DCY9316

Dryer
User Manual
DCY 9316 W
DCB 93166 W
DCB 93166 B
DCB 93166 R
EN
2960311143_EN/040316.1214
Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product. We hope that your product which has been
manufactured with high quality and technology will give you the best results. We advise you
to read through this manual and the other accompanying documentation carefully before
using your product and keep it for future reference. If you transfer the product to someone
else, give its manual as well. Pay attention to all details and warnings specified in the user
manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Explanation of symbols
Throughout this user manual the following symbols are used:
C
Important information or useful
hints about usage.
A
Warning for hazardous situations
with regard to life and property.
B Warning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the

product are manufactured from
recyclable materials in accordance
with our National Environment
Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard
them to the dedicated collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
TABLE OF CONTENTS
1 Important safety and 6 Operating th product 19
environmental instructions 6.1 Control panel......................................... 19
1.1 General safety.........................................4 6.2 Screen symbols................................... 19
1.1.1 Electrical safety................................5 6.3 Preparing the machine..................... 20
1.1.2 Product safety..................................6 6.4 Programme selection....................... 20
1.2 Mounting over a washing machine.8 6.5 Main Programmes ............................. 20
1.3 Intended use............................................9 6.6 Extra Programmes ............................ 20
1.4 Child safety...............................................9 6.7 Programme selection and
1.5 Compliance with the WEEE regulation consumption table..................................... 22
and disposing of the waste product.. 10 6.8 Auxiliary function............................... 23
1.6 Compliance with RoHS Directive:.10 6.9 Warning symbols................................ 23
1.7 Package information......................... 10 6.10 End duration....................................... 23
1.8 Technical specifications................... 11 6.11 Starting the Programme...............24
6.12 Child lock..............................................24
2 Your Dryer 6.13 Changing the Programme after it
2.1 Overview..................................................12 has started....................................................24
2.2 Package contents................................13 6.14 Cancelling the Programme...........24
6.15 Programme end................................ 25
3 Installation 14
7 Maintenance and cleaning 26
3.1 Appropriate installation location. 14
3.2 Removing the transportation safety 7.1 Cleaning lint filter / Loading door
assembly........................................................ 14 inner surface................................................ 26
3.3 Under counter installation............. 14 7.2 Cleaning the sensor .......................... 26
3.4 Adjusting the feet...............................15 7.3 Draining the water tank................... 27
3.5 Electrical connection..........................15 7.4 Cleaning the condenser .................. 27
3.6 Transportation of the machine.....15
8 Troubleshooting 29
3.7 Changing the illumination lamp ....15
4 Electrical Connection 16
4.1 Attention!............................................... 16
4.2 Electrical requirements................... 16
4.3 Fitting a different plug..................... 16
4.4 Washer/dryer combination............ 16
5 Preparations 17
5.1 Laundry suitable for drying in the
dryer.................................................................17
5.2 Laundry not suitable for drying in the
dryer.................................................................17
5.3 Preparing laundry for drying...........17
5.4 Things to be done for energy
saving...............................................................17
5.5 Correct load capacity......................... 18
1 Important safety and environmental
instructions
This section contains safety instructions that will help
protect from risk of personal injury or property damage.
Failure to follow these instructions shall void any warranty.
1.1 General safety
• The dryer can be used by children at and above 8
years old and by persons whose physical, sensory or
mental capabilities were not fully developed or who
lack experience and knowledge provided that they are
supervised or trained on the safe usage of the product
and the risks it brings out. Children should not play with
the product. Cleaning and maintenance works should not
be performed by children unless they are supervised by
someone.
• Children of less than 3 years should be kept away unless
continously supervised.
• Adjustable feet should not be removed. (See 2.1
Overview) The gap between the dryer and the floor
should not be reduced with materials such as carpet, wood
and tape. This will cause problems with the dryer.
• Always have the installation and repairing procedures
carried out by the Authorised Service. Manufacturer
shall not be held liable for damages that may arise from
procedures carried out by unauthorised persons.
• Never wash the dryer by spraying or pouring water onto it!
There is the risk of electric shock!
4 / EN Dryer / User Manual

Important safety and environmental instructions
1.1.1 Electrical safety
A Electrical safety instructions should be followed

while electrical connection is made during the
installation.
• Connect the dryer to a grounded outlet protected by a
fuse at the value specified on the type label. (See 2.1
Overview) Have the grounding installation performed by
a qualified electrician. Our company shall not be liable for
any damages that will arise when the dryer is used without
grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the
type label plate. (See 2.1 Overview)
• The voltage specified on the type label must be equal to
your mains voltage. (See 2.1 Overview)
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation,
maintenance, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by
pulling on the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to
connect the dryer to power supply in order to decrease the
risk of fire and electric shock.
• Power cable plug must be easily accessible after
installation.
B Damaged mains cable should be changed by an

Authorised Service agent.
B If the dryer is faulty, it must not be operated unless

it is repaired by an authorised service agent! There is
the risk of electric shock!
Dryer / User Manual 5 / EN

1.1.2 Product safety
• Superheating of the clothes inside of the dryer can

occur if you cancel the programme or in the event
of a power failure whilst the dryer is running, this
concentration of heat can cause self-combustion
and fire so always activate the ventilation
programme to cool down or quickly remove all
laundry from the dryer in order to hang them up
and dissipate the heat.
Points to be taken into consideration for fire

hazard:
Below specified laundry or items must not be dried
in the dryer because of fire hazard.
• Unwashed laundry items
• Items soiled with oil, acetone, alcohol, fuel oil,
kerosene, stain removers, turpentine, paraffin or
solvents must be washed in hot water with plenty
of detergent before being dried in the dryer.

Below specified laundry or items must not be
dried in the dryer due to the fire hazard:
• Garments or pillows bolstered with rubber foam
(latex foam), shower caps, water resistant textiles,
materials with rubber reinforcement and rubber
foam pads.
• Clothing cleaned with industrial chemicals.
Items such as lighters, matches, coins, metal parts,
needle etc. may damage the drum set or may lead
to functional problems. Therefore check pockets off
the laundry that you will load into your dryer.
Never stop your dryer before the programme
completes. If you must do this, remove all laundry
quickly and lay them out to dissipate the heat.
Clothes that are washed inadequately may ignite on

their own and even may ignite after drying ends.
• You must provide enough ventilation in order to prevent
gases exiting from devices operating with other types of
fuels including the naked flame from accumulating in the
room due to the back fire effect.

Clothing that contains metal reinforcements should
A not be dried
in the dryer. Dryer may be damaged if metal
reinforcements come loose and break off during
drying.
Use softeners and similar products in accordance
C with the instructions of their manufacturers.
Always clean the lint filter before or after each
C loading. Never operate the dryer without the lint
filter installed.
• Never attempt to repair the dryer by yourself. Do not
perform any repair or replacement procedures on the
product even if you know or have the ability to perform
the required procedure unless it is clearly suggested in the
operating instructions or the published service manual.
Otherwise, you will be putting your life and others’ lives in
danger.
• There must not be a lockable, sliding or hinged door that
may block the opening of the loading door in the place
where your dryer is to be installed.
• Install your dryer in a suitable place that is dry, well
ventilated and unlikely to get below 5 degrees Centigrade.
• Make sure that pets do not enter the dryer. Check the
inside of the dryer before operating it.
• Do not lean on the loading door of your dryer when it is
open, otherwise it may fall over.
• The lint must not be allowed to accumulate around the
tumble dryer.

1.2 Mounting over a washing machine
• A fixing device should be used between the two machines
when installing the dryer above a washing machine. The
fitting device can be obtained through spare part suppliers.
• Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other
reaches to approx. 180 kilograms. Place the products on a
solid floor that has sufficient load carrying capacity!
Washing machine cannot be placed on the dryer.
A Pay attention to the above warnings during the
installation on your washing machine.
Installation Table for Washing Machine and Dryer

Dryer Washing Machine Depth
Depth 62 cm 60 cm 54 cm 50 cm 49 cm 45 cm 40 cm
54 cm Can be installed Can be

installed Cannot be
60 cm Can be installed Cannot be installed
installed
1.3 Intended use
• Dryer has been designed for domestic use. It is not suitable
for commercial use and it must not be used out of its
intended use.
• Use the dryer only for drying laundry that are marked
accordingly.
• The manufacturer waives any responsibility arisen from
incorrect usage or transportation.
• Original spare parts will be available to repair the dryer for
a period of 10 years.

1.4 Child safety
• Packaging materials are dangerous for the children. Keep
packaging materials away from children.
• Electrical products are dangerous for the children. Keep

children away from the product when it is operating. Do
not let them tamper with the dryer. Use the child-proof
lock in order to prevent the children to tamper with the
dryer.
C Child-proof lock is on the control panel. (See Child

lock)
• Keep loading door closed even when the dryer is not in

use.
1.5 Compliance with the WEEE regulation and disposing of the
waste product
This product does not contain the harmful and prohibited substances which are
specified in the “Control of the Waste Electrical and Electronic Equipment” as pub-
lished by Republic of Turkey Ministry of Environment and Urbanization. It complies
with the WEEE Directive.
This product was made of high quality items and materials which are recyclable
and reusable. Therefore, do not dispose of the product at the end of its service life
with the domestic and other wastes. Take it to a collection point for the recycling of
electrical and electronic equipment. Please consult your local authorities to learn the nearest
collection point. Help protect the environment and natural resources by recycling used prod-
ucts. For children’s safety, cut the power cable and break the locking mechanism of the door, if
any, so that it will be non-functional before disposing of the product.

1.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not
contain harmful and prohibited materials specified in the Directive.
1.7 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance
with our National Environment Regulations. Do not dispose of the packaging materials togeth-
er with the domestic or other wastes. Take them to the packaging material collection points
designated by the local authorities.
1.8 Technical Specifications
EN
Height (Min. / Max.) 84,6 cm / 86,6 cm*
Width 59,5 cm
Depth 60,9 cm
Capacity (max.) 9 kg**
Net weight (plastic front door usage) 39 kg
Net weight (glass front door usage) 41 kg
Voltage
Rated power input See type label***
Model code
* Min. height: Height with adjustable feet are closed.

Max. height: Height with adjustable feet are opened maximum.
** Dry laundry weight before washing.
*** For the location of the type label on the dryer (see 2.1 Overview.)
C
Technical specifications of the dryer are subject to specification without notice to im-
prove the quality of the product.
C Figures in this manual are schematic and may not match the product exactly.
Values stated on markers on the dryer or in the other published documentation accompa-
C
nying with the dryer are obtained in laboratory in accordance with the relevant standards.
Depending on operational and environmental conditions of the dryer, these values may
vary.

2 Your Dryer
2.1 Overview
11
2
10
9
8
5
4
7
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening button
5. Ventilation grids
6. Adjustable feet
7. Kick plate
8. Type label
9. Lint filter
10. Water tank drawer
11. Power cord

Your Dryer
2.1 Package Contents
1 2 3 4 5
1. Water drain hose *

2. Filter drawer spare sponge*
3. User Manual
4. Drying basket*
5. Drying basket user manual*
*It can be supplied with your machine depending on its model.

3 Installation
B
Before the calling the nearest Authorized
Do not place the dryer on the
Service for the installation of the dryer, en-
power cable.
sure that electrical installation and water
drain is appropriate referring to the user's 3.2 Removing the
manual.(See 3.3 Connecting to the drain and
3.5 Electrical connection) If they are not
transportation safety assembly
A
suitable, contact a qualified electrician and Remove the transportation safety
technician to make necessary arrangements. assembly before using the dryer
for the first time.
C
Preparation of the dryer's location
as well as the electrical and Open the loading door.
waste water installations is under There is a nylon bag inside the drum that
customer's responsibility. contains a piece of styrofoam. Hold it from its
section marked with XX XX.
A Prior to installation, visually check

if the dryer has any defects on it. If
the drier is damaged, do not have
it installed. Damaged products
Pull the nylon towards yourself and remove
the transportation safety assembly.
cause risks for your safety.
3.1 Appropriate installation

location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated,
dust-free environment.
A
• The gap between the dryer and the Check that no part of the
surface should not be reduced by the transportation safety assembly
materials such as carpet, wood and tape. remains inside the drum.
• Do not cover the ventilation grills of the
dryer.
• There must not be a lockable, sliding or 3.3 Connecting to the drain
hinged door that may block the opening In products equipped with condenser unit,
of the loading door in the place where water accumulates in the water tank during
your dryer is to be installed. the drying cycle. You should drain accumu-
• Once the dryer is installed, it should stay lated water after each drying cycle.
at the same place where its connections You can directly drain accumulated water
have been made. When installing the through the water drain hose supplied with
dryer, make sure that its rear wall does the product instead of periodically draining
not touch anywhere (tap, socket, etc.). the water collected in the water tank.
• Place the dryer at least 1 cm away from Please refer to the detailed instructions sup-
the edges of other furniture. plied with the accessories pack.
• Your dryer can be operated at Connecting the water drain hose
temperatures between +5°C and +35°C. 1-2 Pull hose at the behind of the dryer by
If the operating conditions fall outside hand in order to disconnect it from where
of this range, operation of the dryer it is connected. Do not use any tools to
will be adversely affected and it can get remove the hose.
damaged.
• The rear surface of the tumble dryer shall 3 Connect one end of the drain hose
be placed against a wall. supplied with the dryer to the connection
point from where you removed the hose
of the product in previous step.

Installation
C
4 Connect the other end of the drain hose
directly to the wastewater drain or to the Never unscrew the adjustable feet
washbasin. from their housings.
1 2 3.5 Electrical connection

For specific instructions for electrical connec-
tion required during installation (See 1.1.1
Electrical Safety)
3.6 Transportation of the dryer

Unplug the dryer before transporting it.
3 4 Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
We recommend carrying the
A dryer in upright position. If it is

not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
A
Hose connection should be made looked from the front.
in a safe manner. Your drain house
will be flooded if the hose comes
out of its housing during water 3.7 Changing the illumination
discharge.
lamp
C
Water drain hose should be In case an illumination lamp is used in your
attached to a height of maximum laundry dryer.To change the Bulb/LED used
100 cm. for illumination of your tumble dryer, call your
Authorized Service.
C
Make sure that the water drain
The lamp(s) used in this appliance is not suit-
hose is not stepped on and it is
able for household room illumination. The
not folded between the drain and
intended purpose of this lamp is to assist the
the machine.
user to place laundry in the tumble dryer in a
3.4 Adjusting the feet comfortable way. The lamps used in this ap-
In order to ensure that the dryer operates pliance have to withstand extreme physical
more silently and vibration-free, it must stand conditions such as vibrations and tempera-
level and balanced on its feet. Balance the tures above 50 °C.
machine by adjusti
ng the feet.
Turn the feet to left or right until the dryer
stands level and firmly.

4 Electrical Connection
A
Make sure that you have an earthed power
outlet socket rated at 13 amps (minimum). Do not operate without the top
cover fitted. Risk of injury.
4.1 Attention!
A
When installed, the socket must be reachable
after installation, or a separate switch (which Important
can disconnect the two poles) must be used
in the installation. Check for suitability.
For a permanent connection, a master switch
with at least 3mm contact clearance and 4.3 Fitting a different plug
minimum 13 A rating must be used. As the colours of the wires in the mains lead
of this appliance may not correspond with the
4.2 Electrical requirements coloured markings identifying the terminals
Before you insert the plug into the wall socket on your plug, proceed as follows:
make sure that the voltage and the frequency 1 Connect the green - yellow or green (earth)
shown in the rating label corresponds to your wire to the terminal in the plug marked ‘E’ or
electricity supply. with the symbol or coloured green and yellow
We recommend that this appliance be or green.
connected to the mains supply via a suitable 2 Connect the blue (neutral) wire to the
switched and fused socket in a readily terminal in the plug marked ‘N’ or coloured
accessible position.
Green and yellow
or green
Should the mains lead of the appliance

become damaged or need replacing at any
time, it must be replaced by a special purpose
made mains lead which can only be obtained
from a Authorised Service Agent.
A Warning
N
Blue or black
L
Brown or red
This appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off black.
and an appropriate plug fitted. 3 Connect the brown (live) wire to the
The moulded plug on this appliance terminal in the plug marked ‘L’ or coloured red.
incorporates a 13A fuse. Should the fuse With the alternative plugs a 13A fuse must be
need to be replaced an ASTA approved fitted either in the plug or adaptor or in the
BS1362 fuse of the same rating must be main fuse box. If in doubt contact a qualified
used. Do not forget to refit the fuse cover. electrician.
In the event of losing the fuse cover, the
plug must not be used until a replacement 4.4 Washer/dryer combination
fuse cover has been fitted. Colour of the Do not stack washing machine on top of
replacement fuse cover must be the same the tumble dryer. This would damage both
colour as that visible on the pin face of the appliances and guarantees would become
plug. Fuse covers are available from any good void. It is also unsafe to stack an appliance
electrical store. on top of another without using a suitable
In order to avoid hazards, damaged supply and approved stacking kit obtained from the
cord should be replaced by the manufacturer, manufacturer of the appliances.
its service agent or similarly qualified people. • A special stacking kit is required as an
Built-under installation optional extra please contact customer
This appliance can be installed under a service.
worktop.

5 Preparation
5.1 Laundry suitable for drying in the dryer
• Always obey the instructions given on the garment tags. Dry only the laundry having a
label stating that they are suitable for drying in a dryer and make sure that you select the
appropriate programme.
LAUNDRY DRYING SYMBOLS
Drying Suitable for

Symbols No Iron Sensitive / Do not dry Do not dry Do not dry-
dryer Delicate dry clean
At high temperature with dryer
At any temperature
At low temperature
Drying
Hang wet to dry

Without heating
Settings
Lay in shadow
Dry-cleanable
temperature
Hang to dry
At medium
Lay to dry
to dry
Iron -
Iron at high Iron at medium

Iron at low
Iron without
Do not iron
Dry or Steam temperature temperature
steam
temperature
Maximum temperature 200 0C 150 0C 110 0C
5.2 Laundry not suitable for 5.4 Things to be done for

drying in the dryer energy saving
Following information will help you use the
C
Delicate embroidered fabrics, dryer in an ecological and energy-efficient
woollen, silk garments, delicate manner.
and valuable fabrics, airtight • Spin your laundry at the highest speed
items and tulle curtains are not possible when washing them. Thus, the
suitable for machine drying. drying time is shortened and energy
consumption is reduced.Sort out the
5.3 Preparing laundry for laundry depending on their type and
drying thickness. Dry the same type of laundry
• Laundry may be tangled with each other together. For example thin kitchen towels
after washing. Separate the laundry items and table clothes dries earlier than thick
before placing them into the dryer. bathroom towels.
• Dry garments having metal accessories • Follow the instructions in the user manual
such as zippers, inside out. for programme selection.
• Fasten the zippers, hooks and buckles and • Do not open the loading door of the
button sheets. machine during drying unless necessary.
If you must certainly open the loading
door, do not to keep it open for a long
time.
• Do not add wet laundry while the dryer is
in operation
• Clean the lint filter before or after each
drying cycle
Preparation
• Clean the condenser regularly at least Following weights are given as examples.
once every month or after every 30 drying
cycles. Approximate weights
Laundry
• Ventilate the room, where the dryer is (g)*
located, well during drying. Cotton quit covers
1500
5.5 Correct load capacity (double)
Follow the instructions in the “Programme Cotton quit covers
1000
selection and consumption table”. Do not load (single)
more than the capacity values stated in the Bed sheets (double) 500
table.
Bed sheets (single) 350
Large tablecloths 700
Small tablecloths 250
Tea napkins 100
Bath towels 700
Hand towels 350
Blouses 150
Cotton shirts 300
Shirts 250
Cotton dresses 500
Dresses 350
C
It is not recommended to load Jeans 700
the dryer with laundry exceeding
the level indicated in the figure. Handkerchiefs (10
100
Drying performance will degrade pieces)
when the machine is overloaded. T-Shirts 125
Furthermore, dryer and the laundry *Dry laundry weight before washing.
can get damaged.

6 Operating the product
6.1 Control panel
1 2 3
6 5 4
1. Programme selection knob

2. Remaining duration indicator
3. On/Off button
4. Start/pause button
5. End duration button
6. Sound warning button
6.2 Screen symbols
Tank Child-proof Filter Volume up Mute Anti

full lock cleaning Creasing

Operating the product
6.3 Preparing the machine 6.5 Main Programmes
1. Plug in the machine The main Programmes are given below based
2. Place laundry inside the machine. on fabric type.
3. Press the On/Off button. • Cotton
4. When your machine turns on for the first Dry durable laundry with this Programme. It
time, it turns on with the declaration dries in normal temperature. Recommended
(cotton cabinet dryness) Programme. for use with your cotton laundry (sheets, bed
C Pressing the On/Off button covers, towels, bathrobes etc.)

doesn‘t mean the Programme • Synthetic
starts. Dry laundry that is not very durable with this
Press the Start / Pause button to Programme. Recommended for use with your
start the Programme. synthetic laundry.
6.6 Extra Programmes
The following extra Programmes are available
6.4 Programme selection in the machine for special conditions.
1. Determine the appropriate Programme
2.
from the chart below containing the
drying levels.
Select the Programme you desire using
C Extra Programmes may vary
according to the specifications of
your machine.
C
the Programme Selection knob. In order to receive better results
from drying machine Programmes,
your laundry should be washed
Only cotton laundry is dried in
with the appropriate Programme
normal temperature.
in your washing machine and
Thick and multi-layered laun-
wringed with recommended
Extra Dry dry (towels, sheets, jeans etc.)
wringing revolution..
are dried so that they can be
placed into wardrobe without • Jeans
ironing. Use to dry jeans that are wringed with high
rpm in washing machine.
Normal laundry (tablecloths, • Sport
Cupboard underwear etc.) are dried so Used to dry the laundry that are made of
dry that they can be placed into synthetic, cotton or mixed fabrics and have
wardrobe without ironing. a tag indicating that they are suitable for
Normal laundry (Ex: table- drying.
cloths, underwear) are again • Shirts 15 min.
Cupboard dried so that they can be Dries shirts more delicately and thus causes
dry Plus placed into the wardrobe but less wrinkles for easy ironing.
more so than the wardrobe • Baby Protect
dryness option. Programme used for baby clothing with can
Normal laundry (shirts, be dried approval on the label.
Iron Dry dresses etc) are dried ready
for ironing.
C Very little dampness might remain
on the shirts after the Programme.
C For detailed Programme

information see. „Programme
selection and consumption table“..
It is recommended that you do
not leave the shirts in the drying
machine.
• Delicates
You can dry your delicates suitable for drying
or laundry that is recommended to hand wash
(silk blouses, thin underwear etc.) in low tem-
perature.
C It is recommended to dry your

delicates in laundry bag to prevent
wrinkles and damage. When the
Programme ends, take your laundry
out of the machine immediately
and hang them to prevent wrinkles.
• Freshen Up
It only performs ventilation for 10 minutes
without blowing hot air. You can ventilate the
cotton and linen clothing that has remained
closed for a long duration and remove their
odor.
• Timed Programmes
You can select the 10 mins, 20 mins, 40 mins
and 60 mins time Programmes to achieve the
desired final drying level with low tempera-
ture.
C On this Programme, the machine

dries as long as the set duration,
regardless of the drying level.

6.7 Programme selection and consumption table
EN
Spin speed in washing Approximate amount Drying time (minutes)

Programs Capacity (kg) machine (rpm) of remaining humidity
Cottons / Coloreds
A Extra dry 9 1000 % 60 159
A Cupboard dry 9 1000 % 60 149
A Iron dry 9 1000 % 60 112
Shirts 15 min. 0.5 1200 % 60 15
Jeans 4 1200 %50 80
Sport 4 1000 %60 92
Delicates 2 600 %40 40
BabyProtect 3 1000 % 60 70
Synthetics
B Cupboard dry 4.5 800 % 40 58
B Iron dry 4.5 800 % 40 50
Energy consumption values
Spin speed in washing Approximate amount Energy consumption

Programs Capacity (kg) machine (rpm) of remaining humidity value kWh
Cottons linen Ready to wear* 9 1000 % 60 5,12
Cottons Ready to iron 9 1000 % 60 4,1
Synthetics Ready to wear 4.5 800 % 40 1,9
Power consumption of the off-mode for the standart cotton programme at full load, PO (W) 0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W) 1,0
„Cotton cupboard dry Programme“ used at full and partial load is the standard
drying Programme to which the information in the label and the fiche relates, that
this Programme is suitable for drying normal wet cotton laundry and that it is the
most efficient Programme in terms of energy consumption for cotton.
C When selecting the Cottons programme, send the condensed water out through
the drain hose.
* : Energy Label standard Programme (EN 61121:2012) “All the filters must be cleaned prior to
test series.”All the values in the table are determined according to EN 61121:2012 standard.
Consumption values may vary from the values in the table depending on laundry type, wring-
ing revolution, ambient conditions and changes in voltage.

6.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings when
the Programme is completed. If you don’t
want sound notifications, press the “Sound Loading door open
Notification” button. Start/Pause led blinks when the loading door
When you press the sound notification but- of the drying machine is open.
ton it lights up, and Programme does not
make sound notifications when completed. 6.10 End duration
You can delay the end duration of the
Programme for up to 24 hours with the end
C You can select this function

before or after the Programme
starts.
duration function.
1. Open the loading door and place your
laundry.
2. Select the drying Programme.
3. Press the end duration selection button
6.9 Warning symbols and set the delay duration you want.
C Warning symbols may vary End duration led lights up. (End dura-
according to the specifications of tion moves continuously when you keep
your machine. pressing the button).
4. Press the Start / Pause button. End dura-
tion countdown begins. The “:” sign in
Fiber filter cleaning the middle of the displayed delay dura-
When the Programme is completed, a warn- tion blinks.
ing led lights up, which indicates that the
filter has to be cleaned.
C You can add or remove laundry
for the duration of the end
duration. The duration displayed
on the screen is the sum of the
normal drying duration and the
end duration. At the end of the
countdown the end duration led
turns off, drying beings and drying
C
led lights up.
If the filter cleaning led blinks, see
the „Troubleshooting“ chapter.
Changing the end duration
If you want to change the duration during the
Water tank countdown:
When the Programme is completed, a warn- 1. Cancel the Programme by pressing the
ing led lights up, which indicates that the On/Off button. Turn on the drying ma-
water tank must be emptied. chine again by pressing the On/Off but-
If the water tank fills up while the Programme ton. When your drying machine turns
is running, warning led starts blinking and on for the first time, it turns on with the
the machine goes into stand-by. In that declaration (cotton wardrobe dryness)
case empty the water in the water tank and Programme.
start the Programme by pressing the Start / 2. Select the Programme you desire using
Pause button. Warning led turns off and the the Programme Selection knob.
Programme resumes. 3. Repeat the end duration operation for
the duration you want.
4. Start the Programme by pressing the
Start / Pause button.

Canceling the end duration function A warning sound is heard when any button
If you want to cancel the end duration setting is pressed (except for On/Off button) or the
countdown and start the Programme right Programme Selection knob is turned while
away: the child lock is active.
1. Cancel the Programme by pressing the
On/Off button. Turn on the drying ma-
chine again by pressing the On/Off but- 6.13 Changing the Programme
ton. When your drying machine turns after it is started
on for the first time, it turns on with the After the machine starts running, you can
declaration (cotton wardrobe dryness) change the Programme you selected to dry
Programme. your laundry with a different Programme.
2. Select the Programme you desire using 1. For example, to select Extra Dry
the Programme Selection knob. Programme instead of the Iron Dryness,
3. Start the Programme by pressing the stop the Programme by pressing the
Start / Pause button. Start / Pause button.
2. Turn the Programme Selection knob to
select the Extra Dry Programme.
6.11 Starting the Programme 3. Start the Programme by pressing the
Start the Programme by pressing the Start / Start / Pause button.
Pause button.
Start/Pause led and the Drying led light up, Adding and removing laundry in
indicating the Programme started. The “:” sign stand-by mode
in the middle of the remaining duration starts If you want to add or remove laundry after
to blink. the drying Programme starts:
1. Press the Start/Pause button to take the
6.12 Child Lock machine into Stand-by mode. Drying op-
The machine features a child lock which pre- eration stops.
vents the machine Programme flow from be- 2. Open the loading door, add or remove
ing affected when buttons are pressed during laundry and close the loading door.
operation. 3. Start the Programme by pressing the
Start / Pause button.
When the Child Lock is active, all buttons ex-
cept for the On/Off button are deactivated.
To activate the child lock, press the Sound
Notification button and End Duration button
C The laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the wet
simultaneously for 3 seconds.
laundry and the laundry to remain
Te child lock should be deactivated to be able damp after the operation ends..
C
to start a new Programme after the current Laundry adding and removing can
Programme ends or to be able to interfere be repeated as much as desired
with the current Programme. Keep the same during drying operation.
buttons pressed for 3 seconds again to deac- But this process would
tivate the child lock. continuously interrupt the drying
operation, and so would cause the
C The lock led on the screen Programme duration to lengthen

lights up when the Child Lock is and increase energy consumption.
activated. Thus, it is recommended to add
laundry before the Programme
C Child Lock deactivates when the

machine is turned off and on
again using the On/Off button.
starts.

6.15 Programme end
C If a new Programme is selected
by changing the position of the
Programme selection knob while
your machine is in stand-by mode,
When the Programme ends, the Final/Wrinkle
Prevention, Fiber Filter Cleaning and Water
Tank Warning leds on the Programme follow
the running Programme ends. up indicator light up. Loading door can be
opened and machine becomes ready for a
Do not contact the inner surface second run.
of the drum when adding or Press the On/Off button to turn off the ma-
removing laundry during a chine.
continuing Programme. The drum
surface is hot.
6.14 Cancelling the Programme

C In case the laundry is not
removed after the Programme is
completed, the wrinkle prevention
Programme that lasts 2 hours
If you want to cancel the Programme and end start in order to prevent wrinkling
the drying operation for any reason after the of the laundry that remains inside
machine starts running, press the On/Off but- the machine.
ton.
A As it will be extremely hot inside

the machine when you cancel the
Programme while the machine is
C Clean the fibre filter after each
drying. (See. „Fibre filter and
loading door inner surface“)
in operation; run the ventilation

Programme to cool it down. C Empty the water tank after each
drying. (See. „Emptying the water
tank“)

7 Maintenance and cleaning
Service life of product extends and frequently before reinstalling it.
experienced problems will be reduced if it is
cleaned at regular intervals.
7.1 Cleaning Lint Filter /

Loading Door Inner Surface
Lint and fibre released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
C
Such fibre and lint are generally • Clean the entire inner surface of the
formed during wearing and loading door and loading door gasket
washing. with a soft damp cloth.
A
Always clean the lint filter and the
inner surfaces of the loading door
after each drying process.
C
You can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:

• Open the loading door.
• Remove the lint filter by pulling it up and
open the lint filter.
• Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth.
• Close the lint filter and place it back into
its housing.
7.2 Cleaning the sensor

There are dampness sensors in the dryer that
detect whether the laundry is dry or not.
To clean the sensors:
• Open the loading doorof the dryer.
• Allow the machine to cool down if it is still
hot due to the drying process.
• Wipe the metal surfaces of the sensor
with a soft cloth, dampened with vinegar
and dry them.
C
• A layer can build up on the filter pores Clean metal surfaces of the
that can cause clogging of the filter after sensors 4 times a year.
using the dryer for a while. Wash the
Do not use metal tools when
C
lint filter with warm water to remove
the layer that builds up on the lint filter cleaning metal surfaces of the
surface. Dry the lint filter completely sensors.

Maintenance and cleaning
Never use solvents, cleaning • Drain the water in the tank.
A
agents or similar substances for
cleaning due to the risk of fire and
explosion!
• If there is lint accumulation in the funnel

of the water tank, clean it under running
water.
• Place the water tank into its seat.
7.3 Draining the water tank

Dampness of the laundry is removed and
C If the direct water draining is used
as an option, there is no need to
empty the water tank.
condensed during drying process and the wa-
ter that arise accumulates in the water tank.
Drain the water tank after each drying cycle.
7.4 Cleaning the condenser;
Hot and humid air in the condenser is cooled
A
with the cold air from the room. Thus, the hu-
Condensed water is not drinkable! mid air circulating in your dryer is condensed
and then pumped into the tank.
A C
Never remove the water tank Clean the condenser after every
when the programme is running! 30 drying cycles or once a month.
If you forget to drain the water tank, the ma-
chine will stop during the subsequent drying To clean the condenser:
cycles when the water tank is full and the 1. If a drying process has been carried out,
Water Tank warning symbol will flash. If this open the door of the machine and wait
is the case, drain the water tank and press until it cools down.
Start / Pause button to resume the drying
cycle.
To drain the water tank:
Pull the drawer and remove the water tank
carefully.

Maintenance and cleaning
2. Unlock the 2 condenser locks after opening 5. Place the condenser in its housing. Fasten
the kick plate. the 2 locks and make sure that they are
seated securely.
3. Pull out the condenser.

6. Close the kick plate cover.
4. Clean the condenser by applying

pressurized water with a shower head
and wait until the water drains and the
condenser is dry.

8 Troubleshooting
Drying process lasts for a long time.
• Pores of the fibre filter might be clogged. >>> Wash the filter with warm water.
• Condenser might be clogged. >>> Wash the condenser.
• Ventilation grills at the front of machine might be blocked. >>> Remove any items in
front of the ventilation grills that block ventilation.
• Ventilation might be inadequate if the installation area is very small. >>> Open the
windows and doors in order to prevent excessive increase in room temperature.
• There might be furring on the damp sensor. >>> Clean the damp sensor.
• Laundry might be overloaded. >>> Do not overload the tumble drier.
• Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier.
Laundry is still wet at the end of drying.
C Hot laundry unloaded at the end of drying feel wetter than they really are.
• You may not have used a programme suitable for laundry type.>>> Check the
maintenance labels on the laundry and select a programme suitable for their type, or
use the time programmes additionally.
• Pores of the fibre filter might be clogged. >>> Wash the filter with warm water.
• Laundry might be overloaded. >>> Do not overload the tumble drier.
• Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier.
Tumble drier does not turn on or programme cannot be started. Tumble drier does not acti-
vate when set.
• The power cord might not be plugged in. >>> Make sure the power cord is plugged in.
• Loading door might be open. >>> Make sure that the loading door is properly closed.
• You may not have set the programme or pressed the Start/Pause button. >>> Make
sure that you have set the programme and it is not in Pause position.
• Child lock might be active. >>> Disable the child lock.
Programme was interrupted for no reason.

• Loading door might not be properly closed. >>> Make sure that the loading door is
properly closed.
• A power cut might have occurred. >>> Press the Start/ Pause button to start the
programme.
• Water tank might be full. >>> Drain the water tank.
Laundry is shrunk, damaged or worn out.
• You may not have used a programme suitable for laundry type. >>> Check the
maintenance labels on the laundry and select a programme suitable for their type.
The lighting inside the tumble drier does not turn on. (In models with lamps)
• You may not have turned on the tumble drier be using On/Off/Cancel button. >>> Make
sure that the tumble drier is at ‘on’ position.
• Lamp might be broken. >>> Contact the Authorised Service for the replacement of
lamp.

Troubleshooting
Filter cleaning warning led is on.
• Fibre filter might not have been cleaned. >>> Clean the filter.
Filter cleaning warning led flashes.
• Filter bearing might be clogged with fibre. >>> Clean the filter bearing.
• There might be a layer in the filter pores that causes clogging. >>> Wash the filter with
warm water.
Water is leaking from the condenser cover.
• There might be fibre build-up inside the loading door and on the surfaces of loading
door gasket. >>> Clean the inner surfaces of loading door and surfaces of loading
door gasket.
Loading door opens itself.
• Loading door might not be properly closed. >>> Push the loading door until you hear
the closing sound.
Water tank warning led is on/flashes.
• Water tank might be full. >>> Drain the water tank.
• Water drain hose might be folded. >>> Check the water drain hose if the product is
directly connected to the water outlet.
A
If you cannot eliminate the problem despite following these instructions, please
contact the vendor that sold you the product or an Authorised Service. Do not try
.to repair the product yourself

Service
Please keep your purchase receipt or other proof of purchase in a safe place; you will need to
have it should the product require attention under guarantee.
You should also complete the details below; it will help us assist you when requesting service.
(The model number is printed on the Instruction Booklet and the serial number is printed on
the Rating Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
Republic of Ireland
All Refrigeration, 01 862 3411
All Cookers
Washing Machines & Dryers, Tumble Dryers Dishwashers
Before requesting service please check the trouble-shooting guide in the Operating
Instructions as a charge may be levied where no fault is found even though your product may
still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions contained
within the extended guarantee agreement document. Otherwise please call the appropriate
number above where service can be obtained at a charge.
Should you experience any difficulty in obtaining service please contact the Customer Help-
Line.
Tel: 0845 600 4911
For service under guarantee simply telephone the appropriate number below.
UK Mainland & Northern Ireland

Fridges & Freezers 0345 600 4903 or 0845 600 4903
Electric Cookers 0345 600 4902 or 0845 600 4902
Gas & Dual Fuel Cookers
0345 600 4905 or 0845 600 4905
Washing Machines & Tumble Dryers
0345 600 4906 or 0845 600 4906
Guarantee
Your new product is guaranteed against the cost of breakdown repairs for twelve months
from the date of the original purchase.
What is covered?
• Repairs necessary as a result of faulty materials, defective components or
manufacturing defect.
• The cost of functional replacement parts, but excluding consumable items.
• The labour costs of a approved repairer to carry out the repair.
What is not covered?
• Transit, delivery or accidental damage or misuse and abuse.
• Cabinet or appearance parts, including knobs, flaps, handles or container lids.
• Accessories or consumable items including but not limited to, ice trays, scrapers,
cutlery baskets, filters and light bulbs.
• Repairs required as a result of unauthorised repair or inexpert installation that fails to
meet the requirements contained in the user instruction book.
• Repairs to products used on commercial or non-residential household premises.
• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often
included within your household contents insurance policy, or may be available
separately from your retailer).
Important notes
• Your product is designed and built for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or non-
residential domestic household premises.
• The product must be correctly installed, located and operated in accordance with the
instructions contained in the User Instructions Booklet provided.
• Professional installation by a qualified Electrical Domestic Appliance Installer is
recommended for all Washing Machines,Tumble Dryers, Dishwashers, Dryers and
Electric Cookers
• Gas Cookers must only be installed by a Gas safe registered Gas Installer.
• The guarantee is given only within the boundaries of the United Kingdom and the
Republic of Ireland.
• The guarantee is applicable only to new products and is not transferable if the
product is resold.
• Disclaims any liability for incidental or consequential damages.
• The guarantee does not in anyway diminish your statutory or legal rights.
Beko plc, Beko House, 1 Greenhill Crescent, Watford, WD18 8QU
Tel: 0845 6004911

Email: [email protected]
Fax: 0845 6004922

www.beko.co.uk

DCY9316

Uploaded by

Copyright:

Available Formats

DCY9316

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DCY9316

Uploaded by

Copyright:

Available Formats

Dryer

B Warning against electric shock.

Warning against hot surfaces.

Warning against fire hazard.

Packaging materials of the

4 / EN Dryer / User Manual

A Electrical safety instructions should be followed

B Damaged mains cable should be changed by an

B If the dryer is faulty, it must not be operated unless

Dryer / User Manual 5 / EN

• Superheating of the clothes inside of the dryer can

Points to be taken into consideration for fire

6 / EN Dryer / User Manual

Clothes that are washed inadequately may ignite on

Dryer / User Manual 7 / EN

8 / EN Dryer / User Manual

Installation Table for Washing Machine and Dryer

54 cm Can be installed Can be

Dryer / User Manual 9 / EN

• Electrical products are dangerous for the children. Keep

C Child-proof lock is on the control panel. (See Child

• Keep loading door closed even when the dryer is not in

10 / EN Dryer / User Manual

* Min. height: Height with adjustable feet are closed.

Dryer / User Manual 11 / EN

12 / EN Dryer / User Manual

1. Water drain hose *

*It can be supplied with your machine depending on its model.

Dryer / User Manual 13 / EN

A Prior to installation, visually check

cause risks for your safety.

3.1 Appropriate installation

14 / EN Dryer / User Manual

1 2 3.5 Electrical connection

3.6 Transportation of the dryer

A dryer in upright position. If it is

Dryer / User Manual 15 / EN

Should the mains lead of the appliance

16 / EN Dryer / User Manual

LAUNDRY DRYING SYMBOLS

Drying Suitable for

Hang wet to dry

Iron at high Iron at medium

Maximum temperature 200 0C 150 0C 110 0C

5.2 Laundry not suitable for 5.4 Things to be done for

18 / EN Dryer / User Manual

1. Programme selection knob

6.2 Screen symbols

Tank Child-proof Filter Volume up Mute Anti

Dryer / User Manual 19 / EN

C Pressing the On/Off button covers, towels, bathrobes etc.)

C For detailed Programme

C It is recommended to dry your

C On this Programme, the machine

Dryer / User Manual 21 / EN

Spin speed in washing Approximate amount Drying time (minutes)

A Extra dry 9 1000 % 60 159

A Cupboard dry 9 1000 % 60 149

A Iron dry 9 1000 % 60 112

Shirts 15 min. 0.5 1200 % 60 15