Motor Running & Motor Starting Lamp Power Factor

Capacitors

Contents

General information on Iskra Capacitors

Type KNM70xx 80xx 90xx KNM12xx 22xx 32xx KNM31xx

Construction of capacitors
metallized polypropylene film capacitor (Motor Running Capacitors)

Page
5

metallized polypropylene film capacitor (Motor Running Capacitors)

metallized polypropylene film capacitor (Motor Running Capacitors)

13

KNM31xx

metallized polypropylene film capacitor (Motor Starting Capacitors)

17

KNF50xx

metallized polypropylene film capacitor (Lamp Power Factor Capacitors)

21

KNF61xx

metallized polypropylene film capacitor (Lamp Power Factor Capacitors)

24

Motor Running & Motor Starting Capacitors KNM

Applications
Motor running capacitors type KNM are designed for obtaining an auxiliary phase in singlephase and in three-phase motors connected to a single phase. The capacitors provide a starting moment of 25 % to 30 % of rated moment. The approximate values of capacitors with the respect to motor power are given on the draft below.

Selection of capacitors values for different voltages and motor power

C (F) 60 50 40 30 20 10 220 V 240 V 280 V 300 V 320 V 360 V 380 V 400 V

450 V 480 V

0,5

1,5 Motor power (kW)

2,5

The connection and operation of single-phase motors with capacitor

Motor running capacitor The capacitor is connected for the entire time the motor is in operation.

Motor starting capacitor The capacitor is connected in series with the auxiliary motor winding only, it operates for short periods of time (3 s max.) and is automatically switched off using a centrifugal switch or electromagnetic relay as soon as the motor has built up speed.
Delta connection

Star connection

Connecting three-phase motors to a single-phase power supply

4

Motor Running Capacitors

Type KNM70xx Type KNM80xx Type KNM90xx TECHNICAL DATA
Rated voltage Un: Rated capacitance Cn: Capacitance tolerance: Rated frequency fn: Loss angle tan: Test voltage terminal to terminal: Test voltage terminal to case: Class of operation: Climate class: Temperature range: Compliance with standards: as per table as per table 10% ( 5% on request) 50 to 60 Hz max.10 10-4 at Un and 50 Hz 2 Un, 50 Hz, 2 s 2400 V, 50 Hz, 2 s as per table according to EN 60252-1 - 25 C to + 85 C EN 60252-1, UL 810 CSA C22.2 No. 190 Safety class P2

Design
Motor running capacitors type KNM70xx, KNM80xx and KNM90xx are made of metallized polypropylene film. The protection against climatic and mechanical influence is reached by using aluminium can and thermoplastic cover as a casing. The capacitors are impregnated with plant oil (non PCB) and protected with a mechanical disconnector. The leads are designed as soldering tags, two-wire cable lead and single or double fast-on tags.

Standard designs of capacitors type KNM70xx, KNM80xx and KNM90xx

With bolt Without bolt KNM7011, 8011, 9011 KNM7010, 8010, 9010 KNM7011, 8011, 9011 KNM7010, 8010, 9010 KNM7015, 8015, 9015 KNM7017, 8017, 9017 KNM7014, 8014, 9014 KNM7016, 8016, 9016

Soldering tags D =25mm to 55mm

Double Fast-on D=30mm to 55mm

Single Fast-on D=25mm to 55mm

Metal fixing bolt

Standard values and dimensions of capacitors type KNM70xx

Approvals Capacitance

P2
EN 60252-1 C22.2 No.190 Capacitance

Approvals

P2
EN 60252-1 C22.2 No.190

Voltage 400 VAC 50/60 Hz 240 VAC 50/60 Hz Climate class 10.000 h 25/85/21 10.000 AFC -25/+70 C Type KNM7010, KNM7011 KNM7016, KNM7017 KNM7014, KNM7015 (D >= 30 mm)

Voltage 400 VAC 50/60 Hz 240 VAC 50/60 Hz Climate class 10.000 h 25/85/21 10.000 AFC -25/+70 C Type KNM7010, KNM7011 KNM7016, KNM7017 KNM7014, KNM7015 (D >= 30 mm)

C (F) 1 1,5 2 2,5 3 3 3,5 4 4 4,5 5 5 6 6 7 7 7,5 8 8 8 9 9 10 10 11 12 12 12,5 13 13,5 14 14 15

D H (mm) 25 56 25 56 25 56 25 56 25 56 35 56 25 56 25 61 35 56 30 56 30 56 35 56 30 61 35 56 30 61 35 61 35 56 30 75 35 56 35 61 30 75 35 61 30 75 35 61 30 88 30 88 40 61 30 88 35 75 35 75 35 75 40 61 35 75

C (F) 16 18 20 22 25 30 35 40 45 50 55 60 65 65 70

D H (mm) 40 75 35 88 35 88 40 75 40 88 45 88 45 88 45 100 45 109 45 109 50 109 50 109 50 109 55 109 55 109

Standard values and dimensions of capacitors type KNM80xx

Approvals Capacitance

P2
EN 60252-1 C22.2 No.190 Capacitance

Approvals

P2
EN 60252-1 C22.2 No.190

Voltage 420 VAC 30.000 h 450 VAC 50/60 Hz Climate class 470 VAC 10.000 h 10.000 AFC 50/60 Hz 25/85/21 -25/+85 C Type KNM8010, KNM8011 KNM8016, KNM8017 KNM8014, KNM8015 (D >= 30 mm)

Voltage 420 VAC 30.000 h 450 VAC 50/60 Hz Climate class 470 VAC 10.000 h 10.000 AFC 50/60 Hz 25/85/21 -25/+85 C Type KNM8010, KNM8011 KNM8016, KNM8017 KNM8014, KNM8015 (D >= 30 mm)

C (F) 1,5 2 2,5 3 3 3,5 4 4 4,5 4,5 5 5 6 6 7 7 7,5 7,5 8 8,5 9 9 10 11 12 12,5 13 13,5 14 14

D H (mm) 25 56 25 56 25 56 25 61 30 56 30 56 25 75 30 56 25 75 30 61 25 75 30 61 30 75 35 61 30 75 35 61 30 75 35 61 30 75 35 75 30 88 35 75 35 75 35 75 35 75 35 88 35 88 35 88 35 88 40 75

C (F) 16 18 18 20 22 25 25 30

D H (mm) 40 75 35 100 40 88 40 88 40 88 40 100 45 88 45 100

Standard values and dimensions of capacitors type KNM90xx

Approvals Capacitance

P2
EN 60252-1 C22.2 No.190 Capacitance

Approvals

P2
EN 60252-1 C22.2 No.190

300 VAC 50/60 Hz Voltage 300 VAC 50/60 Hz 10.000 AFC Climate class 10.000 h 25/85/21 -25/+85 C Type KNM9010, KNM9011 KNM9016, KNM9017 KNM9014, KNM9015 (D >= 30 mm)

300 VAC 50/60 Hz Voltage 300 VAC 50/60 Hz 10.000 AFC Climate class 10.000 h 25/85/21 -25/+85 C Type KNM9010, KNM9011 KNM9016, KNM9017 KNM9014, KNM9015 (D >= 30 mm)

C (F) 1,5 2 2,5 3 3,15 3,5 4 4,5 5 6 6,5 7 7 8 8 9 9 10 10 12 12 12,5 13 13,5 13,5 14 15 16 16 18

D H (mm) 25 56 25 56 25 56 25 56 25 56 25 56 25 65 25 56 25 56 25 61 25 61 25 75 30 56 25 75 30 56 25 75 30 61 25 80 30 61 30 75 35 61 30 75 30 75 30 75 35 61 30 75 30 75 30 80 35 61 30 88

C (F) 22 24 25 30 30 35 40 40 45 45 50 50

D H (mm) 35 75 35 80 35 80 35 125 40 100 40 100 40 125 45 100 45 75 45 100 45 109 50 100

Motor Running Capacitors

Type KNM12xx Type KNM22xx Type KNM32xx TECHNICAL DATA
Rated voltage Un: Rated capacitance Cn: Capacitance tolerance: Rated frequency fn: Loss angle tan: Test voltage terminal to terminal: Class of operation: Climate class: Temperature range: Allowed pulse loading: Compliance with standards: as per table as per table 10% ( 5% on request) 50 Hz <10 10-4 at Un at 1 kHz 1V 2 Un, 50 Hz, 2 s as per table according to EN 60252-1 - 25 C to + 85 C < 1 F, 100 V/s; _ > 1 F, 50 V/s EN 60252-1, UL 810 CSA C22.2 No. 190 Safety class P0

Design
Motor running capacitors type KNM12xx, KNM22xx and KNM32xx are made of metalized polypropylene film. The protection against climatic and mechanical influences is reached by using prismatic plastic case sealed with epoxy resin. The case and the resin are selfextinguishing. Leads are designed as tinned copper wire or insulated copper wires. Note: Capacitors KNM12xx, KNM22xx and KNM32xx can be used also for other purposes, such as in industrial electronics in electronics circuits where capacitors are lower pulse loaded.

Standard designs of capacitors type KNM12xx, KNM22xx and KNM32xx

KNM1225, 1244, 2225, 2244, 3225, 3244 KNM1228, 2228, 3228

Standard values and dimensions of capacitors type KNM12xx

Approvals Voltage Climate class Capacitance C (F) 0,33 0,47 0,68 0,82 1 1,2 1,3 1,4 1,5 1,6 1,8 2 2 2,2 2,2 2,5 2,7 2,8 3 3 3,2 3,5 4 4,5 5 5 5,5 6 6,5 7 7,5 8 9 10 b h x l (mm) 7,5 x 16,5 x 26,5 9,0 x 18,5 x 26,5 11,0 x 20,5 x 26,5 11,0 x 20,0 x 32,0 11,0 x 20,0 x 32,0 11,0 x 20,0 x 32,0 14,0 x 20,0 x 32,0 14,0 x 20,0 x 32,0 14,0 x 20,0 x 32,0 13,0 x 22,0 x 32,0 15,0 x 24,5 x 32,0 15,0 x 24,5 x 32,0 14,0 x 25,0 x 38,5 15,0 x 24,5 x 32,0 14,0 x 25,0 x 38,5 14,0 x 25,0 x 38,5 14,0 x 25,0 x 38,5 14,0 x 25,0 x 38,5 14,0 x 25,0 x 38,5 14,0 x 25,0 x 41,5 16,0 x 27,0 x 41,5 16,0 x 27,0 x 41,5 16,0 x 27,0 x 41,5 18,0 x 31,0 x 41,5 18,0 x 31,0 x 41,5 24,0 x 26,5 x 41,5 24,0 x 26,5 x 41,5 24,0 x 26,5 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 r (mm) 22,5 22,5 22,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 35 27,5 35 35 35 35 35 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 275 VAC 50/60 Hz 10.000 h 25/85/21

P0
EN 60252-1 400 VAC 50/60 Hz 3.000 h 25/85/21 C22.2 No.190 400 VAC 50/60 Hz -25/+85C

10

Standard values and dimensions of capacitors type KNM22xx

Approvals Voltage Climate class Capacitance C (F) 0,33 0,33 0,39 0,47 0,56 0,62 0,68 0,75 0,82 1 1 1,2 1,5 1,8 2 2,2 2,5 2,6 2,7 3 3,5 4 4,5 5 b h x l (mm) 10,0 x 19,0 x 31,5 11,0 x 20,5 x 26,5 11,0 x 20,0 x 32,0 12,0 x 21,0 x 31,5 11,0 x 20,0 x 32,0 11,0 x 20,0 x 32,0 11,0 x 20,0 x 32,0 12,0 x 21,0 x 31,5 13,0 x 22,0 x 32,0 14,0 x 25,0 x 38,5 14,0 x 23,5 x 31,5 14,0 x 25,0 x 38,5 14,0 x 25,0 x 38,5 16,0 x 27,0 x 41,5 16,0 x 27,0 x 41,5 16,0 x 27,0 x 41,5 18,0 x 31,0 x 41,5 18,0 x 31,0 x 41,5 18,0 x 31,0 x 41,5 24,0 x 26,5 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 r (mm) 27,5 22,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 35 27,5 35 35 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5

P0
EN 60252-1 400 VAC 50/60 Hz 30.000 h 25/85/21 C22.2 No.190 400 VAC 50/60 Hz -25/+85C

11

Standard values and dimensions of capacitors type KNM32xx

Approvals Voltage Capacitance C (F) 0,33 0,33 0,39 0,47 0,50 0,56 0,62 0,68 0,75 0,82 1 1,2 1,5 1,8 2 2,2 2,5 2,6 2,7 3 3,5 4 4,5 4,5 5 5 5,5 5,5 6 6 6,3 7 8 Climate class b h x l (mm) 11,0 x 20,5 x 26,5 10,0 x 19,0 x 31,5 11,0 x 20,0 x 32,0 11,0 x 20,5 x 26,5 10,0 x 18,5 x 26,5 11,0 x 20,5 x 26,5 11,0 x 20,5 x 26,5 10,0 x 19,0 x 31,5 11,0 x 20,0 x 32,0 11,0 x 20,0 x 32,0 12,0 x 21,0 x 31,5 14,0 x 23,5 x 31,5 15,0 x 24,5 x 32,0 17,0 x 26,5 x 31,5 17,0 x 26,5 x 31,5 14,0 x 25,0 x 41,5 16,0 x 27,0 x 41,5 16,0 x 27,0 x 41,5 16,0 x 27,0 x 41,5 18,0 x 26,0 x 41,5 18,0 x 31,0 x 41,5 24,0 x 26,5 x 41,5 33,0 x 35,0 x 41,5 29,0 x 31,0 x 41,5 33,0 x 35,0 x 41,5 29,0 x 31,0 x 41,5 33,0 x 35,0 x 41,5 29,0 x 31,0 x 41,5 33,0 x 35,0 x 41,5 29,0 x 31,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 33,0 x 35,0 x 41,5 r (mm) 22,5 27,5 27,5 22,5 22,5 22,5 22,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5 37,5

P0
EN 60252-1 400 VAC 30.000 h 460 VAC 10.000 h 50/60Hz 40/85/56 C22.2 No.190 450 VAC 50/60 Hz -40/+85C

- Approved

12

Motor Running Capacitors

Type KNM31xx TECHNICAL DATA
Rated voltage Un: Rated capacitance Cn: Capacitance tolerance: Rated frequency fn: Loss angle tan: Test voltage terminal to terminal: Test voltage terminal to case: Class of operation: Climate class: Temperature range: Compliance with standards: as per table as per table 10% ( 5% on request) 50 to 60 Hz max.10 10-4 at Un and 50 Hz 2 Un, 50 Hz, 2 s 2400 V, 50 Hz, 2 s as per table according to EN 60252-1 - 25 C to + 85 C EN 60252-1, UL 810 CSA C22.2 No. 190 Safety class P0

Design
Motor running capacitors type KNM31xx are made of metallized polypropylene film. Case and cover are made with selfextinguishing plastic material, the capacitive element is sealed with polyurethanic or epoxy resin. Leads are designed as soldering tags, single or double fast-on tags, two-wire cable, stranded wire or solid wire.

Standard designs of capacitors type KNM31xx

With bolt Without bolt Fast Fix KNM3111 KNM3110 KNM3101 KNM3117 KNM3116 KNM 3107 KNM3115 KNM3114 KNM3105 KNM3138 KNM3137 KNM3108
2 9

KNM3126 KNM3125 KNM3106

2

KNM3147 KNM3144 KNM3104

2 9 150 1 0

45 5

295 1 0

D 0,5

0,5

0,5

Soldering tags

Single fast-on

Double fast-on

Two-wire cable 2x0,75 mm2

25 8,
R1,1 5

Standard wire 0,5 mm2

Solid wire 0,5 mm2

9,5

10,25

Metal fixing bolt

FAST FIX (D = 30 to 40 mm) Driling Plate thickness: 0.8 - 1.5 mm 13

2,3

150 1 0

Standard values and dimensions of capacitors type KNM31xx - motor running: 400 VAC 30.000 h
Approvals Voltage Capacitance C (F) 1 1,25 1,5 2 2,5 3 3,15 3,15 3,5 4 4,5 5 5,5 6 6 6,3 6,3 6,8 7 7 7,5 7,5 8 9 10 11 12 12,5 13 14 15 15 16 16 17 17,5 17,5 Climate class D x H (mm) 25 57 25 57 25 57 25 57 25 57 25 57 25 57 30 57 30 57 30 57 30 57 30 57 35 57 30 71 35 57 30 71 35 57 35 57 30 71 35 57 30 71 35 57 35 57 35 71 35 71 35 71 35 71 40 71 40 71 40 71 35 95 40 71 35 95 40 71 45 71 35 95 45 71

P0
EN 60252-1 400 VAC 50/60 Hz 30.000 h 25/85/21 450 VAC 50/60 Hz 10.000 h 25/85/21 C22.2 No.190 450 VAC 50/60 Hz -25/+85C Capacitance C (F) 18 18 20 20 22 25 30 31,5 35 36 40 45 50 55 60 65 70 75 80 90 100

Approvals Voltage Climate class D x H (mm) 40 95 45 71 40 95 45 71 40 95 40 95 45 95 45 95 45 120 45 120 45 120 45 120 50 120 50 120 55 120 55 120 55 120 60 120 60 120 65 120 65 120

P0
EN 60252-1 400 VAC 50/60 Hz 30.000 h 25/85/21 450 VAC 50/60 Hz 10.000 h 25/85/21 C22.2 No.190 450 VAC 50/60 Hz -25/+85C

- Approved

14

Standard values and dimensions of capacitors type KNM31xx - motor running: 400 VAC 10.000 h
Approvals Voltage Capacitance C (F) 0,5 1 1,5 2 2,5 3 3,15 3,5 4 4,5 5 5,5 6 6,3 6,8 7 7,5 7,5 8 8 8,5 9 9 10 10 11 Climate class D x H (mm) 25 57 25 57 25 57 25 57 25 57 25 57 25 57 25 57 30 57 30 57 30 57 30 57 30 57 30 57 30 57 30 57 30 71 35 57 30 71 35 57 30 71 30 71 35 57 30 71 35 57 30 71 400 VAC 50/60 Hz 10.000 h 25/85/21

P0
EN 60252-1 450 VAC 50/60 Hz 3.000 h 25/85/21 C22.2 No.190 450 VAC 50/60 Hz -25/+85C Capacitance C (F) 12 12,5 13 14 15 16 18 20 22 22 25 30 40

Approvals Voltage Climate class D x H (mm) 35 71 35 71 35 71 35 71 35 71 40 71 40 71 40 71 35 95 40 71 40 95 40 95 45 95 400 VAC 50/60 Hz 10.000 h 25/85/21

P0
EN 60252-1 450 VAC 50/60 Hz 3.000 h 25/85/21 C22.2 No.190 450 VAC 50/60 Hz -25/+85C

- Approved

15

Standard values and dimensions of capacitors type KNM31xx - motor running: 250 VAC 10.000 h
Approvals Capacitance Voltage Climate class C (F) 1 1,5 2 2,5 3 3,2 3,5 4 4,5 5 6 6,3 7 7,5 8 9 10 11 12 12,5 13 13,5 14 15 16 17,5 18 20 22 25 30 40 50 D x H (mm) 25 57 25 57 25 57 25 57 25 57 25 57 25 57 25 57 25 57 25 57 25 57 30 57 30 57 30 57 30 57 30 57 30 57 35 57 35 57 35 57 35 57 35 57 35 57 35 57 35 71 35 71 35 71 35 71 35 71 40 71 40 71 40 95 45 95

P0
EN 60252-1 250 VAC 50/60 Hz 10.000 h 25/85/21 C22.2 No.190 250 VAC 50/60 Hz -25/+85C

- Approved

16

Motor Starting Capacitors

Type KNM31xx TECHNICAL DATA
Rated voltage Un: Capacitance (Cmin - Cmax): Rated frequency fn: Test voltage terminal to terminal: Test voltage terminal to case: Temperature range: Duty cycle: 280 VAC as per table 40 to 60 Hz 1,3 Un, 50 Hz, 2 s 2400 V, 50 Hz, 2 s - 25 C to + 70 C 3/1.7 % Hours applications N = 20 Application time t = 3 s N t = 60 Safety class P0

Design
Motor starting capacitors type KNM31xx are made of metallized polypropylene film. Case is made of self-extinguishing plastic material, the capacitive element is sealed with polyurethanic or epoxy resin. Leads are designed as twowire cable.

Standard designs of capacitors type KNM31xx

With bolt Without bolt KNM3138 KNM3137

Standard values and dimensions of capacitors type KNM31xx - motor starting

Capacitance

Cmin - Cmax (F) 50 - 63 63 - 80 80 - 100 100 - 125 108 - 132 125 - 156

D x H (mm) 45 95 45 120 45 120 50 120 55 120 55 120 60 120

295 1 0

45 5

156 - 200

D 0,5

Two-wire cable 2 x 0.75 mm2

17

Type designation data:

A1

A2

A3

A4

A5

A6

A7

K Dielectric Application Manufacture Case material and finish Design

A1 A2 A3 A4

K N M 1, 2, 3 5, 7, 8 0

Capacitor Dielectric metallized polypropylene film Motor running in casing sealed with epoxy or polyurethanic resin in casing impregnanted, closed with plastic cover, mechanical disconetor incorporated aluminium, cylindrical plastic, cylindrical plastic, prismatic soldering tags 3.0x0.8 mm,FAST FIX solid wire with insulation, FAST FIX double fast-on terminals 6.3 0.8 mm as per DIN 46244,FAST FIX stranded wire with insulation, FAST FIX single fast-on terminals 6.3 0.8 mm as per DIN 46244,FAST FIX two wire insulated cable lead, FAST FIX soldering tags 3.0 0.8 mm soldering tags 3.0 0.8 mm, fixing bolt plastic cap, two-wire insulated cable lead plastic cap, two-wire insulated cable lead, fixing bolt double fast-on terminals 6.3 0.8 mm as per DIN 46244 double fast-on terminals 6.3 0.8 mm as per DIN 46244, fixing bolt single fast-on terminals 6.3 0.8 mm as per DIN 46244 single fast-on terminals 6.3 0.8 mm as per DIN 46244, fixing bolt stranded wire with insulation stranded wire with insulation, fixing bolt

A5

1 2 01 04 05 06 07 08 10

A6 A7

11 12 13 14 15 16 17 25 26

18

28 37

tinned copper wire leads of 0.8 mm diameter and 3.5 to 25 mm length two wire insulated cable lead two wire insulated cable lead, fixing bolt 44 - solid wire with insulation 47 - solid wire with insulation, fixing bolt 51 - aluminium cap, two wire insulated cable lead, fixing bolt

A6 A7

38 44 47 51

Details according to DIN EN 60252-1

Class of operation: The minimum total life for which the capacitor has been designed at rated duty, voltage, temperature and frequency. Class A 30.000 hours Class B 10.000 hours Class C 3.000 hours Class D 1.000 hours Climate class: The first number represents the lower limit, the second one represents the higher limit, the third one represents the number of days necessary to the humidity test (example:25/85/21). Safety class: (P2) Indicates that the capacitor type has been desingned to fail in the open-circut mode only and is protected against fire or shock hazard. (P1) Indicates that the capacitor type may fail in the open-circut mode or short-circuit mode and is protected against fire or shock hazard. (P0) Indicates that the capacitor type has no specific failure protection. CAUTION: In case of overload, they may burst or catch fire.

DEGREE OF PROTECTION (IP)

According to IEC publication 529
1st code letter 0 1 2 3 4 5 6 Degree of protection Short description Non-protected Protected against solid objects greater than 50mm Protected against solid objects greater than 12mm Protected against solid objects greater than 2.5 mm Protected against solid objects greater than 1.0 mm Dust-protected TotaI dust-protected 2nd code letter 0 1 2 3 4 5 6 Degree of protection Short description Non-protected Protected against dripping water Protected against dripping water when tilted up to 15 Protected against spraying water Protected against splashing water Protected against water jets Protected against water jets

- Second number: + 85 C highest allowed ambient temperature

to expand. One terminal, which is also weakened, cannot withstand the expansion and consequently breaks resulting in an interruption of the electrical circuit.

Disconnector incorporated

Discharging resistor incorporated

Self-healing capacitor version

Other Markings
Temperature range: - First number: - 25 C lowest allowed ambient temperature

Operating of the Mechanical Disconnector

After many breakdowns, the pressure inside the capacitor case begins to enlarge and the weaker (intended) areas of the case begin
19

Instructions for Ordering

When the buyer intends to order Iskra capacitors, the following data are needed: - type designation of the capacitor - rated voltage and rated frequency - rated capacitance and capacitance tolerance - class of operation - quantity of capacitors and required lead time - climate class Example: The motor running, impregnated, cylindrical capacitor with mechanical disconnector, faston tags and fixing screw, for the climate class 25/85/21 and class of operation of 10000 hours, for the rated voltage 470 V 50/60 Hz, rated capacitance 10 F 10 %, is written as it is shown below: KNM8017 10 F 10 % 470 VAC 50/60 Hz 10.000 h 25/85/21.

Production Program
Capacitors for use in electronics: - polyester film capacitors, metallized and nonmetallized - polypropylene film capacitors, metallized and nonmetallized Capacitors and filters for radio interference suppression Motor running & motor starting capacitors Power factor correction capacitors for lamps Power factor capacitors and automatic power factor banks Electronic regulators for power factor banks Tools and production equipment and machinery

20

Lamp Power Factor Capacitors KNF

Type KNF50xx
Safety device

Applications
The capacitors type KNF are used for improvement the power factor on fluorescent, mercury, metalhallogen and sodium lamps. With the proper choice of the capacitor in accordance with the power and lamp type the right power factor correction can be obtained.

Design
TECHNICAL DATA
Rated voltage Un: Rated capacitance Cn: Capacitance tolerance: Rated frequency fn: Loss angle tan: Test voltage terminal to terminal: Test voltage terminal to case: Climate class: Temperature range: 250 VAC, 450 VAC see tables 4 %, 5 %, 10 % 50 to 60 Hz max.10 10-4 at Un and 50 Hz 2 Un, 50 Hz, 2 s 2500 V, 50 Hz, 2 s see tables - 25 C to + 85 C - 40 C to + 100 C, - 40 C to + 85 C EN 61048, EN 61049 The KNF capacitors are made of metallized polypropylene film. The mechanical and climatic protection is provided by aluminium can and thermoplastic washer (type KNF50xx) or plastic can (type KNF61xx). The type KNF50xx is also protected with the mechanical disconnector. The metallized version provides selfhealing properties. This design assures long life and reliable operation. The terminals are on the top of the capacitors in the form of soldering tags which can be used for soldering the contact wires or as the contact terminals for the screwless connector. The following types of capacitors are available: - with the incorporated discharging resistor - with the fixing bolt on the bottom of the capacitor - QUICK-FIT fixing lugs - with the screwless connector

Compliance with standards:

The Iskra capacitors type KNF do not contain any PCB or PCN

21

Standard designs of capacitorstype KNF50xx

KNF5010, KNF5030
11 1
7 1

KNF5011, KNF5031
11 1

KNF5018

KNF5019

15 1

7 1

H 3

H 3

H 3

12

D 0,5

D 0,5
M8 M8

D 0,5

D 0,5

Metal fixing bolt

22

12

H 3

15 1

Standard values and dimensions of capacitors type KNF50xx, 250 VAC and 450 VAC
Voltage Capacitance Climate class 250 VAC 50/60 Hz 40/100/21 Capacitance Voltage Climate class 450 VAC 50 Hz 25/085/21

KNF5018, KNF5019 KNF5010, KNF5030 KNF5011, KNF5031 D x H (mm) 25 61 25 61 25 61 25 61 25 61 25 88 25 61 30 61 25 88 25 88 25 88 30 61 25 88 30 88 30 88 30 88 30 88 35 76 30 88 35 88 35 88 35 88 35 88 35 88 35 88 40 88 35 110 35 110 40 88 45 88 40 110

KNF5018, KNF5019 KNF5010, KNF5030 KNF5011, KNF5031 D x H (mm) 25 61 25 88 25 88 25 88 25 88 25 61 25 88 25 88 25 88 25 88 30 61 25 88 25 88 30 61 25 88 25 88 25 88 25 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 30 88 35 88 35 88 35 88 35 88 35 88 35 88

C (F) 2 2,5 3 3,5 4 4,5 4,5 4,5 5 6 7 7 8 8 9 10 12 12 13,5 13,5 14 15 16 18 20 20 20 21 25 30 30

C (F) 2 2 2,4 2,5 2,7 2,7 2,8 2,9 3 3,2 3,2 3,3 3,4 3,4 3,5 3,6 3,7 4 4,4 4,6 5 5,1 5,2 5,3 5,4 5,5 5,7 5,9 6 6,3 6,8 7,2 7,8 8,4 8,7 9 10

23

Type KNF61xx
KNF6119

Plastic case
KNF6152 KNF6153 KNF6154

Metal fixing bolt

Mounting holes

Standard values and dimensions of capacitors type KNF61xx

Voltage Capacitance Climate class 250 VAC 50/60 Hz 40/85/21 Capacitance Voltage Climate class 250 VAC 50/60 Hz 40/85/21 Capacitance Voltage Climate class 250 VAC 50/60 Hz 40/85/21

KNF6119, KNF6152 KNF6153, KNF6154 C (F) 2 2,5 3 3,15 3,5 4 4,2 4,5 5 5,5 6 6,3 D x H (mm) 25 55 25 55 25 55 25 55 25 55 25 55 25 55 25 68 25 68 25 68 25 68 25 68 C (F) 6,5 6,8 7 7,2 7,5 8 8,4 9 10 11 12 12,5

KNF6119, KNF6152 KNF6153, KNF6154 D x H (mm) 25 68 30 68 30 68 30 68 30 68 30 68 30 68 30 68 30 68 35 68 35 68 35 68 C (F) 13 13,5 13,5 14 14 15 15 16 16 18 20 22

KNF6119, KNF6152 KNF6153, KNF6154 D x H (mm) 35 68 35 68 30 92 35 68 30 92 35 68 30 92 35 68 30 92 35 92 35 92 35 92

24

Type designation data:

A1

A2

A3

A4

A5

A6

A7

K Dielectric Application Manufacture Case material and finish Design

A1 A2 A3 A4

K N F 5 6 0 1 10 11 18

capacitor Dielectric metallized polypropylene film power factor correction on lamps impregnated, closed with plastic washer, mechanical disconnector incorporated closed with plastic washer, dry construction aluminium, cylindrical plastic, cylindrical soldering tags 3.0 0.8 mm soldering tags 3.0 0.8 mm, fixing bolt screwless connector screwless connector, fixing bolt soldering tags 3 x 0.8 mm, discharging resistor soldering tags 3 x 0.8 mm, discharging resistor, fixing bolt screwless connector, QUICK-FIT fixing lugs solid wire with insulation, fixing bolt, discharging resistor solid wire with insulation, QUICK-FIT fixing lugs, discharging resistor

A5

A6 A7

19 30 31 52 53 54

25

Operating of the Mechanical Disconnector

After many breakdowns, the pressure inside the capacitor case begins to enlarge and the weaker (intended) areas of the case begin to expand. One internal terminal which is also weakened, cannot withstand the expansion and consequently breaks resulting in an interruption of the electrical circuit.

Other Markings
Temperature range: - first number: - 25 C, - 40 C = the lowest allowed ambient temperature - second number: + 85 C, + 100 C = the highest allowed ambient temperature

Production programme
Capacitors for use in electronics - polyester film capacitors, metallized and nonmetallized - polypropylene film capacitors, metallized and nonmetallized Capacitors and filters for radio interference suppression Spark suppression capacitors for motor cars

Disconnector incorporated

Motor running & motor starting capacitors Power factor capacitors for lamps Power factor capacitors and automatic power factor banks Electronic regulators for power factor banks Capacitors for inductive heating Tools and production equipment and machinery

Discharging resistor incorporated

Self-healing capacitor version

Instructions for ordering

When ordering the following data are needed: - the type designation of the capacitor - the rated voltage and rated frequency - the rated capacitance and capacitance tolerance - the climate class - the quantity and the required lead time

26

Concept, design & production: Poanta, d.o.o. [email protected] 27

W7

A
Maribor
Jesenice

Slovenia
I
Ljubljana

Celje

CRO
Novo mesto

Koper

Semi
Crnomelj

Metlika

Iskra Kondenzatorji, d.d. Vajdova ulica 71 SI-8333 Semi, Slovenia Phone: +386 7 38 49 200 +386 7 38 49 275 - Sales Department Fax: +386 7 30 67 110, 30 67 609 E-mail: [email protected] http://www.iskra-capacitors.com