Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Annex A Wood Specifications & Accepted Crack Details

    Uploaded by

    Abdullah

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Annex A Wood Specifications & Accepted Crack Details

    Uploaded by

    Abdullah
    12 views2 pages

    Original Title

    Annex A Wood specifications & Accepted Crack Details

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    Annex A Wood Specifications & Accepted Crack Details

    Uploaded by

    Abdullah

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ITB/BO/YEMSA/23/01 - Annex A

    Annex A
    Details of the accepted cracks of the wooden Poles & Plates (Sawn wood)

     Below specifications and tolerances limits will be applied on bundle by


    the inspection Company during receiving the qty of delivered timbers
    by the suppliers.
    Notes:
    - Bundle of poles contains 196 pcs almost (±10 pcs)
    - Bundle of plates contains between 500 to 550 pcs almost.
     Inspection Mechanism:
     Firstly: Wooden Poles: Bundle of wooden poles
     Initially: the acceptable bundles
    1- The acceptable bundle must be contained 60% free of cracks, if more: Rejected, with noted that
    presence of minor surface cracks (i.e. lattice cracks) are counted free of cracks.

    e.g., if the bundle (196pcs) of poles contains 117 pcs or more free of cracks, then the bundle is
    considered accepted, if less, then the bundle will be rejected.

    2- Shake: Allowable limit 3.5 cm (1/2 thickness)


     Acceptable cracks in the 40% (remaining in bundle) should be according to the Width
    following tolerance range:
    a. End Split: Longest split, 20 cm at each end.
    b. Dimensions of cracks in section of each pole 7x7 cm Depth
    Width: up to 5.0 mm in max 7.0 cm
    depth: up to 25.0 mm in max
    c. The cracked pole is considered rejected if the results of points a and b
    more than the tolerances limits.
    d. If the number of rejected cracked poles less than or equal 25% out of the 7.0 cm
    40% then the bundle will consider accepted, if more: Rejected

     Secondly: Wooden Plates:


     Initially: the acceptable bundles
    1- The acceptable bundle must be contained 96% free of cracks per bundle, if more: Rejected
    2- Minor cracks: Presence of minor surface cracks (i.e. lattice cracks) is considered acceptable.
    3- Only the minor cracks are acceptable, any other cracks are considered unacceptable.
    4- If the number of the rejected plates is more than 4% in each bundle, then the bundle is considered
    Rejected.

    END
    Unsound knot
    Sound (loose or Compression
    knot fractures
    Split

    Wane

    Sloping grain
    Checks
    Want
    Shake Decay
    ITB/BO/YEMSA/23/01 -Annex A1

    Technical specifications of the timbers


    Annex A1 3
    For TESK & ESK and Transitional shelters 2022
    s/n Items name Item Description UoM Comments

    Timber Specifications:
    Dimensions: 7x7 cm or more (section size) 7 cm
    Length of pole: 300 cm (± 3 cm in length only)
    Color: white or brown. 7 cm
    Wooden Pole
    Quality: hard quality, Heartwood
    1 7x7x300 cm 1
    Treatment: the wood must be certificated that was treated all parts of each pole against the termite and insects.
    Type: Sawn wood
    Moisture Level: dry as much as possible with moisture level (if any) must be between 9% to 15%.
    Shake, Cracks:
    Free of crack as much as possible, with accepted percentage of cracks per bundle (196pcs almost), according to the
    details in Annex (A)

    wooden plates:
    Dimensions:
    Plate width: 10 cm (±3 mm in width) 2.2 cm
    Plate thickness: 2.2 cm (±1 mm in thickness)
    Plate length: two types 10 cm
    Wooden Plate Type 1: 300 cm (± 3cm in length)
    10x2.2x300 cm Type 2: 400 cm (± 3cm in length)
    2 1
    10x2.2x400 cm Color: white or brown.
    Type: Sawn wood Quality: hard quality
    Treatment: the wood must be certificated that was treated all parts of each plate against the termite and insects.
    Moisture Level: dry as much as possible with moisture level (if any) must be between 9% to 15%.
    Shake, Cracks:
    Free of crack as much as possible, with accepted percentage of cracks per bundle (500 -550 pcs almost), according to
    the details in Annex (A)

    You might also like