SOYAL Operation Manual

V230608

Operation Manual
Enterprise Series
HTTP Server
System Requirements

Web Browser Setting Interface

Cross-Platform Services does not limit to particular operating
system, smartphone, or tablet
Provide parameter setting, user data setting, event log query
and direct control

SOYAL Website
SOYAL Operation Manual
Enterprise Series WEB Setting

Table of Contents

1 HTTP Server 1-1 Main Features ..................................................... 01

Introduction
1-2 Architecture Schematic Diagrams ....................... 02

2 Interface Overview 2-1 Log in HTTP Server page..................................... 02

2-2 Device Connection Status ................................... 03

2-3 Network Setting ................................................... 04

2-4 Event Log ............................................................ 07

2-5 User Lists ............................................................. 08

2-6 Controller Parameters .......................................... 09

2-7 User Add / Change .............................................. 11

2-8 Time Zone ............................................................ 14

2-9 Login Password ................................................... 16

2-10 Clock .................................................................. 16

3 Reference 3-1 FAQ ..................................................................... 17

3-2 YouTube Videos.................................................... 17

SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
1. HTTP Server Introduction Enterprise Series WEB Setting

1. HTTP Server Introduction

1-1 Main Features

Easy setup via Smartphone, Tablet, and PC by entering IP address of the

devices through web browser
Controller communication setting and parameter setting
Controller event log query
Add, delete, and modify user data
Remotely unlock door
Manually and directly set access controller’s time
HTTP Server is compatible for SOYAL Enterprise Series and other series
that is listen on separate manual such as SOYAL Industry Series (TCP),
AR-716-E18 Ethernet module AR-727i-V3 and Converter AR-727-CM
(refer to ‘Operation Manual AR-727-CM HTTP Server’)

HTTP Server Comparison Table

Industry Series (TCP) AR-727i-V3 Converter

Enterprise
Interface Menu AR-727-CM-0804M (AR-716-E18 AR-727-CM
Series
AR-401-IO-0808R-U2 Ethernet module)
1 Current State V V V V
2 Network Setting V V V V
Controller Setting:
Event Log /
User List / Controller
3 Parameter / User Add/
V
Change / Timezone /
Clock
4 Login Password V V V V
RS485 Setting:
5 Channel 1 Setting / V V
Channel 2 Setting
I/O Control Setting:
6 Direct Control IO 0~3 / V
Direct Control IO 4~7

SOYAL TECHNOLOGY CO., LTD 01

SOYAL Operation Manual 1. HTTP Server Introduction
Enterprise Series WEB Setting
2. Interface Overview

1-2 Architecture Schematic Diagrams

2. Interface Overview

2-1 Log in HTTP Server page

AR-837-E
XX.XX.XXXXXX
2 XXXXXXXXXXX
ID:SuperAdm
PWD:721568

02 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

1 Through PC, Tablet, or Smartphone web browser software/app, enter device IP

Address and enter HTTP Server interface (default IP Address 192.168.1.127)

2 When entering HTTP Server page required to enter ID and Password. Default
ID: SuperAdm / Password: 721568 which can also be found on serial no.
sticker that include on the packaging.
(For older version, default ID: admin / password: admin)

3 Device Model no. and Firmware Version

After logged in, on the top right side will show the controller’s model no.
including the firmware version

2-2 Device Connection Status

1 After logged in, the first menu that will automatically show Current State of
controller’s IP Address

SOYAL TECHNOLOGY CO., LTD 03

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

2-3 Network Setting

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

1 Click ‘Network Setting’ on the left side menu

2 Device Name : Rename network device, could be used to differentiate

between one device and another
3 LAN IP Address : Enter IP address designated for the device of the intranet.
Default setting is 192.168.1.127
4 LAN Net Mask : Subnet Mask of the intranet
5 Default Gateway : Default gateway of the intranet. if there is Internet
connection access, this IP address must point to the
router or the gateway provided by the ISP

6 Primary DNS Server : Domain Name Server 1

7 Secondary DNS Server : Domain Name Server 2

04 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

8 MAC Address : Network physical address (this field cannot be changed).

Each TCP/IP device has designated MAC address that could
be found on the serial number sticker

AR-727-E Product
EHR05276005 serial number
13.57.043A7B MAC Address
ID:SuperAdm
PWD:721568

9 DHCP Client : Ticking this feature will enable dynamic host protocol which
means devices will automatically obtain IP address without
manually typing and assigned device to a designated IP
address. Enabling this feature is not recommended in case
Client could not communicate with Server and it will cause
a disconnection.

10 TCP Listen Port : Communication control port, connection to 701 Software

enter 1621, connection to Mobile APP enter 1601.

11 HTTP Server Port : Web browser service port, it can be change if there is
information security consideration but should not have the
same TCP Port with 701Server connection to devices which
is 1621 For Example: changing into 9680, to enter the
HTTP Server you need to enter IP address followed with Port.

12 Socket Timeout : Handshake timeout detection, default value 120seconds,

if there is no data will be offline.

13 Node ID (Device ID) : Controller’s node ID, node ID setting in HTTP Server
must correspond to 701 Software otherwise data could
not be transmitted.Step no. 14-16 is designated for third
party system integration to choose between one way
hosting and two way hosting of Event Logs. If there is no
requirement for this, please enter Message Server IP as
0.0.0.0 and Message Port as 0 for both 1st and 2nd
Reference document:

SOYAL TECHNOLOGY CO., LTD 05

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

06 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

14 Message Server IP 1st : Transfer event log to one of the Server’s first IP address ,
active sending event logs to the designated server
st
15 Message Port 1 : Automatically send last event message port.
We offer two options:
8031 --> one way hosting, event log format is TEXT mode
8033 --> two way hosting, required acknowledgement in order
to send the next event log, event format is HEX mode
16 Message Server IP 2nd : Transfer event log to one of the Server’s second IP
address, active sending event logs to the designated server
17 Message Port 2nd : Automatically send last event message port.
We offer two options:
8031 --> one way hosting, event log format is TEXT mode
8033 --> two way hosting, required acknowledgement in
order to send the next event log, event format is HEX mode
18 Update : Press Update button to save changed.

2-4 Event Log

12

2 3

4 5 6 7 8 9 10 11

1 Click ‘Event Log’ on the left side menu to query 6 Time: Event log time recorded in hours/minutes/seconds
and monitor daily transaction record of access
controller in the system 7 Address: User Address

2 Selection page of records list Display (Alias): User Address’s display name or alias on
8
LCD access controller

Previous page specific records’ page next page 9 Access Detail: Message code with description

10 Card UID: Card number

3 Total records stored on the controller’s memory

11 Door: Door name of the access

4 Index: Events in sequence

12 When query Event Logs, click ‘Refresh’ button in order

5 YY’MM/DD: Event log date recorded in year/month/ for browser to show latest event logs recorded.
day format

SOYAL TECHNOLOGY CO., LTD 07

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

2-5 User Lists

3 4 5 6 7 8 9 10 11

1 Click the ‘User List’ on the left side menu to query all user data stored on the
controller
2 Start From: show the first user address range from the search Example start
from 199 then press ‘Enter’ it will show user list from user address 199, 200,
… 213 (one page shows maximum 14 user address)
<< : previous page / >> : next page

3 Address: User address in sequence

4 Display (Alias): User Address’s display name or alias on LCD access controller

5 Access Mode: Assigned access mode for each user will be displayed as Invalid/
Card Only/Card or PIN/Card and PIN
6 Card UID: Card number
Note: Enterprise Series Controller could control both controller and Wiegand access reader
connected to it. That way, below step will provide the display of controller (main
controller/master controller) and reader (slave reader).

08 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

7 Ma : Main in short is a setup for Main Controller’s access.

(Y=access permitted / N=access prohibited)
8 Zone: Main controller’s access time zone
(refer to 2-8 for more detail regarding time zone setting)
9 WG: setup for Slave Reader’s access
10 Zone: Slave Reader’s access timezone
11 Expiry: Date limit of user access

2-6 Controller Parameters

卡機端參數 副機端參數 ( 唯根 )
2
3
4
1 5
6
7
8

10
11
12
13

1 Click ‘Controller Parameters’ on the left side menu to query and monitor daily
transaction record of access controller in the system

2 Door Number(1~255) :
You can set door number for Main Controller and Slave Reader. This is usually
required a setting when you established door group setting and implement anti-
passback on your system where the exit and entrance is required to present
access.
3 Master Code (6 Digital) :
Master code or programming code is a six digits code that is used to access
programming mode (default value 123456)
4 Four digits arming code, enter arming code to enable arming mode

SOYAL TECHNOLOGY CO., LTD 09

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

5 Door Relay Time (0~600,601~609 for 0.1~0.9 Sec) :

After the access identification is accepted (normal access), relay is triggered to
release door. Door Relay Time indicated how long does it takes for relay to be
opened.
● Output continuously (latch mode) enter 0
● Lock release after a specific time (pulse mode)
601~609 = 0.1~0.9 sec
1~600 = 1~600seconds
※Suggestion: 15 seconds for magnetic lock and electric bolt lock; 0.2 seconds for electric
strike and cabinet lock.
Set door relay time is available for both Main Controller and Slave Reader

6 Alarm Relay Time (0~600 Sec) :

Alarm output time until it stopped triggering.
● Output continuously enter 0 (alarm keep triggering until next actions for example
close door, press push button, or swipe valid card)
● Alarm stop triggering after specific time 1~600 = 1~600 seconds

7 Door Close Delay (Sec) :

Door will be locked after specific time. If time is reached and door is not closed,
will trigger alarm as door open too long (under arming mode).
Door close delay range 1~600 = 1~600 seconds
Set door close delay is available for both Main Controller and Slave Reader

8 Force Alarm :
Enabling this function will trigger alarm under force open situation

9 Serial Port (RS485-I) :

RS485 communication setting options: Lift Controller, Controller/PC, Display
Panel, Printer.
(Default value: Controller/PC)

10 PIN Access :
Access identification via PIN can choose between two options:
M4: User Address(5) + PIN Code(4)
M8 mode: PIN Code(4) Only
For example:
User Address 250 with PIN 4879
Under M4 mode: enter 00250 4879
Under M8 Mode: enter 4879

10 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

11 Door Status : Show the current status of the Main Controller

12 Open Door (Main/WG) :

Remotely open or close door of Main Controller and Slave Reader
Options to choose: Pulse (Auto Close), Latch (Always Open), Close
After done selecting the options, click ‘Active’

13 Update : Press Update button to save changed.

2-7 User Add / Change

2
3
4
1 5
6
7
8
9
10
11
12
13
14
15
16
17
1 Click ‘User Add / Change’ on the left side menu to add, delete, or modify
user data

2 User Address :
To start modifying user data, enter
designated user address and click ‘Go to’ Previous page specific records’ page next page

SOYAL TECHNOLOGY CO., LTD 11

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

3 Display (Alias) :
User Address’s display name or alias on LCD access controller

4 Access Mode :
Assigned access mode for each user will be displayed as Invalid/Card
Only/Card or PIN/Card and PIN
5 Guard User :
Tick the box if designated user is a Guard User. Access with Guard identification
will not release lock but will be recorded on the event log.

6 PIN Code :
Four digit access PIN, can be modified from 4~8 digits refer to command
42* for keypad access controller and menu (3) Parameters (1) > (9) PIN
& UID format > User PIN length range

Step 7 8 is card UID setting :

ABA-ID WG ID
0000848795 00012:62323 MF18

7 Card UID (__:xx)WG32(5:5) / 8 Card UID (xx:__)WG32(5:5) /

u64(7~10:8) : u64(7~10:8) :
Site code, first 5 digit UID WG5:5 or Card Code, last 5 digit UID WG5:5
HEX 4~7/64Bit or HEX 0~3/64Bit

Step 9 10 11 12 is Time Zone setting to set user access on specific time zone for
Main Controller and Slave Reader. Time Zone settings please refer to 2-8.

12 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

9 Main Door Access :

Enabling access time zone for Main Controller
10 Time Zone :
Set access time zone for Main Controller, 0=free zone or set between 1-62 if
access time zone is set on manual part 2-8

11 WG Door Access : Enabling access time zone for Slave Reader

12 Time Zone :
Set access time zone for Slave Reader, 0=free zone or set between 1-62 if access
time zone is set on manual part 2-8

13 User Level(0~3) :
User access level options between 0~3. User Level must be correspond to Time
Zone Level and Door Group Level to confirm access identification required by
user.
The reason is that we use Level Comparison Function to realize;
In “Card and PIN” Access Mode, the User Card can access the door with Card
Only if its level is higher than both Time Zone Level and Door Group Level; the
User Card can access the door with Card and PIN if its level is equal to both
Time Zone Level and Door Group Level; can’t access the door if its level is lower
than Time Zone Level or Door Group Level.
Level Comparison Rule Chart
User Level Time Zone Level Door Group Level Access Mode
1 0 0 Card Only
1 1 0 Card and PIN
1 0 1 Card and PIN
1 1 1 Card and PIN
1 0 2 Cannot access
1 2 0 Cannot access

Level Comparison Chart for the example

User Level Time Zone Level Door Group Level Access Mode
Group 001: level 01
02 00< User level 02 Card Only
< User level 02

Group 002: level 02

02 00< User level 02 Card+ Pin+#
= User level 02

SOYAL TECHNOLOGY CO., LTD 13

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

Step 14 15 16 is Date Limit setting to allow access only in between start day and
expiry day.

14 Access Date Limit : Allowing user access in between date limit by ticking the box

15 Start Day (YY-MM-DD) : User starting date to have access

16 Expiry Day (YY-MM-DD) : User last date to have access

17 Update : Press Update button to save changed.

2-8 Time Zone

2 3 4

1
5 6 7 8 10

1 Click ‘Time Zone’ on the left side menu to set time zone in a week.

2 Level :
Time zone level differentiate between 0~3, User with higher level index number
is allowed to access those time zones or door groups with lower level index
numbers. (3 is the highest authority)

3 Link to :
Setting a set of time zone that could link to other time zone for compound setting.
0=free access, 64=END (no linking to other timezone)

4 Holiday :
Access time zone setting is for daily basis, if required to activate particular time
zone on holiday edit, please tick the box. Holiday edit can be set on 701Client
software.

14 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
2. Interface Overview Enterprise Series WEB Setting

Step 5 6 7 8 9 is a setup for Time Zone in a weekday (Sun-Sat)

Note: setting time zone control period must be in 00:00~23:59 format.

Conditions:
● If there is a gap in between, please separate the time zone into two different zone.
● If it time zone setting exceed midnight, please separate the time zone into
two different zone (refer to example of zone 3 & zone 4).

Example of correct setting:

Zone 1
Weekday Zone 2 Zone 3 Zone 4
(open for public time)
SUN 08:00-12:00 13:00-17:00 00:00-00:00 00:00-00:00

MON 08:00-12:00 13:00-17:00 22:00-23:59 00:00-07:00

TUE 08:00-12:00 13:00-17:00 22:00-23:59 00:00-07:00

WED 08:00-12:00 13:00-17:00 22:00-23:59 00:00-07:00

12:00-13:00
THU 08:00-12:00 access is 13:00-17:00 22:00-23:59 00:00-07:00
prohibited, does
FRI 08:00-12:00 not required to 13:00-17:00 22:00-23:59 00:00-07:00
create zone
SAT 08:00-12:00 (gap) 13:00-17:00 00:00-00:00 00:00-00:00

Holiday V (allow)
Zone 3
Zone 1 Zone 2
(incl. access to
(incl. access to (incl. access to
Link End Zone 4 + Zone
Zone 2+ Zone Zone 3 + Zone
3+ Zone 2 +
1) 2 + Zone 1)
Zone 1)

5 Weekday : Weekday options

6 Hour : Starting Hour

7 Minute : Starting Minute

8 Hour : Ending Hour

9 Minute : Ending Minute

10 Update : Press Update button to save changed.

SOYAL TECHNOLOGY CO., LTD 15

SOYAL Operation Manual
Enterprise Series WEB Setting 2. Interface Overview

2-9 Change Login Password

2
3
4

1 Select ‘User Password’

2 New Password : Enter new password (there’s capital letter differentiation)
3 Password Again : Retype the new password
4 Update : Press Update button to save changed.

2-10 Clock Setting

2
3
4
5
6
7
8
1

1 Click ‘Clock’ on the left side menu 5 Hour : 2 digit, 24H format
to manually change clock of the
controller 6 Min : 2 digit

2 Year : 2 digit, example: 2021 enter 21 7 Second : 2 digit

3 Month : 2 digit
8 Press Update button to save
4 Day: 2 digit changed.

16 SOYAL TECHNOLOGY CO., LTD

 SOYAL Operation Manual
3. Reference Enterprise Series WEB Setting

3. Reference

3-1 FAQ

Why IP readers show offline, but you can enter to its webpage settings?

How to change IP Address for LCD Screen of EV5 Series Controller?

Why IP readers always show online/offline alternately and not all transaction log can be
received timely?

3-2 YouTube Videos

《SOYAL APP & WEB》E Series Controller Http Browser Steps

SOYAL TECHNOLOGY CO., LTD 17