SPECIFICATIONS OF 150/25t, 150/32 t ,M5 15m TRUE LIFT "EMPACT" DOUBLE GIRDER EOT CRANES

USING NORD/SEW DRIVES

AS ON 1st Oct 2009

1 SWL(MH) t 150
2 SWL(AH) t 25 32
3 Reeving (MH) 16/2
4 Reeving (AH) 8/2
5 Duty M-5 as per IS 3177 and IS 807
6 Type Double box girder EOT crane
7 Location Indoor
8 Operation From floor through pendent push button station.
9 Height of lift(MH &AH) m 15
10 Hoisting speed through VFD.(MH) mpm 1/0.1 2/0.2 3/0.3
11 Hoisting speed through VFD.(AH) mpm 5/0.5 5/0.5
12 Cross traverse speed through VFD. mpm 10 to 20
13 Long travel speed through VFD. mpm 20 to 30
14 W.R.Construction(MH) Power Form 35 P, Steel core , IWRC, UTS=2160 N/nm^2, Ungalv , RHO
W.R.Construction (AH) 6x36, Steel Core, IWRC, UTS=1960 N/nm^2, Ungalv, RHO
15 Falls(MH) 16
16 W.R.dia(MH) mm. 24
17 Falls(AH) 8
18 W.R.dia(AH) mm. 16 18
19 Motors S-4 duty, 40% cdf, 150 st. / hr, 1p 55 enclosure,
class F insulated , AC sq. cage induction motor
20 Hoist motor rating (MH) k W. 37 75 110
21 Hoist motor rating (AH) k W. 30 30
22 Cross traverse motor rating k W. 2x5.5
23 Long travel motor rating k W. from 10m to 16m span - 2x9.2
from 17m to 36m span - 2x11
24 Gear boxes Hardened and ground,Nord/SEW Make
25 Brakes DC disc, built in with hand release, 2 nos in MH
26 Cross travel power supply system Drag chain lgus make
27 Push button suspension and travel Metreel make
28 Articulation Crab articulated to ensure all four wheels bear
on CT rail
29 Cross traverse wheel dia. mm. 4x630
30 Long travel wheel dia. mm. from 10m to 36m span - 8x630
31 Recommonded LT rail size mm. from 10m to 36m span - CR 120
32 Unladen crab wt. t 30 30.6
33 CT wheel load without impact t 45 45.2
34 Crab gauge m 4.50
36 150/25 Hook approach LH (AH & MH ) mm. Hook c/c - 1000 1400 2400
Hook approach RH (MH & AH) mm. 2400 3400
37 150/32 Hook approach LH (AH & MH) mm. Hook c/c - 1100 1300 2400
Hook approach RH (MH & AH) mm. 2400 3500
38 Minimum end clearance required mm. 350
39 Limit switch Rotary and gravity operated in hoisting, lever operated in C.T. and L.T.
40 Hand railing Included
41 Buffers Hard rubber in CT. and LT.
42 Painting 1 coat of primer (yellow buff) and 1 coat of signal yellow colour (RAL 1003)
43 Voltage Power 415 V/3Ph/50Hz /AC, Control 110V/1Ph/50Hz/AC
44 Analysis table (1) (2) (3) (4) (5) (6) (7) (8) (9)
span LT wheel Crane wt Wheel Base Crane Hook Girder End
load 150/25 150/32 Crane Bogie Headroom Headroom clearance approach
(m) (t) (t) (t) (mm.) (mm.) (mm) (mm) (mm) (mm)
10 38.60 47.80 48.40 410
11 39.70 49.10 49.70 414
6100 1600 3450
12 40.60 50.80 51.40 422
13 41.30 52.20 52.80 416
Crane & Bogie wheel base and Crane headroom

14 42.00 54.40 55.00 426

Long travel wheel load without impact

15 42.70 56.10 56.70 420

6200 1700 3500
Girder clearance below LT rail top
Hook headroom & End approach

16 43.30 58.00 58.60 425

17 43.90 60.20 60.80 431
18 44.50 62.60 63.20 900
Unladen crane wt.

19 45.00 64.80 65.40 904

20 45.50 67.10 67.70 908
21 46.00 69.00 69.60 910
Height of
22 46.50 71.40 72.00 914
6350 1850 lift = LT rail 3575
23 47.00 74.20 74.80 3300 919
height
24 47.50 76.60 77.20 0.00 922
25 48.00 79.60 80.20 927
26 48.50 82.80 83.40 932
27 49.00 85.70 86.30 936
28 49.60 88.70 89.30 1405
29 50.00 91.20 91.80 1407
30 50.40 93.80 94.40 1409
31 51.00 97.60 98.20 1414
32 51.50 100.70 101.30 6400 1900 1417 3600
33 52.00 103.50 103.50 1419
34 52.50 107.20 107.20 1423
35 53.00 111.50 111.50 1428
36 53.60 114.90 114.90 1431