Wind Load

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 9

MAIN WIND FORCE RESISTING SYSTEM

DIMENSIONS Basic Windspeed (Kph)


Roof Type Flat Roof 260
Parapet Height (m) 7.26
Angle 1° L/B
Length, B 16 0.46875
Width, L 7.5

WALLS
RISK CATEGORY II VELOCITY PRESSURE EX
BASIC WIND SPEED,V (m/s) 72.2222222222222 VELOCITY P
WIND LOAD PARAMETERS: COMBINED NET PRESS
0.85 Win
Wind Directionality Factor, Kd B Lee
Exposure Category 1 WIND PRES
Topographic Factor, Kzt 0.85
Gust Effect Factor, G Win
Enclosure Classification Enclosed Lee
Internal Pressure Coefficient, GCpi 0.18 -0.18
VELOCITY PRESSURE EXPOSURE COEFFICIENT, Kz
z (0-4.5) 0.57
z (6) 0.62
z (6.5) 0.63
VELOCITY PRESSURE, qz or qh
qz (0-4.5) 1549.15884259259
qz (6) 1685.0499691358
qh (6.5) 1712.22819444444
EXTERNAL PRESSURE COEFFICIENT, CP
0.8
Windward Wall
Leeward Wall -0.5
Side Wall -0.7
WIND PRESSURE, p (kPa) Case 1 Case 2
0.7745794213 1.33227660463
Windward Wall
Leeward Wall -1.01945523133 -0.41283724244
Side wall -1.32697685069 -0.71057470069
PARAPET
VELOCITY PRESSURE EXPOSURE COEFFICIENT, Kp 0.65
VELOCITY PRESSURE, qp 1766.5846451
COMBINED NET PRESSURE COEFFICIENT, GCpn
Windward 1.5
Leeward -1.0
WIND PRESSURE, P kPa
Windward 2.64987697
Leeward -1.76658465
Basic Load Combinations:(page 66)
1.4(D + F)
1.2(D + F + T)+ 1.6(L+H)+0.5(Lr or R)
1.2D + 1.6(Lr or R) + (f1L or 0.5W)
1.2D + 1.0W +f1L +0.5(Lr or R)
1.2D + 1.0E + F1l
0.9D + 1.0W + 1.6H
0.9D + 1.0E + 1.6H

where:
f1 = 1.0 for floors in places of public assembly, for live loads in excess of 4.8 kPa, and for garage

Minimim densities for Design loads from materials(page 68)


Minimum Design Deal loads(page 69)
Minimum Uniform and Concentrated Live loads(72)

Wind Load:
1. category 2
2. wind speed: V= 260 kph= #VALUE! m/s
3. kd=0.85
kzt=1
G=0.85
Exposure Classification= Enclosed Building
Gcpi= 0.18, -0.18

4. Kz or Kh= 0.914(interpolated)
5. qz= 0.613KzKztKdV^2 2483.9369
6. Cp or Cn=
windward= 0.8
leeward= -0.2955 L/B 2.09
side wall=-0.7
Cp= -1.1936, -0.18 H/L 0.86666666667
7. Wind Pressure:
For rigid Buildings:
p= qGCp-qi(Gcpi)
ess of 4.8 kPa, and for garage live load, or = 0.5 for other live loads

Slab Analysis( SECOND FLOOR):


h= 125 mm
Superimposed Dead Load:
Slab weight = 23.6(0.125) 3.54 kpa
ceiling 0.48 kpa
floor finish 1.10 kpa
partition 1.00 kpa
DL 6.12 kpa
Live Load: 4.8 kpa
L S L/S
7.5 4 1.875 <2.0, Two-way

DL= 6.12 kpa


LL= 4.8 kpa

Wu:
1. 1.4DL 8.568
2. 1.2DL + 1.6LL 15.024
Wu= 15.024 kpa

ROOF LL= 0.75KPa


Roof Live Load

You might also like