Low Voltage (Pages 21-26)
Low Voltage (Pages 21-26)
Low Voltage (Pages 21-26)
Shape of Conductor : 16 mm2 and below, conductor shall be circular stranded non-compacted.
25 mm2 and above, conductor shall be circular stranded compacted.
Insulation : Cross-linked polyethylene (XLPE) insulation as per IEC 60502-1, GP 8 as per BS 7655
o
temperature rating 90 C.
Outer Sheath : PVC outer sheath type ST2 as per IEC 60502-1 or type 9 as per BS EN 50363.
Applications : For outdoor and indoor installations in damp and wet locations. They are normally used for power
distribution in urban networks, industrial plants and energy distribution.
* The Approx. overall diameter is subject to a tolerance of (-2/+8)%. Core identification: Black.
** The Approx. weight is subject to a tolerance of ± 5%.
Shape of Conductor : 16 mm2 and below, conductor shall be circular stranded non-compacted.
25 mm2 and above, conductor shall be circular stranded compacted.
Insulation : Cross-linked polyethylene (XLPE) insulation as per IEC 60502-1, GP 8 as per BS 7655
o
temperature rating 90 C.
Outer Sheath : PVC outer sheath type ST2 as per IEC 60502-1 or type 9 as per BS EN 50363.
Applications : For outdoor and indoor installations in damp and wet locations. They are normally used for power
distribution in urban networks, industrial plants and energy distribution.
* The Approx. overall diameter is subject to a tolerance of (-2/+8)%. Core identification: Red, Black.
** The Approx. weight is subject to a tolerance of ± 5%.
www.ucic-cables.com Page 22
XLPE Insulated, PVC Sheathed Unarmoured Cables
CU / XLPE / PVC Three Core
Shape of Conductor : 16 mm2 and below, conductor shall be circular stranded non-compacted.
25 mm2 and above, conductor shall be sectoral stranded compacted.
Insulation : Cross-linked polyethylene (XLPE) insulation as per IEC 60502-1, GP 8 as per BS 7655
o
temperature rating 90 C.
Outer Sheath : PVC outer sheath type ST2 as per IEC 60502-1 or type 9 as per BS EN 50363.
Applications : For outdoor and indoor installations in damp and wet locations. They are normally used for power
distribution in urban networks, industrial plants and energy distribution.
* The Approx. overall diameter is subject to a tolerance of (-2/+8)%. Core identification: Red, Yellow, Blue.
** The Approx. weight is subject to a tolerance of ± 5%.
Shape of Conductor : 16 mm2 and below, conductor shall be circular stranded non-compacted.
(Phase) 25 mm2 and above, conductor shall be sectoral stranded compacted.
Insulation : Cross-linked polyethylene (XLPE) insulation as per IEC 60502-1, GP 8 as per BS 7655
o
temperature rating 90 C.
Outer Sheath : PVC outer sheath type ST2 as per IEC 60502-1 or type 9 as per BS EN 50363.
Applications : For outdoor and indoor installations in damp and wet locations. They are normally used for power
distribution in urban networks, industrial plants and energy distribution.
* The Approx. overall diameter is subject to a tolerance of (-2/+8)%. Core identification: Red, Yellow, Blue, Black.
** The Approx. weight is subject to a tolerance of ± 5%.
www.ucic-cables.com Page 24
XLPE Insulated, PVC Sheathed Unarmoured Cables
CU / XLPE / PVC Four Core
Shape of Conductor : 16 mm2 and below, conductor shall be circular stranded non-compacted.
25 mm2 and above, conductor shall be sectoral stranded compacted.
Insulation : Cross-linked polyethylene (XLPE) insulation as per IEC 60502-1, GP 8 as per BS 7655
o
temperature rating 90 C.
Outer Sheath : PVC outer sheath type ST2 as per IEC 60502-1 or type 9 as per BS EN 50363.
Applications : For outdoor and indoor installations in damp and wet locations. They are normally used for power
distribution in urban networks, industrial plants and energy distribution.
* The Approx. overall diameter is subject to a tolerance of (-2/+8)%. Core identification: Red, Yellow, Blue, Black.
** The Approx. weight is subject to a tolerance of ± 5%.
Shape of Conductor : 16 mm2 and below, conductor shall be circular stranded non-compacted.
25 mm2 and above, conductor shall be circular stranded compacted.
Insulation : Cross-linked polyethylene (XLPE) insulation as per IEC 60502-1, GP 8 as per BS 7655
o
temperature rating 90 C.
Outer Sheath : PVC outer sheath type ST2 as per IEC 60502-1 or type 9 as per BS EN 50363.
Applications : For outdoor and indoor installations in damp and wet locations. They are normally used for power
distribution in urban networks, industrial plants and energy distribution.
* The Approx. overall diameter is subject to a tolerance of (-2/+8)%. Core identification: Red, Yellow, Blue, Black, Green.
** The Approx. weight is subject to a tolerance of ± 5%.
www.ucic-cables.com Page 26