Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    304 Stainless Strip Data

    Uploaded by

    hu1569076
    304不锈钢

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    304 Stainless Strip Data

    Uploaded by

    hu1569076
    1 views1 page
    304不锈钢

    Original Title

    304-stainless-strip-data

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    304不锈钢

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views1 page

    304 Stainless Strip Data

    Uploaded by

    hu1569076
    304不锈钢

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Technical

    Data Sheet
    TYPE 304 STAINLESS STEEL STRIP
    Type 304, ASTMA-666, is similar to Type 302, but has a maximum carbon content of .08%. This
    material has an excellent combination of corrosion resistance and fabricability. Gibbs stocks Type
    304 stainless in gauges from .005” to .062”.

    Chemical Composition % Thickness Tolerances < 6” Tolerance (inch)


    (AMS 5513) (AMS 2242) +/-
    Carbon 0.08 max over .050 - .062 incl +/- .0030
    Manganese 2.00 max over .035 - .050 incl +/- .0025
    Silicon 1.00 max over .029 - .035 incl +/- .0020
    Phosphorus .040 max over .020 - .029 incl +/- .0020
    Sulfur .030 max over .017 - .020 incl +/- .0015
    Chromium 18.00 -20.0 over .013 - .017 incl +/- .0015
    Nickel 8.0 – 10.5 over .011 - .013 incl +/- .0015
    Molybdenum 0.75 max over .010 - .011 incl +/- .0015
    Copper 0.75 max under .010 +/- 10%

    Mechanical Properties (AMS 5513)


    Condition AMS Tensile Yield Elong Hardness
    Specification Min PSI Min PSI % Min
    Annealed 5513 75,000 30,000 40 RB 92 max
    ¼ Hard 5910 125,000 75,000 10 / 12* RC 25 min
    ½ Hard 5911 150,000 110,000 6 / 7** RC 32 min
    ¾ Hard 5912 175,000 135,000 3 / 5** RC 37 min
    Spring 5913 185,000 140,000 3 / 5** RC 41 min

    *Over .030 thickness


    ** Over .015 thickness

    Additional Information
    Width Tolerance +/- .003
    Camber Tolerance Up to and including 1.500” wide .500” in 8 feet
    Over 1.500” wide .250” in 8 feet

    Edges available #3 Slit edge


    #5 Deburred edge
    #1 Round edge
    The above charts are intended to provide general background information. You should also review the appropriate material
    specification. Please contact Gibbs if you have any questions.

    Gibbs Wire & Steel Company Inc.


    Metals Drive, Southington, CT 06489 (860) 621-0121
    No. 1032 01/14

    You might also like