Customer :

Project Name :
Project No. :
Revision No. :

SPECIFICATION
for
INDUCTION MOTOR

0 For Bidding

No. DATE DESCRIPTION PREPARED BY CHECKED BY APPROVED BY

www.hd-hyundaielectric.com
 AC INDUCTION MOTOR DATA SHEET
Catalog No. HHI125-18-444TC Item No. Rev. No. [ ]
Project Name Project No. Quantity sets
GENERAL SPECIFICATION PERFORMANCE DATA
Frame Size 444TC Rated Output 95 kW 0 125 HP
Type PJP Number of Poles 4
Enclosure(Protection) Totally Enclosed / IP55 Rotor Type Squirrel Cage
Method of Cooling IC411(FC) Starting Method* D.O.L
Rated Frequency 60 Hz Rated Voltage 575 V 460 V 230 V
Number of Phases 3 Current Full Load 113.6 A 142.0 A 284.1 A
Insulation Class F Locked-rotor** 700 % 700 % 700 %
Temp. Rise at full load (by resistance method) Efficiency
at 1.0 S.F 80 deg. C 50% Load 92.4 % 0
Motor Location Indoor Outdoor 75% Load 94.4 % 0
Altitude Less than 1,000 meter 100% Load 95.4 %
Relative Humidity Less than 80 % Power Factor(p.u)
Ambient Temp. 40 deg. C (Max.) 50% Load 0.730 0
Duty Type Continuous ( S1 ) 75% Load 0.830 0
Service Factor 1.15 100% Load 0.880 0
Mounting B35 Speed at Full Load 1785 r.p.m 0
Type Anti-Friction Torque
Bearing DE/N-DE 6318C3 / 6316C3 Full Load 374.9 lb.ft 0
Lubricant Grease(Polyrex-EM) Locked-rotor** 140 % 0
External Thrust Not applicable Breakdown** 220 % 0
Coupling Method Direct V-belt Moment of Inertia (J)
Shaft Extension Single Load(Max.) 1,507.479 lb.ft2
Terminal Main Cast Iron Motor 52.510 lb.ft2
Box Aux. No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing 85 dB(A)
Application Vibration 3.8 mm/sec (peak)
Area classification Hazardous Permissible number of Cold 3 times
Type of Ex-Protection Class I&II, Division 2 consecutive starts Hot 2 times
Applicable Standard NEMA MG1, CSA C390 Paint Munsell No. 4.0PB5.4/5.5(VL-451)
ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)
B35 LM-T1444C4PL001 1610 lb.

REMARK
1. Premium efficiency according to NEMA MG1
2. Inverter Duty @ 1.0 Service Factor & F Temperature rise
-. 10:1 VT (20:1 VT at 50% load)
-. 10:1 CT
-. CHP up to 1.5 times base speed, NEMA MG1 Part31
3. CSA Certification
SPARE PARTS -. Class I, Division 2, Group A, B, C & D
-. Class II, Division 2 Group E, F & G (Group E : up to 320Fr.)
4. Service Factor 1.15 and Temperature rise B are applicable
under the condition of sine wave power.
5. Service Factor 1.25 is applicable to motors of 100HP or less
with temperature rise F & Non-Hazardous.

Date DSND CHKD CHKD APPD

2024-07-13 S.H. Lee I.K. Kim R.G. Kim S.W. Kim
[Note] Others not mentioned in this data sheet shall be in accordance with maker standard.
Above technical data are only design values and shall be guaranteed with tolerance of applicable standard.
Inspection and performance test shall be done according to maker standard, if not mentioned.
* In case of Inverter-Fed Motor, performance data is based on sine wave tests. It may be different from test data of Inverter combined motor.
** Data is based on rated voltage & frequency and is expressed as a percentage of full-load value.
 4.72

125HP 4P 230/460V HHI125-18-444TC

HLS444PR04 F 284.1/142
HLS CONT H 40°C 60Hz
444TC TEFC 1.15 1785 95.4%

2.36
6318C3 94.4%
6316C3 B
50Hz 125HP 380V 168.6A 1480rpm S.F.: 1.0 Eff.: 94.7% Code: E
50Hz 125HP 400/415V 160.9/156.6A 1482/1484rpm S.F.: 1.0 Eff.: 95/95.2% Code: F/G
LATER PJP

- - 1610 lb

CSA Class I, Division2 Severe Duty (HHI, 364-449)

4M-135702
NP-HHI125-18-444TC 0
 CURVE NO.
PERFORMANCE CURVE
PC-HHI125-18-444TC
Type : PJP 95kW 125HP 4P 60 Hz
Full Load Torque : 374.9 lb.ft Speed at Full Load : 1785 RPM
Load moment of Inertia (J) : 1507.479 lb.ft2 Rated Voltage 575V 460V 230V
Motor moment of Inertia (J) : 52.510 lb.ft2 Full Load Current 113.6A 142.0A 284.1A

SPEED VS TORQUE & CURRENT CURVE

250 800

Current at rated voltage

700

200
600

500

CURRENT IN %
TORQUE IN %

150
Torque at rated voltage
400

100
300

200
50

100

0 0
0 10 20 30 40 50 60 70 80 90 100
SPEED IN %

OUTPUT VS EFF., P.F & CURRENT CURVE

100.0 200

180
EFF.
90.0
160

140
80.0
EFF. & P.F IN %

CURRENT IN %

120
P.F
70.0 100

80
Current
60.0
60

40
50.0
20

40.0 0
0 25 50 75 100 125
LOAD IN %

RM-P251-133 A4(210mm x 297mm)

Cls. I&II, Div. 2
IEEE 841