How CD and DVD Players Work

Abstract
Everyone is familiar these days with Compact Disk (CD) and Digital
Versatile Disk (DVD) systems. In case familiarity has bred contempt for
these marvels of modern technology, we will try to explain in simple
terms the complex set of ideas and techniques that have made possible
the construction of these Optical Data Storage devices. Information, be it
analog (such as voice, still images, video) or digital (e.g., text, computer
files, internet traffic) can be represented in binary format as a string of 0's
and 1's. These binary strings can be stored on optical disks and retrieved
(for reproduction) using lasers and other sophisticated opto-electronic
instruments. In this presentation we describe methods of conversion of
the various forms of information into binary sequences, discuss methods
of storing these sequences on CD and DVD platters, and explain how this
information is recovered/reconstructed during playback.
 A Little History
The history of the compact disk (CD) started in the 1970’s with the videodisk
in the form of Video Long Play (VLP) read-only systems. The videodisk did
not become a commercial success, even after write-once optical disks of
different formats and sizes were introduced. These were analog systems. In
1982 the CD-DA (compact disk-digital audio) was introduced to the market
jointly by Phillips and Sony. It stored a high-quality stereo audio signal in a
digital format. These systems became a huge success. In 1985, the technology
was extended to computer storage, again in a collaboration between Phillips
and Sony. This was called a CD-ROM (compact disk-read only memory).
Early in 1995, two major groups were competing to develop the next
generation of high-density compact disks. Under the partnership of Philips
and Sony, there began the development of one such format. Concurrently, a
group led by Toshiba and Time Warner was working on another format. In
September of 1995 the two camps agreed to develop a single standard for a
high-density compact disk. The first DVD-video players were sold in Tokyo
in November’96, followed by their US introduction in August’97.
 CD Under a Microscope

Spiral track
Track direction

Low-magnification (32) image of a

CD showing an edge of the data zone.
 How Small are the Pits on a CD?

Dust (40mm) Human hair (75mm) Cotton thread (150mm)

CD pit (0.5  2mm)

Fingerprint (15mm)
 Track Density and Data Density
The CD is 12 cm in diameter, 1.2 mm thick, has a center
hole 1.5 cm in diameter, and spins at a constant linear
velocity (CLV) or constant angular velocity (CAV).
There is only one track on the optical disk and all data are
stored in a spiral of about 2 billion small pits on the
surface. There are about 30,000 windings on a CD - all
part of the same track. This translates into about 16,000
tracks per inch and an areal density of 1 Mb/mm2.
The total length of the track on a CD is almost 3 miles.
CD Versus DVD
 CD in Cross-section

A CD can store up to 74 minutes of music, so the total

amount of digital data that must be stored on a CD is:
2 channels  44,100 samples/channel/second  2 bytes/sample 
74 minutes  60 seconds/minute = 783,216,000 bytes
To fit more than 783 megabytes onto a disk only 12 cm in
diameter requires that the individual bits be very small.
Different Types of DVD
Inside a CD Player
Optics of
Readout
 Focused Laser Beam Reading the Pits on a CD Surface

Pits are 120 nm deep and 600 nm

wide. Laser beam scatters when it
scans a pit, which translates into a
drop in reflected beam intensity.

The laser beam (wavelength ~ 780 nm) is focused onto

the data side of the disk (focused spot diameter ~ 1mm).
The laser moves in the radial direction over the fast
spinning disk and scans the data track.
Why Focus the Laser Light through the Substrate?
 Three-beam Tracking

On the top and bottom frames, the central spot B has drifted to one side
of the track and the modulation is greatest in one of the side beams A or
C. In the center frame, the central spot B is correctly located over the
track and the modulation from the central spot is a maximum.
 Focus Actuator

Inside the drive, the disk and the drive's optics are separated by a
distance of about 1 mm, making mechanical interaction and crashes,
even with wavy disks and imperfect clamping almost impossible.
Automatic Focusing
Automatic Focusing
Automatic Focusing
How Many 8-letter Words Are There?
AAAAAAAA 00000000
28 =256
AAAAAAAB 00000001
AAAAAAAC 00000010
. .
BROADWAY 00100010
. .
CONSTANT 01001011
. .
. .
WILDCATS 11100010
. .
ZZZZZZZZ 268 =208,827,064,576 11111111
 The ASCII Code
A  00101101
B  00101110
.
Z  11011001
0  11011100
1  01010101 Any English text can therefore be
2  10101111 translated into the language of 0’s
. and 1’s (the Binary Language)
9  11001100 with the aid of the ASCII code.
?  10101001
 00101001
(  11100010
.
.
Audio Signal
Electrical Waveform
Sampling and Analog to Digital Conversion (ADC)

As the sampling rate and precision of analog to

digital conversion increase, the fidelity (i.e., the
similarity between the original wave and the
“digitized” wave) improves. In the case of CD
sound, the sampling rate is 44,100 samples per
second and the number of gradations is 65,536
(corresponding to 16 bits per sample). At this
level, the playback signal so closely matches the
original waveform that the sound is essentially
perfect to the human ear.
 Translating Binary Digits to Pits
This image cannot currently be display ed.
 Mastering and Pressing Disks
Mastering involves physical transfer of the data into the pits and lands.
First, a layer of light-sensitive photoresist is spin-coated onto the clean glass
master-disk from a solvent solution. Then, the photoresist is exposed to a
modulated beam of a short-wavelength light, which carries the encoded
data. Next, the master is developed in a wet process by exposing it to the
developer, which etches away exposed areas thus leaving the same pattern
we will find later on the CD. Next, the master is coated (using
electroplating technique) with a thick (about 300 mm) metal layer to form a
stamper - a negative replica of the disk. The photoresist layer is destroyed
during this process, but the much more durable stamper is formed and can
be used for CD replication. Usually, a stamper can be used to produce a few
tens of thousands CDs before it wears out. Finally, the process of injection
molding is used to produce a surface of the compact disk. Hot plastic (PC)
is injected into a mold, and then is pressed against the stamper and cooled,
resulting in the CD. At the very end, the pits and lands on the surface of a
CD are coated with a thin reflective metal layer (aluminum), then coated
with lacquer and supplied with the label.
 Speed Rating of CD-ROM Drives
The speed ratings of CD-ROM drives are based on comparison with the first
generation drives with the data transfer rates of 150 KB/s or 1X. Today's drives
operate at more then 32X boosting data transfer rates beyond 4.8 MB/s, and the
improvement has mostly come from the increase in spin rates. The other
components have mostly remained unchanged. It seems at this point, that further
increase in spindle speed may be impractical due to loss in drive performance.
Previously, CD-ROM drives (slower than 12X) were designed on the basis of the
constant linear velocity (CLV) principle, where the angular speed of the drive
(rpm) was continuously adjusted following the read head to keep the laser spot
moving over the disk surface at constant velocity. This provided uniform spacing
of the pits along the track and a constant data transfer rate independent of head
positioning over the disk. At some point, this principle was sacrificed to keep up
with the need for faster motors, which is much easier to achieve with the constant-
angular speed motors. The newest CD drives operate at constant angular velocity
(CAV). Now, the transfer rate is a function of the data radius. This also means that
the average data transfer rate of the drive is much lower than the drive's maximum
rate specified by its X-rating.
 CD vs. DVD

● 74 min. capacity= ● 4.7 GB ● 4.7 GB

(Beethoven’s 9th)! ● 18-20x
● 1x by definition ● 1-4x Original ● 11 Mbit/s
● 1x = 1.23 Mbit/s ● 4-10x High speed ● 650 nm laser
● linear V = 1.2 m/s ● 12-24x Ultra speed
● >12x = CAV ● 32x Ultra Speed+
● 780 nm laser

● 25 GB (1-layer)
● 50 GB (2-layers)
● 700MB ● 1x = 36 Mbits/s
● 1x-72x speeds ● 1x–14x speeds
● 405 nm laser