Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    Transmisor de Presion Diferencial DM 2000 - Dwyer - InProcess

    Uploaded by

    himobelibusa
    Transmisor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Transmisor de Presion Diferencial DM 2000 - Dwyer - InProcess

    Uploaded by

    himobelibusa
    1 views1 page
    Transmisor

    Original Title

    Transmisor-de-presion-diferencial-DM-2000_Dwyer_InProcess

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Transmisor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1 views1 page

    Transmisor de Presion Diferencial DM 2000 - Dwyer - InProcess

    Uploaded by

    himobelibusa
    Transmisor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PRESSURE

    SERIES DM-2000

    DIFFERENTIAL PRESSURE TRANSMITTERS


    Same Size as Standard Magnehelic Differential Pressure Gage
    ®

    HIGH PRESSURE PORT

    1-1/4
    [31.75]

    LOW PRESSURE PORT

    7/16
    [11.11] ø4-3/4
    17/32 [120.65]
    [13.50] 5/32
    [3.97]
    DM-2000-LCD DM-2100-LCD 1-11/16
    [42.86]

    The Dwyer Series DM-2000 Differential Pressure Transmitters sense the pressure SPECIFICATIONS
    of air and compatible gases and sends a standard 4-20 mA output signal. The DM- Service: Air and non-combustible, compatible gases.
    2000 housing is specifically designed to mount in the same diameter cutout as a Wetted Materials: Consult factory.
    standard Magnehelic® gage. A wide range of models are available factory calibrated Accuracy: ±1% FS, ±30 Pa model ±4% FS at 70°F.
    to specific ranges. Stability: ±1% FS/yr.
    Pressure connections are inherent to the glass filled plastic molded housing making Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
    installation quick and easy. Digital push-button zero and span simplify calibration over Pressure Limits: 10 psig (0.69 bar).
    typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering ­Thermal Effect: ±0.055% FS/°F (0.099% FS/°C), ±30 Pa model ±0.13% FS/°F
    units. A single push-button allows field selection of 4 to 6 engineering units depending (0.234% FS/°C).
    on range. Power Requirements: 10-35 VDC (2 wire).
    Output Signal: 4-20 mA.
    FEATURES/BENEFITS Zero and Span Adjustments: Digital push-button zero and span.
    • Zero and span controls provide easy calibration checks and shorter installation time Loop Resistance: DC: 0 to 1250 Ω maximum.
    to get device running and monitoring Current Consumption: DC: 38 mA max.
    • Quick response to pressure changes means no delay in signaling and alerting to Electrical Connections: Screw-type terminal block.
    critical situations

    Differential Pressure Transmitters,


    Display: 3.5 digit LCD, 0.7˝ H.
    • Easy to read LCD display provides immediate local alerts allowing corrective action Process Connections: 1/8˝ ID tubing.
    to be taken quicker to eliminate the problem from becoming widespread Mounting Orientation: Vertical.
    • Same size as Magnehelic® simplifies field upgrade to digital pressure gage by Weight: 4.8 oz (136 g).
    reducing install steps

    Air & Gas


    • Tamper proof button configuration to prevent accidental changes to the settings

    APPLICATIONS
    • Differential pressure across filters
    • Fan control
    • Static pressures in ducts or buildings
    MODEL CHART
    Model Range (in w.c.) Pa mm w.c. mBar kPa psi
    DM-2001-LCD 0 to .100 24.9 2.54 .249 - -
    DM-2002-LCD 0 to .250 62.2 6.35 .622 - -
    DM-2003-LCD 0 to .500 124.3 12.70 1.243 .124 -
    DM-2004-LCD 0 to 1.000 249 25.4 2.49 .249 -
    DM-2005-LCD 0 to 2.00 497 50.8 4.97 .497 -
    DM-2006-LCD 0 to 3.00 746 76.2 7.46 .746 .108
    DM-2007-LCD 0 to 5.00 1243 127-0 12.43 1.243 .180
    DM-2012-LCD 0 to ±.250 0 to ±62.2 0 to ±6.35 0 to ±.622 - -
    DM-2013-LCD 0 to ±.500 0 to ±124.3 0 to ±12.70 0 to ±1.243 - -
    DM-2019-LCD 0 to ±.200 0 to ±49.8 0 to ±5.08 0 to ±.498 - -
    Note: For white overlay change -20 to -21. Example: DM-2102-LCD

    ACCESSORIES OPTIONS
    Model Description To order add suffix: Description
    A-299 Surface mounting bracket -NIST NIST traceable calibration certificate
    A-300 Flat flush mounting bracket Example: DM-2002-LCD-NIST
    A-302F-A 303 SS static pressure tip with mounting flange; for 3/16˝ -FC Factory calibration certificate
    ID rubber or plastic tubing; 4˝ insertion depth; includes Example: DM-2002-LCD-FC
    mounting screws
    A-320-A Instrument enclosure
    A-489 4˝ straight static pressure tip with flange
    SCD-PS 100-240 VAC/VDC to 24 VDC power supply

    Process Tubing Options: See page 453 (Gage Tubing Accessories)

    DWYER INSTRUMENTS, INC. | dwyer-inst.com 63

    Pressure_2021.indb 63 7/15/20 8:19 AM

    You might also like