1 Getting familiar with your computer

Insert the SD or MMC card as shown in the illustration below.

To eject the card, gently push the card further into the slot to release it; then
remove the card from the slot.

Insert the Memory Stick as shown in the illustration below.

K3V-K3U.book Page 29 Tuesday, February 17, 2004 9:48 AM

29

To eject the Memory Stick, gently push the Memory Stick further into the slot to
release it; then remove it from the slot.

The procedure for inserting and ejecting a MultiMediaCard is the same as the SD
card.
K3V-K3U.book Page 30 Tuesday, February 17, 2004 9:48 AM

30 1 Getting familiar with your computer

Connectivity options
The computer has built-in features for connecting to a network and communicating
with other computers.

Ethernet and LAN

The built-in network feature allows you to connect your computer to an Ethernet-
based (10/100 Mbps) network.
To use the network feature, connect an Ethernet cable from the network jack on the
rear of the computer to a network jack or hub on your network.

Fax/data modem
The computer has a built-in fax/data modem (available in select countries).

Warning: This modem port is not compatible with digital phone lines.
Plugging this modem into a digital phone line will damage the modem.
K3V-K3U.book Page 31 Tuesday, February 17, 2004 9:48 AM

31

To use the fax/data modem port, connect a phone cable from the modem port to a
telephone jack.

Fast infrared
The computer’s fast infrared (FIR) port allows you to do wireless data transfer
with other IR-aware computers and peripherals such as PDAs (personal digital
assistants), mobile phones, and infrared printers. The infrared port can transfer
data a speeds of up to four megabits per second (Mbps) at a distance of up to one
meter.
K3V-K3U.book Page 32 Tuesday, February 17, 2004 9:48 AM

32 1 Getting familiar with your computer

Optional wireless communication

This computer can be equipped with an optional wireless communication feature.
This feature allows you to communicate with other wireless communication
devices.
You can manually turn off your wireless communication feature.
K3V-K3U.book Page 33 Tuesday, February 17, 2004 9:48 AM

33

Audio
Your computer includes 16-bit high-fidelity stereo audio. Two speakers on both
sides of the computer ensure that when the LCD panel is closed, the audio is not
muffled.

There are also audio ports on the rear panel of the computer. See “Rear view” on
page 8 for more informations.
K3V-K3U.book Page 34 Tuesday, February 17, 2004 9:48 AM

34 1 Getting familiar with your computer

Super DJ control panel

The Super DJ control panel (Intel chipset only) is a special feature of this
computer. Through this Super DJ control panel, you can play most of your audio/
video CDs, DVDs, MP3s, and MP3 files on your hard disk.
When the operating system is not running, you can play music CDs and MP3 files
on your hard disk. You must first set up the playlist in the Playlist Editor before
you can play the MP3 files and CDs.You can set up more than one playlist in your
hard disk.

# Item Description

1 Volume down Decrease the volume of the speakers.

2 Volume up Increase the volume of the speakers

K3V-K3U.book Page 35 Tuesday, February 17, 2004 9:48 AM

35

# Item Description

3 Previous track button Jumps to the previous track in the playlist. When
viewing DVD or VCD movies, lets you jump to the
previous chapter.

4 Next track button Jumps to the next track in the playlist. When
viewing DVDs or VCDs, lets you jump to the next
chapter.

5 Stop/Eject/Media select Stops playback, ejects the CD or selects the media

button source. Press once to stop the music being played,
press again to enter media select mode. Up to a
maximum of 9 playlists on the hard disk are
supported, P1 to P9. For audio CD, D1 is the
displayed media source.

6 Super DJ LCD panel Displays current media status.

7 Play/pause Plays and pauses the media playback.

8 Super DJ power button Turns on or off the power of the Super DJ control
panel.

Note: When the operating system is not running, the Super DJ panel cannot
play a DVD or VCD movie. When the operating system is running, the Super
DJ panel only supports PowerDVD.
K3V-K3U.book Page 36 Tuesday, February 17, 2004 9:48 AM

36 1 Getting familiar with your computer

Understanding the Super DJ LCD panel

The Super DJ LCD panel displays all the information pertaining to the audio/video
media that’s being played in the computer.

# Item Description

1 Playback status Displays if the track is playing or in pause mode.

2 Optical disk Your media is being accessed via the optical drive.

3 Track number/ Displays the track number currently playing or the

Playlist number playlist number. Up to 99 songs are supported by the
playlist/track number.

4 Stop status Stops playback or enter/exit playlist selection mode.

5 Hard disk Your media is being accessed via the hard disk.

Setting up the Playlist Editor

Before setting up the Playlist Editor, one or more of the following conditions
should be present:
• An audio CD or CD containing MP3 files in the optical drive.
• Folder inside your hard disk containing MP3 files.
• User’s playlists created with your audio player (Windows MediaPlayer,
MusicMatch, WinAmp, etc.) containing MP3 files. See you audio player help
for instructions on how to create playlist.

Adding Playlist
To add a playlist to the Playlist Editor, follow the instructions below:
K3V-K3U.book Page 37 Tuesday, February 17, 2004 9:48 AM

37

1. Open the Playlist Editor application and click on the add button.
2. Click on play list or folder to open a dialog box.
3. Locate the available playlist or folder containing MP3 files in your hard disk.
Highlight the selected playlist or folder and click on Select. Click on OK to
confirm and add your selection to the Playlist Editor.
• playlist
K3V-K3U.book Page 38 Tuesday, February 17, 2004 9:48 AM

38 1 Getting familiar with your computer

• folder

4. The import button is used to import playlists from your audio player
(Windows Media Player 7.1 or higher, Winamp 2.x or higher or Music Match
6.x or higher). The Playlist Editor supports up to 9 playlists.

Note: If your default audio player is Winamp or Music Match, clicking on

import will instantly add the playlist from your default audio player to the
K3V-K3U.book Page 39 Tuesday, February 17, 2004 9:48 AM

39

Playlist Editor. If your default audio player is Windows Media Player,

clicking on import will display the library of playlists available. The user can
then add one of the chosen playlists displayed in the library to the Playlist
Editor.

5. The edit button is used to add MP3 files into the selected playlist. The edit
button in your Playlist Editor is only available if the selected playlist is an
audio player playlist and not a folder.

6. The remove button is used to remove MP3 files from an existing playlist or
remove an existing playlist from the Playlist Editor.
You can arrange the order of playlist in the Playlist Editor by selecting one and
then dragging it to the appropriate location.

Using the Super DJ control panel to play audio files

After you have set up your playlist in your Playlist Editor, you can now use the
Super DJ to play your audio files from the hard disk or optical drive. To play MP3
files from your hard disk while the operating system is not running, follow the
instructions below:
1. Press to turn the Super DJ on.
K3V-K3U.book Page 40 Tuesday, February 17, 2004 9:48 AM

40 1 Getting familiar with your computer

2. The LCD screen will display track 1 of playlist 1 (P1). This is the default
setting. Follow the instruction below:

Description Action

Play Press and release

Pause playback Press and release while the music is playing

Stop Press and release while the music is

playing

Go to next track Press and release

Go to previous track Press and release

Scan forward the current track Press and hold

Scan backward the current track Press and hold

3. To select another playlist, press to stop the currently playing track. Press the
again to enter media select mode. The current playlist will be displayed in the
Super DJ LCD screen. Press to go to the next playlist or to the previous
playlist.

4. When the playlist you want to select is displayed in the LCD screen, press
to confirm the selection and go to track selection mode. Track number 1 will be
displayed in the LCD screen. Then follow the table in step 3 on what you want to do
next.
K3V-K3U.book Page 41 Tuesday, February 17, 2004 9:48 AM

41

Adjusting the volume

There are many ways to adjust the volume of the computer. You use the taskbar to
control the volume. You can also use the volume hotkeys.
K3V-K3U.book Page 42 Tuesday, February 17, 2004 9:48 AM

42 1 Getting familiar with your computer

Securing your computer

Security features include hardware and software locks — a security notch and
password.

Security notch
A security notch located on the right panel of the computer lets you connect a
Kensington-compatible computer security lock.

Wrap a computer security lock cable around an immovable object such as a table
or locked drawer handle. Insert the lock into the notch and turn the key to secure
the lock. Some keyless models are also available.

Passwords
Passwords protect your computer from unauthorized access. When set, no one can
access the computer without entering the correct password.
There are three types of passwords you can set:
• Supervisor Password secures your computer against unauthorized entry to
and use of the BIOS Utility.
• User Password secures your computer against unauthorized use.
• Hard Disk Password protects your data by preventing unauthorized access to
your hard disk.
See “BIOS Utility” on page 76 for details.

Important: Do not forget your Setup and Hard Disk password! If you forget
your password, please get in touch with your dealer or an authorized service
center.
K3V-K3U.book Page 43 Tuesday, February 17, 2004 9:48 AM

43

Setting a password
You can set the password using the BIOS Utility. See “Setting a password” on
page 78.
K3V-K3U.book Page 44 Tuesday, February 17, 2004 9:48 AM

44 1 Getting familiar with your computer

K3V-K3U.book Page 45 Tuesday, February 17, 2004 9:48 AM

2 Operating on
battery power
K3V-K3U.book Page 46 Tuesday, February 17, 2004 9:48 AM

The computer operates on AC or battery power. This chapter

contains the information you need to know to operate the
computer on battery power. It also includes information on
how your computer manages and saves power.
K3V-K3U.book Page 47 Tuesday, February 17, 2004 9:48 AM

47

Battery pack
The computer uses a battery pack that gives you long use between charges.

Battery pack characteristics

The battery pack has the following characteristics:
• Employs current battery technology standards
The computer uses a Lithium-Ion battery pack which does not have the
memory effect problem of Nickel Cadmium (NiCd) batteries. Li-Ion
batteries consistently provide the longest battery life, best-suited for road
warriors.
• Battery-low warning
When the battery charge level becomes low, the status indicator of the
computer flashes at regular intervals. This tells you that the battery power is
critically low (and you should save your work). You can correct this situation
by recharging the battery pack.
Whenever possible, use the AC adapter. The battery will come in handy when you
travel or during a power failure. It is advisable to have an extra fully-charged
battery pack available as backup.

Using a battery pack for the first time

When using a battery pack for the first time, follow these steps:
1. Connect the AC adapter to a power source and to the computer and fully
recharge the battery.
2. Disconnect the adapter to use up the battery before recharging again.
You only need to do this once or twice with a new battery or with a battery that's
been stored without being used for a long time. If the computer is to be stored for
more than two weeks, we suggest you remove the battery pack. Battery power
from a fully charged battery pack depletes in roughly a day with the computer in
Standby mode, a month in Hibernation mode or when power is off.

Warning! Do not expose battery packs to temperatures below 0ºC (32ºF) or

above 60ºC (140ºF). This may adversely affect the battery pack.
K3V-K3U.book Page 48 Tuesday, February 17, 2004 9:48 AM

48 2 Operating on battery power

Installing and removing the battery pack

Important! Before removing the battery pack, make sure that you have an
AC adapter connected to the computer; otherwise, turn off the computer.

To install a battery pack:

Insert the battery and align the arrows (1); slide the battery (2) until it clicks into
place.
K3V-K3U.book Page 49 Tuesday, February 17, 2004 9:48 AM

49

To remove the battery pack:

Slide and hold the lock/unlock latch into the unlock position (1); slide the battery
pack as shown in the illustration and lift the battery pack to remove it (2, 3).

Charging the battery

To charge the battery, install the battery pack and plug the AC adapter into the
computer and an electrical outlet.

Charging modes
The adapter has two charging modes:
• Rapid mode
The computer uses rapid charging when power is turned off and a powered
AC adapter is connected to it. In rapid mode, a fully depleted battery gets
95% charged in approximately 2 hours.
• Charge-in-use mode
When the computer is in use with the AC adapter plugged in, the computer
also charges the battery pack if installed. This mode will take longer to fully
charge a battery than rapid mode. In charge-in-use mode, a fully depleted
battery gets 95% charged in approximately 8 hours.
K3V-K3U.book Page 50 Tuesday, February 17, 2004 9:48 AM

50 2 Operating on battery power

Note: We suggest that you charge the battery pack before retiring for the day,
letting it charge overnight before traveling. This ensures a fully charged
battery for use the next day.

Checking the battery level

The Windows battery meter indicates the present battery level. Simply rest your
cursor on the battery meter (or AC plug) icon on the taskbar to see the present
charge level of your battery.

Optimizing battery life

This section helps you get the most out of battery operation. Optimizing battery
life prolongs the charge/recharge cycle and improves recharge efficiency. Follow
these suggestions to optimize and maximize battery power:
• Purchase an extra battery pack.
• Use the AC adapter whenever possible so that the battery is reserved for on-
the-go computing.
• Keep the battery pack in the computer powered by the AC adapter. The
constant trickle charge maintains the battery level to eliminate the battery
self-discharge effect. The charge-in-use function also charges the battery
pack.
• Eject the PC card from the card slot when it is not in use, since the PC card
draws extra power. See “Ejecting a card” on page 59.
• Store the battery pack in a cool, dry place. The recommended storage
temperature for battery packs ranges from 10 to 30 degrees Celsius. The
higher the storage temperature, the faster the battery pack self-discharges.
• The batteries can be recharged about 400 times when used as directed.
Excessive recharging decreases battery life.
• Take care of your battery pack and AC adapter. See “Care and maintenance”
on page vii of the preface.

Battery-low warning
You never have to worry about battery power as long as you are using the AC
adapter. However, when you operate the computer on battery power, pay extra
attention to the power indicator on the display panel.
During a battery-low condition, the power indicator flashes at regular intervals
until battery power is depleted.
K3V-K3U.book Page 51 Tuesday, February 17, 2004 9:48 AM

51

Warning! Connect the AC adapter to the computer as soon as possible. Data

is lost when computer power is cut off during Standby mode.

The following table shows the recommended course of action to take when you
encounter a battery-low condition.

Situation Recommended Action

AC adapter and power 1. Connect the AC adapter to the computer.

outlet available 2. Save all necessary files.
3. Resume work.
Power off the computer if you wish to recharge the battery
rapidly.

An extra fully-charged 1. Save all necessary files.

battery pack available 2. Exit the application.
3. Power off the computer.
4. Replace the battery pack.
5. Power on the computer and resume work.

AC adapter or power 1. Save all necessary files.

outlet not available 2. Exit the application.
3. Power off the computer.
K3V-K3U.book Page 52 Tuesday, February 17, 2004 9:48 AM

52 2 Operating on battery power

Power management
This computer has a built-in power management unit that monitors system activity.
System activity refers to any activity involving one or more of the following
devices: keyboard, mouse, floppy drive, hard disk, peripherals connected to the
serial and parallel ports, and video memory. If no activity is detected for a period
of time (called an inactivity timeout), the computer stops some or all of these
devices in order to conserve energy.
This computer employs a power management scheme that supports ACPI
(Advanced Configuration and Power Interface) which allows for maximum power
conservation and maximum performance at the same time. Windows handles all
power-saving chores for your computer.

Advanced Configuration and Power Interface

Advanced Configuration and Power Interface (ACPI) is a power management
specification jointly developed by Compaq, Intel, Microsoft, Phoenix and Toshiba.
ACPI enables Windows to control the amount of power given to each device
attached to the computer. With ACPI, Windows can turn off peripheral devices
when they are not in use, thereby saving power.

Note: We recommend you enable power management to prolong your

battery life.

Refer to Windows help for more details.

K3V-K3U.book Page 53 Tuesday, February 17, 2004 9:48 AM

3 Peripherals and
options
K3V-K3U.book Page 54 Tuesday, February 17, 2004 9:48 AM

Your computer offers excellent expansion capabilities

with its built-in ports, connectors and bays. This
chapter describes how to connect peripherals and
hardware options that help you use your computer
with ease. When connecting peripherals, read the
manual included with the peripheral for operating
instructions. You can purchase most of these and other
options directly from authorized dealers.
This chapter also includes sections on how to upgrade
key components. Key component upgradeability
helps keep your computer in step with the latest
technology.
K3V-K3U.book Page 55 Tuesday, February 17, 2004 9:48 AM

55

External monitor
You can connect an external monitor to the external monitor port. Read the
monitor manual for additional instructions.

Note: If an external monitor is not connected, closing the display cover puts
the computer into Standby mode.

Using simultaneous display

Your computer takes advantage of Windows multi-display capability, allowing
you to use your computer for presentation purposes. So whatever is displayed in
your computer will likewise be displayed on the other external display.
To use simultaneous display, you can choose to connect other display devices to
the computer through the external monitor port.
K3V-K3U.book Page 56 Tuesday, February 17, 2004 9:48 AM

56 3 Peripherals and options

S-video
The S-video port allows you to display the output to a television or a display
device that supports S-video input. This is useful if you want to do some
presentations or watch movies on a bigger screen.
K3V-K3U.book Page 57 Tuesday, February 17, 2004 9:48 AM

57

Printer
You can connect a printer to the parallel port. You can also connect a USB printer
to the USB port. See your printer manual for operating instructions.
K3V-K3U.book Page 58 Tuesday, February 17, 2004 9:48 AM

58 3 Peripherals and options

PC Card
The computer has built-in CardBus PC Card slots that can accommodate two Type
II/I PC Card. Please consult your dealer for PC Card options available that you can
purchase for your computer.

PC Card slot
The CardBus PC Card slots found on the left panel of the computer accepts credit-
card-sized cards that enhance the usability and expandability of the computer.
PC Cards (formerly PCMCIA) are add-on cards for portable computers, giving
you expansion possibilities long afforded by desktop PCs. Popular type II cards
include flash memory, SRAM, fax/data modem, LAN and SCSI cards. CardBus
improves on the 16-bit PC card technology by expanding the data path to 32 bits.

Note: Refer to your card’s manual for details on how to install and use the
card and its functions.

Inserting a card
Insert the card into the slot and make the proper connections (e.g., network cable),
if necessary. See your card manual for details.
K3V-K3U.book Page 59 Tuesday, February 17, 2004 9:48 AM

59

Ejecting a card
Before ejecting a PC Card:
• Exit the application using the card.
• Left-click on the Safely Remove Hardware icon on the taskbar and stop the
card operation.
Press the slot eject button once to pop it out (1); then press it again (1) to eject the
PC Card (2).
K3V-K3U.book Page 60 Tuesday, February 17, 2004 9:48 AM

60 3 Peripherals and options

USB devices
The computer has four USB (Universal Serial Bus) 2.0 ports located on the rear
panel, that allow you to connect peripherals without occupying too many
resources. USB 2.0 is the next-generation USB standard that offers faster transfer
rates and is, at the same time, backward compatible with USB 1.1. Common USB
devices include a mouse, keyboard, and digital camera.

Some USB devices require you to stop the device before disconnecting it from the
system. Before disconnecting a USB device, make sure the device is not being
used; then select the Safely Remove Hardware icon on the taskbar and click the
appropriate device.
K3V-K3U.book Page 61 Tuesday, February 17, 2004 9:48 AM

61

IEEE 1394 devices

The computer's fast IEEE 1394 ports allow you to connect IEEE 1394 supported
devices like a digital video camera or optical drive.

See your peripheral's documentation for details.

Before disconnecting any IEEE 1394 device, make sure the device is not being
used; then select the Safely Remove Hardware icon on the taskbar and click the
appropriate device.
K3V-K3U.book Page 62 Tuesday, February 17, 2004 9:48 AM

62 3 Peripherals and options

Miscellaneous options
AC adapter
The compact AC adapter supplies power to your computer. You can order a spare
AC adapter so you do not need to carry it from the office to your home or
destination.

Additional Li-Ion battery pack

It is good practice to have a spare battery around, especially when you travel. The
Li-Ion battery, coupled with the power management features of your computer,
supplies you with more power on-the-go.
K3V-K3U.book Page 63 Tuesday, February 17, 2004 9:48 AM

63

Key component upgrades

Your computer delivers superior power and performance. However, some users
and the applications they use may demand more. This computer allows you to
upgrade key components when you need increased performance.

Note: Contact your authorized dealer if you decide to perform a key

component upgrade.

Memory upgrade
This notebook computer comes with two PC2700 333MHz/PC3200 400MHz
DDR soDIMM (Small Outline Dual Inline Memory Module) sockets that accept
128/256/512 MB modules. Please consult your dealer if you need to add more
memory.
K3V-K3U.book Page 64 Tuesday, February 17, 2004 9:48 AM

64 3 Peripherals and options

K3V-K3U.book Page 65 Tuesday, February 17, 2004 9:48 AM

4 Moving with your

computer
K3V-K3U.book Page 66 Tuesday, February 17, 2004 9:48 AM

This chapter gives you tips and hints on things to

consider when moving around or traveling with
your computer.
K3V-K3U.book Page 67 Tuesday, February 17, 2004 9:48 AM

67

Disconnecting from the desktop

Follow these steps to disconnect your computer from external accessories:
1. Save your work in progress.
2. Shut down the operating system.
3. Turn off the computer.
4. Disconnect the cord from the AC adapter.
5. Disconnect the keyboard, pointing device, printer, external monitor, and other
external devices.
6. Disconnect the Kensington lock if you are using one to secure the computer.
K3V-K3U.book Page 68 Tuesday, February 17, 2004 9:48 AM

68 4 Moving with your computer

Moving around
when you are just moving within short distances, for example, from your office
desk to a meeting room

Preparing the computer

Before moving the computer, close and latch the display cover to place it in
Standby mode. You can now safely take the computer anywhere you go within the
building.
To bring the computer out of Standby mode, open the display.

What to bring to short meetings

A fully charged battery runs the computer for 2 hours under most circumstances. If
your meeting is shorter than that, you probably do not need to bring anything with
you other than the computer.

What to bring to long meetings

If your meeting will last longer than 2 hours or if your battery is not fully charged,
you may want to bring the AC adapter with you to plug in your computer in the
meeting room.
If the meeting room does not have an electrical outlet, reduce the drain on the
battery by putting the computer in sleep mode. Press Fn-F2 or close the display
cover whenever you are not actively using the computer. Then tap any key or open
the display to resume.
K3V-K3U.book Page 69 Tuesday, February 17, 2004 9:48 AM

69

Taking the computer home

when you are moving from your office to your home or vice versa

Preparing the computer

After disconnecting the computer from your desktop, follow these steps to prepare
the computer for the trip home:
1. Remove all media from the drives. Failure to remove the media can damage
the drive head.
2. Pack the computer in a protective case that can prevent the computer from
sliding around and cushion it if it should fall.

Caution: Avoid packing items next to the top cover of the computer.
Pressure against the top cover could damage the screen.

What to bring with you

Unless you already have some items at home, bring the following items with you:
• AC adapter and power cord
• The printed user’s manual

Special considerations
Follow these guidelines to protect your computer while traveling to and from
work:
• Minimize the effect of temperature changes by keeping the computer with
you.
• If you need to stop for an extended period of time and cannot bring the
computer with you, leave the computer in the trunk of the car to avoid
exposing the computer to excessive heat.
• Changes in temperature and humidity can cause condensation. Allow the
computer to return to room temperature, and inspect the screen for
condensation before turning on the computer. If the temperature change is
greater than 18°F (10°C), allow the computer to come to room temperature
slowly. If possible, leave the computer for 30 minutes in an environment with
a temperature between outside and room temperature.
K3V-K3U.book Page 70 Tuesday, February 17, 2004 9:48 AM

70 4 Moving with your computer

Setting up a home office

If you frequently work on your computer at home, it may be worthwhile to
purchase a second AC adapter for use at home. With a second AC adapter, you
can avoid transporting the extra weight to and from home.
If you use your computer at home for significant periods of time, you might also
want to add an external keyboard, monitor, or mouse.
K3V-K3U.book Page 71 Tuesday, February 17, 2004 9:48 AM

71

Traveling with the computer

when you are moving within a larger distance, for instance, from your office
building to a client’s office building or traveling locally

Preparing the computer

Prepare the computer as if you were taking it home. Be sure the battery in the
computer is charged. Airport security may require you to turn on your computer
when bringing it into the gate area.

What to bring with you

Bring the following items with you:
• AC adapter
• Spare, fully charged battery packs
• Additional printer driver files if you plan to use another printer

Special considerations
In addition to the guidelines for taking the computer home, follow these guidelines
to protect your computer while traveling:
• Always take the computer as carry-on luggage.
• If possible, have the computer inspected by hand. The computer can safely
pass through security X-ray machines, but never expose the computer to a
metal detector.
• Avoid exposing floppy disks to hand-held metal detectors.
K3V-K3U.book Page 72 Tuesday, February 17, 2004 9:48 AM

72 4 Moving with your computer

Traveling internationally with the

computer
when you are moving from country to country

Preparing the computer

Prepare the computer as you would normally prepare it for traveling.

What to bring with you

Bring the following items with you.
• AC adapter
• Power cords that are appropriate to the country to which you are traveling
• Spare, fully charged battery packs
• Additional printer driver files if you plan to use another printer

Special considerations
Follow the same special considerations as when traveling with the computer. In
addition, these tips are useful when traveling internationally.
• When traveling in another country, check that the local AC voltage and the
AC adapter power cord specifications are compatible. If not, purchase a
power cord that is compatible with the local AC voltage (e.g., power rating).
Do not use converter kits sold for appliances to power the computer.
• If you are using the modem, check if the modem and connector is compatible
with the telecommunication system of the country you are traveling in.
K3V-K3U.book Page 73 Tuesday, February 17, 2004 9:48 AM

5 Software
K3V-K3U.book Page 74 Tuesday, February 17, 2004 9:48 AM

This chapter discusses the important system utilities

bundled with your computer.
K3V-K3U.book Page 75 Tuesday, February 17, 2004 9:48 AM

75

Launch Manager
Launch Manager allows you to set the four launch keys and the wireless button
located above the keyboard. See “Launch keys” on page 24 for the location of
these keys.

You can access the Launch Manager by clicking on Start, Programs, and then
Launch Manager to start the application.
K3V-K3U.book Page 76 Tuesday, February 17, 2004 9:48 AM

76 5 Software

BIOS Utility
The BIOS Utility is a hardware configuration program built into your computer’s
BIOS (basic input/output system).
Your computer is already properly configured and optimized, and you do not need
to run this utility. However, if you encounter configuration problems, you may
need to run it. Please also refer to Chapter 6, Troubleshooting when a problem
arises.
To activate the BIOS Utility, press F2 during POST.

PhoenixBIOS Setup Utility

Information Main Advanced Security Boot Exit

CPU Type Intel (R)Pentium(R)4 CPU 2.40 GHz

CPU Speed 2.40 Ghz
System Memory: 640 KB
Extended Memory: 128000 KB
HDD1 Serial Number XXXXXX
System BIOS Version RX-XXX
VGA BIOS Version X.XX.XX.XX.XX
KBC Version XX.XX.XX
Serial Number XXXXXXXXXXXXXXXXX
Product Name
Manufacture Name Wistron
UUID Number 00000000-0000-0000-0000-000000000000

F1 Help Select Item F5/F6 Change Values F9 Setup Defaults

Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit

Note: The screen above is for reference only. Actual values may differ.

Navigating the BIOS Utility

These are the menu options: Information, Main, Advanced, Security, Boot and
Exit.
To enter a menu, highlight the item using the ← → keys.
Within a menu, navigate through the BIOS Utility by following these instructions:
• Press the cursor up/down keys (↑↓) to select item.
• Press the F5/F6 to change the value of a parameter.
• Press Enter to go to sub-menu.
• Press Esc while you are in any of the menu options to return to the main menu
K3V-K3U.book Page 77 Tuesday, February 17, 2004 9:48 AM

77

Note: You can change the value of a parameter if it is enclosed in square

brackets. Navigation keys for a particular menu are shown on the bottom of
the screen.

When you select an item in the BIOS Utility, the function description will appear
at the right side of the screen.

Caution: Some parameters in the BIOS Utility screens are for advanced
users only. Typically, you do not need to change the values in the screen
because these values are already optimized.

Security
The System Security screen contains parameters that help safeguard and protect
your computer from unauthorized use.
K3V-K3U.book Page 78 Tuesday, February 17, 2004 9:48 AM

78 5 Software

The table below describes the parameters in this screen. Settings in boldface are
the default and suggested parameter settings.

Parameter Description

Setup Supervisor When set, this password protects the BIOS Utility from
Password unauthorized entry, and protects critical BIOS parameters.
Press Enter to set this password.

Set User Password When set, this password protects the computer from
unauthorized entry during boot-up or resume from Hibernation
mode.
Press Enter to set this password.

Password on Boot When enabled, a password is requested when the system boots
up.
Options: Enabled or Disabled

Set Primary Hard When set, this password prevents the primary hard disk from
Disk Password unauthorized access. It consists of 8 alphanumeric characters.
Press Enter to set this password.

Processor Serial Controls detection of processor serial number.

Number Options: Enabled or Disabled

Note: Don’t forget your password. If you forget your password, you
may have to return your notebook computer to your dealer to reset it.

Setting a password
Follow these steps:
1. Use the ↑ and ↓ keys to highlight a password parameter (Supervisor, User,
Boot, or Hard Disk) and press the Enter key. The password box appears:

2. Type a password. The password may consist of up to eight alphanumeric

characters (A-Z, a-z, 0-9). Press Enter.
K3V-K3U.book Page 79 Tuesday, February 17, 2004 9:48 AM

79

Important: Be very careful when typing your password because the

characters do not appear on the screen.

3. Retype the password to verify your first entry and press Enter.
After setting the password, the computer automatically sets the chosen
password parameter to Present and a dialog box appears confirming the
changes.

4. Press Esc to return to the main menu.

Changing a password
To change a password, follow the steps in “Setting a password” on page 78. Enter
the current password and then enter a new password.

Removing a password
To remove a password, follow the steps in “Setting a password” on page 78. Enter
the current password and then leave the Enter New Password and Confirm New
Password blank.
K3V-K3U.book Page 80 Tuesday, February 17, 2004 9:48 AM

80 5 Software

Exit
To exit the BIOS Utility, go the Exit screen and choose an item and press Enter.
Press Enter again to confirm the selection.
K3V-K3U.book Page 81 Tuesday, February 17, 2004 9:48 AM

6 Troubleshooting
K3V-K3U.book Page 82 Tuesday, February 17, 2004 9:48 AM

This chapter instructs you on how to deal with

common system problems. Read it before calling a
technician if a problem occurs. Solutions to more
serious problems require opening up the computer.
Do not attempt to open and service the computer by
yourself. Contact your dealer or an authorized
service center for assistance.
K3V-K3U.book Page 83 Tuesday, February 17, 2004 9:48 AM

83

Frequently-asked questions
This is a list of possible situations that may arise during the use of your computer,
and it gives easy answers and solutions to these questions.

I press the power switch, but the computer does not start or boot-up.
Look at the Power indicator:
• If it is not lit, no power is being applied to the computer. Check the
following:
• Make sure the AC adapter is plugged in properly to the computer and to
the power outlet.
• If it is lit, check if the Standby indicator is lit, the computer is in Standby
mode. Press any key or tap on the touchpad to resume.

Nothing appears on the screen.

The computer’s power management system automatically blanks the screen to
save power. Press any key to turn the display back on.
If pressing a key does not turn the display back on, two things might be the cause:
• The brightness level might be too low. Press Fn-← and Fn-→ to adjust the
brightness level.
• The display device might be set to an external monitor. Press the display
toggle hot key Fn-F3 to toggle the display back to the computer.

Image is not full-screen.

Make sure the resolution is set to a resolution your system supports. Right-click
on your Windows desktop and select Properties to bring up the Display Properties
dialog box. Then click on the Settings tab to make sure the resolution is set to the
appropriate resolution. Resolutions lower than the specified resolution are not
full-screen on the computer or on an external monitor.

No audio comes out from the computer.

Check the following:
• The volume may be muted. In Windows, look at the volume control icon on
the taskbar. If it is crossed-out, click on the icon and deselect the Mute
option.
• The speakers may be turned off. Press Fn-F5 to turn the speakers on (this
hotkey also turns the speakers off).
K3V-K3U.book Page 84 Tuesday, February 17, 2004 9:48 AM

84 6 Troubleshooting

• The volume level may be too low. Adjust the level using the volume hotkeys.
In Windows, look at the volume control icon on the taskbar. Click on the icon
and adjust the level.
If headphones, earphones or external speakers are connected to the line-out port on
the computer’s rear panel, the internal speakers automatically turn off.

External microphone does not work.

Check the following:
• Make sure the external microphone is connected to the line-in jack on the
computer’s rear panel.
• If you cannot hear playback, the speakers may be muted.

How do I eject the optical drive tray with the computer turned off?
There is a mechanical eject slot on the optical drive. Simply insert the tip of a pen
or paperclip and push to eject the optical drive tray.

The keyboard does not respond.

Try attaching an external keyboard to the USB connector on the computer’s rear.
If it works, contact your dealer or an authorized service center as the internal
keyboard cable may be loose.

The printer does not work.

Check the following:
• Make sure that the printer is connected to a power outlet and it is turned on.
• Make sure the printer cable is connected securely to the computer’s USB or
K3V-K3U.book Page 85 Tuesday, February 17, 2004 9:48 AM

85

parallel port and the corresponding port on the printer.

I want to set up my location to use the internal modem.

To properly use your communications software (e.g., HyperTerminal), you need to
set up your location:
1. Open the Windows Control Panel and double-click on the Phone and
Modems Option.
2. Begin setting up your location.
Refer to the Windows manual.
K3V-K3U.book Page 86 Tuesday, February 17, 2004 9:48 AM

86 6 Troubleshooting

Error messages
The following is a list of the messages that the BIOS can display. Most of them
occur during POST. Some of them display information about a hardware device,
e.g., the amount of memory installed. Others may indicate a problem with a
device, such as the way it has been configured. Following the list are explanations
of the messages and remedies for reported problems.

Note: If your system displays one of the messages marked below with an
asterisk (*), write down the message and contact your dealer. If your system
fails after you have made the changes in the Setup menus, reset the computer,
enter Setup and load the Setup defaults to correct the error.

Error Messages Corrective Action

0200 Failure Fixed Disk Fixed disk is not working or not configured properly.
Check to see if fixed disk is attached properly. Run Setup.
Find out if the fixed-disk type is correctly identified.

0210 Stuck key Stuck key on keyboard.

0211 Keyboard error Keyboard not working.

0212 Keyboard Controller Keyboard controller failed test. May require replacing
Failed* keyboard controller.

0213 Keyboard locked - Unlock the system to proceed.

Unlock key switch

0220 Monitor type does not Monitor type not correctly identified in Setup
match CMOS - Run
SETUP

0230 Shadow Ram Failed Shadow RAM failed at offset nnnn of the 64k block at
at offset: nnnn* which the error was detected.

0231 System RAM Failed System RAM failed at offset nnnn of in the 64k block at
at offset: nnnn* which the error was detected.

0232 Extended RAM Extended memory not working or not configured properly
Failed at offset: nnnn* at offset nnnn.
K3V-K3U.book Page 87 Tuesday, February 17, 2004 9:48 AM

87

Error Messages Corrective Action

0250 System battery is The CMOS clock battery indicator shows the battery is
dead - Replace and run dead. Replace the battery and run Setup to reconfigure the
SETUP system.

0251 System CMOS System CMOS has been corrupted or modified

checksum bad - Default incorrectly, perhaps by an application program that
configuration used changes data stored in CMOS. The BIOS installed
Default Setup Values. If you do not want these values,
enter Setup and enter your own values. If the error
persists, check the system battery or contact your dealer.

0260 System timer error* The timer test failed. Requires repair of system board.

0270 Real time clock Real-Time Clock fails BIOS hardware test. May require
error* board repair.

0271 Check date and time BIOS found date or time out of range and reset the Real-
settings Time Clock. May require setting legal date (1991-2099).

0280 Previous boot Previous POST did not complete successfully. POST
incomplete - Default loads default values and offers to run Setup. If the failure
configuration used was caused by incorrect values and they are not corrected,
the next boot will likely fail. On systems with control of
wait states, improper Setup settings can also terminate
POST and cause this error on the next boot. Run Setup
and verify that the wait-state configuration is correct. This
error is cleared the next time the system is booted.

0281 Memory Size found Memory size found by POST differed from CMOS.
by POST differed from
CMOS

02B0 Diskette drive A Drive A: or B: is present but fails the BIOS POST diskette
error tests. Check to see that the drive is defined with the
02B1 Diskette drive B error proper diskette type in Setup and that the diskette drive is
attached correctly.

02B2 Incorrect Drive A Type of floppy drive A: not correctly identified in Setup.
type - run SETUP

02B3 Incorrect Drive B Type of floppy drive B: not correctly identified in Setup.
type - run SETUP
K3V-K3U.book Page 88 Tuesday, February 17, 2004 9:48 AM

88 6 Troubleshooting

Error Messages Corrective Action

02D0 System cache error - RAM cache failed and BIOS disabled the cache. On older
Cache disabled boards, check the cache jumpers. You may have to
replace the cache. See your dealer. A disabled cache
slows system performance considerably.

02F0: CPU ID: CPU socket number for Multi-Processor error.

02F4: EISA CMOS not ServerBIOS2 test error: Cannot write to EISA CMOS.
writeable*

02F5: DMA Test Failed* ServerBIOS2 test error: Cannot write to extended DMA
(Direct Memory Access) registers.

02F6: Software NMI ServerBIOS2 test error: Cannot generate software NMI
Failed* (Non-Maskable Interrupt).

02F7: Fail-Safe Timer NMI ServerBIOS2 test error: Fail-Safe Timer takes too long.
Failed*

device Address Conflict Address conflict for specified device.

Allocation Error for: device Run ISA or EISA Configuration Utility to resolve
resource conflict for the specified device.

Failing Bits: nnnn* The hex number nnnn is a map of the bits at the RAM
address which failed the memory test. Each 1 (one) in the
map indicates a failed bit. See errors 230, 231, or 232
above for offset address of the failure in System,
Extended, or Shadow memory.

Invalid System Problem with NVRAM (CMOS) data.

Configuration Data

I/O device IRQ conflict I/O device IRQ conflict error.

One or more I2O Block There was not enough room in the IPL table to display all
Storage Devices were installed I2O block-storage devices.
excluded from the Setup
Boot Menu

Operating system not found Operating system cannot be located on either drive A: or
drive C:. Enter Setup and see if fixed disk and drive A:
are properly identified.
K3V-K3U.book Page 89 Tuesday, February 17, 2004 9:48 AM

89

Error Messages Corrective Action

Parity Check 1 nnnn* Parity error found in the system bus. BIOS attempts to
locate the address and display it on the screen. If it cannot
locate the address, it displays nnnn. Parity is a method for
checking errors in binary data. A parity error indicates
that some data has been corrupted.

Parity Check 2 nnnn* Parity error found in the I/O bus. BIOS attempts to locate
the address and display it on the screen. If it cannot locate
the address, it displays nnnn.

Press <F1> to resume, Displayed after any recoverable error message. Press
<F2> to Setup, <F3> for <F1> to start the boot process or <F2> to enter Setup and
previous change the settings. Press <F3> to display the previous
screen (usually an initialization error of an Option ROM,
i.e., an add-on card). Write down and follow the
information shown on the screen.

Run the I2O Configuration One or more unclaimed block storage devices have the
Utility Configuration Request bit set in the LCT. Run an I2O
Configuration Utility (e.g. the SAC utility).

If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems
may be solved using the BIOS Setup Utility. See “BIOS Utility” on page 76.
K3V-K3U.book Page 90 Tuesday, February 17, 2004 9:48 AM

90 6 Troubleshooting
K3V-K3U.book Page 91 Tuesday, February 17, 2004 9:48 AM

A Specifications
K3V-K3U.book Page 92 Tuesday, February 17, 2004 9:48 AM

This appendix lists the general specifications

of your computer.
K3V-K3U.book Page 93 Tuesday, February 17, 2004 9:48 AM

93

Microprocessor
• Intel® Pentium® 4 (up to 3.2 GHz) or Intel® Celeron® processor (SiS
chipset)
• Intel® Pentium® 4 or Intel® Celeron® processor (Intel chipset)

Memory
• Memory upgradeable to 1 GB with two PC 2700/3200 (333/400MHz DDR)
soDIMM slots
• 512KB FLASH BIOS with boot block; shadow RAM support

Data storage
• One high-capacity, Enhanced-IDE hard disk
• CD-ROM, DVD or DVD/CD-RW combo drive
• SD/Memory Stick/MMC 3-in-1 slot
• One 3.5-inch floppy drive (available only for SiS chipset)

Display and video

• 15” SXGA+ (1400 x 1050) LCD (Intel chipset) or, 15” TFT (1024 x 768)
XGA LCD (SiS chipset)
• nVidia® high-performance graphics chipset with 64MB DDR graphic
memory and 8X AGP support (Intel chipset), or SiS graphic chipset (SiS
chipset)
• Simultaneous LCD and CRT display
• Dual display support

Audio
• Built-in speakers
• Sound Blaster Pro- and Windows Sound System-compatible
• Separate audio ports for line-in/microphone-in and line-out (S/PDIF) devices
• Super DJ (Intel chipset only)

Keyboard and pointing device

• 84-/85-/88-key Windows keyboard
• Ergonomically-centered touchpad pointing device
K3V-K3U.book Page 94 Tuesday, February 17, 2004 9:48 AM

94 A Specifications

I/O ports
• Two Type II/I CardBus PC Card slots
• One RJ-11 phone jack (V.90)
• One RJ-45 network jack (Ethernet 10/100)
• One DC-in jack
• One VGA port
• One line-out jack (S/PDIF) (3.5mm mini-jack)
• One audio line-in jack (3.5mm mini-jack)
• Four USB ports (USB 2.0)
• One IEEE 1394 (4-pin) port
• One SD/Memory Stick/MMC 3-in-1 slot
• One S-video output port
• One parallel port
• One FIR port
• Optional wireless LAN

Weight and dimensions

• 3.40 kg (7.5 lbs) for SiS chipset, 3.60 kg (7.9 lbs) for Intel chipset
• 326 x 290 x 36.8 mm (38.6 mm)

Environment
• Temperature
• Operating: 5°C ~ 35°C
• Non-operating: -10°C ~ 65°C
• Humidity (non-condensing)
• Operating: 20% ~ 80% RH
• Non-operating: 20% ~ 80% RH

Power
• 120 W 19 V AC Adapter

Options
• 128/256/512 MB PC 2700/3200 (333/400MHz DDR) soDIMM memory
K3V-K3U.book Page 95 Tuesday, February 17, 2004 9:48 AM

95

upgrade modules
• Additional AC adapter
• Additional Li-Ion battery pack
• Optional CD-ROM module
• Optional DVD module
• Optional DVD/CD-RW module
• Optional DVD+RW module
K3V-K3U.book Page 96 Tuesday, February 17, 2004 9:48 AM

96 A Specifications
K3V-K3U.book Page 97 Tuesday, February 17, 2004 9:48 AM

B Notices
K3V-K3U.book Page 98 Tuesday, February 17, 2004 9:48 AM

This appendix lists the general notices of

your computer.
K3V-K3U.book Page 99 Tuesday, February 17, 2004 9:48 AM

99

FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna
2. Increase the separation between the device and receiver
3. Connect the device into an outlet on a circuit different from that to which the
receiver is connected
4. Consult the dealer or an experienced radio/television technician for help

Notice: shield cables

All connections to other computing devices must be made using shielded cables to
maintain compliance with FCC regulations.

Notice: peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation with
non-certified peripherals is likely to result in interference to radio and TV
reception.

Caution
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority, which is granted by the Federal Communications
Commission, to operate this computer.

Use conditions
This part complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
K3V-K3U.book Page 100 Tuesday, February 17, 2004 9:48 AM

100 B Notices

Notice: Canadian users

This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numérique de la classe B respected toutes les exigences du Règlement
sur le matériel brouilleur du Canada.

Modem notices

FCC
This equipment complies with Part 68 of the FCC Rules. Located on the bottom
side of the modem is a label that contains, among other information, the FCC
Registration Number and Ringer Equivalence Number (REN) for this equipment.
Upon request, you must provide this information to your telephone company.
If your telephone equipment causes harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible, they will notify
you in advance. But, if advance notice is not practical, you will be notified as soon
as possible. You will also be informed of your right to file a complaint with the
FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an opportunity
to maintain uninterrupted telephone service.
If this equipment should fail to operate properly, disconnect the equipment from
the phone line to determine if it is causing the problem. If the problem is with the
equipment, discontinue use and contact your dealer or vendor.

TBR 21
This equipment has been approved to Council Division 98/482/EC - “TBR 21” for
pan-European single terminal connection to the Public Switched Telephone
Network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN termination point.
In the event of problems, you should contact your equipment supplier in the first
instance.

Important safety instructions

1. Read these instructions carefully. Save these instructions for future reference.
2. Follow all warnings and instructions marked on the product.
K3V-K3U.book Page 101 Tuesday, February 17, 2004 9:48 AM

101

3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator
or heat register, or in a built-in installation unless proper ventilation is
provided.
7. This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult your
dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord.
9. If an extension cord is used with this product, make sure that the total ampere
rating of the equipment plugged into the extension cord does not exceed the
extension cord ampere rating. Also, make sure that the total rating of all
products plugged into the wall outlet does not exceed the fuse rating.
10. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
11. Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks. Refer all
servicing to qualified service personnel.
12. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed
b. If liquid has been spilled into the product
c. If the product has been exposed to rain or water
d. If the product does not operate normally when the operating instructions
are followed. Adjust only those controls that are covered by the
operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to normal condition.
e. If the product has been dropped or the cabinet has been damaged
K3V-K3U.book Page 102 Tuesday, February 17, 2004 9:48 AM

102 B Notices

f. If the product exhibits a distinct change in performance, indicating a

need for service.
13. Replace the battery with the same type as the product's battery we
recommend. Use of another battery may present a risk of fire or explosion.
Refer battery replacement to a qualified serviceman.
14. Warning! Batteries may explode if not handled properly. Do not disassemble
or dispose of them in fire. Keep them away from children and dispose of used
batteries promptly.
15. Use only the proper type of power supply cord set (provided in your
accessories box) for this unit. It should be a detachable type: UL listed/CSA
certified, type SPT-2, rated 7A 125V minimum, VDE approved or its
equivalent. Maximum length is 15 feet (4.6 meters).

Laser compliance statement

The optical drive in this computer is a laser product. The optical drive’s classifica-
tion label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT

LASERATTENTION: RADIATION DU FAISCEAU LASER VISIBLE ET IN-
VISIBLE EN CAS D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX
RAYONS.

LUOKAN 1 LASERLAITE LASER KLASSE 1

VORSICHT: SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG,
WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHLL AUSSETZEN

PRODUCTO LÁSER DE LA CLASE I

ADVERTENCIA: RADIACIÓN LÁSER VISIBLE Y INVISIBLE AL SER ABI-
ERTO. EVITE EXPONERSE A LOS RAYOS.

LAG 1 LASER FABRIKAT

ADVARSEL: SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UN-
DGÅ UDS/ETTELSE FOR STRÅLEN.

VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.

VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUI-
JOTA SÅTEESEENSTIRRA EJ IN I STRÅLEN
K3V-K3U.book Page 103 Tuesday, February 17, 2004 9:48 AM

103

VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ

IN I STRÅLEN

ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I

STRÅLEN

Battery statement
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Discard used batteries ac-
cording to the manufacturer’s instructions.

ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske
med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til lev-
erandøren.

ADVARSEL
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en
tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold
til fabrikantens instruksjoner.

VARNING
Explosionsfara vid felaktigt batteribyte. Anvãnd samma batterityp eller en ekviva-
lent typ som rekommenderas av apparattillverkaren. Kassera anvãnt batteri enligt
fabrikantens instruktion.

VAROITUS
Päristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan
laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjei-
den mukaisesti.

VORSICHT!
Explosionsgefahr bei unsachgemäßen Austausch der Batterie Ersatz nur durch
denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung ge-
brauchter Batterien nach Angaben des Herstellers.
K3V-K3U.book Page 104 Tuesday, February 17, 2004 9:48 AM

104 B Notices

Year 2000 compliance statement

This notebook computer carries the "Hardware NSTL Tested Year 2000
Compliant" logo, which certifies that this model has been tested by NSTL using
the YMark2000 test, and has been found to meet NSTL's standards for Year 2000
hardware compliance.

Macrovision copyright protection notice

This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and
4,907,093 licensed for limited viewing uses only.

LCD pixel statement

The LCD unit is produced with high-precision manufacturing techniques.
Nevertheless, some pixels may occasionally misfire or appear as black or colored
dots. This has no effect on the recorded image and does not constitute a
malfunction.

A-Tick notice
For safety reasons, only connect headsets with a telecommunications compliance
label. This includes customer equipment previously labelled permitted or
certified.
The unit shall be connected to Telecommunication Network through a line cord
which meets the requirements of ACA Technical Standard TS008.
Australian approved mains cord set shall be used with the equipment.
K3V-K3U.book Page 105 Tuesday, February 17, 2004 9:48 AM

105

Index computer
bringing to meetings 68
caring for vii
cleaning viii
A connecting iii
AC adapter disconnecting 67
caring for vii features 10
connecting iv moving around 68
audio 33 on indicator 13
troubleshooting 83– 84 security 42
setting up a home office 70
B taking home 69
battery traveling internationally 72
installing iii, 48 traveling on local trips 71
battery pack turning on v
battery-low warning 50 connections
caring for vii AC adapter iv
characteristics 47 computer iii
charging 49 monitor 55
charging modes 49 printer 57
checking charge level 50 USB 60
installing 48 connectivity options 30
low conditions 51
optimizing 50
D
dc-in jack 8
removing 49
display 12
using the first time 47
hotkeys 18
BIOS Utility 76– 80
opening and closing 12
entering 76
power management 12
exit menu 80
simultaneous 12
navigating 76
troubleshooting 83
security menu 77
bottom view 9 E
brightness emergency eject slot for CD 84
hotkeys 19 error messages 86
volume 19 ethernet connection 30
C F
caps lock 15
FAQ. See frequently-asked questions
on indicator 14
frequently-asked questions 83
care
AC adapter vii H
battery pack vii Hibernation mode
computer vii hotkey 18
charging hotkeys 18
checking level 50
modes 49 I
cleaning indicator lights 13
computer viii inserting a disc 26
K3V-K3U.book Page 106 Tuesday, February 17, 2004 9:48 AM

106

K ejecting 59
keyboard 15 inserting 58
embedded numeric keypad 16 PC card 58
hotkeys 18 pc card slots 6
lock keys 15 ports
troubleshooting 84 IEEE1394 port 6
Windows keys 17 modem jack 8
network jack 8
L usb port 8
launch keys 5, 24 power
LEDs 13 turning on v
left view 6 Power management 52
line-in jack 9 printer
connecting 57
M troubleshooting 84
media access problems 83
on indicator 14 audio 83– 84
memory display 83
upgrading 63 keyboard 84
messages printer 84
error 86 startup 83
microphone
troubleshooting 84 Q
modem 30 questions
monitor setting location for modem use 85
connecting 55
R
N rear view 8
notice right view 7
DVD copyright protection 104
num lock 15 S
on indicator 14 security
numeric keypad keylock 42
embedded 16 passwords 42
service
O when to call viii
options simultaneous display 55
memory upgrade 63 speakers
PC cards 58 hotkey 18
spare AC adapter 62 troubleshooting 83
Standby mode
P status indicator 14
palm rest 20 status indicator 5
password 42 status indicators 13
changing in BIOS Utility 79 storage 26
removing in BIOS Utility 79 s-video 56
setting in BIOS Utility 78
types 42 T
PC Card touchpad 5, 21
K3V-K3U.book Page 107 Tuesday, February 17, 2004 9:48 AM

107

using 22– 23 connecting 60

travel utility
international flights 72 BIOS Setup 76– 80
local trips 71
W
U Windows keys 17
USB
K3V-K3U.book Page 108 Tuesday, February 17, 2004 9:48 AM

108