Related Literatures. According to Bopray, A.

(2024, October 8) Among these

innovations, solar lights are one of the more popular solar products in use today. Also

known as a solar lamps or solar lanterns, these convenient lights are attached to their

own solar panels and battery, allowing the light to shine even without being connected

to a power outlet.

The solar power light is a vital piece in the process of inspecting vehicles

because if there is not enough light there may be a wrong inspection of a vehicle or

worst case it may also cause accidents to the work place.

According to Cheng, H. (2023, May 3). A solar lighting system is an efficient and

environment-friendly method of generating electrical energy using sunlight as the

primary energy source. These systems harvest solar energy through solar panels and

then convert it into electrical energy using specialized equipment, which powers

integrated LED lamps or bulbs that provide illumination.

The use of the solar lighting system is efficient and the energy it gets from the

sun lights will help in lighting the led lumps and bulbs that provide light in our

workshops.

Based on (2024, October 1). solar electric power company. Solar lights offer

many advantages over traditional lights, including energy efficiency, low maintenance,

easy installation, cost-effectiveness, versatility, environmental friendliness, and safety.

The solar light has advantages compared to the usual light that is used in our

workshops, it provides low electricity consumption and it has low maintenance and is

environmentally friendly.
 Zhong, Z. (2023, May 12). Unlike traditional lighting systems, the power output

of solar lights is dependent on the amount of energy they can produce and store. In the

past, this limiting factor restricted the range of applications for solar lighting systems.

However, with technological advancements in LED efficacy and battery management,

this gap is progressively being narrowed, thus making solar lights more capable of

offering better light performance.

Solar lights are not like the lighting system we are used to because solar lights

depend on the amount of sun light energy collected so, he can be there quickly draining

the battery so low battery will cost him the dimming of the light.

How lithium-ion batteries work. (n.d.). A battery is made up of an anode, cathode,

separator, electrolyte, and two current collectors (positive and negative). The anode and

cathode store the lithium. The electrolyte carries positively charged lithium ions from the

anode to the cathode and vice versa through the separator. The movement of the

lithium ions creates free electrons in the anode which creates a charge at the positive

current collector.

The lithium-ion battery provides power to people's devices such as laptops,

cellphones and even hybrid vehicles. The lithium-ion battery consists of anode, cathode,

separator, electrolyte, and it has current collectors that are positive and negative.

Marsh, J. (2023, December 6). Monocrystalline panels are usually the most

expensive solar panel type. Manufacturers must absorb the costs of making solar cells

from a single crystal. This process, known as the Czochralski process, is energy-

intensive and results in wasted silicon.

 Monocrystalline panels are the most expensive panel and it is also the most

efficient of the three panels.

Marsh, J. (2023, December 6). Polycrystalline solar panels are typically cheaper

than monocrystalline panels. The cells come from silicon fragments rather than a single,

pure silicon crystal. This allows for a much simpler cell manufacturing process, costing

less for manufacturers and homeowners who install the panels.

The Polycrystalline solar panels are the most typical and the price is lower than

the Monocrystalline and among the three panels it has the most cost effective.

Marsh, J. (2023, December 6). Hin-film solar panel installation is usually lower

than a monocrystalline or polycrystalline solar installation. Thin-film solar panel

installations are less labor-intensive because the panels are lighter and more

maneuverable. It is easier for installers to carry them onto rooftops and secure them.

Installers generally charge less for labor with thin-film panels, making the installation

less expensive overall.

The hin-film solar panel is lower in price than the two previous panels and the

hin-films solar panel is more suitable for those who like to do DIY projects.

Based on Guide to building an automotive Toolbox and tool set Like a Pro. (n.d.).

jegs. Having a place to organize and store your tools secure is a must in any garage

setting. Choosing a tool box or a cart that suit your work place dimension and other

needs can help ensure your tools remain protected, well-organized, and accessible.

Having a proper tool box will help to prevent the tools from getting damaged and

not being misplaced by the mechanic when you are done working on the car.
 According to (LED Lights for Auto Repair Shops | PrimeLights, n.d.) Mechanics

know how hard it can be to work with insufficient lighting. Not only is it tough to see your

tools and instruments, but near impossible to do precision work that’s spot-on accurate.

That’s why we provide our very own selection of auto repair shop lighting solutions, so

that you can worry less about how bright it is and focus on the finer details.

The technician or mechanic has difficulty moving at work due to the lack of light.

because of this, there may be an inaccurate diagnosis of the leaks in the customer's

vehicle. therefore, sufficient light is required to ensure that the work on the vehicle is

quality.

Based on (Universal Technical Institute, 2021) U.S. Department of Labor and the

Occupational Safety and Health Administration (OSHA) have established workplace

standards for automotive technicians. These auto repair shop policies and procedures

help ensure that those working in these jobs have access to the proper equipment, as

well as information about workers’ rights.

Safety and health in the workplace are important and it must achieve the

standard for technicians or mechanics. To follow the access to the correct use of tools

and equipment in a company and workers’ rights.

According to Imran, M. (2023, October 25). Lighting in the workplace is far more

than just being able to see clearly. It goes beyond illumination, permeating various

aspects of the work experience. It is an integral part of workplace ergonomics – the

science of optimizing the work environment for the comfort and productivity of the
employee. It can greatly affect concentration, mood, fatigue levels, and even safety in

the workspace.

The light in the workplace is not only to see what is being done clearly, it is also

an important part of the workplace because it can affect the work, its effect on the

worker is when there is comfort in what is being done and can also be productive

because who would want to work when the work place is dark.

Based on (The Importance of Good Lighting in Enhancing Workplace Wellness,

n.d.) Good lighting is foundational to a productive and healthy work environment.

Beyond enabling basic visual tasks, it influences several aspects of human health and

behavior, including mood regulation, mental alertness, and physiological rhythms.

Having good lighting that can be used in any workshop or any company that will

result in being healthy in the workplace as well as in the environment. because if the

lights are not enough, it may affect or have a wrong inspection of the vehicles.

According to Burry, J. (2022, July 28). A trouble light is a heavy-duty semi-

portable corded light that you can use in situations that may subject the light source to

abuse or damage. Therefore, it’s built to withstand challenging conditions where

illumination is not accessible. The bulbs are commonly protected by a metal or plastic

shroud or cage and the power cable comes out the bottom of the handle.

As Mentioned by Gurung and Qiao (2018). Today's world is energy driven and

batteries have become an integral part as an energy source considering the

technological advances in consumer electronics to electric vehicles, renewables, and

smart grids. Batteries are energy limited and require recharging. Recharging batteries
with solar energy by means of solar cells can offer a convenient option for smart

consumer electronics.

Local literature

As Mentioned, (Ilawatbp, 2024). Proper lighting is not just a matter of aesthetics;

it’s a crucial element that impacts employee well-being and productivity. By investing in

the right lighting solutions from ilaw atbp., businesses in the Philippines can create work

environments that are both efficient and pleasant. Whether it’s through natural light

optimization, high-quality LED lights, or custom lighting designs, ilaw atbp. has the

expertise and products to illuminate your path to productivity.

 The proper lighting is not an addition to the aesthetics of the work shop, but it is

crucial because it affects the work of the mechanic or anyone who is with him in the

company. By investing in good lights, you can be sure to achieve the correct inspection

of our vehicles.

Related studies

As Mentioned by (Kannan et al., 2022). Attractive offers to retailers as well as to

the consumers take important part in the sale of LED lights. Added features, durability

and reliability have considered as the major determinants of quality of LED lights. From

the perception of retailers and wholesalers, their store image has taken an important

part in the sale of LED lights.

According to (Nandyal et al., 2023) Energy that is replenished over time is called

"renewable energy," and it may come from a variety of sources. It offers eco-friendly

power that is derived from renewable resources. Increasing renewable energy use will

reduce the need for, and the cost of, fossil fuels. This new solar charging station's

output will create renewable energy to charge EV batteries, lowering pollution levels and

improving environmental sustainability.

 As Mentioned, (Sawicki & Wolska, 2022). Lighting is an integral aspect of

electrical engineering and public safety, as buildings, public areas—both indoors and

outdoors—or any type of workplace must be illuminated in a way to prevent accidents.

Based on what Sawicki & Wolska said, lighting is an important tool to be safe not

only inside the workplace but also outside as well as on the road to avoid accidents

caused by dark lights.

According to (Liang et al., 2019). Rechargeable batteries are the primary energy

source of PEDs and hold the key to guarantee their desired performance stability. With

the remarkable progress in battery technologies, multifunctional PEDs have constantly

been emerging to meet the requests of our daily life conveniently.