Optilink Op Xont 71110 Ac G Ont Router

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

OP-XONT 71110AC Datasheet

OP-XONT 71110AC
2GE+1POTS+WiFi

1.1 Product Description:


2GE+1POT WiFi GPON/EPON HGU terminal devices are designed for fulfilling FTTH and triple
play service demand of fixed network operators. These boxes are based on the mature Chipset
(Realtek) technology, which have high ratio of performance to price, and the technology of
IEEE802.11b/g/n/ac WiFi, Layer 2/3, and high quality VoIP as well. Support full management of HGU
devices through OLT. They are highly reliable and easy to maintain, with guaranteed QoS for different
service. And they are fully compliant with technical regulations such as IEEE802.3ah, ITU-T G.984.x
and technical requirement of GPON Equipment.

Figure 1: 2GE+1POTS+WiFi

1.2 Product categories:


Product model Product specification User Interface
OP-XONT 71110AC 1*EPON/GPON 2*GE+1*POTS+WiFi
Table 1 Product categories

Copyright © 2019 Optilink Networks Pvt. Ltd., All Rights Reserved. Page 1 of 5
OP-XONT 71110AC Datasheet

1.3 Special Features:

• Support full management of HGU functions

• Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc

• Integrated OAM/OMCI remote configuration and maintenance function

• Support rich QinQ VLAN functions and IGMP Snooping multicast features

• Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset

• Support 802.11n/ac WiFi(4T4R) function

• Support NAT, Firewall function

• Support IPv4 and IPv6 dual stack

• Support SIP protocol

1.4 Product Appearance Features

Copyright © 2019 Optilink Networks Pvt. Ltd., All Rights Reserved. Page 2 of 5
OP-XONT 71110AC Datasheet

1.5 Technical Parameters

Technical item 2GE+1POTS WiFi


PON interface 1 G/EPON port(EPON PX20+ and GPON Class B+)
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
Wavelength Tx1310nm,Rx 1490nm
Optical interface SC/UPC connector
LAN interface 2 x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45
connector
POTS interface (option) 1 x RJ11 connectors
Support: G.711A/G.711U/G.723/G.729 codec
Support: T.30/T.38/G.711 Fax mode, DTMF Relay
WiFi interface Compliant with IEEE802.11b/g/n/ac
2.4GHz Operating frequency: 2.400-2.483GHz
5.0GHz Operating frequency: 5.150-5.825GHz
Support MIMO, 4T4R,5dBi external antenna, rate up to 1.167Gbps

Support: multiple SSID


TX power: 11n--22dBm/11ac--24dBm
LED 9, For Status of POWER、LOS、PON、WAN、 LAN1、LAN2、2.4G、5G、
PHONE(option)
Operating condition Temperature: 0℃~+50℃
Humidity: 10%~90%(non-condensing)
Storing condition Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing)
Power adapter DC 12V/1.5A or DC 12V/1.0A
Power supply ≤10W
Dimension 178mm×120mm×30m(L×W×H)
Net weight 0.32Kg

Table 2 Technical parameters

Copyright © 2019 Optilink Networks Pvt. Ltd., All Rights Reserved. Page 3 of 5
OP-XONT 71110AC Datasheet

1.6 Panel lights:


LED ON Blink OFF
PWR The device is powered up — The device is powered down
Green is registered to the Green is registering to Green is not registered to the
PON
PON system the PON system PON system
Device does not receive Device have received optical
LOS —
optical signals signals
Route WAN connect to Router WAN do not connect to
WAN —
internet. internet.
WiFi turn on and with
Device is power off or WiFi
WiFi(2.4/5.0G) WiFi turned on ongoing data
turned off
transmission
Device has registered to
Phone hooks off or the
PHONE the soft-switch, but Device is power off or not
port is with ongoing
(option) without ongoing data registered to the soft-switch
data transmission
transmission
Port connection exception or
Port is sending or/and not connected NA User is
LAN1~LAN2 Port is connected properly
receiving data accessing User is logged in User
has no access

Table 3 Panel lightson

1.7 Software Function:

Management Mode:
• OAM/OMCI, Telnet, Web, TR09
• Support full management of HGU functions

Data Service Function:


• Full speed non-blocking switching
• 2K MAC address table
• 64 full range VLAN ID
• Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc
• Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
• Support auto polarity detection of Ethernet ports (AUTO MDIX)
• Integrated IEEE802.1p QoS with four level priority queues
• Support IGMP v1/v2/v3 snooping/proxy and MLD v1/v2 snooping/proxy
• Support bridge, router and bridge/router mixed mode

Copyright © 2019 Optilink Networks Pvt. Ltd., All Rights Reserved. Page 4 of 5
OP-XONT 71110AC Datasheet

WiFi Service Functions:


• Integrated 802.11b/g/n/ac
• Support max 128 users
• Authentication : WEP/WAP-PSK(TKIP)/WAP2-PSK(AES)
• Modulation type: DSSS、CCK and OFDM
• Encoding scheme: BPSK、QPSK、16QAM and 64QAM

Pot Service Functions (Option):


• Call protocol: SIP(IMS compatible) seamless compatible with all popular call agent
• Integrate heartbeat function and support active/standby call agent
• Voice coding: ITU-T G.711/G.722/G.729, auto-negotiate with call agent
• Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length
• Support high/low speed fax, bypass fax, and T38 fax
• Support high speed MODEM(56Kbps) dial access
• Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, call forward, call
waiting, hot-line call, alarm clock, and all kinds of value-added voice service
• Multi-party conferencing
• IP address assignment: dynamic PPPoE/DHCP Client and static IP
• Support WEB, CLI, IVR, TR069
• Call loss less than 0.01%

1.8 Application Diagram :

Copyright © 2019 Optilink Networks Pvt. Ltd., All Rights Reserved. Page 5 of 5

You might also like