QuickServer FS-QS-1XXX

Overview
QuickServer is a high performance, fully configurable, cost effective Building and Industrial Automation
gateway for integrators to easily interface devices to networks in commercial buildings and industrial
plants.
System integrators world-wide have benefited from the value of the powerful line of interoperability
gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust
FieldServer protocol conversion software on a highly cost-effective platform backed by the experience,
engineering expertise and proven technical support that integrators have come to expect from
FieldServer.
QuickServer is available in two series. The FS-QS-10XX Series is preloaded with two BAS drivers
(serial, Ethernet and/or LonWorks) from a choice of Modbus RTU, Modbus TCP/IP, BACnet/IP®,
BACnet MS/TP, LonWorks®, JCI Metasys® N2 and SNMP. Each QuickServer can handle up to 250
points.
The FS-QS-12XX Series QuickServer is available to use any Serial, Ethernet or LonWorks driver in the
extensive FieldServer driver library. The FS-QS-12XX Series can handle up to 500 points and is
available with a choice of RS-485, RS-232, KNX or M-Bus, in addition to Ethernet and LonWorks
(optional). The FS-QS-13XX and FS-QS-14XX have the same port options but the 13XX can support up
to 3,000 points while the 14XX can support up to 5,000.
Each QuickServer includes browser-based tools to make it easy to set-up QuickServer and perform
diagnostics including determination of status, network settings, node information, map descriptors and
more. The USB flash drive also includes the Discovery utility to determine what FieldServers are on a
network.

QuickServer Features and Benefits

l Interface 250-5,000 device points (see Specifications).
l Multi-configuration capability; configurations selectable via DIP
switches or software.
l Flat panel mount standard, DIN rail mount option.
l DIP switches select baud rate or node ID on the fly.
l Supports OEM proprietary protocols to BMS.
l BACnet COV support for fast data communication while
reducing the traffic over a BACnet network.
l MSA Grid - FieldServer Manager registration connects your
devices to the cloud, allowing secure remote access for
diagnostics, monitoring, alarming and configuration.
l On-board diagnostics allow easy troubleshooting for both serial
and Ethernet communications.
l FieldSafe adds a wealth of security options, including: web configuration page authentication (self-signed certificates),
robust user and password management features.

FieldServer Offers
l Largest protocol driver library in the industry, providing the solution to your integration needs.
l Over 10 years of experience in design and manufacture of building automation gateways with thousands of installations,
over 700 translation paths using over 100 protocol drivers.
l Trusted, proven technical support before and after shipment.
l FieldServer partners with BAS and Fire Alarm Panel manufacturers and trade associations to ensure that the drivers and
hardware meet your highest industry expectations.

MSA is a registered trademark of MSA Technology, LLC in the US, Europe Propel Item No: T18400
and other Countries. For all other trademarks visit
https://us.msasafety.com/Trademarks. Revision: 2.F
FieldServer Data Sheet – QuickServer FS-QS-1XXX

Accessories
l Optional Accessory Kit includes AC power supply, DIN mounting bracket assembly, Ethernet cable, mini-screwdriver
and a USB flash drive with all data sheets, manuals, notes, the discovery tool and more.

Interface Connections
QuickServer
RS-2321 RS-4852 KNX5 M-Bus Ethernet3 LonWorks4
FS-QS-1X11 1 1 1
FS-QS-1221 1 1 1
FS-QS-1240 1 1 1
FS-QS-1241 1 1 1
FS-QS-1X50 1 1 1
FS-QS-1X51 1 1 1
1 TX/Rx/GND 2 +/-/Frame Ground 3 10/100 Base T 4 FTT10 5 KNX/EIB TP1

Hardware Specifications
Power Requirements Physical Dimensions Approvals
9-30 VDC or 12-24 VAC H x W x D: 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm) CE and FCC Part 15 B & C
(M-Bus = 12-24VDC) Weight: 0.4 lbs (0.2 Kg) BACnet marked and UKCA compliant
Current Draw: FS-QS-12X0: @ 12V = 240 mA Other LonMark certified (FS-QS-1011 and FS-QS-12X1)
FS-QS-1X11, FS-QS-12X1: @ 12V = 250 mA Configuration/Diagnostic utilities UL 916 and CAN/CSA C22.2
FS-QS-1230: @ 15V = 200 mA Table, Wall or DIN rail mount RoHS3 and WEEE compliant
FS-QS-1231: @ 15V = 210 mA Communication GOST-R and KC certified
M-Bus: Slave:550 mA @ 12V Baud: 4800, 9600, 19200, 38400, 57600, 115200 DNP 3.0 and Modbus conformance tested
Master (1 Slave): 580 mA @ 12V Start Bit: 7, 8 Stop Bit: 1,2 Parity: Even, Odd, None
Master (64 Slave): 980 mA @ 12V LonMark Certification (FS-QS-1XX1-XXX)
Environment SPID: 80:00:95:46:00:84:04:01
Operating Temperature: -40 to 75°C (-40 to 167°F) Profiles: 0000 – Node object (1)
Relative Humidity: 10-90% RH non-condensing 0001 – Open Loop Sensor Object (5)
Capacity 0003 – Open Loop Actuator Object (5)
FS-QS-11XX: 250 points FS-QS-13XX: 3000 points Ethernet:10/100 BaseT
FS-QS-12XX: 500 points FS-QS-14XX: 5000 points Serial Port Isolation
- 1500v galvanic isolation

Options
The Accessory Kit consists of a power supply, Ethernet cable, screwdriver, DIN rail mount and a USB flash drive that includes all manuals, data
sheets, notes and the discovery tool.
FS-8915-36-QS Accessory Kit, 110/220V

Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference

BACnet® is a registered trademark of ASHRAE

LonWorks® is a registered trademark of Echelon Corp
Metasys® is a registered trademark of Johnson Controls, Inc.
KNX is a trademark of KNX Association

MSA Safety
1991 Tarob Court, Milpitas, California 95035 USA
O. +1 408 262-6611 TF. +1 800 727-4377 E. [email protected]
www.MSAsafety.com