Scribd
Upload
209 views1 page

Analog and Digital Electronics Syllabus UPDATED

Uploaded by

AS GAMING
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
209 views1 page

Analog and Digital Electronics Syllabus UPDATED

Uploaded by

AS GAMING
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Course Code: ESC302 Course Name: Analog and Digital Electronic Circuits

Course Credit: 3 Total Contact Hour: 40hr

Course Contents:

Unit 1: Diode circuits

P-N junction diode, I-V characteristics of a diode; review of half-wave and full-wave rectifiers,
Zener diodes, clamping and clipping circuits.

Unit 2: BJT circuits

Structure and I-V characteristics of a BJT; BJT as a switch. BJT as an amplifier: small-signal
model, biasing circuits, current mirror; common-emitter, common-base and common- collector
amplifiers; Small signal equivalent circuits, high-frequency equivalent circuits

Unit 3: Introduction of Digital System and Binary Numbers

Number System and its arithmetic, signed binary numbers, compliments, Binary codes, Cyclic
codes, Hamming Code, Simplification of Boolean Expression: K-map method up to five
variables, SOP and POS Simplification Don’t Care Conditions NAND and NOR Gate

Unit 4: Combinational Digital Circuits

Analysis Procedure, Design Procedure, Code Converter, Binary Adder- Subtractor, Decimal
Adder, Binary Multiplier, Magnitude Comparator, Decoders, Encoders, Multiplexers,
Demultiplexers.

Unit 5: Sequential circuits and systems

Latches & Flip Flops, Characteristic Equations of Flip Flops, Excitation Table of Flip Flops, Flip
Flop Conversion, Registers, Shift Registers, Synchronous and Asynchronous Counters, , Other
Counters: Johnson &Ring Counter Analysis of clocked Sequential Circuits with State Machine
Designing, State Reduction and Assignments, Design Procedure, Hazards.

You might also like