MATERIALS:

(short sleeve) 2 (3, 3, 3, 4) (4, 5, 5, 6) skeins Sewrella Yarn Classic DK

(long sleeve) 4 (4, 4, 5, 5) (6, 7, 7, 8) skeins Sewrella Yarn Classic DK
(light/DK weight 3; 231yds/212m per skein)

GAUGE:

20 sts + 27 rows = 4”/10cm in stockinette

FINISHED DIMENSIONS:

Suggested negative ease: 0-2”/0-5cm

Pictured in size S on model with 34”/86.5cm bust (short sleeve) and size M on model with
38”/96.5cm bust (long sleeve)

ABBREVIATIONS:
*All Two of Wands patterns are written in standard US terms

CO – cast on Pm – place marker

Dec – decrease Rep – repeat
Inc – increase R – right
K – knit RS – right side
K2tog – knit 2 together Sl – slip
K2tog tbl – knit 2 together through the Sm – slip marker
back loop SSK – slip, slip, knit
L – left St(s) – stitch(es)
M1l – make 1 left WS – wrong side
M1r – make 1 right
P – purl

View fullsize

Notes: Top is worked from the top down with raglan shaping. The yoke and body are
worked flat and sleeves are worked in the round after body is complete. The sleeves are
finished with an i-cord bind off, the front panels and back neck are finished with an
applied i-cord worked from the wrong side to prevent curling, and the bottom i-cord tie is
first worked half way, then applied to the live bottom edge of the body, then continued on
for the other half of the tie. Pattern is written in eight sizes: XS (S, M, L, XL) (2XL, 3XL, 4XL,
5XL).

Yoke:

Using circular needles, CO 52 (54, 56, 58, 60) (62, 64, 66, 68) sts.

Set up row: P 1, pm, P 10, pm, P 30 (32, 34, 36, 38) (40, 42, 44, 46), pm, P 10, pm, P 1.

Row 1 (RS): (Body and sleeve inc row) K 1, m1r, sm, K 1, m1l, *K to 1 st before next
marker, m1r, K 1, sm, K 1, m1l, rep from * one more time, K to 1 st before final marker,
m1r, K 1, sm, m1l, K 1. [60 (62, 64, 66, 68) (70, 72, 74, 76) sts]

Row 2 and all following even rows until otherwise stated: P, slipping all markers.

Row 3: K 1, m1r, K 1, sm, K 1, m1l, *K to 1 st before next marker, m1r, K 1, sm, K 1, m1l,
rep from * to last st, K 1. [68 (70, 72, 74, 76) (78, 80, 82, 84) sts]

Row 5: (K 1, m1r) twice, K 1, sm, K 1, m1l, *K to 1 st before next marker, m1r, K 1, sm, K 1,
m1l, rep from * to last 2 sts, K 1, m1l, K 1. [78 (80, 82, 84, 86) (88, 90, 92, 94) sts]

The yoke will continue to increase at different rates for sleeves, body, and neck. Use the
inc row guide below and the following instructions for your size to complete it.

———————————————————————————————————————-

Body inc row: *K to 1 st before next marker, m1r, K 1, sm, K to next marker, sm, K 1, m1l,
rep from * one more time, K to end of row. (4 sts inc)

Sleeve inc row: *K to next marker, sm, K 1, m1l, K to 1 st before next marker, m1r, K 1,
sm, rep from from * one more time, K to end of row. (4 sts inc)

Body and sleeve inc row: *K to 1 st before next marker, m1r, K 1, sm, K 1, m1l, rep from *
twice more, K to 1 st before final marker, m1r, K 1, sm, K 1, m1l, K to end of row. (8 sts inc)
Body and neck inc row: K 1, m1r, *K to 1 st before next marker, m1r, K 1, sm, K to next
marker, sm, K 1, m1l, rep from * one more time, K to last st, m1l, K 1. (6 sts inc)

Body, sleeve, and neck inc row: K 1, m1r, *K to 1 st before next marker, m1r, K 1, sm, K 1,
m1l, rep from * twice more, K to 1 st before final marker, m1r, K 1, sm, K 1, m1l, K to last
st, m1l, K 1. (10 sts inc)

———————————————————————————————————————-

Row 7: Body and sleeve inc row. [86 (88, 90, 92, 94) (96, 98, 100, 102) sts]

Row 9: Body and sleeve inc row. [94 (96, 98, 100, 102) (104, 106, 108, 110) sts]

Row 11: Body, sleeve, and neck inc row. [104 (106, 108, 110, 112) (114, 116, 118, 120)
sts]

View fullsize

Size M only:

Rows 13-36: Rep rows 7-12, four more times. (212 sts)

Row 37: Body and sleeve inc row. (220 sts)

Row 39: Body, sleeve, and neck inc row. (230 sts)

Row 41: Body inc row. (234 sts)

Row 43: Body, sleeve, and neck inc row. (244 sts)

Rows 45-48: Rep rows 41-44, one more time. (258 sts)

All sizes:

After yoke shaping is complete, there should be 62 (72, 82, 88, 94) (100, 106, 112, 118)
back sts, 46 (50, 54, 56, 56) (58, 58, 60, 60) sts per sleeve, and 25 (29, 34, 36, 39) (41,
44, 47, 49) sts per front.

Divide for Body and Sleeves:

Note: Row numbers will now restart for simplicity.

Row 1 (RS): K to marker, remove marker, place next 46 (50, 54, 56, 56) (58, 58, 60, 60) sts
on a holder or scrap yarn for left sleeve, remove next marker, CO 8 (8, 8, 12, 16) (20, 24,
28, 32) sts for left underarm, K to next marker, remove marker, place next 46 (50, 54, 56,
56) (58, 58, 60, 60) sts on a holder or scrap yarn for right sleeve, remove next marker, CO
8 (8, 8, 12, 16) (20, 24, 28, 32) sts for right underarm, K to end of row. [128 (146, 166,
184, 204) (222, 242, 262, 280) sts on needles]

Row 2 and all following even rows until otherwise stated: P.

Row 3: (Neck inc row) K 1, m1r, K to last st, m1l, K 1. [130 (148, 168, 186, 206) (224, 244,
264, 282) sts]

Row 5: K.

Size M only:

Rows 7-18: Rep rows 3-6, three more times. (174 sts)
Rows 19-48: Rep rows 3 and 4, fifteen more times. (204 sts) 10
Row 49: CO 2, K to end of row. (206 sts)

Row 50: CO 2, P to end of row. (208 sts)

Rows 51-56: Rep rows 49 and 50, three more times. (220 sts)

Row 57: CO 3, K to end of row. (223 sts)

Row 58: CO 3, P to end of row. (226 sts)

All sizes:

Separate for Side Slit:

Next row (RS - L): CO 2 (2, 3, 3, 3) (3, 3, 3, 3), K 124 (144, 161, 181, 201) (221, 241, 260,
275) (including new sts), turn leaving remaining 52 (62, 68, 78, 88) (98, 108, 117, 122) sts
unworked. [124 (144, 161, 181, 201) (221, 241, 260, 275) sts]

Next row (L): P.

Next row (L): CO 2 (2, 3, 3, 3) (3, 3, 3, 3), K to end of shortened row. [126 (146, 164, 184,
204) (224, 244, 263, 278) sts]

Rep last 2 rows one more time. [128 (148, 167, 187, 207) (227, 247, 266, 281) sts]

Break yarn and rejoin at other side of side slit.

Next row (RS – R): K. [52 (62, 68, 78, 88) (98, 108, 117, 122) sts]

Next row (R): CO 2 (2, 3, 3, 3) (3, 3, 3, 3), P to end of shortened row. [54 (64, 71, 81, 91)
(101, 111, 120, 125) sts]

Next row (R): K.

Rep last 2 rows one more time. [56 (66, 74, 84, 94) (104, 114, 123, 128) sts]

Rejoin to Close Side Slit:

Next row: CO 2 (2, 3, 3, 3) (3, 3, 3, 3), P across entire row, joining the two pieces again.
[186 (216, 244, 274, 304) (334, 364, 392, 412) sts]

Next row: CO 3, K to end of row. [189 (219, 247, 277, 307) (337, 367, 395, 415) sts]

Next row: CO 3, P to end of row. [192 (222, 250, 280, 310) (340, 370, 398, 418) sts]

Rep last 2 rows three more times. [210 (240, 268, 298, 328) (358, 388, 416, 436) sts]

Do not bind off. Break yarn and set work aside, with stitches still on circular needles.

View fullsize

I-cord Tie and Bottom Edging:

Using double pointed needles, CO 4 sts.

Slide sts to other end of needle, and without turning, K across the row. The working yarn
will be pulled up the back of the work since it is now at the bottom of the sts.
Slide sts to the other end of the needle, and again without turning, K across the row. By
doing this you are forming a tube called an i-cord. Continue on in this manner until the i-
cord measures 36”/91cm (40”/102cm, 44”/112cm, 48”/122cm, 52”/132cm, 56”/142cm,
60”/152cm, 64”/163cm).

Begin working attached i-cord along bottom edge of body as follows:

Slide sts to other end of needle. Bring the yarn around the back and K 3 sts. Sl the last st
purlwise with yarn in back.

With the RS of the body facing up, insert the needle containing the i-cord sts into the first
st on the circular needles, and K it. Pass the slipped st over the picked up st.

Slide the 4 sts to the other end of the needle. K 3 sts and sl the last st purlwise with yarn
in back. Pick up the next st on the circular needles by inserting the double pointed needle
into the st and knitting it, then pass the slipped st over it.

Continue this process until all of the sts on the first st holder/scrap yarn have been picked
up.
Now you will continue with the unattached i-cord to create the second tie. After you have
passed the slipped st over the last picked up st from the circular needles, slide the 4 sts to
the other end of the needle. K all of the sts, slide to the other end of the needle, K the sts,
slide to the other end, and continue this process until the unattached i-cord measures
36”/91cm (40”/102cm, 44”/112cm, 48”/ 122cm, 52”/132cm, 56”/142cm, 60”/152cm,
64”/163cm).

Short Sleeves:

Place sts from one sleeve holder onto double pointed needles and rejoin yarn.

CO 8 (8, 8, 12, 16) (20, 24, 28, 32) sts at underarm and pm for beginning of round. [54
(58, 62, 68, 72) (78, 82, 88, 92) sts]

Next 6 rnds: K.

Work an i-cord bind off as follows:

CO 4 sts at beginning of next rnd.

*K 3, K2tog tbl, sl sts from right hand needle back to left hand needle purlwise, rep from *
to end of round, bind off last 4 sts normally.

Use tails to sew ends of i-cord bind-offs together. Rep all steps for other sleeve.

Sew underarm cast-ons together to close holes.

Front Attached I-cord Edging:

Using double pointed needles, CO 4 sts. K 3 sts, then sl the last st purlwise with yarn in
back. With WS of body facing and starting at the point where the bottom left front panel
attached i-cord begins, insert needle containing the sts into the first edge st along the
front edge and K into it. Pass the slipped st over the picked up st.

Slide the 4 sts to the other end of the needle. K 3 sts and sl the last st purlwise with yarn
in back. Pick up the edge st from the following row by inserting the double pointed needle
into the st and knitting it, then pass the slipped st over it.
Continue this process, working into the edge st of every row, up to the first raglan shaping
line, then work into each of the CO sts from this front left raglan line, top of left sleeve,
back left raglan line, back neck, back right raglan line, top of right sleeve, and front right
raglan line, then work into the edge st of every row of right front panel edge all the way
down to the point where the bottom right front panel attached i-cord begins.

Bind off and use tails to sew front i-cord edging to point where bottom attached i-cord
meets the i-cord ties.

Secure and weave in all ends.

Dear Lilly, I hope you are well.

I checked, and the more straightforward thing is to send your payment via Payme to the
school. IMPORTANT: When making The Payme, please add “Beam Project week” to the
message box.

The school Will send to BEAM all the money collect after the trip.