Ladder Diagram Exercise
Ladder Diagram Exercise
1. Switching on/off the Lamp whether they are at the bottom or the top of the staircase.
Create its equivalent ladder diagram.
Insert your LD here:
2. Controlling the running state of the 1 hp motor by pressing START and STOP
pushbuttons i.e. motor should remain in ON state after START pushbutton is
pressed and should OFF when STOP pushbutton is pressed. Checking if the Motor
is running normally by pressing TEST pushbutton.
Insert your LD here:
hp
Description:
3. The production line may be powered off accidentally or turned off for noon break. The
program is to control the counter to retain the counted number and resume counting after
the power is turned ON again. When the daily production reaches 500, the target
completed indicator will be ON to remind the operator for keeping a record. Press the Clear
button to clear the history records. The counter will start counting from 0 again.
Insert your LD here: Description:
4. Enabling the indicator to be ON after a 3 sec delay when switch pressed and OFF
immediately by the switch
5. Automatically infusing the container with liquids A and B in order when START is pressed.
When it reaches the set level, mix the two liquids evenly then open the valve to let out the
mixture.