Capacities (Refill) D9T

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine(SEBP...

Page 1 of 2

Shutdown SIS

Previous Screen

Product: TRACK-TYPE TRACTOR


Model: D9T TRACK-TYPE TRACTOR RJS
Configuration: D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED
BY C18 Engine

Operation and Maintenance Manual


D9T Track-Type Tractor
Media Number -SEBU7765-04 Publication Date -01/09/2009 Date Updated -24/09/2009

i03702218

Capacities (Refill)
SMCS - 7560

Table 1

APPROXIMATE REFILL CAPACITIES


Compartment or System Liters US Gallons Imperial Gallons
Cooling System 101 26.7 22.2
Fuel Tank 889 235 195.6
Engine Crankcase and filter 38 10 8.3
Power Train Oil 164 43.3 36.1

Hydraulic Tank Oil (Only) 89 23.5 19.6


Each Final Drive 15 3.9 3.3
Roller Frames (Each Compartment) 45 11.9 9.9
Pivot Shaft 30 7.9 6.6
Equalizer Bar End Pin (Each Joint) .11 .03 .02

Note: You should increase the quantity of oil in the power train whenever you operate the machine on
severe slopes. The quantity of oil in the power train can be increased up to 10 percent. When you
operate with this increased oil quantity, prolonged operation in some machine positions can cause high
power train oil temperatures. Remove this excessive oil quantity after your work on severe slopes has
been completed.

Note: For severe slope operation, engine oil should be maintained on the full mark. The engine should
never be overfilled with oil.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 1/12/2010
D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine(SEBP... Page 2 of 2

Ecology Drains
Table 2

Ecology Drain (Components)


Location (Drain) Needed Component
12.7 mm (0.5 inch)
Coolant
pipe with 1/2-14 NPTH thread

Transmission 12.7 mm (0.5 inch)


pipe with 1/2-14 NPTH thread

Torque Converter 12.7 mm (0.5 inch)


pipe with 1/2-14 NPTH thread

Engine Oil
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread
126-7914 Oil Drain Coupling
or
Hydraulic Tank
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread
4C-8563 Oil Drain Coupling
or
Bevel Gear Case
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread

Copyright 1993 - 2010 Caterpillar Inc. Tue Jan 12 15:45:07 EST 2010
All Rights Reserved.
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 1/12/2010

You might also like