Scribd
Upload
10 views3 pages

Note

My hand written note

Uploaded by

hareramyadav9827
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views3 pages

Note

My hand written note

Uploaded by

hareramyadav9827
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

IS 456 : 2000

9.2.1. Design of Circular Tank: design of Dome:

Hareram  [Type the company name]  [Pick the date]


 IS 456 : 2000

 9.2.1. Design of Circular Tank:


design of Dome:

Volume(v) = (pie/4)*D2*h
Width of flange (bf)=(l/6)+bw+6Depth of flange
R={(D/2)2+h2}/(2*h)
Bending moment due to flange
Angle(0)=sin^-{(d/2)/R}
=0.36Fck*bf*Df*(d-0.42Df)
1.Meredinal stress (T) =(WR)/(1+cos0)
If B.M< B.Mf then ,design as singly reinforced
Area =T/st
Ast =B.M/{0.87 Fy *(d-0.42*0.48*d)}
2.Hoop stress (t2)= (WR){cos0-[1/(1+cos0)]}
No.of bars = Ast/{(pie/4)*12^2}
Area =T2/st
Check for shear:
Design of Wall:
V = WL/2
Hoop stress (T) =Y*H*d/2
And process as check for shear:
Area=T/st(150)

Thickness(t)
Design for Redistribution:
Ct=T/{1000t+(m-1)*area}
Eff.depth = span /12
Design of base slab:
Assumed , width (b) = depth /1,5
Assume, thickness =100mm
Load consideration: live load , dead load
Ast=0.12*B*D/100
Bending moment = WL^2 /8

Using three moment equation


Design of T-beam bridge :
Ma*L1 + 2Mb (L1+L2) + Mc*L2 =-6{(2/3)*B.M*span
Depth calculation: d= span/15 *span/2}- 6{(2/3)*B.M*span*span/2}

Width of weber (bw) = depth /3 Hence, find Mb=………

Effective span = span + support width Ma=Mb =0 ( put in equation)

Load consideration: Apply redistribution,

Live load dead load ,bitumen load, railing load , B.M re= 0.85 * B.M
pedestrian load.
The beam shoult be design for this moment
Maximum Bending Moment = WL2/ 8

 Page 1
 IS 456 : 2000

Xu=(0.87fy*Ast)/(0.36fck*b) Response reduction factor can be define as the


intensity of the sesmic wave.
Area = B.M/{0.87fy * (d-0.42Xu}
It response spectrum is a function of the natural
Check: frequency of the oscillator and of its damping.

(Xu/d)+ 0.15 < 0.6

Impact or reinforced concrete structure is


concerned about the effect ,including the
response characteristic and damage model of a
*Portal Frame method; RC structure when sublected to impact load.

Point of contraflaxure occurs at the middle of


the member.

Horizontal shear taken by each interior column


is double the horizontal shear by each of the
external column .

This forms consist of beam ,beam built


monolithically with the column.

*Cantilever method :

Point of contraflexural occurs at the middle point


of the various member.

Direct shear in the column are proportional to


there distance from the centrodial vertical axis.

Assumptions of redistribution:

The process of shifting of application of moment


in the beam is termed as redistribution.

It gives clear more realistic picture of actual


load capacity of the indeterminate structure.

Less consjection of steel

It shiult be more economical

It save from maximum deflection of beam and


stability of the structure.

 Page 2

You might also like