【PSDB Series】

Shielded SMD Power Inductor

220

F D

J I

E H

EPOXY

■Dimensions Unit: mm
A B C
Type D E F H I J
Max. Max. Max.
PSDB5D28 6.2 6.3 3.0 4.7 2.0 0.6 2.6 1.0 4.6
PSDB1003 10.3 10.4 3.1 7.7 3.0 1.2 3.2 1.6 7.3
PSDB1004 10.3 10.4 4.0 7.7 3.0 1.2 3.2 1.6 7.3
PSDB1005 10.3 10.4 5.0 7.7 3.0 1.2 3.2 1.6 7.3

■Features ■Inductance and rated current ranges

－Directly connected electrode on ferrite core －PSDB5D28 2.5～100µH 2.60～0.40A
－High power, High saturation inductors －PSDB1003 2.2～470µH 5.60～0.48A
－Ideal inductors for DC/DC converters －PSDB1004 0.56～1000µH 10.0～0.32A
－With magnetically shielded against radiation －PSDB1005 1.5～1000µH 10.5～0.35A
－Available on tape and reel for automatic －Test equipment:
surface mounting. L: HP4284A LCR meter
DCR: Milli-ohm meter

■Applications －Electrical specifications at 25°C

－Power Supply for VTRs

－LCD Televisions ■Characteristics
－Notebook PCs －Rated DC current: The current when the inductance becomes 35% lower than its
－Portable Communication initial value or the actual current when the temperature of coil increases to ∆T=40°C.
－DC/DC Converters, etc. The smaller one is defined as Rated DC Current. (Ta=25°C)
－Operating temperature range: -40～125°C

■Product Identification

PSDB 5D28 N T 101

Product Type Dimensions Inductor Packaging Inductance

(AxBxC) Tolerance Style
5D28: 6.2×6.3×3.0 N: ±30% T: Tape and Reel 1R0: 1.0µH
1003: 10.3×10.4×3.1 470: 47µH
1004: 10.3×10.4×4.0 101: 100µH
1005: 10.3×10.4×5.0

www.viking.com.tw For detail questions, contact : [email protected] Edition : REV.A9

1 Revision: 25-Jul-2016
【PSDB Series】
Shielded SMD Power Inductor
■Electrical Characteristics
PSDB5D28 / 1003 / 1004 / 1005 Type

DCR IDC
L Test (mΩ) max. (A) max.
Codes Tolerance
(µH) Condition
5D28 1003 1004 1005 5D28 1003 1004 1005
R56 0.56 N 100KHz, 0.1V - 20 8 - - 6.20 10.0 -
1R0 1.0 N 100KHz, 0.1V 15.0 20 8 - 2.90 6.20 10.0 -
1R2 1.2 N 100KHz, 0.1V - 20 8 - - 6.20 10.0 -
1R3 1.3 N 100KHz, 0.1V - 20 8 - - 6.20 10.0 -
1R5 1.5 N 100KHz, 0.1V 16.0 20 8 6 2.80 6.20 10.0 10.5
1R8 1.8 N 100KHz, 0.1V 23 10 5.60 9.5
2R2 2.2 N 100KHz, 0.1V 17.0 23 11 7 2.70 5.60 8.00 9.25
2R5 2.5 N 100KHz, 0.1V 17.6 23 12 - 2.60 5.60 7.50 -
2R7 2.7 N 100KHz, 0.1V 23 12 5.60 7.50
3R3 3.3 N 100KHz, 0.1V 20.3 29 13 10 2.30 5.00 6.50 7.80
3R8 3.8 N 100KHz, 0.1V - 29 17 - - 5.00 6.00 -
4R0 4.0 N 100KHz, 0.1V 27.0 33 - - 2.10 4.80 - -
4R7 4.7 N 100KHz, 0.1V 29.0 35 21 12 2.00 4.83 5.70 6.40
5R0 5.0 N 100KHz, 0.1V 31.1 35 22 - 1.85 4.83 5.60 -
5R2 5.2 N 100KHz, 0.1V - 43 22 - - 4.83 5.50 -
5R6 5.6 N 100KHz, 0.1V - - 25 - - - 5.20 -
6R0 6.0 N 100KHz, 0.1V 41.9 - - - 1.70 - - -
6R8 6.8 N 100KHz, 0.1V - - 26 18 - - 4.90 5.40
7R0 7.0 N 100KHz, 0.1V - - 27 - - - 4.80 -
8R0 8.0 N 100KHz, 0.1V 49.9 - - - 1.50 - - -
8R2 8.2 N 100KHz, 0.1V - 50 33 20 - 3.54 4.60 4.85
100 10 N 100KHz, 0.1V 54.0 58 35 26 1.30 2.70 4.40 3.45
120 12 N 100KHz, 0.1V 71.6 72 46 33 1.20 2.25 3.92 3.40
150 15 N 100KHz, 0.1V 82.4 86 50 41 1.10 2.22 3.60 2.83
180 18 N 100KHz, 0.1V 101.5 116 70 46 1.05 1.90 3.00 2.62
220 22 N 100KHz, 0.1V 119.0 145 73 61 0.95 1.78 2.90 2.44
270 27 N 100KHz, 0.1V 146.0 176 83 69 0.85 1.63 2.80 2.24
330 33 N 100KHz, 0.1V 182.5 213 93 84 0.76 1.46 2.30 1.88
390 39 N 100KHz, 0.1V 209.5 270 120 106 0.68 1.32 2.20 1.70
470 47 N 100KHz, 0.1V 229.5 299 128 130 0.60 1.18 2.10 1.56
560 56 N 100KHz, 0.1V 305.0 335 171 149 0.55 1.10 1.80 1.39
680 68 N 100KHz, 0.1V 351.0 451 213 201 0.48 1.04 1.50 1.36
820 82 N 100KHz, 0.1V 418.5 513 250 227 0.45 0.94 1.40 1.20
101 100 N 100KHz, 0.1V 520.0 700 304 253 0.40 0.84 1.35 1.09
121 120 N 100KHz, 0.1V - 765 400 303 - 0.76 1.20 1.00
151 150 N 100KHz, 0.1V - 876 506 370 - 0.70 1.15 0.91
181 180 N 100KHz, 0.1V - 1000 631 419 - 0.60 1.03 0.84
221 220 N 100KHz, 0.1V - 1050 756 500 - 0.58 0.92 0.75
271 270 N 100KHz, 0.1V - 1500 853 672 - 0.56 0.84 0.68
331 330 N 100KHz, 0.1V - 1800 1090 812 - 0.52 0.70 0.60
391 390 N 100KHz, 0.1V - 2000 1450 953 - 0.50 0.62 0.57
471 470 N 100KHz, 0.1V - 2170 1520 1289 - 0.48 0.54 0.50
561 560 N 100KHz, 0.1V - 2750 2500 1430 - 0.35 0.50 0.47
681 680 N 100KHz, 0.1V - 3200 2800 1599 - 0.29 0.45 0.43
821 820 N 100KHz, 0.1V - 3800 3000 1768 - 0.28 0.40 0.39
102 1000 N 100KHz, 0.1V - 5000 3250 1989 - 0.23 0.32 0.35

www.viking.com.tw For detail questions, contact : [email protected] Edition : REV.A9

2 Revision: 25-Jul-2016
【PSDB Series】
Shielded SMD Power Inductor
▓Tape and Reel specifications

INDUCTORS

Unit:mm

Tape size Parts Per Reel

Type
W P 13〞
PSDB5D28 12 8 2000
PSDB1003 24 16 1000
PSDB1004 24 16 750
PSDB1005 24 16 750

www.viking.com.tw For detail questions, contact : [email protected] Edition : REV.A9

3 Revision: 25-Jul-2016
【PSDB Series】
Shielded SMD Power Inductor
■SMD Power Inductor Environmental Specifications
General

Items Specifications

Temperature range: 15~28℃; Humidity: <80% relative humidity.

Shelf Storage conditions
Recommended product should be used within one year from the time of delivery.

Environmental test

Test Items Specifications Test Conditions / Test Methods

Temperature 85±2℃ ,
High temperature Storage test Time: 48±2 hours,
Tested after 1hour at room temperature.
Low temperature Storage test Temperature -40±2℃,
No case deformation or change in Time: 48±2 hours,
appearance. Tested after 1hour at room temperature.
△L/L≦ 10% Temperature 40±2℃ , 90~95% relative humidity
Humidity test Time: 96±2 hours
Tested after 1hour at room temperature.
First -25℃ 30minutes then 25℃ 10 minutes last 85℃
Thermal shock test 30 minutes, as 1 cycle. Go through 5 cycles.
Tested after 1 hour at room temperature.

Mechanical test

Test Items Specifications Test Conditions / Test Methods

Product with Lead-free terminal:

Terminal area must have 90% minimum
Solderability test Dip pads in flux then dip in solder pot at 245±5℃ for 3
solder coverage.
seconds.
Flux should cover the whole of the sample before
Resistance to Soldering No case deformation or change in heating, then be preheated for about 2 minutes over
Heat appearance. temperature of 130~150℃. Immersing to 260±5℃ for
10 seconds.
Apply frequency 10~55Hz. 1.5mm amplitude in each of
Vibration test
No case deformation or change in perpendicular direction for 2 hours.
appearance. Drop down with 981m/s2(100G) shock attitude upon a
Shock resistance △ L/L≦ 10% rubber block method shock testing machine, for 1 time.
In each of three orientations.

The condition of reflow (recommendation):

www.viking.com.tw For detail questions, contact : [email protected] Edition : REV.A9

4 Revision: 25-Jul-2016