INDEX 1, Introduction 2. Embedded system: design * Embedded system life cycle © Components acquisition * System certification © Logistic & repair © Upgrades 3. Embedded system application © Military © Auto motive * Medical © Telecommunication © Consumer © Industrial 4. Embedded internet 5. ConclusionBED! YSTE! Abstract Embedded systems are increasingly becoming integral parts of almost all technology-oriented applications. Embedded systems are the unsung heroes of much of the technology we use today- video games, washing machines etc. The appliances using embedded systems are pre programmed to perform a dedicated or narrow range of functions as part of a large system, usually with minimal end user interaction and optimum performance. Embedded systems are used in navigation tools like global positioning systems (GPS), automated teller machines(ATM’s), networking equipments such as Echo cancellation, facsimile etc. the coming together of embedded systems and the internet, which made possible the networking of several embedded systems to operate as part of a large system across networks- be it a LAN, WAN, or the Internet. This convergence of embedded systems with the Internet is going to transfer the way we live. The Embedded systems are fast achieving ubiquity, blurring the lines between science fiction and hard reality.2. INTRODUCTION: Over the past decade, there has been a steady increase in the number of applications that demand customized computer systems that offer high performance at low cost. These applications are, more often than not, characterized by the need to process large amounts of data in real time. Examples include consumer electronics, scientific computing, and signal processing systems. Constraints on performance, cost and power make software implementations of data processing algorithms for such systems infeasible. Non-programmable hardware, however, does not support modifications of algorithms. The solution to this dilemma has been to develop application-specific hardware that is flexible programmable — these systems are commonly referred to as embedded systemsAn embedded system is a "behind the scenes" computer which, when combined with resident software applications, provides functionality typically focused on a single, specialized purpose. Embedded systems typically include embedded software that is burned into Eraseable Programmable Read Only Memory (EPROM) or resident in memory, special-purpose hardware, and Field Programmable Gate Arrays (FPGAs); often there are stringent requirements on power consumption, performance, and cost. Embedded systems cannot be redesigned or removed easily once the device that incorporates the system has been built. Embedded systems development thus requires concurrent work on both hardware and software components.A system can be defined as a group of devices or artificial objects or an organization forming a network especially for distributing something or serving a common purpose . To embed a system into some object means to make that system an integral part of the object. When an engineer talks about an embedded system, he or she is usually referring to a system that satisfies a well-defined need at a specific instant in time. The system is usually dedicated to that need, and its operational limits are clearly defined: lifetime, power consumption, performance, and so on. The system usually has limited capabilities for future development, simply because it is permanently installed in a device that provides a certain service to its user, Examples include DSP processors in hand-held communication devices, programmable controllers installed in robots or cars, and video signal processors in television sets. Because these systems cannot be redesigned or removed easily once the device that incorporates the embedded system is built, the development procedure must produce a correct system that meets all of its operational requirements. As stated in the introduction, some of the characteristics of embedded systems include embedded software that is burned into EPROM or resident in memory, special-purpose hardware, FPGAs, stringent requirements on power consumption, performance, and cost. Clearly, an embedded system consists of both hardware and software components. The performance and cost constraints make it necessary for the design engincer to explore a combination of possible hardware architectures or custom hardware components and software or programmable parts that would best suit the nature of the application. Hence, the division between the programmable and non-programmable components and their interface can become a critical issue in the design.3.1 EMBEDDED SYSTEM LIFE CYCLE: NEEOY OPPORTUNITY RETIREME! ae CONCEPT Dene oe DEVELOPMENT MANUFACTURING UPGRADES PROCESS DESIGN SUPPORT} PRODUCTION MAINTENANCE DEPLOYMENT FIG 1. AN EMBEDDED SYSTEM LIFE CYCLE First a need or opportunity to deploy new technology is identified. Then a product concept is developed. This is followed by concurrent product and manufacturing process design, production, and deployment. But in many embedded systems, the designer must see past deployment and take into account support, maintenance, upgrades, and system retirement issues in order to actually create a profitable design. . Some of the issues affecting this life-cycle profitability are discussed below.3.1.1 Component acquisition Because an embedded system may be more application-driven than a typical technology-driven desktop computer design, there may be more leeway in component selection. Thus, component acquisition costs can be taken into account when optimizing system life-cycle cost 3.1.2 System certification Embedded computers can affect the safety as well as the performance the system. Therefore, rigorous qualification procedures are necessary in some systems after any design change in order to assess and reduce the risk of malfunction or unanticipated sys system failure. One strategy to minimize the cost of system recertification is to delay all design changes until major system upgrades occur. As distributed embedded systems come into more widespread use, another likely strategy is to partition the system in such a way as to minimize the number of subsystems that need to be recertified when changes occur 3.1.3 Logistics and repair Whenever an embedded computer design is created or changed, it affects the downstream maintenance of the product. A failure of the computer can cause the entire system to be unusable until the computer is repaired. In many cases embedded systems must be repairable in a few minutes to a few hours, which implies that spare components and maintenance personnel must be located close to the system. A fast repair time may also imply that extensive diagnosis and data collection capabilities must be built into the system, which may be at odds with keeping production costs low. Because of the long system lifetimes of many embedded systems, proliferation of design variations can cause significant logistics expenses. For example, if a component design is changed it can force changes in spare component inventory, maintenance test equipment, maintenance procedures, and maintenance training.Furthermore, each design change should be tested for compatibility with various system configurations, and accommodated by the configuration management database 3.1.4 Upgrades Because of the long life of many embedded systems, upgrades to electronic components and software may be used to update functionality and extend the life of the embedded system with respect to competing with replacement equipment. While it may often be the case that an electronics upgrade involves completely replacing circuit boards, it is important to realize that the rest of the system will remain unchanged. Therefore, any special behaviors, interfaces, and undocumented features must be taken into account when performing the upgrade. Also, upgrades may be subject to recertification requirements. 4, EMBEDDED SYSTEMS: APPLICATIONS 4.1 Military Communications, radar, sonar, image processing, navigation, missile guidance 4.2 Automotive Engine control, brake control, vibration analysis, cellular telephones, digital radio, air bags, driver navigation systems 4.3 Medical Hearing aids, patient monitoring, ultrasound equipment, image processing, Topography 4.4 Telecommunications Echo cancellation, facsimile, speaker phones, _ personal communication systems (PCS), video conferencing, packet switching, data encryption, channel multiplexing, adaptive equalization 4.5 ConsumerRadar detectors, power tools, digital TV, music synthesizers, toys, video games, telephones, answering machines, personal digital assistants, paging 4.6 Industrial Robotics, numeric control, security access, visual inspection, lathe control, computer aided manufacturing (CAM), noise cancellation. 5. EMBEDDED INTERNET: Used in everything from consumer electronics to industrial equipment, embedded systems —small, specialized computer systems stored on a single microprocessor — are playing a major role in the growth of the Internet and the boom of wireless communication channels.Due in part to embedded systems, more and more consumer products and industrial equipment are becoming [nternet-friendly. Internet-enabled embedded systems {rare yam? pom atoa Panne pte ogress Boneereg ha ton tems ‘wolkrations, as 1 ve dora tec acer ye a tenorsThe future of embedded Internet in an unlimited array of appliances and applications designed to create, connect and make smarter the things that people use everyday. Operating in the background embedded Internet will connect home appliances to each other and to the homeowner, shop floor tools will connect to data gathering systems and hospitals will connect to laboratories, This ubiquitous computing environment is becoming a reality, with embedded systems starting to be connected to the Internet, creating a new market category of embedded Internet systems. One feature of embedding devices is the ability of appliances to send their own e-mails. For example, a fetal monitor could routinely call a hospital's computer system and transmit a daily log of fetal activity. Or a home security system could send an email to both a security service and a homeowner, informing them of a possible problem. Another feature is Web serving, where a machine tool's web page served-up information on interrupts and maintenance records.How embedded communications is going to be accomplished is part of the excitement in the unfolding of the concept. Obviously, applying lessons learned from the PC and networking will speed the adoption of embedded Internet. First, standards are key. Second, use of the Web browser as the universal interface will speed deployment and acceptance because it is familiar, requires little training and can be programmed for rich content. Third is the truth of "Metcalf's law," which states that the value of a node on a network increases exponentially as the number of nodes on that network increases. Device-to-device communications will take network connectivity into thousands of everyday items. Comprehensive, seamless, and worldwide connected embedded systems may still be a pipe dream today, but they are quickly becoming more accessible and controllable thanks to LANs, WANs, and the Internet. Many businesses are already using embedded technology te innovate with voice, video, and data traffic, hoping to set the stage for a competitive advantage in the future.6, CONCLUSIONS: Many embedded systems have requirements that differ significantly both in details and in scope from desktop computers. In particular, the demands of the specific application and the interface with external equipment may dominate the system design. Also, long life-cycles and in some cases extreme cost sensitivity require more attention to optimization based on these goals rather than maximizing the computational throughput. Recent interest in hardware/software codesign is a step in the right direction, as it permits tradeoffs between hardware and software that are critical for more cost-effective embedded systems. However, to be successful future tools may well need to increase scope even further to include life cycle issues and business issues.