TDS SP Anti-Rust Plus 812 - en 101124
TDS SP Anti-Rust Plus 812 - en 101124
TDS SP Anti-Rust Plus 812 - en 101124
DESCRIPTION STANDARD
SP ANTI-RUST PLUS 812 is a high quality
anti-rust oil with quick water displacement and
good demulsifier properties. With advanced
anti-rust additive technology and paraffin wax-
free additive APR ver 8.1, SP ANTI-RUST
PLUS 812 is a top choice for industrial rust
preventive.
APPLICATION BENEFITS
SP ANTI-RUST PLUS 812 is recommended • Excellent water repellency and de emulsification
for: properties.
✓ Protects against discoloration of metal • Outstanding rust protection even in humid
parts, mechanical components, and CNC environments.
details.
• Compatible with various paints and surface
✓ Excellent protection for sheet metal, pipe coatings.
steel, and other types of steel in various
• Suitable for cold weather due to its low freezing
environmental conditions.
point and high stability.
✓ The product is suitable for most oil
• Easily removed using standard cleaning
applications, including protection of internal
processes.
machine components.
SP ANTI-RUST PLUS 812 has the best
protection for processed products before
packaging and indoor storage.
TYPICAL SPECIFICATION
* Minor variations in product typical test data are to be excepted in normal manufacturing
Product introduction 11-2024
PACKING STORAGE
Storage temperature: Less than 60oC. Avoid
direct sunlight.
Keep away from heat sources and sources of
ignition, avoid water contamination, and do not
mix with other oils.
18L 200L 1000L As required
Care should be taken when handling solvent-
based rust inhibitors, as the solvent is
flammable. When applying by spraying, ensure
proper ventilation.
ENVIRONMENT, HEALTH & SAFETY ADDITIONAL INFORMATION
▪ Health & safety ▪ RECOMMENDATION
SP ANTI-RUST PLUS 812 does not pose any SP ANTI-RUST PLUS 812 is anti-rust oil, not
significant health hazard when used according rust remove products, requiring clean surface for
to instructions and in compliance with personal the best protection result.
and industrial hygiene standards.
Do not use oil to protect non-metallic parts.
Avoid contact with skin. Use impermeable
Oil can be used by spray, drip or sweep method.
gloves with used oil. If skin contact occurs,
wash immediately with soap and water. When treating by spraying, appropriate
ventilation is required.
▪ Protect environment
The rate of surface covering when immersing is
Collect used oil to designated collection points.
usually from 20m2/ liter.
Do not discharge into sewers, ground or water
sources. It is unnecessary to clean this oil film unless it
has to be painted or plated.
Guidance on Health and Safety in available on
the appropriate Material Safety Data Sheet ▪ Technical assistance
(MSDS). For more information, visit our website
www.apsaigonpetro.com. Hotline: 1900 0104
▪ Cleaning method
Use petroleum solvents or alkaline solutions.
Petroleum solvents include hydrogenated white
spirits (Dilutine, Exxsol D, Halpasol, Hydrosol,
Indusol, Sangajol, Shellsol D, Solfina, Solnap,
Spirdane, Tetrasol, Varsol).
Alkaline solutions may contain phosphates (pH
9.5 to 11.5) or surfactants.