Act - 01 17 - en CS 1000C
Act - 01 17 - en CS 1000C
CALIBRATION LABORATORY
CS-1000C
Mini size 1G media converter USB powered
Description:
The CS-1000C series are small size Gigabit Ethernet - fiber converters designed to be media
interfaces between 10/100/1000Base-T Ethernet copper pairs cable and 1000Base-X fiber optics cable.
They feature a RJ-45 connector, and a pair of fiber optic connectors. The Gigabit Fiber Converters give
you the freedom to extend your 10/100/1000 Mbps cabling distance by allowing connectivity 2
kilometers for multimode optical fiber and 20 kilometers using single mode optical fiber.
LED indicators signal the power status of the converter, the Ethernet port and the FX port activity. The
power supply of converters is ensured via USB Micro-B port.
Features:
1000BASE-X Fiber to 10/100/1000BASE-X UTP Converter
Single mode and multimode application
Power supply: USB Micro-B
LED signalization
Pass through mode or Store and forward mode
Jumbo frame 9K support
Auto-Cross over for MDI/MDIX in TP port
Auto-Negotiation or Manual mode in TP port
Support Link Fault Pass Through (LFP) Function
CS-1000C-S31-20-USB
Specification:
IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T
Standards
802.3z 1000Base-X
Packet length Jumbo frame 9K support
Mode Store and Forward Switch Mode 1
Multimode: 50/125, 62.5/125 µm
Fiber Cable
Single mode: 9/125 µm
Fiber Connector Duplex SC
UTP Connector RJ-45
LED Display PWR, 1000, 100, TPL, FXL, TPX
Dimensions 45 x 57 x 22 mm
Weight 100 g
DC Power Input Connector USB 2.0, USB Micro-B
Output of AC/DC Power Adaptor 0.5 A @ 5 V DC
1
Set by switch
ACT_01-17_EN
27/02/2017
is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, [email protected]
1
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
100-120 V AC / 210-230 V AC
Input of AC/DC Power Adaptor
The plug type shall be specified in customer’s PO.
More than 50 000 hours, in accordance with the standard of telecom
MTBF
operation
Temperature Operation 0 to +50 ºС
Temperature Storage -40 to +85 ºС
Humidity 5 to 95% not condensing
RoHS compliant
Ordering Code:
CS-1000C-S31-20-USB 1G converter single mode 1310 nm, 20 km distance
CS-1000C-M30-02-USB 1G converter multimode 1300 nm, 2 km distance 2
2
Depends on cable type
ACT_01-17_EN
27/02/2017
is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, [email protected]