Effective Shell Searchctrl K

Skip to
main
On this page content

Understanding Shell Expansion

When you are working with the shell there are a number of techniques that you can use to take simple
commands and make more useful. For example, if we wanted to create three files, we could run touch file1
file2 file3 , or we could use 'brace expansion' and just run touch file{1..3} . Another example would be
to delete all files that have names that start with file - like this rm file* , this is wildcard expansion.

Collectively, these features are called 'Shell Expansion'. I think that introducing the entire set of features that
make up shell expansion in one go can be a bit overwhelming, but now that we are in the advanced chapters
it makes sense to understand exactly what shell expansion is, when it occurs, when it doesn't and how
understanding it can make you a more effective user.

There are seven types of expansion that occur in the shell - in this chapter we'll look at each in detail and then
see how they work together.

What is Shell Expansion?

When the shell receives a command, either from the user typing at the keyboard, or from a shell script, it
breaks it up into words. After this happens, the shell performs seven operations on the words, which can
change how they are interpreted. These seven operations are collectively known as 'shell expansion'. You are
probably familiar with most of them as we have used them throughout this book.

The seven operations that the shell performs are:

1. Brace Expansion - expanding values between braces, such as file{1..3} into file1 file2 file3
2. Tilde Expansion - expanding the ~ tilde symbol for the home directory into the path to the home
directory, such as ~/effective-shell into /home/dwmkerr/effective-shell
3. Parameter Expansion - expanding terms that start with a $ symbol into parameter values, such as $HOME
into the value of the variable named HOME
4. Command Substitution - evaluation of the contents of $(command) sequences, which are used to run
commands and return the results to the shell command line
5. Arithmetic Expansion - evaluation of the contents of $((expression)) sequences, which are used to
perform basic mathematical operations
6. Word Splitting - once all of the previous operations are run, the shell splits the command up into 'words',
which are the units of text that you can run loops over
7. Pathname Expansion - the shell expands wildcards and special characters in pathnames, such as
file*.txt into the set of files that are matched by the sequence

If you want to see each of these operations in the manual, you can run man bash and search for the text
^EXPANSION . Now let's see how each operation works in more detail.
Shell Expansion
Let's take a look through each of the forms of shell expansion that are available to use.

Brace Expansion
Brace expansion is the first shell expansion operation that occurs, it expands a simple expression that
represents a sequence or range of characters.

In the examples below I'll show the expression on the first line and then what it expands to on the second
line. The first example expands a set words or characters:

mkdir /tmp/{one,two,three}

# The line above is expanded to:

mdkir /tmp/one /tmp/two /tmp/three

Expansions of sets like this are a great way to perform operations that work on multiple files or folders at
once.

We can also create sequences of numbers or characters:

touch file{1..5}.txt

# The line above is expanded to:

touch file1.txt file2.txt file3.txt file4.txt file5.txt

You as well as specifying the start and end of a sequence, you can specify the increment, you might see this in
for loops like this:

for x in {0..10..2}; do print $x; done

# The line above is expanded to:

for x in 0 2 4 6 8 10; do print $x; done

Tilde Expansion
If a word starts with a ~ tilde character, then the shell will expand the tilde into the value of the $HOME
variable:

cd ~/effective-shell

# The line above is expanded to:

cd $HOME/effective-shell

If we were to unset the $HOME variable, then the expansion would use the current user's home directory:
 unset HOME
cd ~/effective-shell

# The line above is expanded to:

cd /home/dwmkerr/effective-shell

Tilde expansion is very simple!

Parameter Expansion
When the dollar symbol $ is used, this indicates that the shell is going to perform parameter expansion,
which expands variables or the parameters of a script. It can also be used to indicate command substitution or
arithmetic expansion - which we will see once we've looked at parameter expansion.

A lot of these expansions are covered in detail in Chapter 19 - Variables, Reading Input, and Mathematics but
I have included each of the available expansions here for reference.

In its most simple form, parameter expansion simple replaces the name of a variable or parameter with its
value:

fruit=apples
echo "I like $fruit"

# The line above is expanded to:

echo "I like apples"

When using parameter expansion it is generally preferable to surround the name of the parameter with
braces - this allows you to tell the shell unambiguously what the name of the parameter is. For example:

echo "My backup folder is: ${HOME}backup"

# The line above is expanded to:

echo "My backup folder is: /home/dwmkerrbackup"

If we had not used braces, then the shell would expand the expression like so:

echo "My backup folder is: $HOMEbackup"

# The line above is expanded to:

echo "My backup folder is: "

The reason that the expansion doesn't work as expected in this case is that the shell is trying to expand a
parameter with the name HOMEbackup - the braces used in the first example make it clear to the shell that the
parameter name is HOME and that the text backup should be added at the end of the expanded value.

There are a number of additional features available for parameter expansion that can make it more
convenient. Let's look at each of them now.

Default Values
The expression ${parameter:-default} will expand to the value of the parameter named parameter - but if
that value is not set, then the value default is used. This can be convenient if you want to provide a value for
the shell to use when a parameter is not set.

Assign Default Values

The expression ${parameter:=default} will expand to the value of the parameter named parameter - but if
that value is not set, then the value default is used. In this case, parameter is also set to default . This
means that this expression works just like the 'default values' expression above, but also sets the parameter at
the same time.

Display Error if Null or Unset

The expression ${parameter:?message} tells the shell to expand to the value of parameter , and if that value
is null or unset, to instead write the message message to standard error and exit (unless the shell is
interactive, in which case the shell is not closed).

This can be a convenient way to put a 'guard' in place to ensure that a script aborts if a value is not set. Here's
an example of how this can be used:

backup_location=${BACKUP_DIR:?Please set BACKUP_DIR to use this script}

cp -r ~/effective-shell ${BACKUP_DIR}

In this script we copy the ~/effective-shell folder to the folder set in the BACKUP_DIR parameter. However, if
that parameter has not been set then the script will abort and show an error message telling the operator
that the BACKUP_DIR parameter must be set.

Use Alternate Value

The expression ${parameter:+alternate} expands to an empty string if parameter is null or unset. However,
if parameter has a value, then the value of alternate is used instead.

Offset and Length

You can tell the shell to expand only a subset of the value of a parameter by using the ${parameter:offset}
expression. In this case, the shell will expand the value of parameter , but skip offset number of characters
from the beginning:

echo "My home folder name is: ${HOME:6}"

# The line above is expanded to:

echo "My home folder name is: dwmkerr"

You can also specify how many characters should be used by providing a length value after the offset with
the expression ${parameter:offset:length} :

echo "The error message is: ${error_message:0:64}"

In the expression above, only up to the first 64 characters of the parameter error_message will be shown.
The offset and length values can also be used with arrays:

days=("Monday" "Tuesday" "Wednesday" "Thursday" "Friday" "Saturday" "Sunday")

echo "${days[@]:2:3}"

# The line above is expanded to:

echo "Tuesday Wednesday Thursday"

It is important to note that when using this technique with arrays, you must specify the array name and then
[@] after the array name, to indicate that you want to work with all of the members of the array. If you don't
do this, the entire array is converted into a single string and the resulting string has the offset and length
applied.

Expand Variable Names

The ${!name*} expression evaluates to the name of every parameter that starts with the text name . You can
use this expression to find the full set of parameters that match a certain pattern.

How might this be useful? One nice trick is to use it to tidy up scripts. For example, if you are writing a script
and create a set of variables for internal use, you could use this expression to find the names of all of the
variables you have created and clean them up:

_es_download_folder=~/downloads
_es_backup_folder=~/backups
_es_download_address=https://effective-shell.com/downloads/effective-shell-samples.tar.gz

# At this point we might have a script that uses the variables above...

# Now clean up any variables we created.

for var_name in ${!_es_*}
do
echo "Cleaning up: ${var_name}..."
unset ${var_name}
done

This is rather an advanced technique but it does show how the 'expand variable names' expansion can be
useful.

Array Expansion

This topic is covered in detail in Chapter 19. The expression ${!array[@} expands to the indices (or 'keys') for
each item in an array:

days=("Monday" "Tuesday" "Wednesday" "Thursday" "Friday" "Saturday" "Sunday")

echo "${!days[@]}"

# The line above is expanded to:

echo "0 1 2 3 4 5 6"

This expansion is convenient if you do not know the keys that make up an array and want to loop through
them.

Parameter Length

The ${#parameter} expression expands to the length of the value in the parameter named parameter .

You can also use this expression to find the length of an array - just add the [@] subscript like so
${#array[@]} :

days=("Monday" "Tuesday" "Wednesday" "Thursday" "Friday" "Saturday" "Sunday")

echo "There are ${#days[@]} days in the array"

# The line above is expanded to:

echo "There are 7 days in the array"

You may have noticed at pattern by this point - many of the expansions that can be performed on a
parameter can also be performed on an array, just by adding the [@] subscript to the parameter name. Think
of this subscript as saying 'all of the array members' - without it the shell combines all of the array members
into a single string and performs the substitution on the result.

Remove Pattern from Front

You can use the ${parameter#pattern} expression to expand the value of parameter , removing pattern
from the front of the value:

address=https://effective-shell.com
echo "Address: ${address#https://}"

# The line above is expanded to:

echo "Address: effective-shell.com"

You can also tell the shell to remove as many sequential matches of pattern as possible, by using the
${parameter##pattern} expression. This can be useful to strip out all of the characters up to a certain point
in a parameter:

folder=/home/dwmkerr/backups/2021-10-19
echo "Today's backup folder is: ${folder##*/}"

# The line above is expanded to:

echo "Today's backup folder is: 2021-10-19"

Notice that in this example we are using an asterisk * symbol in the pattern, telling the shell to strip as many
possible characters from the beginning of the parameter up until the final forward-slash / is found.

Remove Pattern from Back

The ${parameter%pattern} expression works exactly like the expression above, but removes text from the
end of a parameter:

echo "My working directory is: ${PWD}"

 echo "My parent folder is: ${PWD%/*}"

# The lines above are expanded to:

echo "My working directory is: /home/dwmkerr/repos/github/dwmkerr/effective-shell"
echo "My parent folder is: /home/dwmkerr/repos/github/dwmkerr"

In this example we used an asterisk * wildcard in the pattern to remove all of the text from the back of the
parameter, up to and including the first forward-slash / symbol found.

We can also remove as many matches as possible, by using the expression ${parameter%%pattern} :

archive=effective-shell.tar.gz
echo "Name of archive is: ${archive%%.*}"

# The line above is expanded to:

echo "Name of archive is: effective-shell"

Notice that in this case the removal of the characters did not stop at the first period . symbol, it removed as
many characters as possible until the last period . symbol was found.

Pattern Replacement

You can also replace a pattern in a parameter by using the expression ${parameter/pattern/string} . This
can be used to perform substitutions:

message="Hello Dave"
echo "${message/Hello/Goodbye}"

# The line above is expanded to:

echo "Goodbye Dave"

There are actually a number of options available for Pattern Replacement that can control things like the
number of replacements that are performed and how arrays are treated. I would recommend not using overly
complex replacements using these types of expressions though - instead use a command like tr or sed to
make it very explicit what is going on - the built-in shell parameter replacement can be quite complex for the
reader to parse and can also vary from shell to shell.

For suggestions on alternative ways to manipulate text check Chapter 15 - Slice and Dice Text or Chapter 16 -
Advanced Text Manipulation with Sed.

Lowercase or Uppercase

You can use the ${parameter^^} expression to return the value of parameter converted to uppercase. You
can also use the ${parameter,,} expression to return the value of parameter converted to lowercase. An
example is below:

message="Hello Reader"
echo ${message^^}
echo ${message,,}
The output of this script is:

HELLO READER
hello reader

Parameter Indirection

If you want to get the value of a parameter that has an arbitrary name you can use the ${!parameter_name}
expression. This will return the value of the parameter that has the name of the value of parameter_name -
you can see this in action like so:

parameter_name="HOME"
echo "${!parameter_name}"

The output of this script is:

/home/dwmkerr

This can be very useful if you are writing scripts that will work with arbitrary or variable parameter names.

You can see more examples of how parameter expansion works, and in particular how to use parameter
expansion with the parameters to functions or scripts in Chapter 19 - Variables, Reading Input, and
Mathematics.

Command Substitution
The second form of expansion that starts with a dollar $ symbol is command substitution. This form of
expansion instructs the shell to run a specific command. The syntax is simply $(comand) .

We have seen command substitution throughout the book - in the example below we expand the date
command to print the current date:

echo "The date is: $(date)"

# The line above is expanded to:

echo "The date is: Tue Oct 19 16:49:07 +08 2021"

You may find that your scripts or commands are easier to manage if you store the results of a command in a
variable like so:

archives=$(find ~/downloads -type f -name "*.tar.gz")

In this command we store the results of the find operation in the parameter named archives .

There is an alternative syntax for command substitution that you might see. In this alternative syntax the
command is surrounded by backtick symbol. The command above could be written like so:
 archives=`find ~/downloads -type f -name "*.tar.gz"`

You may see this syntax from time to time, however I would suggest that you avoid it. The reason is that you
cannot nest commands using this syntax. If you want to run a command that itself performs command
substitution it is not possible to do so with this backtick syntax. Instead, prefer the form that uses parentheses
- such as result=$(command1 $(command2)) .

Arithmetic Expansion
The final form of shell expansion that starts with a dollar symbol $ is arithmetic expansion. This expansion can
be used to perform simple arithmetic expressions:

echo "The result of 23*4 is: $((23*4))"

echo "The result of 23*4 is: 92"

Arithmetic expansion is covered in detail in Chapter 19 - Variables, Reading Input, and Mathematics.

Word Splitting
Word splitting is a complex topic that can often cause confusion. Word splitting is the process that the shell
goes through when it takes the results of parameter expansion, command substitution and arithmetic
expansion and then attempts to split the result into 'words'. The easiest way to remember which expansions
have word splitting applied are that it is applied to any expansion that starts with a dollar symbol $ and that
does not occur within double quotes.

The fact that word splitting only occurs if a substitution does not use double quotes can also cause confusion.
Let's take a look into word splitting in detail and see when it is useful and when it can be problematic.

To see word splitting in action, we'll run a command that returns a set of words. In the example note that
there are different numbers of space characters between some of the days:

days="Monday Tuesday Wednesday Thursday Friday Saturday Sunday"

for day in "$days"
do
echo "${day}"
done

The output of this script is:

Monday Tuesday Wednesday Thursday Friday Saturday Sunday

In the expression for day in "$day" we are using shell parameter expansion to expand the days parameter.
We have surrounded $day in quotes - this means that we are telling the shell not to apply any word splitting.
This means the shell preserves the spaces in the parameter. When we loop through the parameter we have
one value only - the original set of days, including the spaces, that we set in the parameter.

Now let's run the same script but this time we will not surround $days in quotes, meaning that the shell will
perform word splitting:

days="Monday Tuesday Wednesday Thursday Friday Saturday Sunday"

for day in $days
do
echo "${day}"
done

The output of this script is:

Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday

In this case we can see that word splitting has occurred. The shell has performed the following operations:

1. First, it searches through each character in the input

2. Every time it finds a character in the IFS (Input Field Separator) special variable, it splits the word
3. If there are multiple instances of a separator character, they are removed, and replaced with a single
instance only

By default, the IFS variable is set to <space><tab><newline> . This means that any spaces, tabs or newline
characters in the input are considered as characters that the shell will use to split words. As you can see from
the example above, when we have multiple instances of these characters sequentially (such as the five space
characters after the Wednesday value), they are replaced with a single instance of the first character (a space in
this case) and then the splitting occurs.

The fact that the shell uses spaces, tabs and newlines as input field separators can sometimes cause confusion
- in particular if you have a list of files:

programs="/usr/bin/bash /usr/bin/zshell /usr/bin/new shell"

for program in $programs
do
echo "${program}"
done

The output of this script is:

/usr/bin/bash
/usr/bin/zshell
/usr/bin/new
shell

The final command, which has a space in the name, has been split into two words. You could avoid this issue
by temporarily changing the value of IFS to use a different separator for words:
 programs="/usr/bin/bash;/usr/bin/zshell;/usr/bin/new shell"
OLDIFS=$IFS
IFS=';'
for program in $programs
do
echo "${program}"
done
IFS=$OLDIFS

The output of this script is:

/usr/bin/bash
/usr/bin/zshell
/usr/bin/new shell

In this script we saved the original value of IFS into a parameter called OLDIFS , changed IFS to use a semi-
colon as a separator, ran the loop (which correctly split the programs and preserved the space in the last
program name) then change IFS back to its original value.

You should be careful when changing IFS to make sure that you change it back to its original value straight
afterwards - other programs or commands might expect IFS to be set to the default value so it should only
be changed with caution.

If you were to look at the contents of the PATH variable, which specifies the locations the shell should search
for commands, you will see that they are actually separated by colons:

$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games

The results you see will vary depending on your operating system. But the fact that they are separated by
colons means that you can easily change IFS to a colon character to get each of the paths - even if they
contain spaces:

OLDIFS=$IFS
IFS=":"
for path in $PATH
do
echo "${path}"
done
IFS=$OLDIFS

The output of this script will look something like this:

/usr/local/sbin
/usr/local/bin
/usr/sbin
/usr/bin
/sbin
/bin
/usr/games
 /usr/local/games

We will see a little more about how the shell can sometimes split up a filename with spaces (or even newlines)
in the path when we look at the final shell expansion - pathname expansion.

Pathname Expansion
When the shell encounters the asterisk * , question mark ? or open square brackets [ characters, it marks
the beginning of an expression that will have pathname expansion applied to it. We have actually seen
pathname expansion a number of times in this book - it is the expansion that occurs when we use wildcards
or patterns in shell scripts to expand a list of paths:

$ ls ~/downloads/*.tar.gz
/home/dwmkerr/downloads/aspnetcore-runtime-3.1.18-osx-x64 (1).tar.gz
/home/dwmkerr/downloads/aspnetcore-runtime-3.1.18-osx-x64.tar.gz
/home/dwmkerr/downloads/dotnet-sdk-3.1.412-osx-x64.tar.gz
/home/dwmkerr/downloads/effective-shell-playground.tar.gz
/home/dwmkerr/downloads/effective-shell-samples (1).tar.gz
/home/dwmkerr/downloads/effective-shell-samples (2).tar.gz
/home/dwmkerr/downloads/effective-shell-samples.tar.gz

This script shows all of the files in the ~/downloads folder that match the pattern *.tar.gz . The results you
see will depend on what you have in your own ~/downloads folder!

It is important to remember that the shell performs all of the types of expansion that we have described in
order. This means that word expansion is performed before pathname expansion. So if you loop through the
results of an expanded path, word splitting will not be performed on those results. We can see that with the
script below:

for $path in ~/downloads/*.tar.gz

do
echo "${path}"
done

The result of this script is:

/home/dwmkerr/downloads/aspnetcore-runtime-3.1.18-osx-x64 (1).tar.gz
/home/dwmkerr/downloads/aspnetcore-runtime-3.1.18-osx-x64.tar.gz
/home/dwmkerr/downloads/dotnet-sdk-3.1.412-osx-x64.tar.gz
/home/dwmkerr/downloads/effective-shell-playground.tar.gz
/home/dwmkerr/downloads/effective-shell-samples (1).tar.gz
/home/dwmkerr/downloads/effective-shell-samples (2).tar.gz
/home/dwmkerr/downloads/effective-shell-samples.tar.gz

Note that the spaces in the path names have been preserved - pathname expansion happens after word
splitting - so the paths themselves are left as-is.

As well as the asterisk * character, which can be used as a wildcard character in pathname expansion, there is
also the question mark ? character which means 'any single character'. You can also use expressions such as
[abc] to match on a range of characters. The exact details of how these special characters are used can be
found in man bash .

One feature of pathname expansion that people can sometimes be surprised by is what happens if the shell
finds no files that match the pattern. You can see this in action below:

$ echo ~/effective-shell/*.txt
/home/dwmkerr/effective-shell/*.txt

There are no files in the ~/effective-shell folder that match the pattern *.txt and in this case the shell has left
the text as-is. This means that you should always check the results of the expansion before assuming that the
shell has found a file!

For example, if I wanted to run the touch command on a set of files, I would do the following:

for file in ~/effective-shell/*.txt

# If the file / folder doesn't exist, skip it.
if ! [ -e "$file" ]; then continue; fi
touch "$file"
do

In this script we first check to see whether the file or folder exists by using the -e test. If the file or folder
doesn't exist then we skip through the loop. You can see more examples of this pattern in Chapter 21 - Loops
and working with Files and Folders.

Pathname expansion has limitations - if you need a more sophisticated way to search for a set of files, check
Chapter 11 - Finding Files.

Summary
In this chapter we went into the lower level details of how shell expansion works and looked at the seven
types of expansion the shell will perform on the input it is provided. Whilst we have seen many of these
expansions already throughout the book, I think it is useful to see all of them together in one place to really
understand what the shell does with the input you provide it in your commands.

Hopefully with this additional knowledge on shell expansion, you will be less likely to make mistakes around
things like word splitting, or how empty results from filename expansion are treated, which often cause
people confusion.

In the next chapter we will examine some of the limitations of shell scripting and alternatives to shell scripts
that can be useful to become familiar with.

Edit this page

Previous Next
« Part 6 - Advanced Techniques How to Avoid Scripting - A Dictionary
 Lookup in Python »

Effective Shell

Home

Donate

Community

GitHub

Twitter

Effective Shell v0.34.10. Copyright © 2024 Dave Kerr. Website built with Docusaurus.