Section 16775

Security Management System Integrated Digital Ip Surveillance, Access

ControlSystem & Security Management System

PART 1 GENERAL
General provisions of the Contract including requirements of all Contract Documents
shall apply to this section.

1.01 RELATED DOCUMENTS

A. Contract

1. Drawings and general provisions of the Contract, including

Conditions ofContract, apply to this Section.

2. In particular, refer to these documents for all elements

related to costs and responsibility related to delivery, storage, and
roll-out phase.

3. Contractor is responsible for Complying with MOI and MOH

regulationsand requirements

1.02 DEFINITIONS

A. AC: Access Control.

B. CCD: Charged Coupled Device.

C. CCTV: Closed Circuit Tele Vision.

D. CU: Control Unit.

E. EMI: Electromagnetic Interference.

F. EN: European Standard.

G. FCC: Federal Communications Commission.

H. FTP: File Transfer Protocol.

I. GUI: Graphical User Interface.

J. HMI: Human Machine Interface.

K. IEC: International Electro-technical Commission.

L. IP: Internet Protocol.

M. ISO: International Standard Organization.

Security Management System 16775-1

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 N. LAN: Local Area Network.

O. MTTR: Mean Time To Repair.

P. MTBF: Mean Time Between Failures.

Q. NFPA: National Fire Protection Association.

R. NMS: Network Management System.

S. PTZ: Pan, Tilt, Zoom Camera.

T. QoS: Quality of Service.

U. SCN: Structured Cabling Network.

V. SNMP: Simple Network Management Protocol.

W. SMTP: Simple Mail Transfer Protocol.

X. STP: Shielded Twisted Pair (some refer to this item as FTP: Foil-shielded
TwistedPair).

Y. SLA: Service Level Agreement.

Z. UL: Underwriters Laboratories.

AA. UPS: Uninterrupted Power System.

BB. UTP: Unshielded Twisted Pair.

CC. VLAN: Virtual LAN.

DD. VPN: Virtual Private

EE. WAN: Wide Area Network.

FF. WWW: World Wide Web.

1.03 SHOP DRAWINGS

A. Submit three blueline/blackline sets and one reverse paper set of

ShopDrawings.

B. Produce all Design Drawings and Shop Drawings using the latest
version ofAutoCAD.

C. Do not reproduce Contract Documents for use as Shop Drawings. Unless

specifically authorized by the Architect in writing, contract documents

Security Management System 16775-2

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 shall not be acceptable as shop drawings.

D. Shop Drawings shall include the following:

1. A drawing legend sheet describing all symbols used on the drawings

and containing a description of each device, complete with
manufacturer name and model number

2. System riser diagram with all devices, wire ruins and wire
designations data flow etc.

3. Schematic block diagrams for each system show all

equipment(typical), interconnects, data flow etc.

4. Wiring diagrams of each subsystem define the interconnection of

allinputs and outputs for all equipment. Diagrams shall indicate
exact equipment counts.

5. Wiring diagram for fail-safe release of electric locking mechanisms.

6. Fabrication shop drawings for all custom equipment (if applicable).

7. Plans and elevations of the security console(s) and equipment

racks quantifying all equipment to be mounted there in and
including notesdetailing the fabrication of such. All materials,
methods for construction and finishes shall be fully detailed.

8. Elevations of security closet layouts showing panel locations,

power supply locations, conduct wire ways, wire molds, and all
other equipmentto be mounted at each location.

9. The scope of the drawings shall remain in the scope of the Security
Contractor; the only exception allowed is the containment drawings
andpower drawings which are to be prepared by the
Electrical/Contractor.

1.04 OPERATION AND MAINTENANCE MANUALS

A. The Operation and Maintenance Manual shall apply to all

security relateddevices, equipment and software modules.

B. Operation and Maintenance manuals shall be in electronic format as

greedwith Planning Supervisor.

C. Operation and Maintenance Manuals shall include, at a minimum, the following:

1. Manufacturer's operation manuals for each piece of equipment

installed. Simple product data sheets without operation
instructionsand / or sales literature shall not be acceptable in
Operation and Maintenance Manuals.

2. Operational description of each Subsystem.

Security Management System 16775-3

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 3. Detailed programming descriptions for each subsystem, including
step bystep procedures with illustrations identifying how computer
screens will appear after each entry.

4. Explanations of subsystem interrelationships. Explanations shall

include operations of each subsystem and operations unique to
the interfaces between each of the subsystems and possible
conflicts that mayoccur with the interfaces. Each explanation shall be
identified, tagged, bound and indexed into a single binder.

5. Electrical schematics for each piece of equipment specified.

6. Setup procedures for each component of the subsystems.

7. A list of manufacturers, their local representatives and sub-

contractors that have performed work on the Project. The list shall
include contact names, phone numbers and address for each.

8. Installation and service manuals for each piece of equipment.

9. Maintenance schedules for all installed components. Schedules

shallinclude inspections and preventative maintenance
schedules, and documentation of all repaired or replaced
equipment.

10. Operation and Maintenance Manuals shall include a separate section

for each software program incorporated into the Project. The Software
sectionshall include, at a minimum, the following information:

11. Definitions of all software related terms and functions.

12. Description of required sequences.

13. Directory of all disk files

14. Description of all communications protocols, including data

formats,command characters, and a sample of each type of data
transfer.

15. Instructions for manufacturers supplied report generation with

illustrations showing what reports should look like and
screen illustrations for each entry made.

16. Instructions for custom report generation

17. Database format and data entry requirements.

1.05 QUALITY ASSURANCE

A. Contractor Qualifications

1. Work specified herein shall be the responsibility of a single electronic

Security Management System 16775-4

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 security systems integration contractor. Bidders shall document a
minimum of five years’ experience in the fabrication, assembly and
installation of systems of similar complexity as specified herein. This
requirement shall apply equally to suppliers and manufacturers of
the security subsystems and major components to be used on this
project. Thedocumentation shall include the names, locations and
points of contact for at least three installations of the type and
complexity specified herein. Bidders shall indicate the type of each
referenced system and certify that each system has performed
satisfactorily in the manner intended for a period of not less than 24
months.

2. The contractor shall have local in-house engineering and project

management capabilities consistent with the requirements of the
work.
The contractor shall provide a team managed by a full time Senior
Project Engineer who is to be present on site at all times that work is
actively in progress. The team and the project manager shall stay
the same throughout the course of the Project. The project team
manager shall bethe person responsible for system programming,
preparation of operationand maintenance manuals, training
programs and schedules and test protocols, documentation of
system testing, maintenance of Record documentation and
coordination and scheduling of all subcontract labor (as applicable
and as approved in advance by the Architect.) The Architect reserves
the right to approve the Contractor's Senior Project Engineer.

3. By submitting a Bid, the contractor thereby certifies that it is qualified

in all areas pertaining to, either directly or indirectly, the work. In
the event theContractor becomes unable to complete the work in
accordance with the contract documents, or the satisfaction of the
Employer or its representatives, due to a lack of understanding of
equipment, systems or services required by the Contract documents, it
shall be the responsibility of the Contractor to retain the services of
the applicable manufacturers’ representatives to expeditiously
complete the work in accordance with the Architect's construction
schedule with no additional cost to the Employer.

4. The contractor shall ensure compliance with, and a thorough

understanding of, all local codes and contract conditions pertaining
to thisProject.

5. The contractor should maintain an inventory of spare parts and

other items critical to system operation and as necessary to meet
the emergency service requirements of this Project within the local
service center.

Security Management System 16775-5

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
1.06 PRODUCT STANDARDS

A. Within this Specification, certain manufacturers have been specified. These

manufacturers are listed for example purposes only (unless followed by
"No Exceptions"). The contractor is encouraged to substitute
manufacturers and models that may be more cost effective or readily
available than that specified. All substitutions shall meet or exceed the
minimum functional and technical specifications. No Deviation to the
specification shall be allowed. Acceptance ofsuch substitutions is at the
discretion of the Architect.

B. Provide at the time of installation the latest version of all

equipment andsoftware. Discontinued equipment shall not be
acceptable.

C. All exterior devices shall be sealed and protected against all weather
conditions including heat, cold, moisture, dust, and sand.

Security Management System 16775-6

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
1.07 WARRANTY

A. Provide a 3 years warranty on the work. If, within

one year after the date of final acceptance of the
work or within such longer period of time as may be
prescribed by law, or by the terms of any applicable
special warranty required by the contract documents or
provided by a manufacturer, any of the work or
equipment is found to be defective or not in
accordance with the Contract Documents, the
Contractor shall correct it promptly including all parts
and labor after receipt of notice from the Employer to
do so unless the Employer has previously given the
contractor a written acceptance of such condition. This
obligation shall survive termination of the contract. The
Employer will give such notice promptly after discovery
of the condition. Such notice shall be provided by
Employer representatives, to be identified either
verbally or in writing.

B. Nothing contained in the contract documents shall be

construed to establish a shorter period of limitation
with respect to any other obligation which the
contractor might have under the contract documents
or any manufacturer's warranty. The establishment of
the time period of one year after the date of final
acceptance of the work or such longer period of time
as may be prescribed by law or by terms of any
warranty required by the contract documents, relates
onlyto the specific obligation of the contractor to
correct the work equipment, and has no relationship
to the time within which its obligation to comply with
the contract documents may be sought to be enforced,
nor to the time within which proceedings may be
commenced to establish the contractor's liability with
respect to its obligations other than specifically to
correct the work or equipment.

SECURITY MANAGEMENT SYSTEM 16775-7

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 C. Perform preventive maintenance during the
warranty period. Submit a list of items to be included
in the preventive maintenance program. The list
shall include maintenance to each item, the frequency
of such maintenance, and the amount of time to be
spent on each item for maintenance.

D. Repair or replacement service during the warranty

period shall be performed as follows:

1. 7 days, 24 hour, 4 hour response time.

E. This applies to all system components.

F. If the contractor is unable to restore system

operation during the warranty period within two
business days of a system failure, the Employer
reserves theright to require the contractor to
provide on-site manufacturer's service technicians
at no additional cost

1.08 REFERENCES

A. Canadian ICES-003

B. Consultative Committee for International Radio (CCIR)

C. Conformity for Europe (CE)

D. Electronic Industry Association (EIA)

E. Federal Communications Commission (FCC)

F. Joint Photographic Experts Group (JPEG)

G. National Television System Committee (NTSC)

H. Phase Alternation by Line (PAL)

I. Underwriters Laboratories Inc. (UL)

SECURITY MANAGEMENT SYSTEM 16775-8

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 SECURITY VIDEO SURVEILLANCE SYSTEM

PART 2 PRODUCTS

2.01 APPROVED MANUFACTURERS

A. Manufacturers subject to compliance with the requirement of the contract

documents, use only firms regularly engaged in manufacture of Security Video
Surveillance System (CCTV), of types and capacities required which have been in
satisfactory use in similar or service for not less than ten (10) years and approved by
the Architect/ Engineer.

2.02 GENERAL

A. All equipment and materials used shall be standard components that are regularly
manufactured and used in the manufacturer’s system.

B. All systems and components shall have been thoroughly tested and proven in actual
use.

C. All systems and components shall be provided with the availability of an authorized local
distributor or integrator.

2.03 VIDEO MANAGEMENT SYSTEM CAPABILITIES

A. The following describes the general architecture and basic functionality deemed
essential for the IP video management system described in this specification.

B. The IP video management system should be built upon open, industry standards
and facilitate integration with IT infrastructures and other digital and analog
systems.

C. Necessary API-SDK shall be available for the proposed VMS. Along with it, there shall
be a dedicated portal maintained by the manufacturer to offer any support required
for any third-party integration.

D. The IP video management system shall provide support for IP cameras from multiple
manufacturers. As a minimum the VMS shall support ONVIF profile S. If VMS is
provided from the same manufacturer as the cameras, then no additional hardware
or license would be needed to connect to third party cameras.

E. The IP video management system shall support standard resolution and megapixel
IP cameras.

SECURITY MANAGEMENT SYSTEM 16775-9

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
F. The IP video management system shall have no restriction as to the frame rate, or
number of standard resolution or mega pixel cameras that can be recorded, viewed, and
managed on the system.

G. All components of the IP video management system shall be based on Windows®

operating systems.

H. The system shall be fully distributed in nature.

I. It shall be possible to use Multicast streams.

J. The IP video management system shall support sequences running on any network
monitor. Alarms or user intervention shall be capable of interrupting a running
sequence.

K. Operator control of a camera or selection of monitors shall override the sequence

control of camera or monitor; sequence control of cameras or selection of monitors
shall not override operator control of camera of selection of monitors.

L. The IP video management system shall log all alarms and events in the system
manager database.

M. The IP video management system shall provide for virtual matrix functionality,
leveraging the IP network to switch any camera to any monitor through a PC
Keyboard/Mouse.

N. The IP video management system shall utilize a system manager to provide user and
database management. The system manager can be a dedicated server or it can be
installed along with the recording server. The database shall be synchronized all the
time and shall be available at all times in all servers. Failure of any server shall not
affect the system operation.

O. The IP video management system shall be able to handle future expansion of an

unlimited total capacity from what is shown in the drawings, including but not limited
to cameras, monitors, alarm circuits, and relay closures.

P. The IP VMS shall support LDAP to allow importing of user information from active
directory.

Q. A dedicated integration module shall allow the VMS to integrate with other systems such
as the Access control system, Building management system and Call for Assistance.

R. An event from access control shall allow to trigger events such as create spot,
sequence, start recording, stop recording, switch streams or even pop-up a
layout/drawing associated with that camera. The VMS shall allow receiving of events
and alarm status of Access control & CFA.

S. The VMS shall integrate with building management system to provide status of system
health and events through open protocol such as OPC & SNMP.

SECURITY MANAGEMENT SYSTEM 16775-10

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 T. The VMS shall be capable to export/send the system logs to any centralized log server
through the network via SNMP traps/equivalent mechanism.

U. The VMS shall support advanced search functions to reduce the search time. It should
be able to summarize the video data from the recorded video by extracting the events
that occurred in a particular time and area.

V. This feature shall utilize the Meta data generated by the cameras.

W. Users shall be able define areas or draw lines on the recorded frame and search
based on enter, exit or motion detection.

X. The VMS shall support Google Map integration. This feature shall provide
location-based surveillance for a city or a large complex. It shall allow monitoring
the location of camera, devices, alarms and events on a single screen. It shall allow
creation of layers, drag & drop icons on google map and set home position.
Google map shall also be integrated with the event viewer and shall be displayed
along with the event information. It shall allow measurement of distance
between two points on the google map.

Y. The IP video management system network shall be arranged so each area will operate
independently and shall communicate via a 1000baseT (Giga-bit) network at a minimum
to the System Manager. The system shall utilize virtual matrix switcher. The System
Manager shall provide a user interface and database management of the IP video
management system. The System Manager shall allow for users to be restricted via
software to logical configurable groups of cameras, monitors and system
operations.

2.04 6 MEGAPIXEL FULL HD INDOOR/OUTDOOR NETWORK IR DOME CAMERA

A. General
1. The camera shall be of a dome type suitable for internal installation.
2. The camera shall feature an Adaptive Infrared illumination system with 12
LEDs giving a viewable distance of 25m in complete darkness.
3. The network camera shall feature up to 6 Mega Pixel resolution and shall also
support Full HD (1080p) resolution in a 16:9 format.
4. The camera should be capable of capturing and transmitting an image size
of 2688 x 1520 (5Mpix) resolution at 30fps and shall be capable of 1920 x 1080
at 25 images per second.
5. The camera shall be capable of simultaneously streaming two 1080p video
streams, each at 30 images per second.
6. The camera shall feature a day / night mode that incorporates an infrared
cut filter removal mechanism for true color reproduction and the best
possible low light performance.
7. The cameras shall feature the Simple Focus automatic motorized focus
adjustment. This should be activated by a button on the camera and
remotely through the network interface. This can also be activated when the

SECURITY MANAGEMENT SYSTEM 16775-11

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 camera changes from day to night mode.
8. The camera shall feature a 3 - 8.5mm motorized varifocal lens with a
maximum aperture of 1.2Lux. The lens mentioned is only an indication of
standard lens. The actual lens shall be selected by the contractor based on
the FOV requirement of each area.
9. The camera shall feature Wide Dynamic Range with a gain of 120db. This
feature will work at 30 images per second at 2688 x 1520 (5Mpix) resolution. The
WDR function shall feature an adaptive motion system to eliminate motion
blur.
10. The camera shall feature a high performance 2D & 3D noise reduction that
automatically adapts the type of technology used according to movement in
the field of view. 2D noise reduction compares adjacent pixels while 3D
technology compares the same pixel in the previous and subsequent images,
giving a higher level of detail. When the camera detects movement in a region
of the image it will apply 2D noise reduction to that area and 3D noise reduction
to the remainder of the image.
11. The camera shall feature an automatic back light compensation technology
that detects and enhances dark areas in the field of view and increases the
gain in those areas.
12. The camera shall feature built in license free video analytics functions
including line crossing, appear/disappear, audio detection, camera tamper
(scene change) and enter/exit a predefined zone.
13. The camera shall feature advanced motion detection with definable
detection areas, minimum / maximum object size definition and a learning
algorithm that ignores false alarms such as trees and waves on water.
14. The camera shall support Multi Cropping technology to allow video profiles to
be set up with a reduced area of the overall field of view of the camera.
15. The camera shall feature a face detection technology that can be used to
create an event whenever there is a face or multiple faces in the image. The
technology should be able to detect 32 faces simultaneously.
16. The camera shall feature 32 privacy zone mask areas.
17. The camera shall feature a smart codec that can use a higher quality
compression for regions of interest in the image, thereby prioritizing the
encoding of the most important areas of the field of view.
18. The camera shall feature a Digital Image Stabilization function.
19. The camera shall feature a backlight compensation technology that can be
used to manually select an area of high brightness in the field of view and
adjust the gain in that area.
20. The network camera shall provide video transmission in an open format with
H.264, H.265 or MJPEG compression.
21. The camera shall support ONVIF profile S for operation with 3rd party
systems.
22. The camera shall be capable of simultaneously transmitting multiple video
streams of different resolution, compression, frame-rate and compression
settings.
23. The network camera should be configurable through a built in web server

SECURITY MANAGEMENT SYSTEM 16775-12

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 that can be accessed via standard browsers including Internet Explorer,
Firefox, Chrome & Safari.
24. The camera shall feature a line level audio input with an alarm function.
25. The camera shall feature a line level audio input and output capable of
duplex operation.
26. The cameras shall support micro SD, SDHC & SDXC flash memory card for
recording video footage on event, network loss or continuously.

B. Camera
1. Imaging Device 1/ 2.8” PS Exmor 3.2M CMOS
2. Total Pixels 2720(H) x 1536 (V)
3. Effective Pixels 2688(H) x 1520 (V)
4. Scanning System Progressive
5. Min. Illumination
a. Color 0.15 Lux (50IRE)
b. B/W 0.0 Lux (IR LED on)
6. S / N Ratio 50dB
7. H. Video Output CVBS: 1.0 Vp-p / 75Ω composite, 704x480(N), 704x576(P),
for installation - DIP connector type

C. Lens Type
1. Lens Type DC Auto Iris
2. Mount Type Board-in type
3. Focal Length (Zoom Ratio) 3~ 8.5mm (2.8X) Motorized Varifocal
4. Max. Aperture Ratio F1.2
5. Angular Field of View H : 100.12˚(Wide) ~ 35.38˚(Tele)
6. V : 73.76˚(Wide) ~ 26.58˚(Tele)
7. F. Min. Object Distance 0.5M
8. G. Focus Control Simple Focus (Motorized V/F) /
Manual -
Remote control via network (Manual,
Simple Focus, Day & Night)

D. Pan / Tilt / Rotate

1. Pan Range '0 ° ~ +355 °
2. Tilt Range '0 ° ~ +67 °
3. Rotate Range '0 ° ~ +355 °

E. Operation
1. Camera Title Off / On (Displayed up to 45
characters)
2. Day & Night Auto (ICR) / Color / B/W / External /
Schedule
3. Backlight Compensation Off, BLC, WDR
4. Wide Dynamic Range Off, / On (120dB)
5. Contrast Enhancement On, Off
6. Digital Noise Reduction On, Off

SECURITY MANAGEMENT SYSTEM 16775-13

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 7. Motion Detection Off / On (4ea 4 Points Polygonal
zones)
8. Privacy Masking Off / On (32ea Rectangular zones)
9. Sens-up (Frame Integration) Off, Auto (2x ~ 60x)
10. Gain Control Off / Low / Middle / High / Manual
11. White Balance ATW / AWC / Manual / Indoor /
Outdoor
12. Electronic Shutter Speed Auto / A.FLK / Manual (1/30 ~
1/12,000sec)
13. Flip / Mirror Off, On
14. Intelligent Video Analytics Tampering, Virtual Line, Enter/Exit,
Appear /
Disappear, Audio Detection, Face
Detection
15. Alarm I/O Input 1ea / Output 1ea
16. Alarm Triggers Motion detection,
Tampering, Audio
Detection, Face Detection, Video Analytics,
Alarm Input, Network Disconnection
1 Alarm Events File upload via FTP and E-Mail Notification
7
.
Via E-Mail, TCP and HTTP local
storage(SD/SDHC/SDXC) recording at
Network disconnected & Event
(Alarm
Triggers) External output
1 R. Defog Auto/Manual/Off
8
.
1 S. IR LED 12ea
9
.
2 T. Viewable Length 25m
0
.

F. Network Protocol
1. Ethernet RJ-45 (10/100Base-T)
2. Video Compression Format H.264 (MPEG-4 part 10/AVC), MJPEG
3. Resolution 2048x1536/1920x1080
/1600x1200/
1280x1024 /1280x960 /1280x720 /
1024x768
/ 800x600 / 800x450 / 640x480 /
640x360 / 320x240 / 320x180
4. Max. Framerate H264 Max 30fps @ 4Mpix and Max

SECURITY MANAGEMENT SYSTEM 16775-14

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 60fps at all resolutions
5. Video Quality Adjustment
a. H.264 Compression level, Target bit rate level
control
b. MJPEG Quality level control
6. Bitrate Control Method
a. H.264 CBR or VBR
b. MJPEG VBR
7. Streaming Capability Multiple Streaming (Up to 10 Profiles)
8. Audio I/O Mic (Line) in / Line out (1Vrms), Built-in Mic.
9. Audio Compression Format G.711 u-law /G.726 Selectable
G.726 (ADPCM) 8 KHz, G.711 8 KHz
G. 6: 16Kbps, 24Kbps, 32Kbps,
40Kbps
10. Audio Communication Bi-directional audio
11. IP IPv4, IPv6
12. Protocol TCP/IP, UDP/IP, RTP(UDP), RTP(TCP),
RTCP, RTSP, NTP, HTTP, HTTPS, SSL,
DHCP, PPPoE, FTP, SMTP, ICMP, IGMP,
SNMPv1/v2c/v3(MIB-2), ARP, DNS,
DDNS,
QoS, PIM-SM, UPnP, Bonjour
13. Security HTTPS (SSL) Login Authentication
Digest Login Authentication
IP Address Filtering User access Log
802.1x Authentication
14. Streaming Method Unicast, Multicast
15. Max. User Access 15 users at Unicast mode
16. Memory Slot SD/SDHC/SDXC
Motion Images recorded in the
SDX/SDHC/SD memory
card can be downloaded.
17. ONVIF Conformance Yes, Profile S

A. Electrical
1. Voltage DC12V±10%, PoE (IEEE802.3af)
2. Consumption Max. 8.5W

B. Environmental Specifications
1. Operating Temperature -10°C ~ +55°C (14°F ~ 131°F)
2. Operating Humidity Less than 90% RH

C. Certifications
1. CE mark
2. FCC mark
3. UL

SECURITY MANAGEMENT SYSTEM 16775-15

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
2.05 6 MEGAPIXEL FULL HD ELEVATOR NETWORK IR DOME CAMERA

A. The camera shall be of a dome type suitable for external installation. The camera
shall have an aluminum body and polycarbonate bubble.

B. The camera shall be IP66 and also IK10.

C. The camera shall have a sustained maximum temperature of 55C and absolute
maximum temperature of 65C

D. All other specifications shall be same as indoor dome 5MP IR camera.

2.06 8MEGAPIXEL FULL HD PEOPLE COUNT IR DOME CAMERA

A. The camera shall be of a dome type suitable for external installation. The camera
shall have an aluminum body and polycarbonate bubble.

B. The camera shall be IP66 and also IK10.

C. The camera shall have a sustained maximum temperature of 55C and absolute
maximum temperature of 65C

D. All other specifications shall be the same as indoor dome 6MP IR camera.

2.07 6 MEGAPIXEL FULL HD WEATHERPROOF NETWORK IR BULLET CAMERA

A. The camera shall be of a bullet type suitable for external installation. The camera shall
have an aluminum body and integrated wall bracket.

B. The camera shall feature an Adaptive Infrared illumination system with 20 LEDs giving a
viewable distance of 30m (98.43ft) in complete darkness.

C. The IR bullet camera shall be provided with a sun shield.

D. The camera be IP66 and IK10

E. The camera shall be equipped with a 4GB SD card for recording during network
disconnection. Upon reconnection, the data shall be automatically transferred to the
recording server as mentioned elsewhere in the specifications.

F. The camera shall have a sustained operating temperature of 55 degree C and absolute
maximum temperature of 65 degree C.

G. All other specifications shall be same as indoor/outdoor dome 6MP IR camera.

SECURITY MANAGEMENT SYSTEM 16775-16

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
2.08 4MP APNR CAMERA

A. Functional Description
1. The camera should be an all-in-one digital IP camera for traffic systems with
a built-in illuminator and integrated processing unit with Built-in CPU for
ANPR processing.
2. The camera should be capable to autonomously run license plate, container
code and DOT code recognitions or any other OCR-based application for
dedicated databases.
3. The camera’s built-in processing unit should be an industrial strength
computer with its own Linux operating system, which can be also replaced by
Windows OS as an option.
4. The device should contain an embedded server to allow access via common
web browsers. Among others, this IP connection permits for real-time image
manipulation, correction and enhancement tasks through the camera’s
digital signal processor (DSP).Lenses.
5. The camera should have LPR engine included which should be country-
independent.
6. The cameras should be capable of capturing high quality images, even of
vehicles traveling at speeds up to 120 km/h.
7. The camera should be flexible for hardware/software integration, with
possibility to upload custom applications to the camera.

2.09 4 MP 32x Outdoor PTZ Camera for External Areas:

1. These cameras shall support multi-streaming technologies, transferring real-time high-

resolution images. It shall support 60fps at all available resolution when using H.264.
2. The camera shall provide 4.4~140.8mm (32x) optical zoom with 16x digital zoom. It shall
support SD memory.
3. The camera shall be of a dome type suitable for external installation.
4. The camera shall feature a motorized pan and tilt mechanism capable of panning at 250°/s
and tilt movement at 250°/s under preset mode. Under manual mode it shall be possible to
move at maximum speed of 120°/s.
5. The camera shall be capable of capturing an image size of 1920x1080 at 30 images per
second.
6. The camera shall feature a day / night mode that incorporates an infrared cut filter
removal mechanism for true color reproduction and the best possible low light performance.
7. The camera shall feature a 32x zoom lens with continuous and one shot autofocus
functions.

SECURITY MANAGEMENT SYSTEM 16775-17

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 8. The camera shall feature Wide Dynamic Range with a gain of 120dB.
9. The camera shall be POE+ capable.
10. The camera shall feature two integrated IR LED’s. The IR shall function along with the
zoom and dynamically vary the IR intensity as per the zoom ratio. The IR shall cover up to
150mts.
i. Electrical Specifications:
A. Input Voltage 24V AC, POE+.
B. Power Consumption, max. Max. 30W (Heater Off) / 35W.
(Heater Off, IR on), 90W (Heater On, IR on).

ii.Camera:
A. Imaging Device 1/2.9” 2M CMOS Progressive Scan. Sensor.
B. Total Pixels (horizontal x vertical) 1952(H) x 1116(V).
C. Effective Pixels (horizontal x vertical) 1,944(H) x 1104(V).
D. Scanning System Progressive.
E. Min. Illumination
1. Color 0.3Lux (F1.6, 50IRE).
2. B/W 0Lux (IR LED on).
F. S / N ratio 50dB.
G. Video Output: CVBS:1.0 Vp-p.
1. NTSC 704x480, for installation.
2. PAL 704x576, for installation.
iii. Lens:
A. Zoom 32x (4.4 ~ 140.8 mm).
iv. Operational Specification:
A. Camera Title On, off (displays up to 15 characters).
B. Day and Night Auto (ICR), Color, B/W.
C. Backlight Compensation BLC, HLC, WDR, off.
D. Digital Noise Reduction Off, On.
E. Wide Dynamic Range 120dB.
F. Motion Detection On, off (1 programmable zones).
G. Privacy Masking On, off (32 rectangular zones).
H. Apply privacy mask with zoom ratio.
I. Gain Control Off, Low, Medium, High, Manual.
J. White Balance ATW/AWC/Manual/Indoor/Outdoor/ Mercury/Sodium.
K. Electronic Shutter Speed Minimum/Maximum/Anti-flicker. (2~1/12000 sec).
L. Flip/Mirror Off, On.
M. Intelligent Video Analytics Tampering, Virtual line, Enter / Exit,
Appear / Disappear. Face detection (5ea).
N. Alarm I/O Input 4ea / Output 3ea.
O. Auto Tracking Off/On.
P. Azimuth East/West/South/North OSD.
Q. Preset Accuracy +- 0.2.
R. Sequence Preset (255), Swing, Group (6), Trace, Tour, Auto Run, Schedule.
S. Tilt Range 190° (-5 ~ 185).
T. Pan Range 360° Endless.

SECURITY MANAGEMENT SYSTEM 16775-18

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
U. Remote Control Interface RS485/422.
V. RS-485 Protocol Samsung-T/E, Pelco D/P, Panasonic, Honeywell, AD Vicon, GE,
BOSCH.
W. Alarm Triggers Alarm input, Motion detection, Intelligent Video analytics,
Network. Disconnection.
X. Alarm Events -File Upload via FTP, E-Mail.
-Notification via E-Mail, TCP.

-Local storage (SD/SDHC). or NAS recording.

-External Output.
-PTZ Preset.
v. Environmental specifications:

A. Operating Temperature -50°C ~ +55°C (-58°F ~ +131°F). sustained maximum.

65C absolute maximum.
B. Operating Humidity Less than 100% RH.
11. The camera shall have minimum following specification as per MOI:
a. IP Day/Night, 2.0MP.
b. Resolution 2MP @ 25 FPS.
c. CMOS Progressive Scan Sensor.
d. Pan 360 continuous rotation.
e. H.264/MJPEG, configurable Dual Stream Encoder.
f. 2.0MP with 30X (4.3 to 129mm) Optical,10x Digital Zoom.
g. Low Light with IR Cut Filter and Wide Dynamic Range.
h. 10/100 Mbps Ethernet Compatible ; RJ-45 LAN Port.
i. Supports RTP/RTSP Unicast/Multicast.
j. Variable bit rate and Constant Bit rate.
k. OSD Display of Camera ID, PTZ Coordinates.
l. IR LEDs Distance; minimum 100m.
m. Bracket / Pole Concealed cable entry within the bracket I pole.
n. The camera shall comply with ONVIF.
o. For Outdoor camera: shall have Outdoor weather proof dome housing (IP 66) rating.

I. Lens:
The selection of lenses shall be in accordance with the FOV requirements of MOI Regulation.
Appropriate lenses shall be selected by the integrator to make sure proper coverage is
achieved as per Local police guidelines and shall consider actual site requirements. For
spectator area monitoring, 5-50 mm lens special lens shall be provisioned to comply MOI
requirements.

J. Camera Poles:
1. Poles shall be rustproof, weather resistant and hot dip galvanized Aluminum or Steel
construction.
2. Poles shall have a minimum of 3 m height and shall be capped at the top.
3. The cable entry shall be from footing and not externally visible. The pole shall have a
tamper resistant cover plate to allow internal inspection of the pole located within 1 m of
the base. All pole access cover plates shall be secured using screws.

SECURITY MANAGEMENT SYSTEM 16775-19

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
4. The pole shall support the camera and its accessories and shall withstand vibrations
and wind.
5. Poles/mounting structure and construction as per the project requirement in
accordance with the manufacturer recommendations. Poles design, color & finish shall be as
per Engineer’s approval

K. Camera-Supporting Equipment:
1. Mounting brackets for fixed cameras will be die cast aluminum with stainless steel
swivel assembly.
2. Heavy duty versions will be used for external cameras and medium duty versions for
internal cameras. Finish will be powder coat painted in color to be agreed with the Engineer.
3. Protective Housings for Fixed Cameras: Steel or aluminum enclosures with internal
camera mounting and connecting provisions that are matched to camera/lens combination
and mounting and installing arrangement of camera to be housed.
4. The aperture window shall be fitted with toughened glass.
5. Alignment Provisions: Camera mounting shall provide for field aiming of camera and
permit removal and reinstallation of camera lens without disturbing camera alignment.

6. Equipped with Built-in thermostat-activated heater and blower units. Units shall be
automatically controlled so the environmental limits of the camera equipment are not
exceeded.
7. The housing shall be fitted with a sun visor and a self-parking wiper. Sun shield shall
not interfere with normal airflow around the housing.
8. Mounting bracket and hardware for wall or ceiling mounting of the housing. Bracket
shall be of same material as the housing; mounting hardware shall be stainless steel
9. Finish: Housing and mounting bracket shall be factory finished using manufacturer's
standard finishing process suitable for the environment and IP66 rated.
10. The outdoor camera shall be installed within a POE+ weatherproof enclosure, which
shall include a blower and a heater.
11. The Mounting Bracket shall be corrosion resistant coating to prevent rust.
12. Camera mounts shall minimize vibrations of the camera. Plastic mounts will not be
accepted.
13. The mount head shall be adjustable so the camera can obtain optimum view
14. Camera housing shall be with accordance with the required applications and
schedule of equipment.
a. Internal Vandal-resistant housing - IP65 minimum.
b. Weatherproof Outdoor Housing - IP66 Minimum.
15. This weatherproof enclosure shall be minimum 16" camera housing that is designed
to guarantee that the outdoor VIDEO SURVEILLANCE camera is installed securely for stable
operation. It shall be firm and secure with the semi-permanent material, designed to be in
harmony with the surrounding environment and to help the VIDEO SURVEILLANCE camera
operate stably regardless of the dirt that may accumulate in the installation site and the
weather condition. In addition to weatherproof, it shall have the hinges on both sides that
are manufactured in the top cover structure. This shall facilitate the installation and repair
work. The material of the body frame shall be made of aluminum that is corrosion resistant.
The product shall also be seamlessly sealed to protect itself from an unexpected external
impact. The enclosure shall be provided with a cable channel bracket and all exposed

SECURITY MANAGEMENT SYSTEM 16775-20

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
cablings shall be avoided.

2.10 RECORDING SERVER SOFTWARE

A. General
1. The recording software shall support various video and audio formats
including H.264, H.265, MPEG-4, MJPEG, and G.711.
2. The recording software shall support recording of video resolutions as
provided by the camera.
3. The recording software shall have a performance of 400Mbps of recording
throughput, 512Mbps of streaming throughput and 100Mbps dedicated
bandwidth for playback/backup.
4. The recording software shall provide triplex operation: recording, live video
transfer and recorded video transfer. Search/playback of recorded video
shall also be provided.
5. The recording software shall support a maximum of 128~256 cameras per server
or within the recording bandwidth of the server.
6. It shall be possible to have a N+1 configuration, where it is possible to have one
hot stand-by recording server. The hot-stand by server shall automatically
take over the functions of the failed server. The recording solution shall provide
active- active failover between recording servers such as failure of any server
shall distribute the cameras among the balance available servers.
7. The recording software shall support video transfer of various recording
options such as continuous recording, event based recording (motion
detection, I/V detection, video loss, alarm signal input) and also scheduled
recording (including holiday setup).
8. The recording software shall provide event notification including user-
defined alert sound output, e-mail to pre-assigned receiver, and notification to
monitoring (CMS) software. An event log shall be generated to track events.
9. The recording software shall provide manual backup and schedule backup
to CD, DVD or external storage (USB and NAS).
10. The recording software shall provide multiple disk allocation and
distribution, multi-level user access and authority management, IP filtering
function for security access, automatic search of network cameras for
configuration, camera management (including IP change, configuration, and
firmware upgrade), and automatic self upgrade (with connection to Upgrade
Server).

B. Devices
1. Devices Network Cameras, Encoder
2. Registered Devices max. 64

C. Recording
1. Registered Channels max. 128~256
2. Recording Performance: up to 512Mbps of write throughput.
3. Video Codec MPEG-4, MJPEG, H.264, H.265

SECURITY MANAGEMENT SYSTEM 16775-21

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 4. Audio Codec G.726, G.711, G.723, PCM
5. Codec (Dual) Recording codec and
monitoring codec
selectable by each camera.
6. Resolution QXGA, UXGA, SXGA, HD, SVGA, 4CIF,
Half D1, VGA, CIF, QVGA
7. Quality 10 levels
8. Record Time
a. Pre 1 ~ 16CH 60sec, 17~ 32CH 30sec,
33 ~ 64CH 15s
b. Post 1200sec
9. Record Mode Continuous, Event (Pre/Post
alarm), and Scheduled

D. Storage
1. Configuration Storage space assigning by each
disk, Warning against lower disk
space

E. Back Up

1 Manual DVD/CD, USB HDD, USB flash memory

. a. Back up format AVI, Native format.
2 Schedule NAS (Network Attached Storage), USB HDD,
.
a. Back up format Native format

2.10 RECORDING

A. All Cameras shall be recorded at maximum resolution as per MOI and 15fps for
120 days. Consider 20% spare capacity in terms of storage as well as camera
channels for future expansion.

2.11 VIDEO MANAGEMENT SOFTWARE

A. General
1. The Video Manager software shall allow installation on a single PC or across
multiple PCs in a distributed configuration.
2. The software shall consist of five modules; System Manager, media
gateway, Workstation, Service Manager, Scheduled backup and recording
server.
3. The System Manager Software module shall manage all of the devices and
users of the system.
4. The System Manager module shall have the capacity to manage up to
800 events per second.

SECURITY MANAGEMENT SYSTEM 16775-22

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
5. The System Manager module shall log all events and actions within the
entire system.
6. The System Manager module shall manage all access to the system.
7. The System Manager shall use a SQL or equivalent database.
8. The media gateway software module shall act as a relay server for the
transmission of video, PTZ control and events.
9. The Media Gateway module shall be integrated along with the Recording
Server module.
10. The Media Gateway module shall be capable of handling up to 512bit/second
incoming and 512bit/second outgoing bandwidth.
11. Each Media Gateway module shall allow the connection of unlimited devices,
limited only by the bandwidth.
12. When the recording server is used along with the Media Gateway module it
shall allow the connection of up to 128~256 directly connected IP cameras or
encoders.
13. The Console software module shall act as the user interface for all
configuration and operation of the CCTV system.
14. The Console shall support up to four directly connected monitors with any
combination of multiple live / map views, a playback / backup monitor and
an event viewing monitor.
15. The Console live view shall support a popup instant playback window,
allowing fast access to recently recorded images.
16. The Console shall support up to 64 cameras on a single live view monitor.
17. The Console shall support up to 100 simultaneous live images across four
directly connected monitors, displaying up to 25 images per monitor.
18. The console shall support a series of layouts including but not limited to the
following 4:3 screen modes 1/4/6/8/9/10/13/16/17/21/25/36/49/64 and 16:9
screen modes 6/12/20/30.
19. The Console shall feature a sequence mode capable of displaying up to 16 way
split layouts.
20. The Console shall support H.264, H.265, MPEG-4 and MJPEG video
compression formats.
21. The Console shall support G.711 u-law (PCM), G.723, G.726 (ADPCM) audio
compression formats
22. The Console shall support bidirectional audio in either half or full duplex
modes.
23. The Console shall support a USB joystick with Pan, Tilt, Zoom, preset and next
/ previous camera features
24. The Console shall support a ‘drag to move’ proportional pan and tilt
function.
25. The Console shall support Area Zoom functionality allowing the operator to
click on a point in the image to command a fully functional camera to centre
on that area, as well as being able to draw a rectangle on the image to
command the camera to centre and zoom in to the defined area.
26. The Console shall support the control functions Go to 1x zoom, PTZ Sensitivity,
Focus, Zoom, Patrol, Swing/AutoOpen, Group/Scan, Trace/Pattern, Preset and

SECURITY MANAGEMENT SYSTEM 16775-23

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 Iris control.
27. The Console shall support split screen map / live view displays with cameras,
sensors & alarms being displayed on the map as icons. There shall also be a pop
up instant viewer accessible from the map camera icons.
28. The Console shall feature a Simple Record function that allows the instant
recording of a selected video tile for up to one hour.
29. The Console shall feature OSD On/Off, Snapshot / Print Image, Brightness
/Contrast control, Keep Aspect Ratio/Original size, Deinterlacing, Flip and
Digital zoom functions.
30. The Console Search mode shall support Date, Event, Smart Search, POS
Search based on DVR / NVR & Local folder playback.
31. The Console Search mode shall support Start/stop, Pause, Faster/Slower
forward/backward, Step Forward/Backward and Skip Forward /Backward
functions.
32. The Console shall be able to playback up to 16 cameras simultaneously.
33. The Console shall feature a Digital Zoom function that can be used on playback.
34. The Console shall feature a snapshot feature, allowing live or playback images to
be saved or printed quickly.
35. The Console shall feature a backup function allowing AVI or Native format files
to be downloaded to local storage.
36. The Console shall feature an Event Monitoring window that allows live
monitoring or searching of previous events.
37. The Console Event Monitoring window shall feature live or search filtering of
events by User, System, Camera, Sensor, Alarm Out, Video Loss, Motion,
Passing, Entering, Exiting, Disappearing /Appearing, Tampering, Scene Change,
Tracking, Face Detection and Audio Detection.
38. The Console Event Monitoring window shall feature a report generator that
shows events and statistics. It shall then be possible to print or save this data
in PDF, Word or Excel format.
39. The Console Event Monitoring window shall feature an instant display,
displaying the video event, event remarks and the event status. This function
shall work in live monitoring or event search mode.
40. It shall be possible to define various system actions on a device event such as
Instant Viewer pop up, Preset activation, Alarm out, Pop-up, Sound and E-mail
notification.
41. The Console Configuration shall allow Site, User group, User account
management and Permission management for viewer functions.
42. The Console Configuration shall allow Automatic device IP scanning, Viewing the
device settings via the device webpage, Exporting or importing devices
settings and updating the device firmware.
43. The Console Configuration shall allow the management of layouts. These layouts
can only be added, edited and deleted in the configuration mode.
44. The Console Configuration shall allow the setting of Multi Monitor defaults,
Split Screen, Sequences, switching to I-Frame on a configured number of
cameras being displayed and using low-resolution images on split screens
over a certain number of cameras.

SECURITY MANAGEMENT SYSTEM 16775-24

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 45. The Console Configuration shall allow the setting of OSD
46. display, Date & Time, Capture, Recording, Startup, Language, UI auto lock
and Log options.
47. The Console Configuration shall allow the backup and restoration of
SSM settings as well as the ability to restore settings to default values.
48. It shall be possible to download playback videos recorded on the SD
memory card from the console.
49. The software shall feature a NTP client and server function.
50. The software shall feature an automatic upgrade function downloading the
latest software update from the upgrade server.
51. Use only manufacturer recommended hardware and OS for VMS. Use of
minimum recommended configuration is not allowed. It is always
recommended to use equal or better than the specifications recommended by
the manufacturer.
52. A virtual Matrix module shall be provided to control the monitor wall.
53. It shall be possible to select any monitor and address any camera to this
monitor.
54. Critical cameras of the facility shall be watched continuously while noncritical
cameras shall be sequenced.
55. Sequencing is an important feature of the VMS. The console/workstation
shall be able to switch the entire pane/layout. Individual camera connection
for sequencing is not allowed.

2.12 SECURITY CONTROL ROOM

A. The monitor layout i the control room shall meet the operational and security
requirements of the client. The design shall be done based on the following
assumptions:
B. Cameras selected for critical shall be monitored continuously on a 5x5 layout.

C. Cameras for general areas shall be monitored on sequence in a 5x5 layout such that
each monitor is not assigned more than 100 cameras and the time between each page
is not more than 10 seconds. Thus, the operator shall be able to view the same camera
every 40 seconds.

D. Provide space for three operators with four monitors for each. These would be used
for live view, playback, image export as well as alarm monitor.

E. Video Wall LED displays:

1. Assume minimum 6nos. 55” LED displays for the video wall.
2. The Contractor shall provide free-standing desk affixed LCD/LED mounts
that shall allow the arrangement of LED displays
3. They should be arranged in an ergonomic manner with the following
characteristics:
4. The vertical and horizontal viewing angle shall not exceed 45-degrees from
the operator’s eyes.
5. Distance from the screens to the operator’s eyes shall not less than 82cm

SECURITY MANAGEMENT SYSTEM 16775-25

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 and shall not exceed 122cm.
6. LED shall be suitable for 24/7 operation

F. Color LCD Workstation Screen

1. Color flat screen monitor with display screen size as shown on drawings
2. Monitor shall have built-in speaker and DVI input port
3. LCD shall be suitable for 24/7 operation

G. Keyboard and Mouse

1. A 12 function-key keyboard and Mouse pointing device, preferably optical

H. Printers
1. High quality, high speed laser printers for hardcopy system printouts.
2. The printer shall be multi font, Color output.
3. It shall have a minimum operating speed of 200 characters / second or
higher
4. Printers shall be formatted to print on standard A3 and A4 paper.
5. Minimum of 300 dpi.
6. Refer to the system drawings for the location and quantity of the printers.

I. Rack/ Structured Cabling/ Backbone & horizontal cabling: Refer to related section.

J. Operator Consoles
1. The Contractor shall provide Operator consoles to be installed within the
Security Control Room. The Operator consoles shall be quasi-custom and will
include the following features:
2. Console Working Surfaces
a. The main writing surface and work surface.
b. The security console shall have two side work surfaces. This surface
shall be utilized for additional writing surface or storage.
3. Workstation (PC) Storage
a. The security console shall have storage trays/shelves for one
workstation PC
b. PC Storage shall be constructed on non-conducting material and shall
raise the PC off of the finished floor surface.
c. PC storage allow for adequate ventilation at front and back of the
workstation PC.
d. PC Storage shall allow for convenient access to the workstation PC for
service, loading of media, or connection of wiring/peripherals.
4. Keyboard Shelf
a. The Operator console shall be equipped with a keyboard/mouse shelf
to support a standard PC keyboard and mouse.
5. Power Management
a. The operator console shall have an integral power strip with at least
two power strips with each 10 spaced power outlets
6. Finishes
a. Finish shall be coordinated with the Owner and Architect for color,

SECURITY MANAGEMENT SYSTEM 16775-26

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 and wood grain type/stain.
7. Storage
a. The operator console shall have storage below the writing surface for
office supplies, binders, and other general storage requirements.
8. LCD Mounts
a. The Contractor shall provide free-standing desk affixed LCD mounts
that shall utilize VESA 100mm mounting to allow the arrangement of
LCD monitors.
9. Chair: Suitable chair shall be provided
10. The security console and all accessories/equipment shall be ordered through
a single manufacturer.

2.13 RECOMMENDED HARDWARE SPECIFICATIONS

A. All hardware proposed for System Manager, Recordings servers,

Workstations/Decoders units shall be in compliance to recommended configuration
from the manufacturer. In no condition, minimum recommended specifications shall
be used.

B. Subject to conformance from the manufacturer, the following could be proposed.

C. System Manager/Recording server.

Rack Mount Server - VMS/Recording server

Intel® Xeon® E5-2430 v2 2.50GHz, 15M

CPU Cache, 7.2GT/s QPI, Turbo, 6C, 80W,
Max Mem 1600MHz
64GB RDIMM, 1333 MHz, Low Volt, Dual
Memor
Rank, x4 Bandwidth
y
2 x 1TB SSD SATA Read Intensive MLC
HDD
3Gbps 2.5" Hot-plug HDD 3.5" CARR
RAID PERC H310 Integrated RAID Controller,
Control Mini Type
ler
DVI High end graphic card with DVI video out
DVD+/-RW, SATA, Internal for 4HD
ODD
Chassis
OS Windows Server 2019 or later
Power
Dual Hot Plug Power Supplies 350W
Supply

D. Workstations:

SECURITY MANAGEMENT SYSTEM 16775-27

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024
 Rack mount or mini tower.

Intel Core i7 Processor running at a

CPU
minimum of 2.7 GHz
Mem 64GB DDR4
ory
HDD 1TB Solid State Drive
High end graphic card with DVI video out.
DVI Two graphics cards shall be required to
support 4 LCD monitors
ODD 16X Half Height DVD-ROM Drive
Rack/ Rack mounted for the system and Tower
Towe type for the Operator
r
OS Windows 10 or later

E. SAN Storage:
1. Storage Units
a. The recording system should be a unified SAN with minimum RAIDS
6.
b. The SAN storage shall be offered with redundant controller
configuration.
c. The SAN shall be optimized for video surveillance.
d. The hard disks required for recording must be enterprise level one
with minimum 7200rpm.

F. Video Wall Controller

1. Input/ output slot
2. Input: BNC, SDI, YPbPr, HDMI, DVI, VGA, TVI, DP
3. Output: HDMI, DVI, VGA, SDI
4. Build-in matrix
5. Video wall control (maximum 32 large screen)
6. Division, splicing, base map, cross-window roaming

G. CCTV Keyboard
1. 10.1” touchscreen
2. Wifi connection
3. PoE powered
4. HDMI, DVI output
5. Liew view, display and transmission control, screen joint, cross-window
External video play

IP ACCESS CONTROL & INTRUSION SYSTEM

A. The security access system shall have the following:

SECURITY MANAGEMENT SYSTEM 16775-28

Project: KW.21.0667_Beyout Plus (M1) 31 October 2024