SUBMITTED BY:- SUBMITTED TO:-

VISHNU Mamatha mam

12TH CLASS PGT Chemistry
JNV BIDAR JNV BIDAR
ROLL NO:- .
 CERTIFICATE
This is hereby to certify that, the original and
Genuine investigation work has been carried
Out to investigation about the subject matter
and the related data collection and
investigation has been completed solely,
sincerely and satisfactory by,
VISHNU a student of class 12 for the academic
Session 2024-2025
Regarding the investigatory project entitled
“ CHEMICAL KINETICS ”
For Chemistry Department under direct
supervision of the Undersigned as the
requirement for the Board examination.

PRINCIPAL SUBJECT TEACHER

1
 ACKNOWLEDMENT

I would like to express my special thanks

of gratitude to my teacher MAMATHA
MAM as well as our principal Mr.
BHAVANA RUSHI who gave me the
golden opportunity to do this wonderful
project on the topic REACTION RATE
AND CATALYST, which also helped me
in doing a lot of Research and I came to
know about so many new things I am
really thankful to them.
Secondly I would also like to thank my
parents and friends who helped me a lot
in finalizing this project within the
limited time frame.

2
 INDEX
S. NO. PARTICULARS PAGE NO.

INTRODUCTION 5
1.
FACTORS AFFECTING
RATE OF REACTION 6
2.
EXPERIMENTAL
3. METHODS
CHANGE IN
CONCENTRATION WITH
4. TIME

5. COLLISION THEORY

6. CONCLUSION

7. BIBLLIOGRAPHY

3
  INTRODUCTION OF CHEMICAL
KINETICS:-

Chemical kinetics, also known as reaction kinetics, the branch of

physical chemistry that is concerned with understanding the
rates of chemical reactions. It is to be contrasted with
thermodynamics, which deals with the direction in which a
process occurs but in itself tells nothing about its rate. Chemical
kinetics includes investigations of how different experimental
conditions can influence the speed of a chemical reaction and
yield information about the reaction's mechanism and transition
states, as well as the construction of mathematical models that
also can describe the characteristics of a chemical reaction.

It includes investigations of how different experimental

conditions can influence the speed of a chemical reaction
and yield information about the reaction’s mechanism and
transition states, as well as the construction of
mathematical models that can describe the characteristics
of a chemical reaction

4
Chemical reactions vary greatly in the speed at which they
occur. Some are essentially instantaneous, while others
may take years to reach equilibrium.

The Reaction Rate for a given chemical reaction is the

measure of the change in concentration of the reactants or
the change in concentration of the products per unit time.
During the course of this reaction, reactant A is consumed
while the concentration of product B increases. The reaction
rate can be determined by measuring how fast the
concentration of A decreases, or by how fast the concentration
of B increases.

5
  FACTORS AFFECTING RATE OF REACTION:-

1. NATURE OF REACTANT:-

The reaction rate varies depending upon what substances

are reacting. Acid/base reactions, the formation of salts
and ion exchange are usually fast reactions. When
covalent bond formation takes place between the
molecules and when large molecules are formed, the
reactions tend to be slower.
The nature and strength of bonds in reactant molecules
greatly influence the rate of their transformation into
products.
2. PHYSICAL STATE:-

The physical state (solid, liquid, or gas) of a reactant is also

an important factor of the rate of change. When reactants
are in the same phase, as in aqueous solution, thermal
motion brings them into contact. However, when they are
in different phases, the reaction is limited to the interface
between the reactants. Reaction can occur only at their
area of contact; in the case of a liquid and a gas, at the
surface of the liquid. Vigorous shaking and stirring may be
needed to bring the reaction to completion. This means
that the more finely divided a solid or liquid reactant the
6
 greater its surface area per unit volume and the more
contact it with the other reactant, thus the faster the
reaction. To make an analogy, for example, when one
starts a fire, one uses wood chips and small branches —
one does not start with large logs right away. In organic
chemistry, on water reactions are the exception to the rule
that homogeneous reactions take place faster than
heterogeneous reactions.
3. SURFACE AREA OF SOLIDS:-
In a solid, only those particles that are at the surface can
be involved in a reaction. Crushing a solid into smaller
parts means that more particles are present at the surface,
and the frequency of collisions between these and
reactant particles increases, and so reaction occurs more
rapidly. For example, Sherbet (powder) is a mixture of very
fine powder of metallic acid (a weak organic acid)
and sodium hydrogen carbonate. On contact with
the saliva in the mouth, these chemicals quickly dissolve
and react, releasing carbon dioxide and providing for the
fizzy sensation. Also, fireworks manufacturers modify the
surface area of solid reactants to control the rate at which
the fuels in fireworks are oxidized, using this to create
different effects.

7
For example, finely divided aluminium confined in a shell
explodes violently. If larger pieces of aluminium are used,
the reaction is slower and sparks are seen as pieces of
burning metal are ejected.
4. CONCENTRATION :-
The reactions are due to collisions of reactant species. The
frequency with which the molecules or ions collide
depends upon their concentration. The more crowded the
molecules are, the more likely they are to collide and react
with one another. Thus, an increase in the concentrations
of the reactants will usually result in the corresponding
increase in the reaction rate, while a decrease in the
concentrations will usually have a reverse effect. For
example, combustion will occur more rapidly in pure
oxygen than in air (21% oxygen).
Let’s look at the reaction of nitrogen dioxide with fluorine
to give nitryl-fluoride .

2NO2 (g) + Fe2(s) 2NO2 F

The rate of this reaction has been observed to be

proportional to the concentration of nitrogen dioxide .
5. TEMPERATURE:-
Temperature usually has a major effect on the rate of a
chemical reaction. Molecules at a higher temperature

8
have more thermal energy. Although collision frequency
is greater at higher temperatures, this alone contributes
only a very small proportion to the increase in rate of
reaction.
6. CATALYSTS:-
A catalyst is a substance that alters the rate of a chemical
reaction but remains chemically unchanged afterwards.
The catalyst increases the rate of the reaction by providing
a different reaction mechanism to occur with
lower activation energy. In autocatalysis a reaction
product is itself a catalyst for that reaction leading
to positive feedback. Proteins that act as catalysts in
biochemical reactions are called enzymes. Michaelis
Menten kinetics describe the rate of enzyme mediated
reactions. A catalyst does not affect the position of the
equilibrium, as the catalyst speeds up the backward and
forward reactions equally.
7. PRESSURE:-
Increasing the pressure in a gaseous reaction will increase
the number of collisions between reactants, increasing the
rate of reaction. This is because the activity of a gas is
directly proportional to the partial pressure of the gas. This
is similar to the effect of increasing the concentration of a
solution.
8. PRESENCE OF LIGHT :-

9
 Light provides necessary activation energy to the starting
materials, therefore, most of the reactions becomes faster
in the presence of light. Example: Photosynthesis.

 EXPERIMENTAL METHODS :-
The experimental determination of reaction rates involves
measuring how the concentrations of reactants or
products change over time. For example, the
concentration of a reactant can be measured
by spectrophotometry at a wavelength where no other
reactant or product in the system absorbs light.
1. FAST REACTION:-
For faster reactions, the time required to mix the reactants
and bring them to a specified temperature may be
comparable or longer than the half-life of the reaction.
Special methods to start fast reactions without slow
mixing step include.

 Stopped flow methods, which can reduce the mixing

time to the order of a millisecond.
 Chemical relaxation methods such as temperature
jump and pressure jump, in which a pre-mixed system
initially at equilibrium is perturbed by rapid heating
or depressurization so that it is no longer at
10
 equilibrium, and the relaxation back to equilibrium is
observed. For example, this method has been used to
study the neutralization H3O+ + OH− with a half-life
of 1 μs or less under ordinary conditions.
 Flash photolysis, in which a laser pulse produces
highly excited species such as free radicals, whose
reactions are then studied.

2. EQUILIBRIUM:-
While chemical kinetics is concerned with the rate of a
chemical reaction, thermodynamics determines the
extent to which reactions occur. In a reversible reaction,
chemical equilibrium is reached when the rates of the
forward and reverse reactions are equal and the
concentrations of the reactants and Products no longer
change.
3. FREE ENERGY:-
In general terms, the free energy change (ΔG) of a reaction
determines whether a chemical change will take place, but
kinetics describes how fast the reaction is. A reaction can
be very exothermic and have a very
positive entropy change but will not happen in practice if
the reaction is too slow. If a reactant can produce two

11
 different products, the thermodynamically most stable
one will in general form, except in special circumstances
when the reaction is said to be under kinetic reaction
control.
The kinetic isotope effect is the difference in the rate of a
chemical reaction when an atom in one of the reactants is
replaced by one of its isotopes.

 CHANGE IN CONCENTRATION WITH TIME:-

A rate law simply tells you how the rate of reaction
changes as reactant concentrations change.

 COLLISION THEORY:-

 Collision theory used to predict the rates of chemical

reactions, particularly for gases.
 Collision theory used to predict the rates of chemical
reactions, particularly for gases.
 Rate constants use to vary with temperature.
 Consequently, the actual rate of a reaction is
significant temperature dependent.
 The rate dependence on temperature can by
explained by the “Collision Theory “.

12
  The collision theory assumes that for a reaction to
occur, reactant molecules must collide with enough
energy and the proper orientation.
 The minimum energy of collision required for two
molecules to react is called Activation Energy .
 CONCLUSION:-

 The main aspects summarized in this presentation were:

 The different ways of expressing chemical reaction
rates.
 The factors that affects the rate of chemical reactions
 The form and meaning of a rate law including the
ideas of reaction order and rate constant .
 The branch of physical chemistry that is concerned
with understanding the chemical rates .
 Factors affecting the rate of reaction:-
1. Nature of reactant.
2. Physical state.
3. Surface area of solids.
4. Concentration.
5. Temperature.
6. Catalyst.
7. Pressure.

13
 8. Presence of light .
 Experimental methods:-
1. Fast reaction
2. Equilibrium
3. Free energy
 Collision theory:-
Collision theory used to predict the rates of chemical
reactions, particularly for gases. Collision theory used to
predict the rates of chemical reactions, particularly for
gases.

 BIBLLIOGRAPHY:-

 WWW.WIKIPEDIA.COM
 WWW.PEDRO JULIO.COM
 WWW.BRITANNICA.COM
 WWWCHEMGUIDE.COM

14