TECHNICAL DATASHEET

Revision level A

Fibertex 820 Rockwool

INTRODUCTION BENEFITS

Bradford Fibertex 820 is a general purpose industrial • Lightweight highly durable insulation product
insulation for use on process equipment, vessels, tanks &
• Easily forms shape of equipment to be insulated
reactors. It is light duty thermal and acoustic insulation
suitable for continuous operation up to 820oC . • Excellent cost effective solution

• Non-combustible
PRODUCT DESCRIPTION
• Low chloride content
Bradford Fibertex 820 Rockwool is a lightweight medium
• Bio-soluble & safe to use product
density insulation product. Fibertex 820 is manufactured
from spinning a molten mixture of natural rock and
recycled product into fine wool like fibers. The inorganic AVAILABLE FACINGS
fibers are bonded together using a thermosetting resin to
Fibertex 820 is available as either un-faced board or
form the final product.
blanket. Foil facing enhances the flexibility, handling and
tensile strength, available by request.
APPLICATIONS

Fibertex 820 can be used in applications such as process HEALTH & SAFETY
temperature control, energy conservation, condensation
This product is manufactured to the latest Fiber Biosoluble
prevention, acoustic absorption treatment and personal
(FBS-1) Rockwool formulation and is not classified as
protection from plant and equipment.
hazardous according to the criteria of the ASCC guidelines.
Bradford Fibertex 820 is easily installed by impaling the For further information refer to the SUIS sheet.
batts or blankets on weld pins and securing with speed
clips. The un-faced surface is to be applied to the hot
surface to be insulated. On small vessels the insulation
may be simply retained by wire mesh or metal bands. For
acoustic panel applications ensure cavity dimension is
equal or less than product thickness.

SKU TABLE
THERMAL RESISTANCE MATERIAL
THICKNESS (mm) LENGTH (mm) WIDTH (mm) PIECES PER PACK M2 PER PACK
R-VALUE
BOARD
25 1200 600 0.7 12 8.64
50 1200 600 1.5 6 4.32
75 1200 600 2.1 4 2.88
FOIL FACED BLANKET
25 4000 600 0.7 2 4.8
50 4000 600 1.5 1 2.4
75 4000 600 2.1 1 2.4

Products not stocked in NZ may be subject to minimum runs. Please check with the Bradford NZ office before ordering.
 Fibertex 820 Rockwool
PHYSICAL PROPERTIES
DENSITY kg/m2 110
MAXIMUM SERVICE TEMPERATURE 820oC

Based on measurements obtained

THERMAL CONDUCTIVITY with guarded hot-plate apparatus in
accordance with BS874-1973

• Ignitability: 0
• Spread of flame: 0
FIRE HAZARD PROPERTIES AS/NZS 1530.3:1999 • Heat Evolved: 0
• Smoke Developed: 0

Based on measurements obtained

COMPRESSIVE RESISTANCE under compressive load, measured
in accordance with BS2972-1975

pH 7.5-9.0; Less than 20ppm soluble

CORROSION RESISTANCE BS 3958 part 5- 1969 chlorides
MOISTURE ABSORPTION ASTM C1104 Less than 0.2% by volume.
Publish date: 08/17 Doc Ref: RW Fibertex 820

CSR Bradford
For further information
PO Box 204115, Highbrook, Auckland, 2161
bradfordinsulation.co.nz call 0800 277 123 or
Email: [email protected] visit bradfordinsulation.co.nz
CSR Bradford is a business division of CSR Building Products Limited ABN 55 008 631 356
The contents of this brochure are copyright protected and may not be reproduced in any form without prior written consent of CSR Bradford. Recommendations
and advice regarding the use of the products described in this brochure are to be taken as a guide only, and are given without liability on the part of the
company or its employees. We reserve the right to change product specifications without prior notification, please refer to the CSR Bradford website for the
latest revision of this document. The purchaser should independently determine the suitability of the product for the intended use and application.