GeM Bidding 7145436

Bid Number/बोली मांक ( बड सं या) :
GEM/2024/B/5614151
Dated/ दनांक : 16-11-2024
Bid Document/ बड द तावेज़
Bid Details/ बड ववरण
Bid End Date/Time/ बड बंद होने क तार ख/समय 07-12-2024 13:00:00
Bid Opening Date/Time/ बड खुलने क

07-12-2024 13:30:00
तार ख/समय
Bid Offer Validity (From End Date)/ बड पेशकश

50 (Days)
वैधता (बंद होने क तार ख से)
Ministry/State Name/मं ालय/रा य का नाम Ministry Of Defence
Department Name/ वभाग का नाम Department Of Military Affairs
Organisation Name/संगठन का नाम Indian Army
Office Name/कायालय का नाम ***********
Total Quantity/कुल मा ा 225
PVC Elbow 1 inch , PVC Elbow 2 inch , Angel Cock Plastic

Make Shakti , Tank Nipple , Plastic Bib Cock Make Shakti ,
Item Category/मद केटे गर Wash Basin Wastage Pipe , PVC Plumbing Pipe 20mm , PVC
Plumbing Pipe 25mm , PVC Wall Valve Plastic 25mm , PVC
Wall Valve Plastic 20mm
GeMARPTS म खोजी गई ं ग / Searched

PVC Wall Valve
Strings used in GeMARPTS
Wall lamp, Classroom Chairs, Wall Shelves, Wall Bars, PVC

GeMARPTS म खोजा गया प रणाम / Searched
Channel, PVC gitti, Touchless Soap Dispenser (Version 2),
Result generated in GeMARPTS Soft Play Wall, Insulated Panel, Kitchen Wall Shelves
अिधसूचना के िलए चयिनत ासंिगक े णयाँ / Relevant Elbow Pipe Fitting

Categories selected for notification Pipe Cutter
MSE Exemption for Years Of

Experience/अनुभव के वष से एमएसई छूट/ and Yes
Turnover/टनओवर के िलए एमएसई को छूट ा है
Startup Exemption for Years of Experience

No
and Turnover/ अनुभव के वष से टाटअप छूट
Experience Criteria,Past Performance,Bidder Turnover,OEM

Authorization Certificate
Document required from seller/ व े ता से मांगे *In case any bidder is seeking exemption from Experience /
गए द तावेज़ Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer
1 / 10
Bid Details/ बड ववरण
Do you want to show documents uploaded

by bidders to all bidders participated in Yes
bid?/
Past Performance/ वगत दशन 10 %
Bid to RA enabled/ बड से रवस नीलामी स य कया No
Type of Bid/ बड का कार Single Packet Bid
Primary product category PVC Elbow 1 inch
Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 2 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय
Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)
Evaluation Method/मू यांकन प ित Total value wise evaluation
Arbitration Clause No
Mediation Clause No
EMD Detail/ईएमड ववरण
Required/आव यकता No
ePBG Detail/ईपीबीजी ववरण
Required/आव यकता No
MII Purchase Preference/एमआईआई खर द वर यता
MII Purchase Preference/एमआईआई खर द वर यता No
MSE Purchase Preference/एमएसई खर द वर यता
MSE Purchase Preference/एमएसई खर द वर यता Yes
1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be
exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of
quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the
"OEM Average Turnover" criteria also subject to meeting of quality and technical specifications. In case any
bidder is seeking exemption from Turnover / Experience Criteria, the supporting documents to prove his eligibility
for exemption must be uploaded for evaluation by the buyer.
2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are
2 / 10
validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small
Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and
its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the
Purchase preference, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers
offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in
this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide
eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is
not an MSE and MSE Seller (s) has / have quoted price within L-1+ 15% (Selected by Buyer) of margin of
purchase preference /price band defined in relevant policy, such MSE Seller shall be given opportunity to match
L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are
advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for
compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012
and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is
validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents
submitted.
3. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 10% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU. Copies of relevant contracts (proving supply of
cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity
supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having
highest bid value should meet this criterion.
PVC Elbow 1 Inch
Technical Specifications/तकनीक विश याँ
Specification Document View File
BOQ Detail Document View File
Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.
Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
1 *********** ***********East Sikkim 40 15
PVC Elbow 2 Inch
3 / 10
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 30 15
Angel Cock Plastic Make Shakti
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 30 15
Tank Nipple
4 / 10
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 10 15
Plastic Bib Cock Make Shakti
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 30 15
Wash Basin Wastage Pipe
5 / 10
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 20 15
PVC Plumbing Pipe 20mm
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 30 15
6 / 10
PVC Plumbing Pipe 25mm
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 20 15
PVC Wall Valve Plastic 25mm
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 5 15
7 / 10
Consignee
सं. दन
अिधकार
PVC Wall Valve Plastic 20mm
Consignee
सं. दन
अिधकार
1 *********** ***********East Sikkim 10 15
Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत
1. Generic
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.
2. Generic
After award of contract – Successful Bidder shall have to get Detailed Design Drawings approved from
buyer before starting fabrication. Successful Bidder shall submit Detailed Design Drawings for Buyer's
approval, within 5 days of award of contract. Buyer shall, either approve the drawings or will provide
complete list of modification required in the drawings within 5 days. Seller shall be required to ensure
supply as per approved Drawings with modifications as communicated by Buyer. If there is delay from
buyer side in approval of drawing– the delivery period shall be refixed without LD for the period of delay
in approval of Drawing.
3. Generic
8 / 10
Bidder shall submit the following documents along with their bid for Vendor Code Creation:
a. Copy of PAN Card.
b. Copy of GSTIN.
c. Copy of Cancelled Cheque.
d. Copy of EFT Mandate duly certified by Bank.
4. Generic
Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU for 3 years before the bid opening date. Copies of relevant contracts to be submitted along with bid
in support of having supplied some quantity during each of the year. In case of bunch bids, the primary
product having highest value should meet this criterion.
Disclaimer/अ वीकरण
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-
1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.
Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.
9 / 10
This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।
---Thank You/ ध यवाद---
10 / 10

GeM Bidding 7145436

Uploaded by

Copyright:

Available Formats

GeM Bidding 7145436

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GeM Bidding 7145436

Uploaded by

Copyright:

Available Formats

Bid Number/बोली मांक ( बड सं या) :

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 07-12-2024 13:00:00

Bid Opening Date/Time/ बड खुलने क

Bid Offer Validity (From End Date)/ बड पेशकश

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Defence

Department Name/ वभाग का नाम Department Of Military Affairs

Organisation Name/संगठन का नाम Indian Army

Office Name/कायालय का नाम ***********

Total Quantity/कुल मा ा 225

PVC Elbow 1 inch , PVC Elbow 2 inch , Angel Cock Plastic

GeMARPTS म खोजी गई ं ग / Searched

Wall lamp, Classroom Chairs, Wall Shelves, Wall Bars, PVC

अिधसूचना के िलए चयिनत ासंिगक े णयाँ / Relevant Elbow Pipe Fitting

MSE Exemption for Years Of

Startup Exemption for Years of Experience

Experience Criteria,Past Performance,Bidder Turnover,OEM

Do you want to show documents uploaded

Past Performance/ वगत दशन 10 %

Bid to RA enabled/ बड से रवस नीलामी स य कया No

Type of Bid/ बड का कार Single Packet Bid

Primary product category PVC Elbow 1 inch

Time allowed for Technical Clarifications

Inspection Required (By Empanelled

Evaluation Method/मू यांकन प ित Total value wise evaluation

EMD Detail/ईएमड ववरण

ePBG Detail/ईपीबीजी ववरण

MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता No

MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

PVC Elbow 1 Inch

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

1 *********** ***********East Sikkim 40 15

PVC Elbow 2 Inch

Technical Specifications/तकनीक विश याँ

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

1 *********** ***********East Sikkim 30 15

Angel Cock Plastic Make Shakti

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

1 *********** ***********East Sikkim 30 15

Technical Specifications/तकनीक विश याँ

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

1 *********** ***********East Sikkim 10 15

Plastic Bib Cock Make Shakti

Technical Specifications/तकनीक विश याँ

Specification Document View File

BOQ Detail Document View File

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

1 *********** ***********East Sikkim 30 15

1 * *East Sikkim 40 15

1 * *East Sikkim 30 15

1 * *East Sikkim 30 15

1 * *East Sikkim 10 15

1 * *East Sikkim 30 15

1 * *East Sikkim 20 15

1 * *East Sikkim 30 15

1 * *East Sikkim 20 15

1 * *East Sikkim 5 15

1 * *East Sikkim 10 15