BAPATLA WOMEN’S ENGINEERING COLLEGE::BAPATLA

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

CLASS/SEM: II\IV B.TECH - II SEM BRANCH: E.C.E (A &B)

A.Y:2022-2023
SUBJECT/CODE: MPMC\EC-224(R22)
NAME OF THE FACULTY: G.Krishnaveni

UNIT-I
1) a) Define microprocessor. Explain the brief history of evolution of µP. [L1][CO1][6M]
b) List the major features of 8085 microprocessor. [L1][CO1][6M]
2) Explain the requirement of a program counter, stack pointer and status flags in the architecture
of 8085 microprocessor. [L2][CO1]
[12M]
3) Illustrate neat block diagram of 8085 microprocessor and explain its internal architecture.
[L2][CO1][12M]
4) Draw the pin diagram of 8085 µP and explain the functionality of each pin. [L2][CO1][12M]
5) a) Draw and explain the flag register of 8085 microprocessor. [L2][CO1][6M]
b) Describe how timing and control signals are generated in 8085 µP. [L1][CO1][6M]
6) Illustrate the timing diagrams of the following 8085 µP instruction and explain them in detail.
a) MOV A, M [L2][CO1][6M]
b) MVI B, 25H [L2][CO1][6M]
7) List the various addressing modes of 8085 µP and explain each with suitable example.
[L4][CO1][12M]
8) Explain the following instructions of 8085 microprocessor with an example.
a) Data transfer instructions [L2][CO1][6M]
b) Logical instructions [L2][CO1][6M]
9) Explain the following instructions of 8085 microprocessor with an example.
a) Arithmetic instructions [L2][CO1][5M]
b) Machine control instructions [L2][CO1][7M]
10) a) Define instruction. [L1][CO1][2M]
b) Explain the instruction and data formats of 8085 µP. [L2][CO1][10M]
11) Explain the Branch, Stack & I/O instructions of 8085 µP with an example. [L2][CO1][12M]

UNIT-II

Microprocessors and Microcontrollers Page 1

1) a) List the salient features of 8086 microprocessor. [L1][CO2][6M]
b) Draw and explain the flag register of 8086 microprocessor. [L2][CO2][6M]
2) With the help of neat block diagram, describe the functionality of Bus interface unit
and Execution unit of 8086 µP. [L2][CO2]
[12M]
3) With the help of neat block diagram, explain the internal architecture of 8086 microprocessor.
[L2][CO2][12M]
4) Explain the functionality of pins used in the following modes of 8086 µP.
a) Minimum mode. [L2][CO2][6M]
b) Maximum mode. [L2][CO2][6M]
5) List the registers present in 8086 µP and discuss its functionality. [L1][CO2][12M]
6) Draw the pin diagram of 8086 µP and explain its individual pin functionality. [L2][CO2][12M]
7) a) Mention the importance for memory segmentation. [L5][CO2][2M]

Microprocessors and Microcontrollers Page 2

 UNIT-II
1a) List the salient features of 8086 microprocessor. [L1][CO2][6M]
b) Draw and explain the flag register of 8086 microprocessor. [L2][CO2][6M]
2) With the help of neat block diagram, describe the functionality of Bus interface unit and
Execution unit of 8086 µP. [L2][CO2]
[12M]
3) With the help of neat block diagram, explain the internal architecture of 8086 microprocessor.
[L2][CO2][12M]
4) Explain the functionality of pins used in the following modes of 8086 µP.
a. Minimum mode. [L2][CO2][6M]
b. Maximum mode. [L2][CO2][6M]
5) List the registers present in 8086 µP and discuss its functionality. [L1][CO2][12M]
6) Draw the pin diagram of 8086 µP and explain its individual pin functionality. [L2][CO2][12M]
a) Mention the importance for memory segmentation. [L5][CO2][2M]

b) Explain the memory segmentation of 8086 µP. [L2][CO2][10M]

7) a) Write a short note on memory of 8086 microprocessor. [L1][CO2][2M]
b) Explain the physical memory organization in an 8086 µP. [L1][CO2][10M]
8) a) Mention the features of Pentium processor. [L2][CO2][6M]
b) List the major features of the 80386 processor. [L1][CO2][6M]
9) a) List the features of 80286 processor. [L1][CO2][6M]
b) Mention the differences between 8085 and 8086 microprocessors. [L4][CO2][6M]

UNIT – III

1) With the help of neat diagrams, Describe the differences between microprocessors and
microcontrollers. [L4][CO3]
[12M]
2) a) List the features of 8051 microcontroller. [L1][CO3][8M]
b) Mention the applications of microcontrollers in everyday life. [L4][CO3][4M]
3) With the help of a neat block diagram, Explain the internal architecture of 8051
microcontroller in detail. [L2][CO3]
[12M]
4) a) Define register. Mention the need of registers in µP or µC. [L2][CO3][5M]
b) Draw the flag register of 8051 µC and describe the functionality of each flag in detail
[L2][CO3][7M]
5) Mention the various registers present in 8051 µC and explain their functionality in detail
[L2][CO3][12M]
6) Draw the pin diagram of 8051 µC and describe the functionality of each pin in detail.
[L2][CO3][12M]
7) a) Mention the importance of I/O port in a µP or µC. [L4][CO3][2M]
b) Describe the functionality of I/O ports present in 8051 µC. [L4][CO3][10M]
8) a) Explain the importance of memory in a µP or µC. [L2][CO3][2M]
b) Describe how the memory is organised in 8051 µC in detail. [L4][CO3][10M]
9) a) Define addressing mode. [L1][CO3][2M]
b) List various addressing modes of 8051 microcontroller and explain them with an example
each. [L4][CO3]
[10M]
Microprocessors and Microcontrollers Page 3
 10) a) Define counter. Mention the applications of counter [L2][CO3][3M]
b) Describe the operation of timers present in 8051 µC. [L2][CO3][9M]
11) a) Compare serial communication and parallel communication. [L5][CO3][3M]
b) Explain how the 8051 µC transfers the data using serial port. [L2][CO3][9M]

UNIT – IV

1) a) Write a short note on assembly language programming. [L1][CO4][3M]

b) Explain the moving data instructions of 8051 µC with an example. [L2][CO4][9M]
2) a) Write a short note on assembler. [L1][CO4][2M]
b) Explain various assembler directives of 8051 µC. [L2][CO4][10M]
3) a) Mention various logical operations performed in assembly language. [L2][CO4][2M]
b) Explain the logical Instructions of 8051 µC with an example. [L2][CO4][10M]
4) Explain the following operators of 8051 µC with an example. [L2][CO4][12M]
(i) Bit level (ii) Byte level
5) a) Mention the difference between Jump and Call operations. [L1][CO4][2M]
b) Explain Jump and Call instructions of 8051 µC with an example. [L2][CO4][10M]
6) a) Define interrupt. [L4][CO4][2M]
b) Write a brief description of the interrupts present in 8051 µC. [L2][CO4][10M]
7) Write an assembly program of 8051 µC to multiply two 8-bit numbers and store the result in a
memory location. [L4][CO4]
[12M]
8) a) Mention various arithmetic operations performed in assembly language. [L2][CO4][2M]
b) Explain the arithmetic Instructions of 8051 µC with an example. [L2][CO4][10M]
9) a) Describe the operation of return instruction in 8051 µC with suitable example.
[L2][CO4][3M]
b) Explain how the 8051 µC performs rotate and swap operations with an example.
[L2][CO4][9M]
10) a) Define ISR, Interrupt vector. [L1][CO4][4M]
b) Explain how the ISR is implemented with an example. [L2][CO4][8M]

Microprocessors and Microcontrollers Page 4

 UNIT – V
1) a) With a neat diagram, show the interfacing of a 4x4 matrix keypad with 8051 µC. [L4][CO5][7M]
b) Describe key bouncing problem and de-bouncing solutions. [L6][CO5][5M]
2) Describe with a schematic, the scanning of the 4x4 matrix keyboard in an 8051 based system and
identifying the key pressed. [L4][CO5]
[12M]
3) a) Write a short note on LCD Display. [L1][CO5][3M]
b) With the help of a neat diagram show the interfacing of LCD Display with 8051 µC and
explain its operation. [L4][CO5]
[9M]
4) a) List instruction command codes for programming an LCD. [L1][CO5][8M]
b) List the merits, demerits and applications of an LED display over an LCD. [L4] [CO5] [4M]
5) a) List the features of 16X2 LCD display. [L4][CO5][3M]
b) Draw and explain the pin Diagram of 16x2 LCD display. [L2][CO5][9M]
6) a) Write a short note on 7-Segemnt display. [L3][CO5][3M]
b) With the help of a neat diagram, show the interfacing of 7- segment display with 8051 µC and
explain its operation. [L2][CO5]
[9M]
7) a) Write a short note on Analog to Digital Converter. [L1][CO5][3M]
b) With the help of a neat diagram, show the interfacing of ADC 0808 with 8051 µC and explain
its operation. [L2][CO5]
[9M]
8) a) Define Interrupt and classify the interrupts. [L1][CO5][4M]
b) Explain multiple interrupts present in 8051 µC. [L2][CO5][8M]
9) a) Draw and explain briefly SCON SFR in 8051 µC. [L2][CO5][4M]
b) Explain the various modes of operation w.r.t serial port in 8051 µC. [L2][CO5][9M]
10) Design and explain any microcontroller-based system. [L4][CO5][12M]

Microprocessors and Microcontrollers Page 5