Scribd
Upload
261 views14 pages

VSA Client - Installation Procedure

The document provides instructions for installing and configuring a VSA client on a Unix system. It describes prerequisites like available disk space and open ports. It outlines steps to untar the client software, run ping tests to verify connectivity, and schedule security scans. It also provides instructions for removing a VSA client by deleting configuration files and stopping services. Issues addressed include requiring a separate /tmp partition and checking port status if the system does not work. The conclusion recommends reinstalling the client and contacting an IBM email for any remaining VSA issues.

Uploaded by

Kishore Venkata B
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
261 views14 pages

VSA Client - Installation Procedure

The document provides instructions for installing and configuring a VSA client on a Unix system. It describes prerequisites like available disk space and open ports. It outlines steps to untar the client software, run ping tests to verify connectivity, and schedule security scans. It also provides instructions for removing a VSA client by deleting configuration files and stopping services. Issues addressed include requiring a separate /tmp partition and checking port status if the system does not work. The conclusion recommends reinstalling the client and contacting an IBM email for any remaining VSA issues.

Uploaded by

Kishore Venkata B
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 14

Page 1 of 14Created by IBM_USER Overall view picture of vsa

Page 2 of 14Created by IBM_USER

Login to https://vsa.boulder.ibm.com/ for more information

1.VSA client v 2.5.4 installation and addition procedure 1. Oldtux200 is proxy server for VSA software. Login to oldtux200 2. from otrs07 ssh to oldtux200

Page 3 of 14Created by IBM_USER

ftp client.tar.gz to /tmp of the system ,where vsa clients need to be installed.

To install VSA client on Unix system Prerequisite / - 10 MB free /tmp -150 MB free /var ----100 MB free separate /tmp file system . Then check for 6543 port open in both direction it need to work fine

Page 4 of 14Created by IBM_USER

Start installation 1. come to /tmp untar the client.tar.gz

Verify the output Confirm Ping test worked fine. -> WRS VSACOMM Installed -> Running client ping Got Ping! [pear-vsawrs] -------------------------------------------------------------------------------Hop VSAUUID LOCALTIME HOSTNAME -------------------------------------------------------------------------------1 VSA5080F93E71B611DC9B390011251E497C Wed Oct 3 07:51:52 2007 oldtux133 2 VSAA89DA560C69811DA9D320011251E497C Wed Oct 3 08:50:51 2007 oldtux200 -------------------------------------------------------------------------------Duration: 2s Run dragnet on client

wait for 10 minutes login to


https://167.210.153.197 Login as rammaghenthar Passwd : set4ram Please let me know persions name if anybody use this id.

Page 5 of 14Created by IBM_USER

Accept yes

click login Login as rammaghenthar Passwd : set4ram

Page 6 of 14Created by IBM_USER

Select Unix e-admin

on manage menu select modify applications

Choose App Name Pearson UNIX

Page 7 of 14Created by IBM_USER

Select host from available hosts list and then click Assign Host(s) to Application And click done

Selection the modules

sedule the system

Page 8 of 14Created by IBM_USER

Select the Host name in the left side Select the Schedule frequency to Daily Schedule Type check Select Schedule Host(s)

Select lssecfix

Page 9 of 14Created by IBM_USER

Select the Host name in the left side Select the Schedule frequency to Daily Schedule Type check Select Schedule Host(s)

Select the sec_scan

Page 10 of 14Created by IBM_USER

Select the Host name in the left side Select the Schedule frequency to Daily Schedule Type check Select Schedule Host(s)

Page 11 of 14Created by IBM_USER

Then run dragnet s on VSA client . ( wait for 40 minutes)

Page 12 of 14Created by IBM_USER

select the WRS Administration

Page 13 of 14Created by IBM_USER

select the system then add then Ok VSA client removel procedure
1) rm /etc/e-admin.conf 2) rm -fr /etc/vsa 3) Remove "dragnet" line in root's cron 4) modify /etc/inittab and remove the line with: "vc:2345:respawn:/etc/vsa/bin/vsacomm/vsacomm" 5) kill -HUP xxxx where xxxx is PID of init. Usually it is "1" 6) rm -rf /tmp/vsacomm* /tmp/e-admin*
? instead

of the kill -HUP 1, you 1:19:30 can : init q PM

[root@oldtux200 client]# pwd /vsa/e-admin/software/client ftp client.tar.gz to < vsa client>/tmp 1. Problem
VSA need separate /tmp file system. If your system doesnt have temporary /tmp need to set FORCETEMP=1

Page 14 of 14Created by IBM_USER

Then save the file 2. problem port is not open check for status and correct it.

this is the problem with port so the system will not work . work resolve the network issue

3.You may not able to WRS server access to any VSA client . Solution Remove and reinstall VSA client on the client system. Then send a mail to [email protected] for VSA issuses

You might also like