Thick Film Chip Resistors

UniOhm
RoHS Compliant 厚膜晶片电阻器

Feature (特性)
• Small size & light weight 短小轻薄
• Reduction of assembly costs and matching with placement machine. 可降低装置成本及配合机器组装
• Suitable for both wave & re-flow soldering. 适合波峰焊与回流焊
• Applications: Navigator (GPS), Mobile Phone,Telecom, PDA, Setbox, Meter.
应用于GPS， 移动电话，PDA，机顶盒，仪表

Figures (型状) Derating Curve & Specification

降功率曲线及性能

1. High purity Alumina substrate (高纯度氧化铝基板)

Percent rated load (%)

2. Protective coating (保护层)
3. Resistance element (阻抗元素)

负载比率(%)
4. Termination (Inner) Ni / Cr [端面(内)镍/铬层]
5. Termination (Between) Ni Barrier [端面(中)镍层]
6. Termination (Outer) Sn [端面(外)锡层(无铅)]

Ambient termperature 环境温度 (°C)

Type 类型 01005 New 0201 0402 0603 0805 1206 1210 1812 2010 2512
Max. Working Voltage
最大工作电压
15V 25V 50V 75V 150V 200V 200V 200V 200V 200V
Max. Overload Voltage
最大过负荷电压
30V 50V 100V 150V 300V 400V 500V 500V 500V 500V
Dielectric withstanding
Voltage - - 100V 300V 500V 500V 500V 500V 500V 500V
绝缘耐压
Operating Temperature
工作温度范围 -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C -55~+155°C

Type 类型 01005 New 0201 0402 0603 0805 1206 1210 1812 2010 2512
1/4W
Power Rating at 70°C 1/16W 1/10W 1/8W 1/2W 1/2W
1/32W 1/20W 1/16W (1/3W-S 1W
功 率 (1/10W-S) (1/8W-S) (1/4W-S) (3/4W-S) (3/4W-S)
1/2W-SS)
L (mm) 0.40 ± 0.02 0.60 ± 0.03 1.00 ± 0.10 1.60 ± 0.10 2.00 ± 0.15 3.10 ± 0.15 3.10 ± 0.10 4.50 ± 0.20 5.00 ± 0.10 6.35 ± 0.10
+0.15 +0.15
W (mm) 0.20 ± 0.02 0.30 ± 0.03 0.50 ± 0.05 0.80± 0.10 1.25 -0.10 1.55 -0.10 2.60± 0.20 3.20 ± 0.20 2.50± 0.20 3.20± 0.20
Dimension
H (mm) 0.13 ± 0.02 0.23 ± 0.03 0.35 ± 0.05 0.45 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.20 0.55 ± 0.10 0.55 ± 0.10
尺 寸
A (mm) 0.10 ± 0.05 0.10 ± 0.05 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.45 ± 0.20 0.50 ± 0.25 0.50 ± 0.20 0.60 ± 0.25 0.60 ± 0.25
B (mm) 0.10 ± 0.03 0.15 ± 0.05 0.25 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.45 ± 0.20 0.50 ± 0.20 0.50 ± 0.20 0.50 ± 0.20 0.50 ± 0.20
Resistance Value of
Jumper - <50mΩ <50mΩ <50mΩ <50mΩ <50mΩ <50mΩ <50mΩ <50mΩ <50mΩ
零欧姆电阻阻值
Rated Current of Jumper - 0.5A 1A 1A 2A 2A 2A 2A 2A 2A
零欧姆电阻额定电流
Max. Overload Current
of Jumper - 1A 2A 2A 5A 10A 10A 10A 10A 10A
零欧姆电阻最大过负
荷电流
Resistance Range of
0.5% (E-96) - - 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ
0.5% 的阻值范围(E-96)
Resistance Range of 1% 10Ω
(E-96) ~ 1Ω ~ 10MΩ 1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ
1% 的阻值范围 (E-96) 10MΩ
Resistance Range of 2% 10Ω
(E-24) ~ 1Ω ~ 10MΩ 1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ
2% 的阻值范围 (E-24) 10MΩ
Resistance Range of 5% 1Ω
(E-24) ~ 1Ω ~ 10MΩ 1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ 0.1Ω~10MΩ
5% 的阻值范围 (E-24) 10MΩ

1
 Thick Film Chip Resistors
UniOhm
厚膜晶片电阻器 RoHS Compliant

Marking on the Resistors Body (电阻本体字码标示)

• For 01005, 0201, 0402 size, no marking on the body due to the small size of the resistor.
01005, 0201, 0402因电阻本体太小，故本体无标示字码 153 153 = 15000Ω = 15KΩ

• ±5% tolerance product: the marking is 3 digits, the first 2 digits are the significant of the
resistance and the 3rd digit denotes number of zeros following.
±5%公差产品字码是三位数，前二位是阻值的有效数，第三位表示有几个 0
6R8
Below 10Ω: 6R8 = 6.8Ω
10Ω 以下标示: 6R8 = 6.8Ω
• 0805, 1206, 1210, 2010, 2512 ≤±1%: the marking is 4 digits, the first 3 digits
are the significant of the resistance and the 4th digit denotes number of zeros following.
0805, 1206, 1210, 2010, 2512 ≤±1%公差产品字码有四位数，前三位是阻
值的有效数，第四位表示有几个 0 2372 2372 = 23700Ω = 23.7KΩ

• Standard E-96 series values of 0603 ≤±1%: due to the small size of the resistor’s
body, 3 digits marking will be used to indicate the accurate resistance value by using the
following Multiplier & Resistance Code.
0603 ≤±1%公差 E-96系列标准阻值，因电阻本体太小，采用三位阻值代码（
3R24 Below 10Ω : 3R24 = 3.24Ω
10Ω 以下标示: 3R24 = 3.24Ω

数字）及下列指数代码（字母）配合来指明标准的阻值。

Multiplier Code (for 0603 ≤±1% marking) [指数码 ( 0603≤±1% 标示)]

Code
A B C D E F G H X Y Z
代 码
Multiplier
100 101 102 103 104 105 106 107 10-1 10-2 10-3
指 数

Standard E-96 series Resistance Value code (for 0603≤±1% marking) [E-96系列标准阻值代码（对0603≤±1%的字码）]
Value Code Value Code Value Code Value Code Value Code Value Code
阻值 代码 阻值 代码 阻值 代码 阻值 代码 阻值 代码 阻值 代码
100 01 147 17 215 33 316 49 464 65 681 81
102 02 150 18 221 34 324 50 475 66 698 82
105 03 154 19 226 35 332 51 487 67 715 83
107 04 158 20 232 36 340 52 499 68 732 84
110 05 162 21 237 37 348 53 511 69 750 85
113 06 165 22 243 38 357 54 523 70 768 86
115 07 169 23 249 39 365 55 536 71 787 87
118 08 174 24 255 40 374 56 549 72 806 88
121 09 178 25 261 41 383 57 562 73 825 89
124 10 182 26 267 42 392 58 576 74 845 90
127 11 187 27 274 43 402 59 590 75 866 91
130 12 191 28 280 44 412 60 604 76 887 92
133 13 196 29 287 45 422 61 619 77 909 93
137 14 200 30 294 46 432 62 634 78 931 94
140 15 205 31 301 47 442 63 649 79 953 95
143 16 210 32 309 48 453 64 665 80 976 96

So the resistance value are marked as the following examples ( 阻值标示如下):

1.96KΩ= 196 ×101 Ω = 29B 12.4Ω= 124 ×10 -1 = 10X

29B 10X
• Standard E-24 and not belong to E-96 series values (≤±1%) of 0603 size: the marking is the same as 5% tolerance but marking as underline.
0603≤±1%公差，在标准 E-24 系列中，但不属 E-96 系列的阻值，标示和5%的公差相同，但是在字码下多加一条线

122 = 1200 = 1.2 KΩ 680 = 68Ω

122 680
2
 Thick Film Chip Resistors
UniOhm
RoHS Compliant 厚膜晶片电阻器

Performance Specifications (性能)

Temperature coefficient 温度系数 01005: 1Ω~10Ω: ≤±600PPM/°C
10Ω~100Ω: ≤±400PPM/°C
>100Ω: ≤±250PPM/°C
0402, 0603, 0805, 1206, 1210, 2010, 2512:
0.1Ω~0.99Ω: ≤±800PPM/°C
1Ω~10Ω: ≤±400PPM/°C
11Ω~100Ω: ≤±200PPM/°C
>100Ω: ≤±100PPM/°C (0201>100Ω: ≤±200PPM/°C)
Provided Specially ( 特别提供 ): 0603: 1Ω~10Ω: ≤±200PPM/°C
0805, 1206: 1Ω~10Ω: ≤±100PPM/°C
Short-time overload 短时间过负荷 ±5%, ± 2%: ±(2.0% + 0.1Ω) Max( 最大 ).
±1%, ± 0.5%: ±(1.0% + 0.1Ω) Max( 最大 ).
Insulation resistance 绝缘电阻 ≥ 1,000 MΩ
Dielectric withstanding voltage 绝缘耐压 No evidence of flashover, mechanical damage, arcing or insulation breakdown
无击穿 , 飞弧及可见机械性损伤
Terminal bending 端子弯曲 ±(1.0% + 0.05Ω) Max( 最大 ).
Soldering heat 耐焊接热 ±(1.0% + 0.05Ω) Max( 最大 ).
Solderability 可焊性 Min. 95% coverage ( 最少 95% 覆盖率 )
Temperature cycling 温度循环 ±5%, ± 2%: ±(1.0% + 0.05Ω) Max( 最大 ).
±1%, ± 0.5%: ±(0.5% + 0.05Ω) Max( 最大 ).
Humidity (Steady State) 恒定湿热 ±5%, ± 2%: ±(3.0% + 0.1Ω) Max( 最大 ).
±1%, ± 0.5%: ±(0.5% + 0.1Ω) Max( 最大 ).
Load life in humidity 湿度寿命 ±5%, ± 2%: ±(3.0% + 0.1Ω) Max( 最大 ).
±1%, ± 0.5%: ±(1.0% + 0.1Ω) Max( 最大 ).
Load life 负载寿命 ±5%, ± 2%: ±(3.0% + 0.1Ω) Max( 最大 ).
±1%, ± 0.5%: ±(1.0% + 0.1Ω) Max( 最大 ).

• The values which are not of standard E-24 series (2% & 5%) and not of E-96 series (1%) could be offered on a case to case basis.
阻值如不在 E-24 系列 (2% & 5%) 及 E-96 系列 (1%) 可特别提供

Ordering Procedure (Example: 1206 1/4W-S 5% 1.2 Ω T/R-5000)

订购方式 (例如: 1206 1/4W-S 5% 1.2 Ω T/R-5000)

1 2 0 6 S 4 J 0 1 2 J T 5 E
Product Type ( 产品类型 ): Wattage ( 功率 ): Resistance Value (阻值): Packing Qty.
Fill-in 4 digits with the Chip resistor type Fill-in 2 digits with 5% (E-24 series) : ( 包装数量 )
as follow ( 填四位数表示下列各种 the codes as follow the 1st digit is “0”, the 2nd & 3rd digits are 1=1,000pcs
晶片电阻类型 ): ( 用下列代码填 for the significant figures of the resistance and 2=2,000pcs
0105(01005), 0201, 0402, 二位数 ): the 4th indicate the numbers of zeros following 3=3,000pcs
5% 产品 (E-24 系列阻值 ):
0603, 0805, 1206, 1210, 1812, WH = 1/32W 4=4,000pcs,
第 1 位数是 0，第 2、3 位数表示阻
2010, 2512, 2D02, 4D02, 4D03, WM = 1/20W, 5=5,000pcs
值的有效数，第 4 位表示有几个 0);
16P8, 2C02, 4C02, 4C03, 10P8, WG = 1/16W, C=10,000pcs
10S8, 10T8, 10E9 WA = 1/10W, ≤2%( E-24, E-96 series): D=20,000pcs
1W = 1W, the 1st to 3rd digits are for the significant E= 15,000pcs
W2 = 1/2W figures of the resistance and the 4th indicate
H=50,000pcs
W4 = 1/4W, the numbers of zeros following
J=60,000pcs
2% 产品 (E-24, E-96 系列阻值 ):
W8 = 1/8W,
第 1-3 位数表示阻值的有效数，第 4
SA = 1/10W-S,
位数表示有几个 0).
S8 = 1/8W-S,
S4 = 1/4W-S,
S3 = 1/3W-S, Tolerance Packing Type (包装类型): Special Feature ( 特征 ):
U2 = 1/2W-SS ( 公差 ): T = T/R ( 编带 / 卷带 ) E = Lead Free (standard)
07 = 3/4W-S D = ±0.5% B = Bulk in Poly bag ( 散装 / 袋装 ) ( 无铅标准品 )
F = ±1% C = Bulk in cassette ( 散装 / 盒装 )
G = ±2%
J = ±5%