Scribd Logo
Upload

Welcome to Scribd!

  • 327 views

    En 13964 Information 04

    Uploaded by

    AbdelKarim Baarini
    The European Standard BS EN 13964 establishes requirements for suspended ceilings used in interior applications. It covers test methods and assessments for characteristics like reaction to fire, release of asbestos and formaldehyde, sound insulation, and flexural tensile strength. Manufacturers must now test products according to this standard and provide proof of performance. It introduces new terminology for expressing characteristics like reaction to fire. The standard became applicable on January 1st, 2005, with a coexistence period allowing use of existing local standards until July 1st, 2007, after which products must be CE marked according to the European Standard.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    En 13964 Information 04

    Uploaded by

    AbdelKarim Baarini
    327 views1 page
    The European Standard BS EN 13964 establishes requirements for suspended ceilings used in interior applications. It covers test methods and assessments for characteristics like reaction to fire, release of asbestos and formaldehyde, sound insulation, and flexural tensile strength. Manufacturers must now test products according to this standard and provide proof of performance. It introduces new terminology for expressing characteristics like reaction to fire. The standard became applicable on January 1st, 2005, with a coexistence period allowing use of existing local standards until July 1st, 2007, after which products must be CE marked according to the European Standard.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The European Standard BS EN 13964 establishes requirements for suspended ceilings used in interior applications. It covers test methods and assessments for characteristics like reaction to fire, release of asbestos and formaldehyde, sound insulation, and flexural tensile strength. Manufacturers must now test products according to this standard and provide proof of performance. It introduces new terminology for expressing characteristics like reaction to fire. The standard became applicable on January 1st, 2005, with a coexistence period allowing use of existing local standards until July 1st, 2007, after which products must be CE marked according to the European Standard.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    327 views1 page

    En 13964 Information 04

    Uploaded by

    AbdelKarim Baarini
    The European Standard BS EN 13964 establishes requirements for suspended ceilings used in interior applications. It covers test methods and assessments for characteristics like reaction to fire, release of asbestos and formaldehyde, sound insulation, and flexural tensile strength. Manufacturers must now test products according to this standard and provide proof of performance. It introduces new terminology for expressing characteristics like reaction to fire. The standard became applicable on January 1st, 2005, with a coexistence period allowing use of existing local standards until July 1st, 2007, after which products must be CE marked according to the European Standard.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    BS

    EN 13964:2004
    is the harmonised European standard applicable from 1st January 2005, which provides information for the parties responsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications. It covers suspended ceilings sold as kits, individual components & membrane components and describes test methods & methods of assessment as well as provisions for the evaluation of conformity of the products to the requirements of this standard. It should be noted that the standard does not cover the following types of suspended ceiling: ceilings in mobile buildings caravans and other forms of transportation, ceilings with heating or cooling properties, ceilings subject to water penetration requirements, ceilings used externally where requirements other than covered by this scope would apply (tunnels, canopies, petrol stations, arcades, open sports facilities, car parks, etc.), heavy duty suspended ceilings or their supporting construction, ceilings formed in-situ with no prefabricated membrane (e.g. plastered ceilings). The standard will in the main cover the following essential characteristics for most interior suspended ceilings. Those highlighted are directly relevant to the products in this publication: reaction to fire fire resistance (kits only) release of asbestos release of formaldehyde shatter properties (brittle materials only) flexural tensile strength load bearing capacity (grids) electrical safety sound insulation (kits only) sound absorption thermal conductivity condensation Many of these performance characteristics have in the past been assumed or even deemed unnecessary, however under the banner of EN13964, manufacturers have to prove or justify the performance of the products. As a result we will have to become familiar with some new terminology in making reference to product performances. We will cover some of the main ones in the following section. Performances and Terminology We have become very familiar with the existing terminology used to clarify test performance of ceiling products. Typical examples such as Class 1/0 to describe fire reaction performance, 90%RH @ 40C for humidity resistance and aW 0.7 for sound absorption are in common use within our industry. The advent of EN 13964 means that some of these familiar expressions will disappear and a number of new ones will be introduced.

    European Standard for suspended Ceilings


    Some of these such as sound absorption and thermal conductivity remain the same. We will highlight the new requirements below with explanations as to what they mean. Reaction to Fire Possibly the most complex change. The existing test procedure in the U.K. to determine fire reaction performances of ceiling linings is to test in accordance with British Standard BS 476: pt 7 and BS 476: pt 6. Under the requirements of BS EN 13964 we must now test in accordance with the requirements of EN 13501-1: 2002. Without overcomplicating this here with excessive detail, EN 13501-1 dictates which specific test options are available to achieve performance levels. For fire reaction of ceiling linings this is now to be expressed involving 3 distinct factors; Combustibility (Flame spread and propagation) expressed from A2 (best) to F; Smoke production expressed from s1 (best) to s3; and Burning Droplets expressed from d0 (best) to d2. Where currently we are used to referring to Class 0, Class 1 etc, we must become familiar with the expressions A2-s1, d0 or B-s2, d3 for example. In simple terms, A2 means the membrane component is of limited combustibility; s1 means that smoke production is light and d0 means that no burning droplets were released from the specimen. There is also a category A1, which basically means non combustible, similar to the current BS 476: pt 4, which does not require reference to smoke production or burning droplets. The latest edition of Building Regulations Approved Document B (2000 edition consolidated with 2000 and 2002 Amendments) now includes these new performance requirements and illustrates a general comparison of performance requirements between current and new standards. Please refer to Building Regulations Approved Document B: Section 7: Table 10. Release of Formaldehyde Where Formaldehyde containing material is part of the formulation of a ceiling component this component must be tested to determine the level of formaldehyde likely to be released. This is to be tested and classified in accordance with ENV 717-1 & 717-2, and classified E1 or E2. An E1 classification means that formaldehyde release is either nil or negligible. Release of Asbestos No part of a ceiling shall contain asbestos. Sound Absorption No change. The absorption performance of USG Acoustical Ceiling products will be stated as before on the product page. Thermal Conductivity No change. The Thermal Resistance (R-value) of USG Acoustical Ceiling products will be stated as before on the product page. Flexural Tensile Strength This new requirement effectively illustrates the ability of a membrane component to support its own mass when installed in the substructure (grid), under specific environmental conditions. It is intended to determine the aesthetic appearance of the membrane component in installation. This must be determined by testing in accordance with the procedures specified in EN 13964. The result of the test shall be declared as a classification of deflection (expressed from Class 1 [best] to Class 3) in combination with a classification of exposure (expressed as A [lowest] to D) and the applied load. The results are expressed as, for example, Class 1/B/No load, where Class 1 means the deflection of the membrane component is no more than 1.2mm (based upon a 600mm edge); B indicates an environment of up to 90% RH @ 30C; and No Load means no additional load was applied to the component in test. Certificates of Conformity USG engaged the services of Warrington Certification Ltd (EC Reference Number: 1121) to test, collate and present the test documentation, and produce a Certificate of Conformity to provide independent proof of the component compliance with the standard. Copies of these certificates are available from USG upon request. CE Marking of Suspended Ceilings Compliance with all the relevant requirements of BS EN 13964 allows a manufacturer to apply a CE mark symbol to his products. This will show that the product is approved and certified with the requirements of the applicable European Directive and is therefore legally able to be sold and marketed in those countries participating in the European Economic Area (EEA) agreement. The Construction Products Directive (CPD) relevant to Suspended Ceilings is Council Directive 89/106/CE. This identifies the requirements for suspended ceiling products upon which the new standard BS EN 13964 has been based. Period of Coexistence BS EN 13964 was introduced and applicable from 1st January 2005. Originally a 12 month period of coexistence with existing local standards meant that BS EN 13964 was to become mandatory on 1st January 2006. It should be noted that EN 13964 is currently being discussed at European level with a view to making amendments to the standard. This will result in a revised standard and a guidance document being published at some point in the future. With this in mind, the European Commission Standing Committee on Construction have agreed to extend the coexistence period of EN 13964 by 18 months. The date for the end of the coexistence period is now therefore 1st July 2007, at which point any Suspended Ceiling product placed into the European Economic area must be CE marked in accordance with EN 13964 Suspended Ceilings.

    37

    You might also like